No Longer Connects through

I just recently reinstalled Documents to Go and transfered several files to the card.
After this transfer, my TX will no longer connect to my computer through the usb cable or the usb cable/cradle.
When I place the TX in the cradle and turn it on, it appears to try to connect. Ttwo tones are eturned from the computer, (showing it is trying to connect - I beleive) then immediately returns three tones (showing that connection was not established - I believe). These sequence of sounds repeats continually every 7 or so seconds. Connection is never established.
Any suggestions?
Post relates to: Tungsten T5

Do you see the hot sync icon (circle with red and blue arrows) on the bottom right of your computer screen? Is there an arrow with the option to "show hidden icons"? If you do not see it there, hot sync will be disabled and you will keep getting that message (the connection between your device and the desktop could not be established...). To enable the hot sync program once again, click on Start > Programs/All Programs > Palm OS Desktop/Palm One > Hot Sync Manager. It will take about 5-10 seconds and the icon will be there once again. Now the sync should go through.
Post relates to: Tungsten E2

Similar Messages

My iPhone 3GS no longer connects through Bluetooth to my MacBook Air, nor my BMW X3. Is this fixable?

My iPhone 3GS no longer connects through Bluetooth to my MacBook Air nor my BMW X3. I've made no recent adjustments, it's just stopped functioning. Any ideas? Can this be fixed, or is my iPhone on the way out?

Problem solved!! I finally managed to pair the SE HCB-100 car kit speakerphone with the 3GS. I surfed the SE web site and it mentioned resetting the speakerphone. Tried it on 'one color ID' but it didn't work so I did it on all 'color IDs' and left it on reset mode when it 'accidentally' was picked up by my 3GS while searching!!! Found 'headset' and then recognised it as HCB-100. One happy guy for the holidays!!!

After setting up my brand new Airport Express 802.11n and accidentally using it to connect my iMac to the network...my iMac no longer connects through Ethernet? Any ideas...I have tried everything without success!!

I have been using Apple technology for about 10 years starting with 1st generation iPods and our house now includes a 5 year old iMac, all versions of iPods and touches, Apple TVs (both generations) and most recently an iPad 2. I have always told family and friends that Apple technology just works. Unfortunately that stopped today. I bought a new Airport Express 802.11n to use for AirTunes around my new pool. I set it up from my iMac and accidentally used it to connect my iMac to the network for a short time. Now I can no longer connect the iMac to the network using a hard wired Ethernet cable. I have tried resetting everything possible, from hubs to routers to the Mac itself and it just will not connect to the network through Ethernet any longer. I am now a very frustrated Apple user especially when the support site says I can't use the fast path support because my product was manufactured 5 years ago...I just bought it at BestBuy yesterday. All other computers and itechnology in the house are connecting via wifi and Ethernet without any issue except from my new iMac boat anchor. Anybody who can help me??? Thanks

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Can no longer connect through Facetime on my MacBook

I can not longer connect to other Facetime users via my MacBook Pro. Has anyone experienced this issue?

Hi PI Gadget,
Welcome to Apple Support Communities!
Take a look at the article below, it provides tips that should help you resolve the FaceTime connection issue.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Troubleshooting FaceTime for Mac
You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
-Jason

My iPad will no longer connect to my Sony wireless speaker after downloading the latest IOS software. It worked perfectly before. I have reset and reinstalled the speaker through NS setup but still no joy. Any advice would be most welcome.

My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.

Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP.

TS3297 i can no longer connect to itunes. a message comes up "we could not complete your itunes request. The itunes store is temporarily unavailable. please try again later. but when i use a different acct. it goes through right away . why did this start

i can no longer connect to itunes. a message comes up "we could not complete your itunes request. The itunes store is temporarily unavailable. please try again later. but when i use a different acct. it goes through right away . why did this start happening?

I don't know - but I am having the same problem and have not had any useful help from Apple Support. Everything they told be to do has been done and it hasn't fixed the problem.

