New Sharp CD-DK890N - no power

Just got a new (last night) CD-DK890N, plugged it in, played it last night for about 30 min., played it for about 10 minutes this morning, unplugged it and plugged it into another outlet (yes, working outlet), and now it will not turn on. I know it is getting power, as it initializes the CD Disc changer, but there is never a display of any sort after that and never anything else. I have attempted the reset and anything else Sharp has suggested. Need to know what to do next. THX.

...not sure I understand your problem...
...are you trying to reinstall Windows?..you're setting CD-ROM as first device but no disk is detected so it's booting from the HDD...maybe you should check the connections on the CD-ROM and that it is jumpered correctly...look in BIOS to see if it is detected at all...
...the USB keyboard works for configuring BIOS but not when you get to Windows?..that may be because Windows was installed on another machine and drivers are borked...use a PS/2 keyboard and mouse or put PS/2 adapters on the USB input devices...
...please create a signature with all your hardware listed by clicking the Profile button at the top of this page while you are logged in...

Similar Messages

HT1752 i tried updating my iphone 4S to new IOS software on a power book G4 and now it says it cannot restore it, i will loose all my data and media files. What can I do?

i tried updating my iphone to new IOS software on a power book G4 and now it says it cannot restore it, i will loose all my data and media files. What can I do?

You cannot sync an iPhone to an old obsolete PPC G4.

After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

Silly rabbit wrote:
Ah, you didn't read the fine print on installing Lion, did you? None of your old software will run in Lion.
You have two choices:
A) Buy all new or updated software
B) Partition the hard drive and install an older version of OSX to run your older apps.
You did not give us any idea of what PowerPC apps you were running, so additional options:
C) Restore to Snow Leopard
D) Install Snow Leopard (and Rosetta which runs PowerPC apps) in Parallels 7 in Lion:
Installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Problems with new Mac Book Pro 13'' +power adaptor

Hi there,
I'm new here and first of all I'd like to appologize from my lack of technical language, since my only interesst in computers is that they don't give me problems so I can keep not knowing too much about them.
Ok, so I bought the new Mac Book Pro 13'' exactly 2 months ago cause my old and long travelled Power Book G4 died. I didn't hesitate to spend the money to buy the new one, cause I was so happy with my experience with the old one and in my mind returning to PCs was not even considered.
BUT...I'm not totally happy about my new laptop...from day 1 Safari would just close itself but I didn't give too much thought about it. After this, not only Safari can close up to several times a day, but also iphoto or any other program that I use for work. But that's not all..One day it would take minutes to start running and it would go extremely slow...another day it would start also very slow but also it wouldn't show the tools bar on top or my folders. Another time it would show me, instead of the normal starting page, a page where it would ask me to accept or not a kind of revision for hardware. After so many problems of course I pressed yes...everything seemed normal, then computer started and seemed to be running normal again (aside from this safari and other programs that shut down). Today my computer, when moved, just went totally blank but fortunately I could start it with nor problems after it.
So...anyone knows what the problem must be?? Should I take it to a Technical service ??? and there's another issue...i'm handing in m phD in a week so I can't just be without computer now, and in a week I'm flying to Canada where I also will need my computer for work...what can I do???
And the second problem...the power adaptor from the beginning seemed to act funny sometimes...sometimes charching, sometimes not, I would follow the instructions in the support part and after being several minutes changing one cord for the other, to keep it 1 minute disconnected and so at some point it would start functioning again. But this happened seldom so also I would think it was a protectiion mechanism of the adapter. But, when this is happening more often than not, then it gets annoying. Also I've been transporting it in a careful way since I bought it to find that after only 2 months in the cord (from the computer to adaptor) you can see the internal cable as if there was some cut...a third one seems to be appearing too. I've taken it to the technical support and the guy who was helfpul but also honest said he couldn't do anything for me cause since there were those cuts, he could always be said that it was a misuse of it-an accident and then he would have to pay the replace himself. Well, it's not!!! My old adaptor has been transported in a way less careful way and it's survived with NO problems for 5 years. The material is clearly different from the old cord. This one because it's new, I only need to put it in a special bag air protected. Honestly I don't feel happy to pay 80 € for an adaptor that I don't know if it's gonna last me only 2 months or that I know I can't transport normally. The guy suggested me to ask in forums and to call directly to the apple technical service.
Again, has anyone had any similar problems with the adaptor???
Rosanna

Take it to an Apple retailer and have the computer repaired. It is still in warranty.

