New Microsoft Cluster.

Years ago i did many SAP in the Microsoft Cluster Environment. I have to say that I like it, some problems can occour but the system was reliable.
At this moment we're planning new environments for the HCM servers. The Microsoft Cluster has been choosen as the main HA system. Well, I have read some documentation and many thinks are changed. The first in the new idea of the SPOFs ( single point of failures ) are the only that will be clusterized and the application servers will be installed in the local machines.
I need some clarification. We're not planning to have Application servers. Only one instance will be enough. Can I clusterize the dialog instance to avoid the local installation as I did in the past ? There is something i'm missunderstanding.
Best regards.

Hello,
The multiple SAP installation in the same cluster is fully supported by SAP. You can find the guide:
Installation of Multiple SAP Systems in MSCS. MSSQL Server in:
https://service.sap.com/installnw70
Link:
Installation Guide - SAP NetWeaver 7.0 including EHP 1,
And dowload the guide under Multi-SID Installation on Windows MSCS.
I think that i will test it under lab conditions using vmware trying to understand the process. My main problem is that this are going to be installed by external consultants and I need to know all the process in order to avoid potential problems in the project start.
Best regards.

Similar Messages

Print Screen using new Microsoft Remote Desktop app on Mac

I am trying to figure out how to do a screen capture of a window using the new Microsoft Remote Destkop app on my MacBook Pro. I don't have a numeric keypad so the Ctrl+Alt+Minus on the keypad does not work. On the older remote desktop
client there were preferences to remap this but I cannot figure it out on the new app. And the snipping tool is great if connected to an OS that has it. Otherwise it does not help.
Thanks!
Richard

Hi,
Please check if you have the PrtScn key on your keyboard. If so, you can use this key to capture a full screen screenshot and paste it such as MS paint.
If you do not have the key, you can start the On-Scrren Keyboard to use the PrtScn Key within the remote session.
Control Panel\Ease of Access\Ease of Access Center
Hope this helps.
Jeremy Wu
TechNet Community Support

Is it worth it spending $200 dlls in the new Microsoft Office 2008 for Mac?

I am trying to decide whether to upgrade my Mac to the new Microsoft Office 2008. Is it worth it? What are the differences between the new version and the old one?

There are more differences than would be practical to list here.
http://en.wikipedia.org/wiki/MicrosoftOffice_2008_forMac
might be a good place to start, as well as Microsoft's website for a full description of new features. ArsTechnica also has a review of it on their website somewhere too.
Is there any specific reason for upgrading? If not, then I would recommend sticking with 2004. I went out and got 2008 about a month ago (student licensing, so it only cost me $40) and I'm not at all impressed. It's slower than 2004, even on my quad-core Mac Pro. The overall responsiveness of the application is sluggish, especially in Powerpoint. Dragging textboxes and other elements around the page, for example, is incredibly laggy and feels imprecise. No to mention Microsoft broke Endnote compatibility in Word 2008 as well, so if the Cite While You Write feature is important to you, forget about it. I'm sticking with Office 2004 and iWork for now. I don't feel so bad since I only spent $40 on it; no way would I justify $200 unless I needed 2008 for a specific reason (ie work compatibility, etc)

STMS error message on the Microsoft cluster.

Hi,
I have successfully installed NW2004s on a Microsoft cluster. When I run STMS for the very first time on client 000, I am getting message saying "tp configruation not completely distributed".
Any ideas.
Regards,
N.S

Hi,
I will tell you the exact solution.
Login to your application server using sapgui. run the transaction SE06.
There you get an option perform post installation Actions. Click on it.
Then go to transaction stms and it will say you that you are logged in to your domain controller.
Further go to trnsaction rz10 and import profiles for all the active servers.
reward with good points.

Why there is a difference in a "class" attribute value of html tag when viewed in "Page Source" and using "Inspector", I am refering to new Microsoft site?