Disconnect Device through Hotspot and can no longer connect

I recently disconnected a Windows 7 device through the "Connected Devices" option on the Verizon Hotspot. After disconnecting that Windows 7 device I am no longer able to connect through the Verizon Hotspot. I have removed and added back the hotspot profile in Windows 7 and can still not connect. I can still however, connect to other devices on the Verizon hotspot. I receive a simple error message in Windows 7 to verify the encryption settings even those encryption settings are properly set to WPA2. It appears that both devices appear to be out of synch. Has anyone experienced this with other Verizon 4G LTE hotspots? I generally just disconnect the device or turn off the hotspot when disconnecting however, I did not see any hard whatsoever in disconnecting the device through the hotspot "Connected Devices" option. Any help would be greatly appreciated as I need to get one of my business laptops that use Windows 7 back online..

If it's encryption Windows 7 is speaking of, make sure in the wireless adapter settings configuration that not only is on the correct WPA2 as you stated but the encryption matches, such as AES or TKIP.
Otherwise, removing the connection from the Preferred Wireless Networks list and resetting the device should allow a fresh new start.

My computer is no longer connecting to the TV. through HDMI

My computer is no longer connecting to the TV. I was using an HDMI and an adapter to my macbook pro 2013. It was working perfectly fine eariler today but then stopped working. I tested it on another mac and it did not work as well. The HDMI is alright since we tested it on the PS3 answers please?

Wow... I found this in another thread from the user DocBlueDog, I did this and it worked.
Looks like Apple's latest update screwed up a lot of iPod owners... that's horrible.
Anyways, if anyone is having the same problem, try this:
Re: OK Here is A WORKING SOLUTION
Posted: Feb 3, 2006 9:20 AM in response to: DocBlueDog
Click to reply to this topic Reply email Email
Just got off the phone with amazing tech support guy at www.ipodresq.com -
He talked me through this without having to send in my ipod. AMAZING.
(This is a second hand description. Evaluate it and try it at your own risk).
So disconnet your ipod. Quit Itunes.
Go to your utilities folder and look for ipod updater.
Inside you'll see a folder IPOD SOFTWARE UPDATER and DISK UTILITY.
Open DISK UTILITY AND the most recent updater IPOD UPDATER 2006-01-10.
Reset your ipod by holding down the menu key and the center key together until an apple logo appears. Plug in your ipod.
Ideally you will see it in disk utilities. In the ipod updater go ahead and hit RESTORE. Yes this will wipe your ipod of all data but hopefully most of it is in itunes or on your computer.
When updater is done HIT CANCEL and then quit updater and quit disk utilities. It should be on your desktop.
Just to be safe disconnect your ipod and reconnect it. (superstition).
Launch itunes. It may attempt to update your entire itunes library. Mine said there was not enough room so I just hit cancel.
Then I couldn't drag anything to the ipod because the ipod options were set to automatically update and I had to change it to manually update. Now I am relouding my librarys to my ipod which is working with my computer again.
WHY I should have to deal with calling apple and being told my ipod needed to be sent in to be repaired is beyond me. Love this companies products but wish they would step up more on support.
Good luck.
All best,
Rob

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

6300, no longer connecting..properly. (through usb...

My phone used to connect fine and i transferred music to the supplied memory card just fine.
Then i bought a new 2gig micro sd card and suddenly it isn't anymore. (the phone sees the memory card and i can move stuff from phone to memory card (pics etc), i have also formatted the memory card)
I tried using the old memory card in the phone in case it was something wierd with the new one, but the phone just isn't being recognised.
When installing/uninstalling nokia pc suit it displays a massage saying there is a phone connected through cable and needs to be unplugged to continue(which i do)...so it knows it's there.
I've also uninstalled pc suit + drivers, then run a registry cleaner program - reinstalled everything and it hasn't worked.
This is really annoying, it was working fine..and now for no apparent reason it just isn't.
I'm using latest nokia pc suit (6.85), latest phone firmware, windows xp sp2.
Sorry it's such a long post, just trying to be thorough in giving relavent information.
-Thanks in advanced to anyone who tries to help. Have a cookie.
Message Edited by darky89 on 16-Jan-2008 05:53 PM

Hi,
Open windows device manager, what drivers there comes when you connect your phone?
And is there any question mark or unknown device?
Try also connect your phone without memory card.

