New Changes not reflecting in Quality Box.

Hi,
I have made changes to the Selection screen of a report in Development Box and released the transport request to Quality Box.
The transport got released without any errors to the Quality Box , but I still cant see the Selection screen changes made to the report.
I checked the version of transport in Quality box and also the Abap code. They are the same as in Development. But it does not show the Selection screen changes made in Development box.
In Short (Development Box shows the changes , Quality box although transport is released shows no changes)
What could be the reason.
Rohit

Hi Rohit,
You can try to regenerate the navigation index for the program.
Goto main program in quality (SE38) --> Source Code Editor --> Utilities --> Update Navigation Index.
Hope this may help you.
Regards,
Santosh

Similar Messages

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Changes are not reflecting in Quality server

Dear All,
We have recently installed the Portal 7.4 servers.
Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation) we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on click of import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
Regards,
Ramana.

Dear Ervin/Jun Wu,
Thanks for the Responce.
As per the given link the track is configured with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
Please check the below log regarding deployment when we do the import
SDM-deployment-notification Log file.
20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
20141028125231 Info :Deployment is performed asynchronously.
20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
20141028125231 Info :
20141028125231 Info :RequestId: 152
20141028125231 Info :==> no resulting DCs for deployment
20141028125231 Info :Follow-up requests:
20141028125231 Info :
20141028125231 Info :
20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
Regards,
Ramana.

Updated new email & password in itunes but changes not reflected in iphone

I'm using iPhone4 and have updated my new email address and got a new password in my itunes account but the changes are not reflected in my iPhone so i cannot purchase apps with the iphone, only when connected to the store on my computer. Please tell me how I fix this problem?

And I tried syncing my phone after making the changes and it still isnt working.

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Changes Not reflecting in NWBC client

Hi Gurus,
We have done some changes to add an Application in ESS Launchpad which is working fine when launched from NWBC for HTML
Link in NWBC for HTML :
When same link is accessed from NWBC Client changes are not reflected. we are using NWBC 4.0 PL9 and we have cleared all the cahce in Extended support .
Link in NWBC Client:
Any input is welcome, I have searched all the usual places however havn't been able to find anything helpful on this particular issue.
Best Regards,
Ashish Sachdeva

Hi Samuli,
Thanks for your inputs. We would check on the pointers mentioned by you.
I am working with Ashish on the same issue. The link Ashish is referring here is the Open enrollment link under benefits.
The link appears automatically if we maintain adjustment reason in 0378.
It is appearing in NWBC for HTML but not for desktop client when we login with the same userid.
We are experincing this almost all are test users in the development and quality systems.
Thanks,
Sahiba
Message was edited by: Sahiba Gandhi- 8/21/2014
To check the cache thing , I just made a quick test. My test user for which Open enrollment link was not appearing was earlier mapped to some user say XYZ at 105/001.
I got a new userid created say ABC and mapped at 105/001 for the same test pernr and I am able to see the Open Enrollment link now.
I am quite sure now that it has to do with some Cache refresh at user level.
Any inputs are highly appreciated.
Thanks,
Sahiba

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

New field not reflecting in Table maintenance generator

Hi Experts,
I have added a new field in a ztable.I regenerated the table maintenance generator,so that the new field is reflecting in devlopment system , also a TR got created.When i moved this TR to pre-production system new fields are reflecting in the structure of table but not in table maintenance generator.
Please suggest solutions.
Regards,
Niranjan

Hi Experts ,
I have gone through the steps which is mentioned.But still issue is pending,the changes in TR are not reflecting in pre prod.
Error after moving the TR with "Definition of a Maintenance and Transport Object".
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLZFGL " in include "LZFGL$03
" in
line 13:
"Field "ZCHAR_FIXED_WIDTH" is unknown. It is neither in one of the spec"
"ified tables nor defined by a "DATA" statement. ."

Type defs changes not reflected in block-diagram constants?

