Newbie in need assistance configuring iChat server (LDAP).

I needs some assistance in setting up iChat server for our office. I running LDAP and I have the iChat server basics setup and it is working, however my boss wants to set up different domains in iChat for the various departments (i. e. Accounting, Sales, production, etc.). These will not be accessed outside of the building. He states I need to configure additional search bases. It is at this point I am drawing a blank.

Hi Paul,
An intersetng one.
James Weston may be able to post more on this.
iChat can Chat to other Macs using the Bonjour option
(Click the Apple/Command key + 2 together)
Bonjour has to be enabled in the Account section of iChat Preferences.
All computers have to be in the same subnet
This is going to be the sticking point.
Lets say you have one routing device for your local net and it issues all computers and devices with IP Addresses in the range 192.168.1.xxx then all the computers on on the same Subnet as there is only one LAN.
If you have subsequent routers that change the IP addresses to somethng like 192.168.1.xxx for sales and 192.168.2.xxx fo accounts etc, then you will have subnets. Computers in 192.168.1.xxx will only see other Bonjour/iChat computers in that group and the same for 192.168.2.xxx but not from group to group.
To show up in the Bonjour window iChat takes the Address Book Me card entry of the MAc user account and broadcasts it to the other computers.
This would give you an option of using this method to pass out information where people were. The revelant "Sales" or "Accuounts" could be added to their Real Names.
(Bonjour would have problems if several computers were changed to read just Sales as the Address Book name).
An alternative would be to set up a VPN and have all computers on the same network for Bonjour independent of any of network they were on.
James knows more about networks than I do and may have other information that may help.
Ralph

Similar Messages

Why an separate App Domain is needed to configure App Server in SharePoint2013

Why an separate App Domain is needed to configure App Service Application in SP2013

https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/configure-an-environment-for-apps-for-sharepoint-2013.aspx
SharePoint 2013 Apps have their own, isolated URLs, which are separate from the URLs of the sites where the app is being deployed to and where the app is being used. In order to provide isolation apps should run in their own domain, instead of in the same
domain name as your farm. Using a different domain name for apps helps prevent cross-site scripting between apps and SharePoint sites.
Microsoft recommends that the new domain name should NOT be a subdomain of the domain that hosts the SharePoint Sites. For example, if the SharePoint sites are at matrinescu.com, consider mcatrinescuApps.com instead of app.mcatrinescu.com as the domain name.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=8&cad=rja&uact=8&ved=0CFcQtwIwBw&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DP1eEBQ0vG3o&ei=_teWU-OeDo-JuASBlYII&usg=AFQjCNErUUIrVTd-hnF-7H0wXINYzW3SBA&bvm=bv.68445247,d.c2E

Clueless NEWBIE DEVELOPER, NEEDS ASSIST with Insert Record Server Behavior

Experienced DW designer learning CFMX7. I cannot seem to get
beyond this error message when using the Insert Record server
behavior to write data from a form into the database. Using MS
Access 2002, CFMX7's internal server, DW 6.0. Please note that I am
learning development for the first time and am using tutorials. I
was able to connect at one point but now I cannot.
See error message below:
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
Syntax error in INSERT INTO statement.
Resources:
Enable Robust Exception Information to provide greater detail
about the source of errors. In the Administrator, click Debugging
& Logging > Debugging Settings, and select the Robust
Exception Information option.
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://localhost:8500/moosek/TMPu724j3nl2j.cfm
Date/Time 07-Aug-06 07:23 PM
Text
Text

MongoSlade,
I had this exact same problem with a CFMX 7 datasource that
was set up as Microsoft Access with Unicode. It turns out that
"Password" is a reserved word in the Unicode driver. Or somewhere.
I got around it by putting square brackets, i.e., [ ] around the
column name, like this:
update MyTable
set [Password] = '#form.Password#'
where UserID = '#form.UserID#'
That solved the problem nicely. I hope this solution will
work for you as well.

Need hardware configuration for server

Hi All,
Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
Thanks,
ATRSAMS

Hi Atrsams,
According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
Regards,
Charlie Liao
TechNet Community Support

ACE 4710 - need help configuring backend server monitoring

Currently running an ACE 4710, which is handling all of our inbound SSL connections and then forwarding requests thru
to backend web servers. This all works fine.
My question is this..Right now we are not load balancing any of the backen web servers. But I now have a requirement that should
a web server crash or become unavailable I need to redirect that backend connection to another web server.
Scenario is more like I have 2 web servers both serving same content, but I want one server to take all the connections unless it fails, at that point
have all the connections forwarded to 2nd server.
Is there a way to setup the load balancing where the 1st server gets all the connections until a failure happens ?
Any help would be appreciated.
Cheers
Dave

Hi Dave,
You can use sorry-server or backup server feature. details can be found at
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/rsfarms.html#wp1000264

Newbie DBA, needs assistance

I am trying to log on to sqlplus of ebusiness through putty and i am not getting an headway, basically i surely don't know my way rounfd the files system yet. But this is what i have done
[olu@nith ~]$ cd /
[olu@nith /]$ ls
BACS dev foglight initrd misc oraapp root stage var
bin etc home lib mnt oradata RPMS tmp
boot f.big_chunk images lost+found opt proc sbin usr
[olu@nith /]$ cd oraapp
[olu@nith /oraapp]$ ls
BACKUPS DEV nohup.out Patches PROD TEST
[olu@nith /oraapp]$ cd DEV
[olu@nith DEV]$ ls
devappl devcomn devora nohup.out patches
[olu@nith DEV]$ cd devappl
[olu@nith devappl]$ ls
but when i run the variable, i am denied permission, i want if i am doing the right thing, if no what do I need to do please, and at what stage do i change to $APPL_TOP
[olu@nith devappl]$ . APPSDEV_nith.env
/bin/.: Permission denied.