While inspecting the new Microsoft site source, I observed that the "class" attribute value of the "html" tag when seen in Page Source the value given by Tools/Web Developer/Inspect tool. Value with the tool indicates class="en-in js no-flexbox canvas no-touch backgroundsize cssanimations csstransforms csstransforms3d csstransitions fontface video audio svg inlinesvg" while that is given in Page Source is class="en-us no-js"
The question is why different values are shown?

Inspector is showing you the source after it's been modified by Javascript and such.
To see the same thing in the source viewer, press '''Ctrl+A''' to select everything on the page, then right-click the selection and choose '''View Selection Source'''.

System Copy on Microsoft Cluster

Hi,
We have ECC 6.0 SR2 with Microsoft Cluster on Oracle 10.2 & Windows
2003 Enterprise edition 64bit.
Installation is ABAP+java stack
Installation of CI and DB on same host.
Virtual hostname for database is ORACLEOT1
Virtual hostname for CI is SAPOT1
We have taken Database Instance Export using sapinst sapint_use_hostname=ORACLEOT1
command and executed from command prompt, Export completed successfully.
Now, we are trying to export the Central Instance using the same command and encountered error will Export ABAP
The step runR3szchk it is showing Error
Error log:
ERROR: ExeModify for write_ddloadd failed in row 42876
       (rc = 26)
       objectname   = /1CN/LRMSCALEV02~0
       objecttype   = PRKEY APPL0
       tabart       = APPL0
       rowcount     = 0
error message returned by DbSl:
(null)
Please also suggest us for CI export, whether we need to give virtual
hostname of virtual hostname of Database or Virtual hostname of CI.
Regards,
$@ndy

Hello,
rc=26 means ' Primary key constraint violated '.Please check the
object    /1CN/LRMSCALEV02~0 according to the
note 130648 R3load export: Write_ddloadd failed (rc=101)
Also update the kernel and dbsl files from marketplace and try export again
note 19466
regards,
John Feely

How can i convert New Microsoft Office Word Document to adobe

how can i convert New Microsoft Office Word Document to adobe

Hi itchigo,
You can use Microsoft Word's inbuilt feature of converting the doc to pdf by simply selecting Save As> 'pdf doc format' from the drop down.
Please refer: http://office.microsoft.com/en-001/word-help/save-as-pdf-HA010354239.aspx#BM11
Adobe Reader does not have the capability of converting docs to pdf or vice versa. It can only be used to read pdf files.
Regards,
Rave

Experiencing very small text using adobe connect on my new Microsoft Surface 3. Any solutions?

Experiencing very small text using adobe connect on my new Microsoft Surface 3. Any solutions?

I've heard of this happening before, "it seems that you may be having problems with display scaling of Microsoft Surface. Display scaling effects the way content and controls appear on the screen.
Have you tried messing with scaling at all?
You can try this options: Upgrade Surface Pro from Windows 8 to Windos 8.1, disable display scalling, or reduce display scaling for windows.
Here is some info I found: http://www.microsoft.com/surface/en-us/support/apps-and-windows-store/app-display-issues

Problem e-mailing reports after migrating to new Microsoft Exchange server

Hi,
I am now unable to e-mail (SMTP) reports to anyone in my company because we just migrated to a new Microsoft Exchange server. Anyone know how to get rid of this message?
Status: Failed
Printer: The instance is not printed.
External Destination: Mail the instance to "____________" with a subject of " %SI_NAME% %SI_STARTTIME% ".
Data Refresh Settings: Use the server defaults.
Start Time: 8/4/09 1:00:18 PM
End Time: 8/4/09 1:01:07 PM
Server Used: gmmc-crs.reportjobserver
Error Message: server error. SMTP_E_TCPSOCKET_OPEN(2): CrystalEnterprise.Smtp
We tried changing the gmmc-crs.reportjobserver with no luck.
Thanks,

Hi,
You need to start with your exchange logs and possibly enable tracing on your BO webi/crystal/destination job servers (depending on the type of report and whether or not it is scheduled) to get an idea of how far down the line the SMTP connection is getting.
You could also confirm a few key things:
Have the SMTP destinations on your BO servers been updated with the new SMTP server info
Can you telnet to the mail server on port 25 from the BO server - if not, then check the firewall between the two servers and change the existing ruleset to allow connectivity to the new server
Possibly the old mail server didn't require authentication and the new server does, you could test this through telnet?