New Macbook 3 pronged ac power cord

I just had my ac adaptor replaced under warranty. They sent me a 3 pronged power cord. Is this correct and they are just using a grounded cable now?

As far as I know, Apple includes 3-prong extension cables as well as the standard two-prong snap-in module in the box with all their new laptops. I got a 3-prong cable with my circa 2005 iBook G4 1.42, and I believe the ground pin connects to the metal "button" on the power supply.
Back in 2002, my iBook G3 600 shipped with a 2-prong extension cable. The "button" that the module snapped into was plastic.

New 30-inch screen wont power up!

Just received my new 30inch screen to go with my new mac-pro. Plugged everything in as it said, mac-pro worked fine. The screen however never came on. Tried changing plug sockets tried unplugging and re plugging in, tried reconnecting the adapter at back of the screen and still nothing.
So tried plugging in my old sony lcd for my pc and that works, so not sure why the apple display didnt work. Anyone had problems with the power block? Not sure what to do now!

Why not contact Apple? If you just bought it and it's "DOA" they will replace it.

New Time Capsule unable to power

One day after setting up my new Time Capsule yesterday, it would lose power, until unplugged then plugged back in. Now it no longer powers up at all. Clearly it needs to be returned, but since I had completed my first backup, I'd rather not have my information on it anymore. Is there a good/easy way to get the data off the drive?

None.. Apple have never yet failed to clear off customers data.. so their record is excellent.. (If you store the launch codes to the ICBM silo in your backyard then maybe you should ask Apple to hand you the drive..)
You could be the first to have your info posted. It is one good reason for using encrypted backups.
Apple sell the unit as sealed.. unlike most real NAS on the market this is not accessible to the public to fix, replace or repair the hard disk. I would not be worried though.

New iMac is buzzing with power on or shut off

I purchased my new iMac on 4/26 and turned it on everything was great. Let it go into sleep mode overnight and the next evening it was buzzing quite loudly, interfereing. I tried shutting it down, still buzzing, power source removed no muzzing any more. I know electronics have buzzing sounds but after having the computer shut off for 24 hours the buzzing went away, only to come back after the computer had been on for 30 minutes. Is it possible this is just a defective machine? If i exchange it will it happen again? could the electricity in my home caused the buzzing?

No iMac should produce a buzzing sound.
Yes, it's possible there's a defect.
You have a one year limited warranty.
Check your warranty status here >
Apple - Support - Check Your Service and Support Coverage
Standard return policy:
You have 14 calendar days to return an item from the date you received it.
From here > Apple Help - Returns and Refund
You need to take the iMac in for service. Locations listed here.

New PB 17in DDR2 - Remaining Power Fluctuates Wildly

Got one of the new Powerbooks - so far rather satisfied - but one thing I am noticing is that the "remaining battery power" (displayed in hours/minutes) is fluctuating really wildly.
With a full charge I'm seeing 6:27 remaining (wow I never even got over 2hr with my 1st gen Aluminum G4 15in) but then every once in awhile I look and it says 4 hours-something, or 3-hours-something, then one time I looked and it said I had over 9 hours remaining! This is all in the same hour of use. Crazy huh?
I haven't benchmarked it but I'm guessing I'm getting about 3-4 hours out of this battery (and I haven't changed any of my Energy settings since I bought this thing, so it's at the defaults.)
Anyway, I'm curious if anyone else is seeing this type if issue. Seems like in the past Apple has in many instances put out patches for "battery remaining" problems. So maybe this is yet another one of those.

Seems like it doesn't fluctuate as much now, sticks within the 3-4 hour range, which personally after having the 1st gen Aluminum PB, i'm pretty happy with (I only got like an hour out of my first PB). Maybe something in the hardware has to warm up once it's fresh out of the box - this really only happened the first day ...

My brand new Macbook pro can't power my USB Mbox 2 pro . Why not?

