[nForce] msi k7n2delta ilsr hdd led not work

hi guys, well there is not much to say only that my hdd led not work, rarely i put attention on it, but just when i see... is gone... sniiiff.. i tryed change the led, invert cables, and the raid controller has nothing to do with this issue, sometime ago i have power issues, and during those times the led suddenly "wake up" , then i change the psu, and hdd, now i have sata hdd, and somebody told me the led not work with the 3· ide or sata, culd be the data cable
thanks

"...yes yes i know that, right now using sata i know the hdd led not work, but when i-m using ide drive either, thas wy i saying may be the ide cable.thanks..." That's not what you said in your first post. IF IDE HDD works (even if HDD led doesn't work) then IDE cable should be OK. Perhaps HDD light case/mobo connection has a problem.

Similar Messages

MSI X58 Pro: HDD LED does not work for S-ATA drive

Hi,
I've got a problem with my brand new MSI X58 Pro: I've got an S-ATA HDD (Samsung 640GB) and an S-ATA DVD drive (Pioneer) installed in a Compucase 6X Miditower. There is NO(!) IDE drive. I don't get the HDD LED to work! I've tried everything including a BIOS update to 7.1 - the LED stays out.
I found some reports in the internet from people having a similar problem: no HDD LED for S-ATA drive activity.
Is there anybody else having this problem? Isn't that possible in general? Is that a problem of the board? The HDD drive?
Greetings,
Michael

You are talking about the status LED on your case, right?
- Is it properly connected to the right pins on the correct header?
- Double-check for +/- pins and make sure the plug is not connected the wrong way.
- Make sure, the LED is not defective.
- Make sure the cables are not defective.
- Make sure there is no problem with the pin-plug to the board.

Hp pavilion 15 e025sl mute led not working with latest audio driver (rollback solve)

Hi,
i'm here for a segnalation, i have this hp and after update audio driver (suggested by hp update software) mute led stop working, the button work and mute the audio but led not work (f6 button led).
Affected driver problem is "realtek high definition audio" version 6.0.1.7010, i opened hp recovery manager and restored driver 6.0.1.6856 after this, the led is back and working fine.
Please, fix that problmem in the next update, for the moment i ignore request update for audio driver from hp support assistant.
Thanks

thank you for your response, I made this topic so that it may be useful to other users with the same problem, now I will contact the support hp.

Dv6 power led not working

Hi everybody!
Today, I changed the fan in my Pavilion dv6-6001eh (the original stop working). After I assembly, the power led not working anymore. I check the cable, but that's ok. Otherwise the power button working. The second power led in the right side next to USB, also not working.
Why? Maybe pressed hotkey?
Thank you.

Any advice?

Why light led not work???

Hey, wondering why the light led not working on Htc one m7??? i tried everything like reset factory etc.. STILL SAME.. Ugh.... Anyone know how to force it to work????

ajnevares3
THANK YOU FOR TRYING HELP ME WITH UR INFORMATION.... I WENT AHEAD DO WHAT YOU EXPLAINED..
IT WORKED ON MY HTC ONE M7!!!!!!!!!! THE LIGHT LED IS WORKING NOW.. BECAUSE OF YOU, YOU RE BEST!!!!
THANK YOU SO MUCH!!!!

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

MSI GF4 Ti 4200 Td not worked!!

Hallo
I have new computer
P4 2GHz, 2 x 512 DDR (266MHz), 80 GB HDD, GF4 Ti4200 128 mB DDR (MSI), MSI 845e Max2 BLR (mth..).
Win 98 and Win Me not worked!!! Why?????
Win XP and Win2000 running ok.

I dont know exactly what is your problem?
But if other OS is OK, this pretty much a driver issue.

K7N2 Delta-ILSR HDD LED wont turn off

It looks as tho I am the only one having this problem so far. I just installed my MOBO and the HDD LED shows no activity and will not shut off. All I get is a solid light. Anyone got any ideas?

