New battery, now won't recognize ipod on computer...

so i've got this 4th gen. ipod (30gig) and i replaced that battery myself.
everything went well.
it works, it plays, it WAS connecting to computer (via it's firewire cable).
but, all of a sudden, it stopped connecting to ANY computer.
it charges when plugged into a firewire outlet (i get the charging battery icon on the ipod), but no computer will recognize it to transfer music...
it plays with headphones. it plays in a bose dock, but no computers.
i went thru the '5 steps', resored, reset, everything.
any ideas?
thanks for any help.

Well I finally fixed my problem, I dropped itunes and have started using MediaMonkey http://www.mediamonkey.com/ which comes with ipod support that actually works(unlike my itunes).
http://www.mediamonkey.com/device-plugins.htm

Similar Messages

  • After transferring music to new Mac, Mac won't recognize iPod

    I just recently transferred my music from a PC to a new Powerbook G4 using my iPod in disk mode. I erased everything on my iPod, then loaded it with music in disc mode to put on my new computer. But now, I need to erase the stuff on there in disc mode so I can put it back in the normal mode.
    Just when I thought I was figuring it out, my Mac won't recognize my iPod. Do I need to reformat it for a Mac since I was using it with a PC? Be gentle, I'm new to Macs and don't know the lingo or my way around very well yet.

    Exactly what steps did you follow?
    1. what do I do with original iTunes folder?
    It's on your old computer.
    What do you want to do with it?
    2. how do I get iTunes to read/ingest playlist and songs?
    If you copied the entire /Music/iTunes/ folder from old computer to /Music/ on new computer then you simply need to open iTunes.
    Since it is the exact same library, everything will be there as it was on old computer.

  • Itunes erased most library music and now won't recognize ipod

    My itunes library just kind of erased all of my songs except a couple. Now when I try to connect my ipod up to it, it tells me that I have to erase everything on my ipod except those couple of songs to be connected to the library. Now I can't download new songs or anything to my ipod without itunes. Please, PLEASE help, i'm desperate!

    If I try transfering my purchases from the ipod to the library, would it erase my ipod stuff?

  • Downloaded iTunes 9 and now won't recognize ipod

    I have an ipod classic(80gig)that's about 2 years old.
    I just had to buy a new computer last week, and after installing the latest version of itunes, it doesn't recognize my device.
    It will charge the ipod though.
    I just got back from the Apple store and they checked the ipod out and said there was nothing wrong with it, and it also shows up, or is recognized, on their master system.
    Can someone please help me?

    Okay. We'd probably better check on the USB drivers. NB ... in the following document, where it says:
    Type C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers in the "Search for driver software in this location" field.
    Note: If using a 64-bit version of Windows Vista or Windows 7, type C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers in the "Search for driver software in this location" field
    ... the "Note" is wrong for an iTunes 9.0.2.25. AMDS is 64-bit nowadays, so it lives in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers location for you.
    Here's the document:
    [iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date|http://support.apple.com/kb/TS1538]

  • Upgraded to iTunes 11 on Snow Leopard, now won't recognize iPod Touch 2G?

    iTunes 11 doesn't seem to want to recognize my iPod Touch 2nd Generation.  Tested out my iPod Nano 4G, and it connects fine.  I've tried rebooting the Touch and restarting my computer, but to no avail.
    Any suggestions?

    Hi Parraga,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Judy

  • Itunes won't recognize ipod, but computer will

    my ipod recently crashed, and I lost all my songs. At first, whenever I plugged it in, it would be super slow, and it would show up on the computer as this white thing, i'm not sure what it is, but not the ipod icon. Now, after I set my ipod on disk mode, it shows up on the computer as my ipod, but still it does not appear under the devices in itunes. Usually, when you plug in an ipod, itunes automatically comes up, but it took a really long time for it finally to appear.
    Any ideas?
    help would be greatly appreciated!

    Any help here:
    iPod appears on the Mac OS X desktop but not in iTunes.
    Incidentally, this is a Windows forum.

  • I bought a new time capsule.  When I try to set it up, at the end, it says an expected error occurred.  It now won't recognize my time capsule.  What do I do?

    I bought a new time capsule.  When I try to set it up, at the end, it says an expected error occurred.  It now won't recognize my time capsule.  What do I do?

