Nike + has begun drastically miscalculating pace part way into run

I have used my new Nike+ and new nano for approximately 3 weeks. I loved it the first few weeks, and was very motivated. Recently it has begun miscalculating pace partway into run...my first mile might be 7:40 (typical) and suddenly even though I haven't slowed down, I'm going 24 minutes per mile or worse, zero! I don't know how to fix this. Any help much appreciated!

Similar Messages

I trans apps from my itouch to my iphone but part-way into it I stopped it to go to bed. Now I can't continue on with the process. What to do now????

I trans apps from my itouch to my iphone but part-way into it I stopped it to go to bed. Now I can't continue on with the process. What to do now?? ty

oops... rookie =\

Begin audio part way into presentation

I want to begin music in a presentation about half-way through rather than at the beginning. Is that possible?

Greetings and welcome to the Forum:
This topic has been addressed in numerous previous threads in the Forum. Try searching on the keywords music, hyperlink, soundtrack, etc.
Briefly, if you want to begin a music track that will carry through several slides, it must be created as a Soundtrack for a presentation that encompasses those slides. If these slides are a subset of a larger presentation, then you need to create separate sub-presentations, each containing the particular group of slides. Each then can have its own soundtrack. Finally, you will have to link the presentations together via Hyperlinks.
If you want a music track to play through only one slide, that is easy: Just drag the file icon for the music track into the slide; select it and the assign it to Start Audio in the Build-In menu. Be aware, however, that the track will stop playing as soon as you progress to the next slide.
So, a quick answer to your question is "maybe" but it depends on how you want to structure your presentation.
Good luck.

TS1362 downloaded song stops playing part way into song

A song I downloaded stops playing about 80 seconds into the song - what can i do to fix this?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Best way to run open source/GNU programs on Mac

Hi folks,
I'm kind of new to Macs, coming from the linux/unix world. I'm working on reinstalling the OS on my macbook (after finding out the hard way that it itsn't prudent to use a case-sensitive file system on a Mac), and thought this would be a good time to ask if anyone has an opinion on the best way to run linux-y programs on a Mac. For instance, I find myself wanting to use "zim" and keep it synchronized with my linux computers, but I can't get it to install on my mac. I can see a few options:
1) run linux in a virtual machine, but this is a problem since I only have 4 GB of memory.
2) use mac ports, but most of the ports I tried in the past didn't work, and my questions to the community were ignored (I tried to be friendly, but perhaps I came across wrong...?)
3) use fink, but I gather it is out of date and not really used any more.
So, I'm curious what other people use if they want to use open source programs? Ideally I wouldn't have to compile each program myself, but maybe that is the best option?
Thanks.

I think Fink has install binaries (and if it has a ZIM port that works for you, what do you care if Fink is a bit out-of-date as a package manager?).
From my observations of MacPorts.com, it compiles the ported package on your system (so you need to have XCode (free from Mac App Store) installed on your system. If MacPorts has a binary option, I have not dug deep enough to find it (as I mostly use the minimum to get something I want installed).
The other option is to download the Open Source package and build it yourself. There are some that think this is the ONLY way to go about it (me I'm lazy and only do that for Vim which I desire specific options not always included in canned Vim packages).
If you want OpenZIM on your Mac and you only use it once in a while, then a virtual machine might be the way to go. However, if your use of OpenZIM is extensive, then a virtual machine can be a bit heavy weight, adn for that you might want to either find a working port or build it yourself.
Whatever you do, DO NOT replace a standard Mac OS X installed Unix side program with your own. Put your stuff in /usr/local/bin, or a personal local tree (Fink uses /sw/... and MacPorts uses /opt/local/...), then modify PATH in your shell initialization file. Replacing standard Mac OS X Unix programs may break Mac OS X maintenance scripts, GUI programs that get an assist from a Unix command, etc...
NOTE: Chances are you Mac can go up to at least 8GB of RAM, and if you look at Crucial.com you might find it will not cost you much at all (for example, the MacBook Pro I just got was upgraded from 4GB to 8GB for only $43). With 8GB of RAM you will not notice that you have a virtual machine locking down 2GB. Also I'm not telling you to spend money, just pointing out possible options should you find your need for OpenZIM demands the use of a virtual machine.
With respect to a case sensitive file syste, if you need one, then create a partition (or perhaps a disk image (.dmg) via Applications -> Utilities -> Disk Utility) for that purpose (an external disk is also an option). But as you have discovered Mac OS X and many of its GUI applications have assumptions based on a case-insensitive file system.

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process??

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process?? What is the best/fastest way to give my client a teaser clip??

Still a 20 step process, many ways to approch it. Duplicate project and selectively delete everything around it. Or select and copy what you need. I think it could be a year before apple makes that step a 2 or 3 step process.

