No business system in integration directory error...urgent pl

Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
Thanks.

Hi,
make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
Did this fix the problem?
Regards,
Hans Christian

Similar Messages

  • Importing new business systems into Integration Directory PI 7.1

    Team SDN,
    Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version).  There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
    Please share with members if wht are the new changes in PI 7.1 work proceses  like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
    Thanks SDN.

    Hi Madhu,
    If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
    refer below link..
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Raj

  • Business Service (vs) Business System in Integration Directory.

    Hi to all,
    I want to know the best practice for using Business Service and Business System, Then
    When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
    Thanks,
    Vikram.C.

    Hi Vikram,
    >>Business System: It represent a specific application System in the SLD.
    Business Service: It represents an abstract service and are used in Cross    Company Process.
    >>When we should go for Business Service instead of Business System in Integration directory?
    Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
    regards

  • Not able to import business system in Integration Directory

    Dear all,
    Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
    Now in the post instalaltion activites.
    I have changed the exchange profile parameter
    SLD connection.
    And other post installation activites succesfully.
    But I am not able to import the business system in Integration director. It throws an error by mentioning.
    *Access to object list of type business system using the internalEOA service business system accessor failed *
    Here we are maintaing a central SLD and hence i created the service users with specific roles.
    SLDcheck is working fine and it dispalying the businees system as well.
    I confirmed that the user and password are same in XI and SLD system,
    But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
    Is this the problem or am i missing out somewhere?
    FYI: The users are not locked.
    Kindly suggest me and it will be greatful if i get immediate reply.
    Thanks and regards
    Vijay kumar G

    Hi Vijay,
    It looks like the problem is with the SLD.
    Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
    Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
    Regards,
    Lim...

  • Error while assigning Business Systems in Integration Directory

    Hi,
    I'm getting an error when trying to assign the business systems in the integration directory.
    The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
    I've cleared the SLD_cache and checked it but the same error.
    The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
    what might be the error.

    Hey
    just want to make sure,are u using communication channel with party or without party.
    also make sure that user has sufficient authorizations
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
    Thanx
    Ahmad
    Message was edited by:
            Ahmad

  • Cannot see business system in integration directory.

    Hi all,
    I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
    I have configured the scenario as given in the exercise scenario in the integration repository.
    In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
    p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
    Thanks,
    Joe.

    Looks like the much abused points system is having a bad day on SDN
    I am glad actually - will keep the spammers away
    A Thank You is all that drives and should drive SDN
    Regards
    Bhavesh

  • Assign Business System in Integration Directory

    Hi all,
    i have basic question.
    in my ID, there are some configuration scenarios.
    for example, the left side look like,
    in case,one of Business System created on SLD was assigned to one of configuration scenarios,
    i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
    can i assign BS1 to several configuration  scenarios?
    or should i create Main scenario in order to define communication channel?
    thanks in advance
    venjamin

    Hi venjamin
    Yes, you can assign the same business system to different configuration scenarios.
    to do this there are 2 ways.
    1. Open the cofiguration scenario to which the business system has already been  assigned.
    Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
    assign your business system.
    2. Select the objects tab>service without party> business system> your business system> right click-->
    assign to scenario and then select your scenario.
    Hope this helps,
    Regards,
    bhavesh
    Message was edited by: Bhavesh Kantilal

  • How to add buisness system in Integration directory -objects

    Hi All,
    I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
    so in the integration directory,
    objects--->service without party >buisness system>
    in the buisness system , whatever buisness system i created the  is not found.
    how to add buisness system into integration directory -- objects.
    Regards,
    vinoth.

    Hi,
    go to integration directory,
    objects--->service without party >buisness system>
    select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
    If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
      and do the same process again..
    Regards,
    Venu.

  • Idoc adapter -  No service for a system in Integration directory

    Hi,
    I'm trying to send a custom IDOC from an R3 system to an XI instance.
    All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
    SM58 in the sender system reports the error:
    "No service for system SAPXXX, client nnn in Integration Directory".
    Do I have to create the service? How?
    Thanks for any suggestion.
    Simona

    Hi Simona,
    you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
    In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
    Regards, Udo

  • No service for system in Integration Directory

    Hi,
    i already checked SDN and OSS Note 940313.
    We want to send IDoc from System to XI. Therefore sender gets "No service for system SAPPSI, client 010 in Integration Directory"
    Thats because IDoc-Adapteris not able to identify SAPPSI.
    Well this Port does exist in IDX1.
    In Integration Directory the Adapter-specifc identifier shows "PSI" and client "010".
    So everything seems to work fine! Even the RFC-Destination has no errors!
    The IDoc contains "SAPPSI" and the client "010" in the right fields, but we have no idea what causes the problem!
    Does somebody can provide me with ideas on how to solve this issue?!
    br

    Hi to all.
    Because i already did everything you mentioned i am kind of desperate.
    Question concerning Sender-Information in IDoc-header.
    There is send <SNDPOR>SAPPSI</SNDPOR>.
    This port reference the one in IDX1?!
    I am asking because we have a testsystem also sending IDoc's where everything works out. System is called ASI so the port is SAPASI. As i mentioned, this works!!!
    In ID the Business Systems are called ASICLNT010 and PSICLNT010. The adapter specific Identifiers are saying:
    For PSI
    R/3 System ID: PSI
    Client: 010
    For ASI
    R/3 System ID: ASI
    Client: 010
    So what the hell is the problem?!
    br - thx to all!