Quote
Originally posted by Wonkanoby
try reversing the 2 wires as far as plus and minus go
any drive on raid and you will see no activity
If you know about LEDs you'll know they only work one way. Reversing the polarity will cause it to not work at all and yes just for fun I have tried it. Also I have nothing connected to the raid yet.

Caps lock/scroll lock/num lock/ LEDs not working - instead pop-ups in bottom RH corner of screen

Specific details; p/n: GS066PA#ABG, 4 GBytes DDR2 RAM, OS Windows 7 (6.1) Ultimate Edition 64-bit Service Pack 1 (Build 7601) DirectX 11.0. LED's were working but during one of the windows automatic updates they stopped working. I don't know which update. Now I get little pop-ups "CAPS LOCK: ON" etc (black text on white background). If I rename bttray.exe to bttray1.exe and restart the laptop, that kills the pop-ups in the bottom RH corner of the screen but it does not restore the operation of my blue indicator LED's. Can anyone help please?

Hi @haggis1 ,
I saw your post regarding the problems with the pop-ups and LED lights not working after a Windows Update. Most likely there was a problem with the update when it was installed. This Microsoft Support link will show you how to uninstall an update. Try uninstalling the most recent updates and the restart the notebook and see if the LEDs start working again.
If that fixes the issue then there is another section in that link entitled: I remove an update but it gets automatically installed. That will show you how to hide an update.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Msi enjoy71 tablet's camera not working

Hi ..can anyone please help me with my tablet's camera..I just got this tablet a couple of weeks ago,and the camera isn't working it keeps saying can't connect to camera or gallery has stopped ..first I installed another camera program from the play store it worked with the front camera but didn't work with the camera facing me..then I installed permission manager but it was useless.. at last I reset the tablet to factory reset.. and when I opened it the front camera worked but when I tried opening the camera facing me it stopped and said the gallery has stopped..and both cameras didn't work since then..one thing I have to mention ..that is a couple of days ago I inserted an old memory card I had in my old Mobile.. but discovered that some programs got effected and stopped working and I had to reinstall them again.. so I removed it..and that was before resetting the tablet...I hope you can help as I can't register in the official website for MSI..its not working... thanks alot

OK- ran hardware test as per manual. Nothing untoward found. So it MUST be a software issue, right?
This is the same MacBook Pro as the other one. Only THIS one was asked to use Firewire to transfer data from the one it replaces instead of me first registering it.
Anyone have this?
Camera kind of works (flashes into dark sepia but quickly fades to either complete black or some white spots from lights) and green light IS on when it should be.

Msi Gf3 & Asus P4B533-e not works

Before I upgraded to this combination I had asus Tusl2-c.Everything works fine.Then I tried to upgrade to P4.When I tried to install Msi 30.00 drivers they tell me no generic.tv_ file, and after every restart Win Xp told me there is video adapter problem.Then I go back to Asus Tusl 2-c and everything work fine as before.
I can not belive that Asus P4b533-E and MSi Gf3 ti 200 not works together?

Atx case 300W Sky hawk , sqare connector +12V plugged into Mb. When I tryied to install vga card there reported me " cannot install generic.tv_ to destination directory".So I skipped that file, but after restart "problem with video adapter". Asus probe reported me:
+12v= 12.12
+5V = 5.10v
vcore= 1.525v

Apple numeric keypad keyboard caps LED not working...

Hi,
I am using numeric keypad(wired one) with my iMac, suddenly, when i switched on the machine in evening and tried tap the CAPS key and it doesn't light up but the caps lock is working perfectly fine.
I saw many posts regarding this on Apple discussions, but, none of them has worked for me.
Sometimes, i use this keyboard with Windows 7 also it is not working for that too. I tried with many other PCs including Windows or Mac but, didn't worked.
I discovered that Apple is providing protection against accidently CAPS lock with new manufactured keyboards, i bought my iMac 15 days back.
My entire work in on Mac and on the application i used to work on, i need to enter the password at almost 4 locations and with out knowing that CAPS lock is on or off, really taking a lot of time.
Can any body suggest that the problem is with the LED Bulb or what? or this a manufacturing fault? or i need to go for a new keyboard?
Your comments are really appreciated in this regard.
Regards,
MacLover

Hi, my first suspect would be a bad Keyboard.
Open System Preferences>Keyboard>Modifier keys, is Caps Lock set to No Action?
Open Keyboard Veiwer in Sys Prefs>International or Languages, do the letters switch to upper case when Caps Lock is pressed?