I'm struggling with strict type-defs today.
If I create a strict type-def, say of a cluster with an enum in it, and save it. Then create a block-diagram constant from the strict type-def in a blank vi. Then make changes to the strict type-def (say, add another item to the enum), the block-diagram constant ghosts out , as it should. If I then select "Apply changes" from the strict type-def menu, the ghosted block-diagram constant becomes un-ghosted, as it should. BUT, it hasn't update!? If I look for the new item in the enum, it isn't there!? I'm sure it should be, right?
No changes that I'm making to my type-defs or strict type-defs are being reflected in my block-diagram constants (which are definitely still linked to the controls with "Auto-update from type-def" checked on). It does work for front panel controls and indicators though - just not block diagram constants.
I'm using LabVIEW 8.5.1, Win XP Pro. Any ideas anyone?
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Solved. I think.
I tried a range of type-defined controls, including an enum, a ring list, a cluster with an enum inside it, and a cluster with a ring list inside it.
Changes to the enum items were reflected in all vi controls and block diagram constants.
Changes to the ring list items were not reflected in the controls or block diagram constants.
This snapshot shows the the last item available in each ring and enum list. Clearly the rings were not updated when the custom controls were. (Yes, I applied changes and saved too).
Switching to strict type-defs only impacted the front panel controls, as Ben highlighted, because this is GUI related. You can see from this second snapshot where all type-defs are now strict type-defs that all enums and rings updated to reflect all three items, but the block diagram rings are still out of date
I expect somebody will tell me now that this is normal behaviour???
Message Edited by Thoric on 09-10-2008 02:31 PM
Thoric (CLA, CLED, CTD and LabVIEW Champion)
Attachments:
custom_control_test.jpg ‏53 KB
custom_control_test_stricttd.jpg ‏54 KB

Universe export - data changes not reflecting in Report

Hi
The changes and the latest updates in the database are not reflecting in reports,
even if i export the universe again.
and i have refreshed the reports, that even not reflecting.
i did Edit query and Run query this action also not bringing the latest data to reports
why this happens ?
how to solve this issue ?
Regards
Dineshkumar

You can search for KB articles on SAP Service Market Place .
Here is first :
Symptom
You make changes a local Universe in Designer.
When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
Reproducing the Issue
Using BusinessObjects Desktop Intelligence XIR2 SP3:
Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
Make a simple change to the universe (like renaming a field/ object name) and save these changes.
Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
This will not show the latest changes.
However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
Cause
This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
Resolution
In Desktop Intelligence menu, go to: Tools > Universes
Click 'Refresh'
Select and 'Import' your universe
Next, go to toolbar menu: Data > Edit Data Provider
In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
Only after following these actions will the .unv ammendments be visible in the report.
Here is second :
Symptom
Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
Environment
BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
Reproducing the Issue
Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
1. Log in to Designer
i) Import Island Resort Marketing
ii) Go to Universe Parameter >> SQL
ii)Uncheck Allow Selection of Multiple Context
2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
i) Drag the object Country in the Result's Pane
ii) Save and Export the report to the repository.
3. In Designer Change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'ddd'
Note: Uncheck Allow Selection of Multiple Context
ii) Save and Export the Universe
4. Log in to InfoView
i) View the report
ii) Refresh the report
iii) Changes to the object taken place i.e Country is concatenated with ddd
5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'eee'
Note: Check Allow Selection of Multiple Context
ii) Save and Export the Universe
6. Log out from InfoView and login again
i) View the report
ii) Refresh the report
iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
Import efashion Universe
Drag the Outlet_Lookup table into the objects pane on the left hand side
Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019)
Apply the restriction to Administrator
Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
Create a new Deski report
Drag the object state from the Outlet_Lookup table to the Results pane
Observed that the administrator is able to see only Texas which is expected behavior
Save and export the report
Log in to Infoview as Administrator
View the report. Refresh the report
Observed that the administrator is able to see only Texas which is expected behavior
Log in to Infoview as any user say Test User
View the report. Refresh the report
Observed that Test User is able to see all the states which is expected behavior
In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
Save and export the Universe
Log in to Infoview as Test user
View the report
Refresh the Report
TestUser is able to see only Texas which mean that the restriction is applied to Test User also
Cause
This is by Design as the 'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
Resolution
Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Explanation:
If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Explanation:
The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
Explanation:
We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

Regarding Smartform changes not reflecting in e-mail

Hi Experts,
You all know that In solution manager when ever you fill the transaction CRMD_ORDER and click
on some action E-mail will be triggered and this is done through a smart form mail which is assigned to
that particular action.
Now my requirement is to change some text in e-mail to bold.So,i did changes in smartform simply by
making the required text to bold.But the bold changes are not reflecting in e-mail.Still its displaying plain
content.So please suggest me what may be the problem.
The processing class used is :CL_DOC_PROCESSING_CRM_ORDER
and the method is : CRM_SRVORDER_EXEC_SMART_FORM
REGARDS,
PAVAN T.

Try to add some other text to see if the new smart form is used. If not please activate the new smart form and reschedule the action.
Regards

New Changes not reflecting in Quality Box.

Similar Messages

Maybe you are looking for