    Do not setup a TC over wireless.. it is like sitting on the branch you are sawing off.
    Plug it into the computer by ethernet.. press and hold the reset until the front LED flashes rapidly and start over.

  • Yosemite upgrade - Bluetooth now won't recognize LG Tone

    Yosemite upgrade - Bluetooth now won't recognize LG Tone, won't appear on discover list, what now...?

    What are you trying to do?
    Barry

  • New ipod, system won't recognize ipod

    My sister already had an ipod on this computer. I got one over the weekend and put some music on it using another computer than my home computer. I came home and plugged my ipod in but the system won't recognize it. Every few tries it recognizes it and says its corrupt. Any info is appreciated. Thanks and happy holidays.

    HI.... I just gt a new video iPod.... I already had
    iTunes and music from the music store from a previous
    iPod, so I just downloaded the latest iTunes
    software... I downloaded the atest iPod updater
    software too... So, I plug in my iPod, and the "DO
    NOT DISCONNECT" screen comes up, and my iPod is
    recognized in My Computer, but is not recognized in
    iPod Updater OR in iTunes... has anyone else had this
    problem??? if so, have you fixed it. if you did...
    HOW?!?!?!?!
    SOMEONE PLEASE HELP ME!!! IM UPSEETTTT AHHHHHH
    Hi there
    I have a possible solution.
    Justre-install your iPod updater
    This worked for me, and I hope it works for you too!
    Sincerely
    Matthijs

  • Computer harddrive crashed, now restored, won't recognize iPod Shuffle

    Hello,
    My hardrive crashed and after the restore, I've lost all my playlists. I reinstalled iTunes, then connected the Shuffle, but iTunes won't recognize the Shuffle. I guess it would normally appear under "Store" on the left side of the iTunes page.
    Please advise.

    When I connect it to a powered port on the right side of eMac, I get no recognition from iTunes (or desktop).
    Other USB devices used are keyboard and printer. (Soundsticks II in audio hole - unrelated I figure.)
    iPod flashes green once, orange and green once, and then to orange flashing.
    When installed both iTunes 5 and 5.0.1, computer wouldn't shutdown properly initially. I had to unplug powercord. And initial update of 5.0.1 bogged down and I had to force quit and try again.

  • IPod full but now won't recognize any files; how to fix without "restore"?

    My iPod mini suddenly won't recognize any of my files or extensive playlists. I just uploaded several songs to it, and when I disconnected and tried to play it, it suddenly showed as completely empty, like I'd deleted everything. I plugged it back in, and while nothing shows up in iTunes with - no songs, no playlists - it says it's still nearly full.
    Reading another thread, I found the files on the iPod through My Computer. So they are still there, but for whatever reason the iPod, literally suddenly, can't recognize them as present. How do I fic this WITHOUT having to restore the iPod and then re-add those files (and recreate all of my playlists?)
    Please, please help!

    See this.
    What to do if iTunes displays a corrupt file message.
    And this thread.
    Da Gopha's corrupt file info.

  • ITunes and iPod updater won't recognize iPod

    I'm running Windows XP and it shows the iPod is there but it won't show up in iTunes and iPod updater after 'initializing' for a good 5-10 minutes says either 'could not recognize the iPod' or if it does let me restore give the 'Firmware update failure. Diskwrite error.' I have the latest iTunes and iPod update and went through all the steps in the 'Windows recognizes iPod but iTunes does not' Troubleshooting help section. All these problems started when I tried to update with the new iPod updater software and got an error, everything worked fine before. I have also tried using a friends USB cable the problem is obviously in the Nano itself. Is there any way to safely format without using the iPod updater? or what should I try doing next?
    Also it seems like when the nano isn't plugged into a power source it drains the battery, with nothing showing on the screen because it always starts charging when I hook it up to the computer even though it was fully charge before.
    Thanks for any help.