Satellite L750/05q - Wireless LED not working

Have an L750/05q running Win 7 64bit.
Wireless works fine but the Wifi led not lighting up when wireless activated, only the bluetooth indicator led comes on when Bluetooth on, Wifi on or both on.
Updated from toshiba site to latest Toshiba listed Atherios driver - 9.2.0.316 (my model is not listed on their AU support site), but still no led. Wireless works fine.
Also updated the LAN driver (Realtek) too,
Am wondering if this is just a failure in hardware rather than the driver.
Any ideas? Thanks.

Thanks Akuma and MisterX. On reading your replies I went back and read the manual more 'carefully'; I had interpreted wireless WAN as internet but it most likely refers to a GPS card function which is not installed in this model. Thanks for taking the time to reply and put my mind at ease.
Cheers :)

HD led not working on K7N2-L ?

Just got this board a week ago.
instaloled evrything fine and installed xp with probs but one thing i noticed was the hd led would only light up when i first turn the comp on and also when readying from a cdrom but will not work when its only reading from the hd i have tried turning the connector round and putting it on that way but then it does not work al together is there a way to get it to work when it should ( when the hd is reading or writing).
Or is there another conector that u can connect it to that i don't know about ?
Thanks
Steve :]

yep shure does if i put a cd in it lights up when registering ti and also when transfering files but wont light up when copying files from hd to hd or when windows is loading only time it lights up aoart from the cdrom thing is when i first boot the computer.
seems weared to me, also while i'm typeoing this and when i'm doing anything apart from installing or copying files from a cdrom the hd light flashes once ever second.
anyone got any ideas apart from the hd led being possesed:D lol
Thanks
Steve

Rtl8187se (MSI Wind) netcfg wpa_suplicat (eduroam) not working

Hello boys and girls,
I try to connect to wifi on school with my MSI Wind.
I try to connect with this driver http://aur.archlinux.org/packages.php?ID=20673
and then with ndiswrapper this windows drivers http://driverscollection.com/?H=RTL8187SE&By=RealTek (ndiswrapper not working "scan nothing")
and i have this error
sudo netcfg eduroam
:: eduroam up - wpa_supplicant did not start, possible configuration [FAIL]
my /etc/wpa_suplicant.conf (its configuration from wicd "working" http://wicd.net/punbb/viewtopic.php?id=275 )
network={
ssid="eduroam"
scan_ssid=1
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="pass"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
my /etc/network.d/eduroam
CONNECTION="wireless"
INTERFACE=wlan0
SCAN="no"
SECURITY="wpa-config"
ESSID="eduroam"
IP="dhcp"
TIMEOUT=10
DHCP_TIMEOUT=20
WPA_CONF="/etc/wpa_supplicant.conf"
I don't know where is mistake.
Last edited by zajca (2008-11-26 10:36:31)

I try manual wpa_suplicant (same configuration)
and this is issue
[zajca@netbook ~]$ sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
Line 565: unknown EAP method 'SIM'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 565: failed to parse eap 'SIM'.
Line 568: failed to parse network block.
Line 575: unknown EAP method 'PSK'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 575: failed to parse eap 'PSK'.
Line 579: failed to parse network block.
Line 611: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 611: failed to parse eap 'FAST'.
Line 617: failed to parse network block.
Line 622: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 622: failed to parse eap 'FAST'.
Line 628: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.

[nForce] msi k7n2delta ilsr hdd led not work

Similar Messages

Maybe you are looking for