Network Utility / Netstat - look up server connections for a certain app?

How to look up server connections for a certain app? I know this is possible since its a very general task but not sure how its done. Detail explanation would be appreciated, thanks in advance!

Netstat works for current connections, but a more robust tool for you might be Little Snitch.

Similar Messages

  • How do I turn OFF push notifications for a certain app; specifically yahoo mail?

    How do I turn OFF push notifications for a certain app; specifically yahoo mail?

    Settings>Mail, Contacts, Calendars>Fetch New Data>Push>Off.

  • How do do I ask apple to make a bug fix for a certain app

    How do I ask apple to make a bug fix for a certain app.

    If it is an Apple app go here:
    Apple - iPod touch – Feedback
    If a it is a third-party app then go to the developers website and you should find out how to ask them.

  • How to update db server connection for objects in business view

    I had to migrate to a new SQL server for my main user database (sql 2008)
    crystal itself is fine, and I have updated all of the reports to use a different connection string.
    but I had forgotton about the dynamic dropdownlists in business view..
    what is the best way to update the connection for those ??
    I will go through each one manually if I have to.. but was hoping for something a little easier
    thanks for any help !

    Hi
    Open the config.cfg and then change the JdbcPasswordEncoding=Intradoc to JdbcPasswordEncoding=ClearText and then enter the new password in JdcPassword=<new passwd> . Save the file and then restart the CS. It should get going from there.
    Srinath

  • Network Utility netstat does not respond

    I am unable to obtain a response from netstat on 3 of 4 options within the network utility. I obtain comprehensive stats but all others see no feedback. I see netstat command line will respond but do not see corresponding entry in network utility
    Software  Mac OS X Lion 10.7.2 (11C74)
    Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA:
      Name:          ethernet
      Type:          Ethernet Controller
      Bus:          PCI
      Vendor ID:          0x11ab
      Device ID:          0x4362
      Subsystem Vendor ID:          0x11ab
      Subsystem ID:          0x5321
      Revision ID:          0x0022
      Link Width:          x1
      BSD name:          en0
      Kext name:          AppleYukon2.kext
      Location:          /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleY ukon2.kext
      Version:          3.2.2b1

    looking at this again, when I executed netstat -rn in command window, command respnds immediately.
    time netstat -rn
    Routing tables
    Internet:
    Destination        Gateway            Flags        Refs      Use   Netif Expire
    default            192.168.2.1        UGSc          167        0     en0
    127                127.0.0.1          UCS             0        0     lo0
    127.0.0.1          127.0.0.1          UH              2      964     lo0
    169.254            link#4             UCS             0        0     en0
    192.168.2          link#4             UCS             6        0     en0
    192.168.2.1        0:26:82:fa:0:40    UHLWIi        176     3454     en0   1160
    192.168.2.11       58:55:ca:26:ae:3d  UHLWIi          3      215     en0    664
    192.168.2.12       127.0.0.1          UHS             1        0     lo0
    192.168.2.15       70:de:e2:44:e7:d0  UHLWIi          0        1     en0    665
    192.168.2.18       34:15:9e:a4:98:77  UHLWIi          0        0     en0    568
    192.168.2.255      ff:ff:ff:ff:ff:ff  UHLWbI          0        7     en0
    Internet6:
    Destination                             Gateway                         Flags         Netif Expire
    ::1                                     link#1                          UHL             lo0
    fe80::%lo0/64                           fe80::1%lo0                     UcI             lo0
    fe80::1%lo0                             link#1                          UHLI            lo0
    fe80::%en1/64                           link#5                          UCI             en1
    ff01::%lo0/32                           fe80::1%lo0                     UmCI            lo0
    ff01::%en1/32                           link#5                          UmCI            en1
    ff02::%lo0/32                           fe80::1%lo0                     UmCI            lo0
    ff02::%en1/32                           link#5                          UmCI            en1
    real          0m0.011s
    user          0m0.001s
    sys          0m0.003s

  • Error in creating new DB Server connection for DB2 in Websphere 5.1.2

    I am getting the a error messagebox containing the following message
    IWAS0126E Problems encountered while trying to establish connection Con1,
    Reason: 'A communication error has been detected. Communication protocol
    being used:{0}. Communication API being used: {1}. Location wehere the
    error was detected: {2}. Communication function detecting the error: {3}.
    Protocol specific error codes(s) {4}, {5}, {6}. TCP/IP SOCKETS Reply.fill()
    InputStream.read() socket closed (code=) * 0'
    while creating a new DB Server connection from Websphere Application Developer 5.1.2.
    I am using
    Vendor Type: DB2 Universal Database v8.1
    JDBC Driver: IBM DB2 Universal Driver
    It need host name, port, Database name, userid, password to be specified.
    But, a connection can be established fine, if I am trying it from a simple Java program with JDBC with the exactly same parameters.
    However I am able to create a new DB server connection using APP Driver
    i.e.
    vendor type as "DB2 Universal Database Express v8.1" and Driver as "IBM DB2 APP DRIVER". No host name or port need to be specified in this case.
    But, if the database is in different machine then it will be a problem.

