Newly installed Brother 7820N will not print

We just bought a new Brother 7820N and connected by USB, following installation instructions precisely. Upgraded driver at Brother site. The system recognizes the printer but when we try to print, the queue shows the job as "stopped." Error message appears after attempt to resume printing. Error message reads: "client-error-not-possible." We got this same error with our old printer when we upgraded to Leopard.
Any suggestions?
Thanks.

Not sure if I have the solution to your problem here, but I'll share my experience.
I recently hooked up a Brother 5250dn, and went to update the drivers on their site and it specifically said not to upgrade if running leopard. With this in mind I looked up your model to see if it was the same and the only downloads I saw were for the Scanner Driver and the Remote Setup Software. So I'm thinking it may be possible that you only have the Scanner Driver installed, which would be a reason it doesn't print. To solve this run your Leopard install disk and select optional installs, then find the printer drivers and make sure that Brother is selected.
Hope this helps.

Similar Messages

  • Newly installed Elements 11 will not open without restarting the PC each time.

    Using Windows 7 I uninstalled Elements8 and installed new Elements 11 but if I close down Elements 11 it will not reopen unless I restart the PC each time. Also I cannot uninstall E11 because I get  message that "thumbdatabase.db3" is in use, so I cannot reinstall to see if that will solve the proble. Please help?

    Working with your Operating System’s Tools
    You simply need to find out which process is keeping those files open/ blocked. In fact it's quite likely that your PSE never quits correctly due to some issue on your system and that keeps those files in use...
    Mylenium

  • Newly installed OS X will not start up on new hard drive

    Hello helpers,
    I have many problems with my Power book g4 titanium. Most critical: I have just replaced my Hard drive with a new 120 gb. I also, purchased a new dvd OS X 10.4 full retail version. I installed it onto the new hard drive. It loaded properly and said to restart. Well thats it. It will not restart. It acts like it is going to restart. But, all I get is the apple with a little wheel timer thing. I waited for several hours and that is all it does. Please help.
    Many grateful thanks,
    Rembrandt0328

    I suggest you re-prep your new drive then reinstall OS X.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and select the Apple Partition Map scheme, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    When formatting has completed and the new volume has re-mounted on the Desktop quit DU and return to the installer. Proceed to install OS X.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Newly installed Logic Express will not open

    I bought a 15-inch MacBook Pro and Logic Express 9 today. I was able to install Logic smoothly, but when I looked for it in my Applications folder, it appeared as a crossed-out AppleWorks icon. When I try to open it, I get the following error message:
    "You can't open the application Logic Express because it is damaged or incomplete."
    I installed it again and I got the same error message. Do I need to get it replaced, or is there a step in the process that I missed?

    I didn't register, I don't have my wireless internet set up for the Mac yet.
    And I don't have Snow Leopard, I just have regular Mac OS X. Do I need Snow Leopard to run LE9?

  • HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

    I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer.  I have installed the software and my computer is picking up the printer but it will not print.  I have restarted the computer and it still will not print.

    Hello jamesettafromfl,
    If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Add or remove a printer
    OS X Yosemite: Printing troubleshooting
    Sincerely,
    - Brenden

  • OFFICEJET 4622 WILL NOT PRINT WIRELESSLY AFTER MULTIPLE TIME TRING TO INSTALL mutiple times

    My printer will not print wirelessly. I see that it is installed and the firewalls are turned off but it will not print

    Hello phdavid53,
    Welcome to the HP Forums!
    I understand your Officejet 4622 will not print wireless. I will do my best to assist you! First, I would like to ask you a couple of questions to clarify: When you installed this printer on your computer, were you able to print a document? Did the installation state it had a successful wireless connection? 
    I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
    What is your operating system on your computer? Windows or Mac?
    If you were never able to install this printer over a wireless connection through the software, then please follow this HP document on 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati.... I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    A few suggestions for you:
    Try:
    uninstall all HP utilities or other HP apps on your Mac
    see if there is updated software on the HP website
    go to System Preferences > Printers & Scanners > Print
    control-click on your printer in the column on the left
    select "Reset Printing System..." and "reset" in the dialog that follows
    Do a factory reset on your printer
    go back to printers & scanners and it should see your printer and download a driver for it from Apple

  • My HP Pro 8500 will not print in blue. All new cartridges installed.

    My HP Pro 8500 will not print the a blue color, it comes out pint where it should be blue.  Installed all new cartridges and still does the same thing.

    Hi Calabasas,
    Welcome to the HP Forums!
    I understand that your printer is experiencing a defect in the print quality, and I would be happy to assist you!
    Please follow this document on Troubleshooting Print Quality Issues. If you have completed all of the steps in troubleshooting and the blue still comes out as pink, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

    HP Officejet Pro 8500   Cyan ink will not print. installed a new one, but no success

    I had to replace both printheads about $85 a piece.  It may be more cost effective to buy a new printer.  Once I replaced the one printhead, the other one went out.  It is common and it did solve the issue.  I really like my printer and if it gets me another year or so, I think it was worth it.

  • Will not print black ink after installing new HP cartridge

    HP Officejet 4620, Windows 7....installed new HP black ink cartridge and now it will not print black at all. I followed all online tips in the help section, even cleaned the vents on the cartridge itself but only prints blank page. No error messages are shown. Diagnostics ran and says all is working correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working just fine before inserting new black cartridge.
    This question was solved.
    View Solution.

    I just spent  1 1/2 hours on the phone with HP Tech Support but it was worth it.  They are sending a replacement printer no charge to me (expect I chose to pay extra for next day shipping).  Even though my printer is out of warranty!!!  I normally buy HP products anyway but will definintely stay with this brand based on their excellent customer service and support.  Thank you once again for your initial help online and for directing me on the right path!!!

  • Since installing firefox my emails from yahoo will not print anymore. No error message just nothing

    Since installed Firefox my emails from my yahoo will not print. There is not error message, nothing waiting to print. When I go to my AT&T emails they will still print. I will need to uninstall Firefox if you can't help me. Thanks. Pat

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

    Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

    The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
    To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
    If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

  • I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

    I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

    When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
    http://kb.mozillazine.org/Problems_printing_web_pages

  • My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

    my eprinter will not print in proper in  colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
    This question was solved.
    View Solution.

    Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
    Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Installed OS X Yosemite, and Illustrator CC 2014 will not print

    Just Installed OS X Yosemite, Mac Powerbook. and now Illustrator CC 2014 will not print to my HP Laser jet Pro 400, But Acrobat, Photoshop do. Any advise, I even Uninstallled and reinstalled the HP Drivers.

    Did you also uninstall, run the cleaner tool and reinstall all your Adobe apps. In recent versions of the Mac software (10.7 and up) migration will not work reliably with the Adobe Suite.

Maybe you are looking for