No Illustrator forum to ask questions?

Hello
I am sorry to post this question here however, I have searched and searched for a forum where I can post questions about Adobe Illustrator. The only thing I have found is a place where I can read other peoples questions. I can type a question but below it says something like: You cannot create new documents. ????
I am a newbie to Ps and Ai (and other adobe products) and being able to come to these forums is a huge help and time saver.
So, does anyone at all know where I can post a question regarding Illustrator? I would more than appreciate your help with a link and/or any other information you may have about forums for Ai.
Feeling rather befuddled.
Hope you're having a wonderful day/night

Hello
thank you for your reply.
i don't know why but for whatever reason i couldn't get that page to come up.
so, thanx a million
Kara

Similar Messages

OT: Please search forum before asking questions (was:IMPORTANT FOR ALL !!!!)

i want to see a new question , all of your questions has a answers in the forum please searsh before you asking , Thanks

It is true that most people do not search the forum. They are usually concentrating on their problem and not realizing that most of the time someone had that problem before them and the question has been answered. Earlier, I had a post entitled "Most Asked Questions". Maybe we should have a FAQ blog or something to compile those questions again with some examples???

Is this the proper forum to ask questions about the Photoshop Express app?

I had an iPod that I had downloaded the free app Photoshop Express. I then got an iPhone 4 and put the app on that. While it was on the 4 I purchased the pack for 4.99 the advanced pack, and I also bought the Reduce Noise and De-Fog functions. I now have gotten an iPhone 5 and I have been trying to Restore those Purchases but it will not actually do it. I have deleted the app, signed out of my Apple ID, that didn't work. I then signed into my boyfriend's Apple ID (sometimes I am signed in under his ID to buy apps when I don't have enough on my debit card). That also didn't work though. I am at my wit's end. Can I have a refund or get those features to work?

Of course, not.
See this.

Best illustrator forums - also rotating

Whats the best sites for illustrator forums, for asking questions about using illustrator? I like the adobe forums for technical issues but I've never used it for use issues. Any suggestions?
Also, Earlier today I wanted to rotate a line 9 degrees, and copy. It was to make a locker lock. 40 little hash marks around a circle. I put the registration point in the center of the circle, but is there anyway to precisely put in 9 degrees. If I move the registration point then it seems like I can't type in an exact measurement. I used the mouse and the little tool tip helped me get close, but I could never hit 9° exactly.
Hopefully that made sense, its kinda hard for me to describe these things well.

Option-click with the Rotate tool where you want the center of rotation and to get the Rotate dialog which will allow precise numerical rotation. Then use Cmd(Ctrl)-D to repeate the transformation as many times as needed.

Asking Questions in different forums...

I used to be able to figure out how to ask questions in individual forums easily. Last night, from my home computer, I could NOT figure out how to ask any forum any question.
I am now at work on a Dell Something-or-other PC and it works easily.
Why is this???
Thanks for your help - Dennis

Hey denmicone - you think that's bad, I can't even figure out if you're asking a question or making a statement... OR are you saying you could not POST a question 'cause your iMac wasn't working right over your internet connection at home. You think your puzzled, I'm already lost and it's only 7:30AM, please enlighten us, Good luck, Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - HP Pav and Toshiba Sat Mac OS X (10.4.6)

Hi everyone, not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Hi everyone
Not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Phoenix and Firebird were what Firefox was called before Firefox was settled on in 2004, and both used "birds" as the logo. IIRC, the dinosaur was used in the Mozilla Suite.
Here are the earliest versions of the Mozilla Suite. <br />
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/
I hope this request for a historical purposes of where Mozilla came from, because those old versions aren't safe to use on the internet any longer.

Poll about asking questions in the forum.

It seems that really few users noticed the poll that's been running for a month, see this thread: Asking questions on the Adobe Forums

I personally dislike polls where the answers aren't mutually exclusive.
I voted for No. I always start a new discussion myself.
It's not because the search doesn't work, though I *have* had incomplete results from it. It's not because I don't know it's there. I voted for the second entry because because I'm a regular who asks fairly few questions, and for the few times I do start a new thread I would like to specifically make a new discussion. I already pretty much know what a search will (or won't) turn up.
But what decisions will get made due to my choice of #2, which contributed a fair percentage to the results since only 11 people have voted so far? That the "Ask a Question" field should be eliminated?
-Noel