Restored today, but then downloaded and installed ios 7. on install restore point doesn't exist and only half a restore part way through ios 7, which has lost most stuff. previous restore points dont seem to exist either only back in April

I have restored earlier today and got a time confirmation afterwards.
Have just installed IOS 7 to find that the restore point doesn't now exist according to itunes.
The phone has made its own restore point part way through IOS 7 installation but half the stuff is missing.
Help !!!
I had loads of very important stuff on the phone. But the only restore points now available are back in April

I also have found out that having updated itunes that this has reverted to a previous setting of syncing my music!!
What on eart is going on Apple ???
This is really poor and not the firtst time these things have happened. Billions of dollars and poor quality !!!

HT204370 I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

Hi brett242424,
Welcome to the Support Communities!
The movie would be in your iTunes library, in the Movies application. However, if the rental period has expired, you may need to contact the iTunes Store Support about your situation:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

How do I continue a migration from iPhoto to Photos that was interrupted part way through?

I began a VERY large migration (40k+ photos) from iPhoto (v9.6.1) to Photos on an external hard drive. I have a MacBook Pro with Yosemite 10.10.3 that is connected to a network that has a Synology network drive. The iPhoto library is on that drive and I was wanting to create the Photos library also on the drive.
The process was very slow and has taken days, but that is expected and it was definitely making progress (I could see the files being added over time). Unfortunately, the transfer was interrupted part way through (my kid closed my laptop, which disconnected it from the network). I tried to start it over with the partially created Photos library folder as the destination, hoping that it would pick up where it left off. It worked until it reached the same files that were previously created. The migration stopped at that point, and the following error appeared: "Photos was unable to make a copy of your library before preparing it. There were file system or hardware issues…” I assume the inability to overwrite previous files with the same names was the case of the "file system or hardware issues."
Is there any way to either continue the migration from where I left off, or maybe even manually move the rest of the files over? Or do I have to wipe out the entire partially migrated Photos library and start over?

You probably will have to start over
And I suspect that you are incorrect - as far as I know NO NAS is formatted Mac OS extended - A NAS is basically a Linux computer with no display or keyboard that uses a Linux format drive - a headless computer
Unless you have a directly connected drive correctly formatted you are cgoing to continue to have issues - your photos and your choice what risk you put them at but you are treading in very dangerous water with you set up - is it documented not to work and similar set ups have been reported here hundreds of times as causing major problems and losing lots of stuff
LN

Officejet Pro 8600 Plus N911g - scanning stalls part way through

I have a HP Officejet Pro 8600 Plus N911g. When I try to scan a large number of documents from the printer to my computer, the printer stalls part way through. Today I had a stack of 45 pages that needed to be scanned. I loaded them into the document feeder on the top of the printer, hit "Scan", "To Computer", chose my computer from the list, "Save as pdf" and start scan.
The printer started scanning, got through about 30 pages and then just froze up. The display screen showed "Now Scanning". I let it sit for over a half an hour, but it did not resume. The only way to get out of the stalled scanning was to turn off the printer and restart it.
This has happened multiple times. Is there a limit on the number of documents that can be scanned at a time?

Hello aksnell,
Welcome to the HP Support Forums!
In my experience the Officejet Pro 8600 Plus would be best suited to scan such a large amount using the software provided. The printer has a internal memory of 128 MB, that will fill up very fast when scanning into the computer.
I would recommend opening HP Scan on the computer, select .PDF and scan the pages this way. It will still feed from the Automatic Document Feeder and also save all pages to a single file when done.
If you need a hand scanning using the software, replay back with the Operating System installed on your computer, Windows or Mac.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Embeded Flash files stop loading part way through after update to 10.2

Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.

Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
Let me know,
Thanks,
eidnolb

My L7680 intermitently prints gibberish part way through pdf documents.

My printer has recently strated to intermitently print gibberish part way through a pdf document. It happens most often if the document is long, eg more than ~5 pages or if I send several pdf documnets to the print queue. If I resubmit the document for printing, often it comes out OK or it goes wrong later in the document.
I'm running Windows XP and I access the printer through a BT HomeHub wireless. I've tried reinstalling the drivers, resetting the HomeHub and running the HP Diagnostic software with no joy (the latter found no problems). The problem does not seem to occur when printing Word documents.
I hope someone can help.

There have been reports of Vista not working well with older networking equipment. Here's a link to a Microsoft note on this subject.
I also have a couple of other questions:
When the printer stalls, can you ping the printer from the PC? Can you access the printer's internal web page by browsing its IP address?
How is the PC connected to your network (wired or wireless)?
Are there other wireless devices on the network besides your PC and your printer?
When the printer stalls, can you still browse the internet from your PC?
Regards / Jim B
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Recovery mode crashed part way through

I installed an update on my iphone 5 this morning, and then it showed me the screen with the itunes app and the plug in cord. I plug it into my desktop and it goes into recovery mode but crashed part way through. HELP!

Hi JILLYPAW,
I apologize, I'm a bit unclear on where you currently stand with your issue. If, after the crash during the recovery mode restore, your iPhone is now no longer responding or starting up, then you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If it is responding but you are unable to update or it has gone back into Recovery mode, then this article may be more useful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
And if you are able to start the restore but it gives you an error message partway through, then you should take a look at this article:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

Nike + has begun drastically miscalculating pace part way into run

Similar Messages

Maybe you are looking for