    Hello,
    I too am having this exact same problem. My iPod nano was working perfectly until this "latest update" Since I installed that update my itunes and my ipod updater will NOT recognize my iPod. I am getting all the same error messages as you.
    I have done EVERYTHING recommeded in the support pages. Reinstall, uninstall, install, reboot I've done it all a hundred times. I have over 5 pages of support documents I printed up and I followed them to the T. I have 10 different USB ports including 3 2.0 USB ports. My windows recognizes the iPod instantly, but the updater will not.
    I 'm starting to think it's a problem with the update software.
    Please, if anybody has any advice other than "www.apple.com/support/ipod" please post something. I have had my Nano since October and never had a problem with it and I really, really miss it right now.
    Thanks
      Windows XP  
      Windows XP  

  • Low batter screen when plugged in; Computer won't recognize iPod

    My iPod stopped working two days ago. When I try to turn it on the screen stays blank. I've tried resetting it (holding down all buttons), and the screen remains blank.
    When charging, the display flashes on to the "charging, low battery" screen, then goes back to black.
    I've left it to charge for 24 hours, and I get no response.
    My computer (and iTunes) won't recognize it when plugged in. I've tried manual searches, USB function scans, checked my cords, re-installed iTunes, and still nothing happens.
    Once iTunes did recognize the iPod, and said it "detected a device in recovery mode". I let it go on, but when the recovery pack was done downloading I got an eror #1602 pop-up telling me the device could not be detected.
    Is this a battery issue? Can I fix my device, or is it a lost cause?
    Thank you for your time.

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Mac & iTunes 10 won't recognize iPod

    I recently updated my iTunes to the new version (10 I believe) and now my computer (OS 10.5.8, MacBook) and my iTunes won't recognize my iPod. The USB is working as it charges, but the iPod doesn't show up on the desktop or in iTunes. I've restarted the iPod and still nothing... any ideas? Thanks in advance.

    Hi there! I'm on the same case. My ipod classic 160 GB (bought in 2007) have been working fine until I updated to MAC OS to 10.6 and the itunes 10. I read a lot of discussions here and it looks like the itunes 9 and 10 i guess, have problems with the classic ipods, specially with those bought on 2007.
    There's a lot of people with the same problem.
    The itunes says my ipod it's corrupted and the ipod needs to restore, also in the finder doesn't appear. It's the same within irip, senuti or xilisoft that doesn't recognize.
    At this moment I try a lot of things to fix the problem, but nothing works... and the disk utility says the disk couldn't be repaired.
    I need to format it, but before I need to back up my files.
    I will try Floola and also I will try Disk Warrior to back up my songs. (150GB of music!)
    So sad that Apple doesn't say a lot about this big problem.

  • ITunes won't recognize iPod Nano (1GB, 1st generation)

    I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
    I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
    Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
    I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
    http://docs.info.apple.com/article.html?artnum=93716
    I restarted my iPod service - no luck
    I removed iTunes - no luck
    I emptied my Temp directory and restarted...
    That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
    The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    INTEL_ D945GCL_
    iTunes 7.3.2.6
    iPodService 7.3.2.6 is currently running.
    iTunesHelper 7.3.2.6 is currently running.
    Current user is an administrator.
    The current local date and time is 2007-08-30 11:53:26.
    Connected Storage Devices:
    Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
    Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
    Unidade de disco, Apple iPod USB Device, Bus Type USB
    Universal Serial Bus Controllers:
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Universal PCI to USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information:
    IPOD (H:\), iPod nano running firmware version 1.3.1
    All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the disgnistics says exists and reads... ?!?!?!
    If anyone could shed some light on my situation, i would be VERY greatful!

    My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

Maybe you are looking for

  • Language Session table in EBS

    Hi friends, In oracle EBS R12.1.3 we have two language preference options like 'AR' for Arabic and 'US' for English. Soon after the user changes the respective language and logs into the EBS application, those change languages will be stored as a cod

  • New line break and extra blank space characters disappear after submit form?

    Hello, I have a PDF form with a Submit button that is dynamically created in my code to send the form data to the server in HTML format. After the form data is received on the server side, all strings with new line break and extra blank spaces are go

  • Where are Filters menu in Flash CS4.

    According to flash documentation Filters are in PROPERTIES panal.But Filter are  not available. Plz some one help me. Thanks

  • Compiling differently for debug and release

    I want to produce slightly different .class files for my debug and release compilations. For debug, methods like toString() should return rich information which should not be present in the release version. In fact, I want most of my debug specific c

  • Exception in Transport

    i have a problem, there are the exception: 07/08/06 16:16:18 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0) initialized 07/08/06 16:16:47 DEBUG: not loading system providers in <java.home>/lib 07/08/06 16:16:47 DEBUG: successfully loa