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

The Top10 most frequently asked questions and answers (FAQ) November 2008

Dear SAP Business One Community members,
We will provide you on a regular base the top10 most frequently asked questions together with the releated answers.
The Top10 from November:
1. Where do I find the Supported Platforms for SAP Business One?
Follow the path:
SAP Channel Partner Portal
=> SAP Business One Resources
=> Product Availability
=> Supported Platforms
[Quicklink|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000707728&_SCENARIO=01100035870000000183&_ADDINC=&_OBJECT=011000358700001241092005]
2. What is the Scope of Support for 3rd party addons for SAP Business One?
Any issue related to an third party addon, does not come under the purview of SAP support scope. Please refer to the [SAP Note 844036|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=844036] for SAP SDK support scope.
3. Which dot-matrix printers are supported in SAP Business One?
The three types of Dot Matrix printers which are supported are:
〇 Citizen PROdot 300
〇 Epson FX-880
〇 OKI MICROLINE 320 Elite
You can find this information also on the [Best-Practice System Setup and Sizing landing page|http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000706968&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700001077772007] or directly in the [SAP Business One System Requirements Guide|http://service.sap.com/sapidb/011000358700000310652008E.pdf]
4. How is check printing done in SAP Business One 2005 and 2007?
Please see therefore the following notes:
〇 [SAP Note 903135 Printing Procedures|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=903135]
〇 [SAP Note 1248534 - Cheque/Check Printing - skipping of cheque/check numbers|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1248534]
Please go also through this [EES session|http://service.sap.com/~sapidb/011000358700000326662008E]

5. What kind of picture files are supported in SAP Business One 2007 A?
As of SAP Business One 2007 A March patch, the supported formats in both the application and SDK for graphics are JPG, BMP, PNG and PCX. In a future release the Online Help is to be updated with this information.
Please see therefore the following note:
[SAP Note 1137796 - Approved picture formats JPG, BMP, PNG, PCX update help|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1137796]
6. How to know which field name related to which DB field name?
See therefore the [SAP Business One Help file|http://service.sap.com/~sapidb/011000358700000187612007] - Search: "System Information" (1 st entry )
The left-hand corner of the status bar displays field and error messages.
To display field position the cursor over a specific field and see that the field name and length appear. In addition, you can display for each field on a window. First, choose View --> System Information. Then, position the cursor over a field and see relevant to that field appears.
Different types of messages appear in the status bar.
7. How can I do a development request for SAP Business One?
If the request is about a non-legal issue please post your request in the [SAP Business One Product Development Collaboration forum|/community [original link is broken];. If the requested function covers a legal issue use the template from the note below.
Please see therefore the following note:
[SAP Note 1028874 - Missing Functionality / Product Development Collaboration|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1028874]
8. What is the scope of support for SDK (e.g. partner asked support to provide an example of code for an issue)?
SAP Business One Product Support will support issues where an issue is present due to an application error. However, in particular when it concerns any kind of customization, we would like to ask before logging any issue to support to locate the area where the issue occurs, i.e. in case of queries or SDK code to only send us the part of the code/query where the error appears or respectively a simplified sample of the code/query. The same applies for other customizations like PLD, XLReporter, etc.
See also [SAP Note 1012023|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1012023]
9. How do I do to block user access to TOOLS menu => User table?
define an additional authorization for the tables you would like to put restrictions on. So, please go to the
Administration -> System Initialization -> Authorizations -> Additional Authorization Creator
and then create an additional authorization by giving its Permission ID and Name, and specify the Form ID in the lower left part of the window (to find the Form ID you should set the Debug Information active under the View menu, and then hover your cursor over the form window, then you will see the Form ID at the bottom line of the SAP Business One window).
10. What is the scope of support for the demo DB?
Please note that for Demo DBs only reproducible bugs are being supported. There is no support for database corruptions, as Demo DBs are not meant for productive use and a clean Demo DB can be installed for testing purposes.
See also [SAP Note 1099700|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1099700]

How long can a DVD be? A much asked question.

I apologize because I am sure this is a much asked question but in searching the forum I haven't been able to find the answer.
What is the maximum length of time for a movie exported from Final Cut Express to be burned using iDVD?
I am getting a message in iDVD telling me that I have exceeded the limit and the DVD can not be burned. I'd like to know what that limit is before I re-edit or break the project up into pieces.
Thanks

One way around the two hour (or slightly less) time limit in iDVD is to go to the "Project" menu item, click on "Project info" and change "Media type" to "8.0GB (Double layer)". Burn to a disk image and mound the .IMG file on the desktop. The resulting VIDEO_TS file will be greater than 4.3GB and too large to fit on a single layer blank DVD. The file can be compressed to fit a single layer blank DVD by using DVD2ONEX or DVDRemaster. Both programs are shareware - available for evaluation on VersionTracker.com - and both do a good job of preseving visual quality while compressing the size (not the length) of the VIDEO_TS file. This is a very useful workaround for those occasions when a project is too long.