    Caused by: java.net.ConnectException: Connection refused
    Is the Oracle application server running?

  • Z10 - No Data Network Connection for Several Android Apps

    Hi,
    I'm using freshly installed 10.2.1.2102 software on a BlackBerry Z10 (STL100-3).
    Everything runs smoothly except for several Android Apps dwnloaded from Snap or Onemobile.  They work perfectly fine over WiFi but not at all over Data.  Does anyone know why or if there is a solution? It's pretty frustrating.
    Examples include, NetFlix, MyFitnesspal, Amazon Price Check Urbanspoon, etc.
    Thanks for any replies.

    you can hard restart you device. and try again
    Ades Ganteng

  • Looking for a certain app.  can you help...

    I am going flying in a little cessna tomorrow. This will be my 2nd lesson. The instructor is happy for me to have my iphone on and it doesn't have to be in flight mode.
    What this means is I can use the GPS to track the flight. I am looking for a particular app that will use the GPS and plot my track and allow me to place this over a google map or even google earth to show exactly where I have flown.
    I have used a similar app for running (RunKeeper) and also another called iTrial but didn't like that one much.
    Is there any you can recommend?
    Thanks
    Mark

    If you go to the iTunes App store and look in the Navigation category there are many apps related specifically to flying.
    For what you specify, GPS Recorder might be the one to check out. I've not used it, though, so YMMV.
    Phil

  • No internet connection for some android apps l

    I m using BlackBerry z10, nd I ve issues with some android apps like line, tru caller, and other some apps, my internet plan is activated but internet is connecting with these android apps, it was working properly untill I updated the latest software version of phone, plz tell me good solution..urgenttt

    Do you get an error message when you try to connect to the router?

  • Photosmart 5520 connected to network, but keeps disconnecting from server (internet) for ePrint

    I just bought a new Photosmart 5520 and love it.  Everything works EXCEPT the HP ePrint service.  My printer is always connected to the network, but when I connect the ePrint, it would work for no more than 10 minutes before I get the message "The printer was unable to connect to the server.  Check the internet connection and try again".  The thing is, the printer is ALWAYS connected to the network, but gets kicked off the internet, rendering ePrint useless.  Anyone know the problem?  My router is a Netgear 7550 and my ISP is Frontier.  Please help

    Hi deskdownstairs,
    I see that you're having problems setting up ePrint.  I would try the steps below.
    1. Obtain your printer's IP address
    a. This can be done by pressing the wireless icon on printer.
    2. Enter the printer's IP address in a browser.
    3. Select the network tab at the top of the page.
    4. On the left select networking.
    5. Select Network Address (IP)
    6. Select Manual DNS Server
    a. Manual Preferred DNS should read 8.8.8.8
    b. Alternate DNS Server should read. 8.8.4.4
    7. Select apply you might get a warning just select okay.
    Let me know how it goes.

  • Lost server connection for emails

    I have lost connection to my server for my emails. It has worked ok for a year &amp; has suddenly stopped. I can still access the Internet. My email provider is NTL. Does anyone have any suggestions? I've checked all my details are correct.

    This Apple doc might help ya out -> iOS: Unable to send or receive email
    Does your iPhone connect to the email server on another Wi-Fi netowrk?

  • Lose server connection for pictures

    Only some pictures are recognized within an email and it keeps saying it has lost the connection with the server?

    Hi,
    Are you sure create managed server correct? You can create managed server and cluster on weblogic application server. like here http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/wls/10g/r3/installconfig/config_mngd_srvr/manage_wls_server.htm
    if your cluster and managed servers truely created All servers shown in listed servers .
    please visit this video . http://www.youtube.com/watch?v=o2RcGx126cA
    thanks
    juddi

