New Moment type and Assignment to Order Type

Dear Experts
I want to create a new moment type with same functions as 261 and i want to assign this moment type to new order type PPIR(For Semi Finish Orders), Because our raw material can be directly issued to finish orders as well as semi finish order.I want to distinct the issuance of both types.So please guide how to create new moment type and its assignment to Production orders
Regards
Raj

Dear Raj
What u are asking to change movement type at the time of Production GR.. please refer to tcode OPKA.. there are two packages CO (for production orders GR) and IW01(for Process orders GR) that associates movement types at the time of production. However i had same kinda a scenario in the past but this is not recommended by experts to change movement type at the time of GR. You should find some other way out...
Regards
Navaid

Similar Messages

Assign sales order type to Sales Area

Hello everybody,
I am trying to assign a sales order type to my sales area, and i have an error : the system tells me that my sales area is not defined. What can i do?
I already defined my sales area, and i can see it in IMG->Entreprise Structure->Assignment->Sales and Distribution->Set up Sales Area.
whwn i try to assign my sales order type to the predifined Sales Area it works. what am I supposed to do to be able to assign a document type to my sales area.
Thank you in advance,
Silvia

1. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
2. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Check the above configuration. It should resolve the error once it is maintained appropriately.
Regards,
Rajesh Banka
Reward points if helpful.

Person type and assignment type

i wanted to create a new Person type and assignment status type using API for a particular business group.
But i did not find any API for the same. Please suggest me how will it be done through backend.

There are no APIs for these but there are FNDLOADs that you can use to download and upload between environments.
This post of mine gives you all the details: Re: API for person type and assignment status creation

Person type and assignment status for terminated employee

Hi,
When I terminate an employee, is it possible to default the field "type" on "Person type and assignment status for terminated employee" section into another value? Its default values is: "Ex-Employee released".
Thank you.

Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

Suggestion for Pricing Type and Pricing Exchange Rate Type

Dear All,
Good Day,
what would be your recommendation to maintain Pricing type and Pricing exchange rate type for below process.
1. Invocie.
2. Cancellation of Invoice.
3. Return Invoice.
4. Credit Note.
5. litigious Invoice.
Best Regards,
KSK

Thanks sam,
I have configured the same but now problem is Billing Header Exchange rate is not changing. Because of that Accounting document also doesn't have new exchange rate,.
1. Is there any another config needs to be maintain.
Example:
Sale order Exchange rate              10.45           Order date : 01.11.2008
Billing Header Exchange Rate         10.45           Billing date : 05.11.2008
Billing Line item Exchange Rate      11.00           Billing date : 05.11.2008 base on VTFL Config
Account Document Exchange Rate 10.45          Posting date : 05.11.2008 because of Billing Header exchange Rate
I need Accounting document also to carry New exchange rate 11.00 . suggest me.
Best Regards,
KSK

Set up/maintain order type dependent parameters for order type PI01

hello all,
i would like to know how to set up/maintain order type dependent parameters for order type PI01 for a particular plant.
thanks,
maxx

Hi Maxx
Order types are maintained in T Code OPJH
Thereafter go to T Code OPL8 to maintain there dependent parameters and assign it to desired plant
Hope this helps
Rgds

Create Specific Invoice Document Type against Specific Sales Order Type

Hi,
the sales order types are
1) "ZORR" (copy of "OR")
2) "ZORS" (Copy of "OR")
both have different number ranges
the delivery Type is "LF"
invoice document type is
1) ZINR (Copy of F1)
2) ZINS (Copy of F1)
boht have different number ranges
now i want that when sales order "ZORR" is used, then invoice type ZINR should be created (when creating invoice w.r.t LF)
and when sales order "ZORS" is used, then invoice type "ZINS" shoudl be created.
right now, the system creates invoice "F2" whenever i create invoice w.r.t. to delivery order in VF01
dear experts...please sort this issue..thanks

Assign Billing type in VOV8 .
ZORR" (copy of "OR") == LF== ZINR
ZORS" (copy of "OR") == LF== ZINS
So that when you create invoice with VF01 system will trigger invoice type ZINR for ZORR, and ZINS for order type ZORS.
Regards,
Ramesh

The JNI defines a mapping of Java types and native (C/C++) types.

As per the tutorial
The JNI defines a mapping of Java types and native (C/C++) types.Does the above sentence mean that I can use dll written in C/C++ only and not dll written in Pearl.
Could anyone please give me the solution.

Please do tell me how can I call a dll file created in Perl ....And I will point out again that I doubt that it is possible to create a dll that has the following characteristics
1. Is in fact a dll.
2. Is in fact intended to run anywhere outside of the perl engine.
Step 2 means that you run perl, not a "perl dll" via C.
You can do that or at least in the past you could. And that has nothing to do with java nor JNI. So you would learn about it on a perl site.
And I can only note that when I did that a number of years ago it was very difficult. Certainly much harder than getting JNI to work. And you had better have quite a bit of C/C++ experience before you attempt it.