I forgot verification Asked Questions Is it possible to send the answers to my e-mail

I forgot verification Asked Questions
Is it possible to send the answers to my e-mail

khalid
This is not Apple. This is a user forum. We are users just like you.
You will need to contact iTunes Support, http://apple.com/emea/support/itunes/contact.html (select Account Security as your help topic)
Even after you reset your security questions, it is highly recommended you add a rescue email address. To do so, log in at appleid.apple.com and click on Password and Security. Answer the questions and then click on "Add Rescue Email Address:"

HINT: How To Ask Questions The Smart Way

Before you consider asking a question in this forum, here is a document worth reading:
How To Ask Questions The Smart Way
http://www.tuxedo.org/~esr/faqs/smart-questions.html
Jesper

Jesper: You know this will only fall on deaf ears and blind eyes. We will still have people posting with the subject: "HELLLLLLLLLP!!!!!!" But, nice try.

Forum for licensing questions

From time to time we get questions in the Database forum asking questions about licensing (case in point Re: Developer License). I expect the other forums get them too. These are tough for us non-Oracleers to answer, and we certainly need to caveat things.
It would be helpful if there were a dedicated and moderated forum on this site where we could point them. Alternatively a set of FAQs that answered the standard questions would be useful.
Cheers, APC

here's Re: URGENT: dual core computation formula article.
I notice the lack of response from OTN to this thread, which isn't like you at all Justin (K). Given the relatively poor showing of database licences in the recent profit announcements one would have thought that Oracle would be making more of an effort to deal with enquiries from people wanting to buy them.
Cheers, APC

I need to de-authorize a previous install in order to reinstall CS5. i asked in this forum and the answer told me to come back to this forum and ask how? I am no further than I was before.

I need to de-authorize a previous install in order to reinstall CS5. i asked in this forum and the answer told me to come back to this forum and ask how? I am no further than I was before.
I was told to go to a website to download CS5 software but I already own the CS5 software. Then I was told to go to webchat to get "them" to deathorize the old install. But I was in webchat (as I am now) when I first asked this question. The answer seems circular and gets me no farther toward reinstalling my CS5.

This is not web chat. This is the forum, which is an extension of the Adobe Support system, but you need to talk to Adobe Support directly either by chat or by telephone and they can process the deactivation.
There has been a problem lately with the links for getting into the web chat and for the phone support. Try the following link and look down the page for a chat option. If you don't see one, try using a different browser.
Contact Customer Care
If you still cannot see it then you might try the phone route, which would be unfindable as well if the chat is not appearing. But the info for that is...
Call: 800-833-6687 Monday—Friday, 5am—7pm PT

When asking questions - always post web site url ( address )

We keep getting people ask questions and to help we need to
see the code, so PLEASE post the website address.
If you don't want to make site live - put it into a test area
www.example.com/test/
without seeing the code - we would just be guessing
Malcolm

Those who *NEED* it, won't use it. That's the very
frustrating thing about
this. How many posts do you see where within 5 threads of the
post, the
EXACT SAME QUESTION IS ASKED AND ANSWERED?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"P@tty Ayers ~ACE"
<[email protected]> wrote in message
news:g6v96u$1hk$[email protected]..
>
> "Malcolm _" <[email protected]> wrote in message
> news:[email protected]..
>> On Fri, 1 Aug 2008 10:04:06 -0400, "P@tty Ayers
~ACE"
>> <[email protected]> wrote:
>>
>>>
>>
>>>
>>>It was like that a few years back. It's useful,
but somebody has to spend
>>>many hours on it. :-) I know how to set up a free
wiki, if somebody
>>>wants
>>>to take it on.
>>>
>>
>> Thanks Patty - I've been a member here for about 5
years - ( I
>> started with MX ) !!!, so it must have predated
that.
>
> Yeah, there had been at least 2 major FAQ sites in the
couple of years
> before that. I started with DW2 and started using this
forum in 2000.
> There are only a few others here who will remember!
>
>> I would most certainly help - using my knowledge -
but that is limited
>> compared to some of the ACE's and others here.
>> Clearly it would take sometime to put together,
agree who was going to
>> do what sections. But once released to the wild it
would hopefully
>> grow organically.
>
> I would think a Wiki could be set up, and people could
submit whatever
> articles they wanted. I'm checking out a free Wiki
application; I wouldn't
> mind setting it up, but I'm not going to be responsible
for it. :-)
>
> --
> Patty Ayers | www.WebDevBiz.com
> Free Articles on the Business of Web Development
> Web Design Contract, Estimate Request Form, Estimate
Worksheet
> --
>

No Illustrator forum to ask questions?

Similar Messages

Maybe you are looking for