Can ANYONE help me because it seems like both APPLE and AVID can't. I just got a new macbook pro last month Aug/2011 just for audio and production. I installed protools 7.3 and when plugging my Mbox in the power lights on it are very dim and Protools says Unable to locate digidesign hardware. Can anyone tell me why this is happening and better yet how I can fix it? I tried diiferent USB cables, different USB ports, I tried connecting through an AC powered USB hub, I also have a crap PC on which the same software was installed and it works fine on that. Right now my mac OS is Lion 10.7.1.

Yeah, I just posted about the exact same issue. I have an Imac and another Macbook Pro and it works fine, just not on the mew Macbook Pro. I'm baffled, but intend to go to the Apple store to check this out. If I get anywhere, I will report back.

Why does battery percentage decrease even when new iphone5 is plugged into power?

My new iphone5 seems to lose charge on occasions whilst I am using it and it is connected to power ?

Something is running that is consuming power faster than the charger can replace it.

New DTR-T2100/G4 Box Power Supply

Bought one of these new boxes as they are amazing and extremely fast, got it off eBay as it was supposedly new (looks used to me) and wanted to send it back but could very well be stuck with it and I didn't realise it was missing the power supply so if I am stuck with it I atleast want to be able to use it
Could someone help me find a replacement power supply?
BT please help, I dont mind paying...

liamstears wrote:
Bought one of these new boxes as they are amazing and extremely fast, got it off eBay as it was supposedly new (looks used to me) and wanted to send it back but could very well be stuck with it and I didn't realise it was missing the power supply so if I am stuck with it I atleast want to be able to use it
Could someone help me find a replacement power supply?
BT please help, I dont mind paying...
Was it advertised as new, was it advertised as complete. If it was and it is not complete or is used then complain to the seller and if no satisfaction file a dispute witrh Ebay or paypal.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

"New Apple keyboard" will not power devices even on powered hub?

I'm assuming the decision to power a device through the USB port is software-based since my "new keyboard" refuses to power any high-drain device despite being plugged into a powered USB hub. Has anyone else experienced this? Is this something that I can hope Apple will eventually address or is it the (only) downside to buying this sweet keyboard?

A powered device only supplies high power the devices directly attached to the USB hub. The keyboard will only pass what is is spec'd to pass which by definition is a low amount of power.
Well, looks like that's not entirely true since Apple says:
"Devices that draw high power from the USB connection, such as iPods, hard drives
and some flash drives, can only be used with the new keyboard when it is attached
to the aluminum iMac."
This suggests that the keyboard can, in fact, pass the power to the device when hooked up to the new iMacs and that the limitation is somehow software (or firmware) based and not a function of the USB architecture.
So, I guess in a way I have my answer: Apple has somehow limited the new keyboard when it's not used with an iMac. That, or it's an issue of which they were originally unaware and one that they may someday "fix".

Brand New Iphone 5 will not power on

Activating my new phone and it will not power on. called the service provider for customer support and they said to charge for a few hours. I can not see where on the phone it indicates its charging as there seems to be nothing lit up. I have never had an Iphone so i'm pretty lost here. My Droid Bionic has a flashing indicator so even when totally dead it will flash when plugged in. Any help would be great!

Plug the phone back into the wall charger wait 5 minutes and then hit the sleep button on top of the iphone. IF that doesn't power it up then hold down the sleep/home button together until you see the apple logo and then release, then wait for the phone to boot back up.
Where exactly did you buy this iphone 5 from?

My new Qosmio X500 has a power on problem

My laptop Qosmio X500 has a problem. When i want to power on nothing happens and I should remove the battery and replace it till my laptop begins to work.
BIOS of my laptop is the new one so, i don't need to update it.
The battery is full charged too.
Can someone tell me what should I do?
I bought it only for 1 week.
It seems i should send it back.
Please someone gives me advice

I am having this problem for the past couple of days were my system locks up and freezes.
I have to removeed power cable and battery to restart, its a Qosmio X500-134 and it randomly just happens but round the same time each time 19.00 but some times at different times jsut depends how long i have been on the computer for.
Its a registry, driver or definetly hardware problem that is causing it i have narrowed it down to.
I have the latest drivers and bios so theres an issue somewere :(
I'm dissapointed due to the laptop not being very old only a few weeks.
Message was edited by: andyhunter
Message was edited by: andyhunter

New Sharp CD-DK890N - no power

Similar Messages

Maybe you are looking for