New Client: What is default login + password?

I have created a new client (800) with transaction SCC4. What login can I use to access this new client?
I've tried sap* with a variety of passwords including "pass", "PASS", "Pass", and several other system specific passwords that we've been using. None of them work. How can I find what login to use to setup the new client entry?

Hello Geisen,
Please check in your profile files if the value of login/no_automatic_user_sapstar is set to 1. If it is 1 login through SAP* isnot possible. Change it to 0 and then try with PASS.
This is ofcourse true if you created the new client not using SAP* but some other user like DDIC. If you SAP* then this parameter is already having value 0 and in that case you can ignore my comments.
Regards.
Ruchit.

Similar Messages

New Client SAP* unable to login with PASS

Hi All,
We have issues logging in to a newly created client. We enter user SAP* with PASS.
These are the steps taken:
1. BD54 - Created Logical system name
2. SCC4 - Created new "test" client
3. Login to new client with SAP* and PASS. Failed
4. Check RZ11. Parameter login/no automatic user sapstar is 0
5. Restart SAP instance. Still cannot login.
6. Tried login to other clients with SAP*. Cannot login.
7. Check DB level, there is no SAP* user in any existing client.
8. Restarting Windows Server. Try again. Failed.
Please do let me know if we miss out any steps.
System info:
HR System (netweaver) / MS SQL 2008 R2/ Windows 2008

Hi,
It is impossible that SAP* does not exist in any client because it is hard-coded in the SAP system and should exist with default password 'pass' even if it is deleted from DB.
Are you trying PASS (as in uppercase) or pass (in lowercase)? It is supposed to be lowercase. Please try this.
Also, which version of SAP Netweaver are you using? For very old versions, the password was some date and not pass.
Regards,
Shitij

Issue with adding a new value to the Default Login Page

Hopefully this is an easy one guys, I've added a select list item to the standard login page (P101) to allow the user to select a DOMAIN as well as entering their username and password.
When the next page is displayed and I try to retrieve the value held in the new field it has been cleared, but the values entered into items
P101_USERNAME and P101_PASSWORD are still present.
I can't figure out why the values held in items P101_USERNAME and P101_PASSWORD are still present but P101_DOMAIN has been cleared.
I've tried creating a value on page zero and writing the domain value to it using pl/sql and javascript but as soon as the next page is requested the value is cleared.
Any Ideas how to get around this????
Thanks in advance

I suppose your login page contains a process like this:
BEGIN
   wwv_flow_custom_auth_std.login (p_uname           => v ('P101_USERNAME'),
                                   p_password        => :p101_password,
                                   p_session_id      => v ('APP_SESSION'),
                                   p_flow_page       => :app_id || ':1'
   :t_random_number := :p101_random_number; /* this is something I added to my code */
END;Now, if you go to this page:
http://apex.oracle.com/pls/otn/f?p=31517:1
please note the random number assigned to you. Once you login, the same number will appear on the page 1 (near to the top).
So, that is how you could solve your problem.
   :t_random_numberis an application item.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Default login password on Storedge 2540 doesn't reply

Dear my colleagues;
I have a new ST 2540 Storedge but I couldn't log in with its default password writing on its documents (kra16wen). Is there another password or should I reset it and how? Can anyone help me about the issue?
Thanks.

Figured out that it was a Displayport driver issue. I ran the Dsiplayport uninstall program, only hickup was at the end it gave me an error trying to restart automatically. Just quit the app and restarted manually and all is well now.

What is default UserID/Password for Oracle 11g

Hello experts,
I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
Enterprise Manager Database Control URL - (orcl) :
https://192.168.2.25:1158/em
when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
Thanks a lot in advance.
Edited by: user10791378 on Aug 16, 2009 1:36 PM

>
I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
Enterprise Manager Database Control URL - (orcl) :
https://192.168.2.25:1158/em
when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
>
You can log in to the Enterprise Manager Database Control with any DBA user. Typically, you should be able to logon as sys or as system. The passwords for these two users where specified by you during the install of the database.
If you can't remember them, you should be able to change them on the command line after a connect as sysdba there.
Kind regards
Uwe
http://uhesse.wordpress.com

SAP* and DDIC passwords for new clients in Sol Man 4.0

Hello all,
I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
I hope some of you can help on this, because I am stucked on it.
Regards,
Luis Alberto Zeró

Hi guys ..
i thing you can check in Document Installation guide Solution manager on Page 108
If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
You can use client 001 for production.
The following procedure describes how to perform a client copy manually. We recommend that you
use client 001 as source client.
Caution
If you want to use a client other than the default of 001 as your production client, you have to reconnect
the Java part to the production client as described in SAP Note 937323.
Procedure
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
 a) Set the profile parameter
 Login/no_automatic_user_sapstar to 0.
 b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy the client with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
 a) Reset login/no_automatic_user_sapstar to 1.
Caution
 You create SAP system user SAP* on the new client
 before resetting
login/no_automatic_user_sapstar.
 b) Restart the application server.
rgds
echo

Error while creating new client

Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babu

Hi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik

How to create new client in SAP IDES

Hi Experts,
          I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
          For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
          Give me some suggestions on this.
Thanks & Regards,
Ravi.