  • Long time computer user looking into server techs for the first time

    Hello there,
    I was hoping to get some guidance on if we should upgrade to a server or not. We run a small three person business from our home doing audio and video work. Our main goal is to keep things organized and digital organization is not our strong suit as artists.
    So, we would need large shared space for media and project files (gigabit ethernet is fine) as well as a large shared Time Machine for our three workstation's system drives. Also, the idea of a shared ical and shared contacts would be really helpful. None of this needs to be open to the public over the internet (security from the internet is greatly preferred), all just needs to be accessed via ethernet and local wifi via AirPort (iPhones for shared contacts and ical).
    The only thing stopping us is the idea that a lot of this can be done without the $500 server software and the headaches of setting up something completely new to us. I have tried asking some Apple store reps for advice but have yet to find anyone there that can give me a for sure answer, which is why I am here to get some professional opinions. So the question, do we need to go the server route to have all these features even though none of it will go though the internet?
    Any help would be greatly appreciated!
    Thanks all!

    do we need to go the server route to have all these features even though none of it will go though the internet?
    "need"? no, but you might prefer to do so.
    Let me explain.
    First off, there's nothing in Mac OS X Server, per se, that says it's designed for internet-facing applications. Sure, some of the services are internet-leaning, but don't think that internet/non-internet is the deciding factor of whether to use Server over client.
    The fact is that much of what you describe can be done via Mac OS X Client, but it can be done much easier with Mac OS X Server. You might find that the hours you save, and the productivity you gain far outweighs the cost of Mac OS X Server.
    Case in point, you have three workstations, right? Is each one used by an individual? or are they shared?
    If they're shared, would it be easier for any user to be able to log on at any workstation and get their normal desktop environment, preferences, etc? That's something that's easy to do with Mac OS X Server, but not via Mac OS X Client.
    You've already touched on shared iCal and contacts, neither of which are part of Mac OS X client, so you'll have to decide how much they're worth to you.
    At the end of the day, you'll have to decide for yourself. Of course, you could take the easy option and defer until Mac OS X 10.7 (Lion) comes later in the summer, in which case the server functions are included as optional installs for no additional cost (i.e. buy client and get the Server for free).

  • Server requirement for Oracle BI Apps Implementation

    Hi All,
    We are planning to have two node Oracle BI Apps 7.9.4 implementation on UNIX box. In our implementation, we are planning to have Informatica server on Data warehouse database Box and all other components on the other box.
    I want to know how should i go about sizing the server which i am going to have for informatica & Data Warehouse database? Is there any document for identifying the server CPU & RAM sizing etc. for such implementation.
    Any help in this regards would be of great help for us.
    Thanks,
    Prasad N

    Prasad,
    Did you review the documentation and find it did not answer your specific questions?
    This page contains installation documentation and release notes for Oracle Business Intelligence Applications.
    http://download.oracle.com/docs/cd/E10783_01/doc/nav/portal_1.htm
    System Requirements and Supported Platforms
    http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10920.pdf
    Chris

  • No internet connection for Qt kde apps

    Hi guys , after the last update of kde I've got this weird problem ,
    I'm using firefox for the moment and it works fine and has no problem with the connection
    konqueror and other kde apps don't have inter connection like choqok for example
    also the widgets are having the same issue

    Next to the "check for updates" button it says iTunes will automatically check on a certain day (that day being tomorrow) but what if I want to check before that day to make sure everything is up to date
    Then click on the Check for updates button.
    Note that this is for the iPod updates only. This doesn't check for updates to iTunes.
    iTunes pref -> General is where you set to check for iTunes updates.
    Make sure your firewalls (Windows, Norton, router)allow iTunes access.

Maybe you are looking for

  • Error 2 when downloading itunes

    Tried downloading itunes 11 for the first time on my computer. No luck keep getting error 2. Tried extracting the files and no luck still. Is there any other ways I can get it on my computer? Thanks in advance!

  • 2011 macbook connecting to projector

    i have an 2010/2011 Macbook Pro and I'm trying to connect it to a project. Last time I connected to a projector it just started up (2011) this time I have been trying to connect it and nothing happens. below is my Displays screen where  you'll see th

  • Problems with widescreen

    I recently purchased a 2nd gen apple tv.  My problem is some movies or shows wont display in widescreen even though they are new.  On some movies it will switch between widescreen and the normal view with two bars on each side by itself. I have even

  • S_ALR_87012357 update document, what filed ?

       Hello All , When we run the VAT reprot S_ALR_87012357 with Update document selected, what is the filed / table that are impacted with this option ? Is there a way to see all documents 'updated' by the VAT report and  where is this flag ? Thank you

  • Ipad 1st gen blank screen

    when i turn on my ipad 1st gen (32gb) the apple logo comes on like normal then my screen goes blank but it carrys on working as normal, i can unlock the ipad (from memory) click on apps but cant seeing nothing