  • Creating business services in integration directory

    Hi
      When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
    Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
    Could anybody out there - clarify these thoughts about business service entries
    Thanks in advance - for your time .

    Hi Karthik,
         Check out these help file links, hope this will help you:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
    Regards,
    Subhasha ranjan

  • Business System as Integration Server

    When do we use the business system as the integration server and when do we use it as a plain rcv SAP system?...
    Also how can we connect business system of dev quality and prod?

    Hi Ravindra,
        Actually, it makes more sense if you rephrase your question as:
    "When do we wnat to use a Integration server as a Business system"..
    We will use the Integration Server as the Business System when you are using the file system of the integration server as the file receiving system or, when you want to implement an ABAP proxy on the ABAP stack of the Integration Server, instead of using any other R/3 system.
    Regarding your second question, there is a concept called Transport Groups in SLD.
    Read this
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards,
    Ravi Kanth Talagana

  • Integration Directory error

    Hi,
    this morning I try to start our Integration Directory but we can see an error message into web browser: The requested client is unknown!
    I restart our NW04s istance and now Integration Directory works.

    Hi
    The following should solve your problem:
    - You can use transaction SMICM:
    In the menu go to "Administration"
    Restart the Java stack of XI... (J2EE Instance)
    - Delete all the temporary internet files and try again...
    This should work.
    Regards
      Sumit Jain

  • System Log Printer Directory Error

    I'm attempting to resolve some error messages in my system log.
    Here's one concerning my epson printer. I reinstalled the driver.
    What is causing the error? I did trace the folders to /Library/Printers/EPSON/InkjetPrinter.
    I can't locate a EPW/IJEPWAgent.app directory. So, is the error being cause because it can't find this 'missing' directory?
    Feb 27 12:00:47 eden-maxwells-imac-3 com.apple.launchd.peruser.501[98] (com.epson.epw.agent): Bug: launchdcorelogic.c:4598 (24498):2
    Feb 27 12:00:47 eden-maxwells-imac-3 com.apple.launchd.peruser.501[98] (com.epson.epw.agent): Path monitoring failed on "/Library/Printers/EPSON/InkjetPrinter/EPW/IJEPWAgent.app": No such file or directory
    Thanks.

    JHF45 wrote:
    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

  • Configuring mutiple Business Services in Integration Directory

    Hello all,
    Got a question here. Let's say there are 10 different external parties and I intend to create a Business Service for each of them in ID.  However, they all call the same Outbound Interface to interact with XI.  Do I have to also create 10 different Receiver Determinations?  That's sounds quite some repetitive works.
    Regards,
    Steve

    Steve,
    I think I should have put my explanation better.
    If you are going to have<b> multiple Sender Business Services</b> , (sending the same data) , in this case you would need multiple Sender Comm Channels, Sender Agreements and correspondingly Receiver Determinations.
    But, if your case is such that the Sender Service is same but you need to send the data to multiple receivers, you need not have multiple receiver determinations but you can add multiple Receivers in the same Receiver determination and conditionally route the data.
    Regards,
    Bhavesh

Maybe you are looking for

  • 'Keep Header' Option in SOAP sender adapter not working

    Hi all I have exposed  a webservice using a SOAP sender adapter in XI. A SOAP client is sending request to this service. The SOAP request has some elements in the header like wssecurity and ws addressing tags. When I remove the header elements and se

  • Problem with 2630

    I got a new phone a few days ago, and I have a very simple but annoying problem. When I recieve a call, the contact name and number don't come up. It only says 'Call'. If I miss the call, there is no way of tracing who called me, because there is no

  • My Iphone vibrates after upgrading to IO6 even with vibration off

    After upgradin my Iphon 4 to io6 it vibrates even with vibration turned off.  What gives?

  • Where can I buy Contribute 3?

    Hi, I'm using Dreamweaver 8, and want to buy a compatible copy of Contribute - which I think is Contribute 3. (I assume that later Contribute versions are not compatible). I'd be grateful for information about suppliers that stock Contribute 3. Thank

  • IE Settings for EP 7.0 (netweaver 2004s)

    Hi, Is there a separate guide for IE settings (IE Version 6.0 and above) that need to be made for the portal to run without any errors on the client side? (EP 7.0) Thanks and Regards, Antony.