You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra

Keychain Security Password vs. Keychain Login Password

Hi,
Does anyone happen to know anything about the keychain SECURITY password? I know what my keychain LOGIN password is and have been able to change it. I don't remember setting up a keychain security password and I haven't been able to find information on how to change it or access it or even find out more about it.
Thanks,
Securitied Out

However under security, when I go in I can unlock it with my login password which is the same as my keychain login password.
I'm a bit confused. I see no security menu item within Keychain Access. Exactly what are you referencing? Additionally, under the Security prefPane in System Preferences, there are only two items requiring a password under the General tab.
But to access the network access information I have in it it won't allow me in when I use my login password.
Where are you trying to access this information? There's nothing in Keychain Access, that I can see, that deals with network access.
In the listing after date modified under the keychain heading what I see is System not login like Login file above. So I'm trying to find out what that is all about and just have no clue and am a bit frustrated.
Once, again, I have no idea exactly what you're trying to do or where you're doing it. You need to be more explicit and provide the steps and utilities/applications you're using.

Default Wallet Password in 10g R3

Does anyone know what the default wallet password is in 10g R3, I have tried changeit but this doesn't work.
The wallet is located at D:\App\Oracle\as\1013\opmn\conf\ssl.wlt\default

Hi,
Try 'welcome'.
This works for the default wallet in the 9.0.4 release.
HTH,
Jim

Default sap* password for new client copy ?

Hi Basis Expert,
What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
please advise what is the default password for sap*.
i am using Netweaver 7.0 SP16.
Thank you and best regards
Fernand

Hi!
If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

Default password "PASS" for username SAP* not accepted for new client

I have created a new client, client 200 in my SAP system. I assigned it to a logical system properly and exist as one of the clients on the system together with the default clients "000", "001" and "066". The problem is that when i try connecting to this newly created client using the credentials Username: SAP*, Password: pass i get an error as follows:
name or password is incorrect (repeat logon).
I also tried the password that i use to connect to the default clients and i get the same error message. Please assist.

Hi,
Set parameter login/no_automatic_user_sapstar with value 0 in t-code: RZ10 then restart SAP system.
User SAP* may get locked due to incorrect login attempts. So, delete SAP* record from database level.
> sqlplus / as sysdba
SQL> delete from sapsr3.usr02 where bname='SAP*' and mandt='<client number>';
it should show 1 rowe deleted..then
SQL> commit;
Now system will allow you to login with user SAP* and password 'pass'
With Regards,
Renu

N4S Test Drive SAP* Password in New Client

I've just installed the N4S Test Drive, and created a new client to explore in. However, I can't log into that client as SAP* with the same default password used to log into client 001.
I've also tried the original date password, but without success - does anyone know what I should be using?
Many thanks.

Hi,
first create following parameter in instance profile using RZ10,
login/no_automatic_user_sapstar -> 0
save and activate profile.
restart sap server.
now login with SAP* and password
regards,
kaushal

Can't login to new Client 100

Hi,
I have installed SAP Netweaver 7.0 SR1 SP3 ABAP Trial Version on Windows.
I have defined a new Client 100 with transaction SCC4.
I can't login to this new Client, it fails with message "name or password is incorrect". I have tried multiple credentials.
sap*/minisap
sap*/pass
sap*/06071992
None of them work
Please can you help?
Thanks, Olivier

> I can't login to this new Client, it fails with message "name or password is incorrect". I have tried multiple credentials.
> sap*/minisap
> sap*/pass
> sap*/06071992
sap*/pass is the one you need. For this to work you have to set the profile parameter login/no_automatic_user_sapstar to 0 (zero) and restart the instance. This parameter defaults to 1.
see [SAP help|http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm] for more info.

In SQL default login 'sa' can't be used in SQL Authentication...and how to find its password

Hai..while installing SQL Management R2 2008, is it any steps to enable default login 'sa' and to set password for it (login sa)
in SQL Authentication...or Is there is any possible to set password for other user login...which is created newly......
I tried to create new Login with name 'NIT' with 'SQL server Authentication' AND I ALSO ENTERED password...while i tried to connect with NIT,and its password in SQL server authetication...it throw me 18456 error...

>>>>is it any steps to enable default login 'sa' and to set password for it (login sa)
You can specify Mixed (SQL Authentication) and then you would need to provide a password for SA.
Can you post entire message you are getting from?
http://blogs.msdn.com/b/sql_protocols/archive/2006/02/21/536201.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

New Client: What is default login + password?

Similar Messages

Maybe you are looking for