First derived wage type and second derived wage type

Hi all,
Can any of u elaborate in detail what is the use of first derived wage type and second derived wage type in v_512w_b.
Regards,
Prasad

Hi,
This table allows you to make calculation for current wage type and generate 2 more.
This is hypothetical example: according to the law for overtime during weekend employee is entitled for hourly compensation for every hour worked, extra pay of 50% for overtime, and extra pay of 20% for work during weekend. All these payments should be reflected on payslip.
Then you set WT: 1001 - Hourly rate, 1002 - Overtime, 1003 - Work in WE.
After that you specify generation rule for WT 1003 that it must be generated for every overtime hour worked in WE.
In table V_512W_B you set valaution bases:
Current WT
Valuation basis - 01, statement WT - 1003, % rate - 20%
1st derived WT
Valuation basis - 01, statement WT - 1001, % rate - 100%
2nd derived WT
Valuation basis - 01, statement WT - 1002, % rate - 50%
For example, employee worked 5 hours overtime during WE, and hourly rate is 10 USD, then he will get in his payslip:
WT 1001 - 5 hours 50 USD
WT 1002 - 5 hours 25 USD
WT 1003 - 5 hours 10 USD.
Wage types 1001 and 1002 were derived from WT 1003.
Cheers

Settlement Strategy Sequence assignment to Order type

Customized settlement strategy sequence are created in KSR2_ORC
and assigned to internal order types in KSR3_ORC
It is not allowing to assign to plant maintenance order types.
Anyway it is possible to assign to PM01 order types ?
Thanks

hi
check this path in spro
Internal Orders --> Actual Postings -->Settlement --> Automatic Generation of Settlement Rules --> Assign Strategy Sequence To Order Type

How to create screen sequence and assign to material type

Hi,
How to create new screen sequecnce and how to assign it to material type, is there any link of Industry sector with this.
regards,
zafar

how to assign it to material type and also what is use of industry sector
Industry sector - it simply mean The industry sector groups companies according to activity, for example, plant engineering and construction, mechanical engineering, the chemical industry, and the pharmaceutical industry
Field references are defined in Customizing for the Material Master in the activity Maintain Field Selection for Data Screens.
for see field references run tcode OMs9.
Assign Field references to Material Type by Tcode OmT3E, You can see in OMS2 in General data See Field references and SRef: material type

How do we assign the Order Type PD(Planning & development) to a planttt

Hi,
I am creating a new plant. My ref. plant has order type PD(Planning & development).
Order category - personnel order.
How do we assign it to our plant. In Tcode KOAI. it s not showing only the order type PD for my plant. Can anyone help.

Hi ,
Can u Tell me how can we assign it , in case if i am not copying the existing plant.
It is not populating in OKZ3 for my new plant.
Edited by: Dhilipan Nair on Apr 19, 2011 10:32 AM

Error in requirement class while assigning service order type.

Hello All,
I am getting below error message whenever I am trying to assign a service order type to requirement class.
This the error meassage:
Maintenance order type ZSC3 is either not flagged as a service order type or revenue posting is allowed for this order type.
System Response
The system does not allow any further processing.
Procedure
Enter a service order type that does not allow revenue postings.
Please help urgently.
Best regards,
Partha Das

Ya do same thing but I dont think using this FM will solve the problem...
You get the Update Terminated message when the normal course of the program has been halted by user intervention.
Now could u please check that are u calling any FM in your program.
If yes just list out all of them.
Thanks.

Output type and application for order cancellation

What is the output type and application for the cancellation of a sales order

Hi,
Try This
cancellation of sales order:
go to va02 enter the sales order and click enter
then sales document->delete
Reward if usefull

Difference Between RE and RM sales order type

Hello friends...
Can anyone tell me what is the difference between the sales cycles if i take sales order RE and RM type.
RE- Return Sales Order
RM- Delivery Order return
Difference between them is not clear...it will be good..if explain with some example.
Thanx
siddharth

Hi
Returns for Delivery Orders
You can create a return for delivery order items.
When processing returns for delivery orders, note that:
u2022     The standard system contains the sales document type RM for delivery order returns. You create a return for delivery orders in the same way as a standard return.
u2022     Choose Goods issue to post goods receipt.
u2022     Cumulative quantities are not updated automatically. You must correct them manually.
[Delivery Order Process |http://help.sap.com/erp2005_ehp_04/helpdata/EN/bd/18510a98a911d194fc00a0c9306667/frameset.htm]

New Moment type and Assignment to Order Type

Similar Messages

Maybe you are looking for