I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word. I am a computer nitwit and am hoping for some simple sol'n.

I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word. I am a computer nitwit and am hoping for some simple solution.

Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages.
If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
Quit the application.
You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3. Move the file to your desktop.
Open the application and test. If it works okay, delete the file from the desktop.
If the application is the same, return thefile to where you got it from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

Has anyone used Lookout 5.0 in a Microsoft Cluster?

I am trying to load Lookout 5.0 to a Microsoft Cluster. I have been succesful with the server side - cluster failover of the application and data retrieval from live and historical data. I can not get historical data from the client side.

NI does not support the use of Lookout 5.0 in Microsoft Cluster.
Joji

Urgent - SAP_ Microsoft Cluster error

Dear Friends,
We Installing our Production servers by using Microsoft cluster service. Our SID is P00
Servers name was SAPP and SAPDB
Today morning we try to start the instance in MMC it could not start. then we see the cluster service status by using Cluster manager we noticed the following errors
SAP P00_00 Service failed
SAP P00_00 Instance Offline
We checked the SAPoscol service it is running. Then we checked the Event viewer same error is repeated in event viewer.
We need your help to sort out this problem
thanks in advance
G.G.Karthickbabu

Dear Bernd,
Thanks for your quick response
All other instance are in online except
SAP P00_00 Service failed -(Generic Service)
SAP P00_00 Instance Offline -(SAP Resource)
in groups under cluster manger window
by
G.G.Karthickbabu

Oracle On Microsoft Cluster

Hi all,
I am in a testing enviornment.I had Microsoft 2 node cluster set up where the failover is happing.
I installed database software on 2 nodes and from one node i configured database where my datafiles are in storage.
I copied tnsnames,listener.ora from primary node to the second node.
On primary node my database is running fine,but when the failover happens and wheni log to my database its showing TNS error.
Please help..
Regards
Bobs

Hi Bobs;
What is DB version? What is OS version?
Please see below which could be helpful for your issue:How to Set Up a Two Node Cluster for Content Server on Microsoft Windows [ID 758916.1]
Microsoft Cluster Server and Oracle Fail Safe Quick Start Guide [ID 187410.1]
RAC on Windows 2008: Oracle Grid Infrastructure / Clusterware Currently Incompatible with Microsoft Failover Cluster (MSFC) [ID 1157711.1]
Database Administration in an Oracle Fail Safe/Microsoft Cluster Server Environment [ID 221202.1]
Regard
Helios

Microsoft cluster

Dear All
can any 1 help me regarding the microsoft cluster
the case is that we have a delay for about 12 minutes from the moment nodeA foll down till the moment node B takes the resources
can any 1 help
thanx
Amr Osama

Hi AMR,
Try this Link.
[http://www.msexchange.org/tutorials/Implementing-Two-Node-Cluster-Windows-2003-Enterprise.html]
Thanks & Regards,
Sudheer....

Microsoft Cluster Server

Does anyone have experience setting up Forté in a Microsoft Cluster
Server (Wolfpack) environment?
If so, DOES IT WORK and what kind of things do I have to be aware of?
Thanks in advance for any information that may be provided on this
topic.
Tory Konitzer
Manager, Technical Services
Metrix, Inc. * 20975 Swenson Drive * Waukesha, Wisconsin 53186-4064
Phone: 414.798.8560 x1126 * FAX: 414.798.8573 * Email: [email protected]
http://www.metrix.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Contact the sales team. It may not be available in download section. For
documentation edocs section have a link for MSCS.
_shailesh
Yuva Raju wrote:
I am interested to setup clustering for tuxedo system. Please inform, from where
i will get BEA tuxedo Extension software.If you knows the link, send the link.
I looked into bea.com download page, i did not get about that software.
Thanks and Regards,
Yuva Raju

New Microsoft Cluster.

Similar Messages

Maybe you are looking for