You are using putty so you will go locally inside the server..it is different.
How did you originally log in ?
Did you go root/<rootpassword>.?
If yes, go to the devappl directory and do $ls -l AS I TOLD YOU ABOVE
so you will know the owner of the files then
$su - <name of oracle files owner>
*it will be shown as the first column after the permissions.
Post the result please.
Firas

ATA 186 needs assistance configuring to work with SIP

Hello. Just got ATA 186. I would like to use it as SIP FXS. I already have FXO with the POTS plugged in. I don't want o use the gateway or the gatekeeper. I would like to configure it to be IP dialing. II am running SIP image ATA030201SIP050616A.zup. Any help is greatly appreciated.
George

Hello, already replied in another thread, please do not open duplicates.

Do I have to configure DNS server before configuring VPN server?

Hi,
In my journey to get this mac os X server to actually work...
Do I need to configure DNS server on Mac OS X server first before setting up VPN or ICHAT server?
Or, it seems that I can use my D-Link Gaming router as a DNS server.
I think I'm most confused with which numbers to enter as my DNS... is it the local IP of my mac mini being used as the server (192.168.0.1) or is it the IP address assigned to my cabel modem?
There are so many posts on this, I am feeling lost.... has anyone found a really great step by step that explains how to do this?
thanks
Ethan-

Ethan,
My experience is that it is absolutely necessary to have an external DNS server setup correctly BEFORE you even start installing your OS X Server, so why not keep it. Still, once you have set up OS X Server, you can also use its own DNS server, but be VERY careful to set it up correctly. DNS mistakes, especially the ones regarding server's own IP addresses, are usually not forgiven by OS X Server. Many of us here have learned that the hard way. As for me, I prefer to have a dedicated DNS.
Best regards,
Andrus

How to configure mail server for subscription

Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
Ray

Hi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray

How to configure Content server with Oracle Portal

I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2

Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath

Configuration assistant "Oracle Notification Server Configuration Assistan

Facing below issue on setup of RAC in vmware
Note: Do not run the scripts simultaneously on the listed nodes.
INFO: Starting to execute configuration assistants
INFO: Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons add_config rac1.localhost:6200 rac2.localhost:6200
Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons has failed
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
any workaround pls
Regards,
Amin Anwar
Edited by: A. Anwar on Oct 17, 2012 2:24 AM

Hi,
best would be to take the actual version of Oracle (11gR2), which fixes a lot of bugs (also in installation), than to analyze problems based on old versions.
Even if you need older databases (10.2, which I don't hope since support is ending soon), you should at least think about taking the newest version for Oracle Clusterware (Grid infrastructure), .
Regards
Sebastian

IDS 5.x: Is a separate configuration directory server instance even needed?

Because iDS 5.x supports multiple database instances, why is there a need to suggest installing the directory server with a separate configuration directory server instance (on say port 390)?
In large multi-tiered iDS 4.x directory server implementations, using a single master configuration directory server is very cumbersome, so many implementations are using a local configuration directory server instance, on port 390 with the data instance on the usual port 389.
With the iDS 5.x release, we will be implementing local directory server instances, all on port 389, on all of our tiered LDAP servers. There will be no separate configuration directory server instance, as it is not needed.
At this point, I am questioning the "best practices" suggested by the SunOne documentation to use a separate configuration directory server instance. It does not need to be on a separate port now with iDS 5.x supporting multiple databases.
And I note that the present "/usr/sbin/directoryserver setup" script will not allow for a directory instance to be installed on port 390.
Adam

Yes, with iDS 5.X, it's much safer to have the o=NetscapeRoot tree served by the same instance as your corp/user tree. The separation approach was created to avoid the pitfalls when importing LDIF, but the -n argument to ldif2db lets you avoid such problems.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

InDesign Newbie in need of assistance

Hi,
I hope I am in the right place.
I need to produce a book, and am looking for a bit of guidance.
The templates have been created in Photoshop. I will also need to include photos and text and am wondering I am better of (for quality purposes) adding the text and photo's in InDesign or Photoshop.
Thanks
B

ALWAYS include your version of InDesign and your OS in your post. We cannot help you if we don’t know what tools you have available. ALWAYS include some hint of your problem in your subject line. “InDesign Newbie in need of assistance” tells us nothing, since this forum is for InDesign users (noobs and otherwise) in need of assistance.
Use InDesign. If your book has more than one page, has any text in it, has anything bleeding (printing to the edge of the page), or will be printed professionally, then InDesign wins over Photoshop in a first round knock out.
Import the photos without text, then add the text in InDesign. You can place the photos with the text so you can see how to format and position the text in InDesign, then hide the text layers in the Photoshop file by right-clicking on the image in InDesign and selecting Object Layer Options.

Do we need to configure webgate & HTTP server two times

Hi Experts,
Our requirement is need to integrate EBS and OBIEE with OAM 11g for SSO.
For integrating EBS, oracle recommanding HTTP server, webgate and accessgate.
At the same time do we need to configure separate webgate and HTTP for OBIEE also otherwise we can use common webgate & HTTP server for both EBS and OBIEE.
Can anyone please advise me.
Thanks in advance,
903079.

Hi Hussein,
Thanks for reply,
EBS release : 12.1.3
OBIEE : 11.1.1.5
OS : RHEL 5.3 x86_64
I am following the MOS doc. 1309013.1
Regards,

Newbie in need assistance configuring iChat server (LDAP).

Similar Messages

Maybe you are looking for