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

IPhone no longer connects to my computer over local network through apps

I've been trying to fix this for months. I've worked with technology and Apple computers for three years. I am by no means an expert but you can believe me when I say I've tried all the basics.
I first noticed the problem using FullControl. I liked to use this first thing in the morning. One morning it wouldn't connect, "Error: Connection error (22)." I hadn't updated or changed anything. I actually put my computer to sleep the night before using the app! I was on the local network. My computer was running the helper. My computer was showing up as a device in the app. But it would not connect. I figured something was wrong with the app.
So I opened up Splashtop 2. My iMac showed up in my list but with a satelite icon informing me it was not connecting on the local network. I was still on my wifi as was my computer. I used it earlier that week.
I checked out the support pages for both apps. I updated everything. I turned off, on, and checked the connections for my firewall. I turned off my security applications and followed guides to remedy blocks they might cause. Nothing worked.
I checked Apple discussions and found people having similar issues but no one had a fix. A few found success but nothing worked for me.
A few days later I went to use my Remote app. My iTunes Library showed up in the local devices but it would not connect, "Remote can't connect to your iTunes library. Check your network settings and try again." I checked. Tried again. "Could not find [my] Library." I went back to the devices and connected to my Apple TV 2 instantly. I tried connecting my iMac with the Apple TV and found no issues. Each communicated with the other fine. I tried to connect Remote to my iTunes again but it failed.
I verified and repaired my permissions. I thought the "SUID... ARDAgent.app... [permission] has been modified and will not be repaired" could've been the problem but Apple and these Discussions assure me that this is normal and not a problem.
I recently downloaded Air Playit and ran into the same problem. I set it up on my computer following the instructions. I opened the app. The app showed my computer as a "Computer on Local Network" but when I tried to connect to server, "Connect Server Failed: Cannot connect the server, check the IP, Port and try again." I did and it didn't connect.
Save for this new app, everything worked before. Nothing has worked since that morning FullContol failed (including the new app).
Is there an answer out there?!
iPhone 5 iOS 6.1.4: updated as of 06-29-2013
iMac 2007 OS X 10.6.8: updated as of 06-29-2013
FullControl (Full version)
Splashtop 2 (Full access)
Remote
Air Playit
- All apps and applications updated as of 06-29-2013

Intego's VirusBarrier X6 was blocking my iPhone's connection.
I saw that the program was blocking attempts to connect and took the address off the Blocked list. I instantly connected through everything again. It turned out to be a major oversight and easy fix!
If anyone else is having similar issues, check your AntiVandal software and make sure your devices are not being blocked.

After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Can no longer connect to encripted wireless.

Hello,
I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP. There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.
Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
I look forward to any help.
Thanks,
Martin

First of all, re-download and re-install the latest firmware for your router. After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast. Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router. I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
As a test, turn off all your 2.4 GHz devices and unplug them from the wall. This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc. Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band. See if this makes a difference.
Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption. Please explain. Are you saying that the Windows software was doing the WPA for you?
Update you computers with the latest drivers for your wireless adapters.
As infinityx mentioned, update Windows XP to at least SP2.
It sounds like you may have the Intel Pro Wireless 2200bg card. If so, this card is known to have connection problems. The problems with this card worsened with a recent Windows update, but were fixed with the latest driver. Go to the Intel web site and download and install the latest drivers.
Also, you can try another channel on your router. Since you have a neighbor on 11, try any channel 1 thru 6. (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
Message Edited by toomanydonuts on 03-16-200704:01 AM

No longer connects to home wi-fi

During the last 7 to 10 days my razr upgraded to version 4.0.4 (ICS). Sense it did this, I can no longer connect to my Wi-Fi at home.
Specifics: it would say it was connected, but when I opened a browser or went to fb or my email I would be notified that my data is turned off (it was on), or that the browser was having connectivity issues, or that my app had timed out. I have gone through all the different setting configurations on my router, nothing I changed had any effect, other than knocking my daughters phone off the wi-fi, so I changed it all back as it was before. I tried "forgetting" the wi-fi and then re-adding it, did not work.
I took my phone to a verizon store. the first thing they said was "it picks up our wi-fi, soo..." As you can imagine, after a week or so of trying all these different things, I was not in the mood to hear it was not really an issue. I went through everything I have tried with them. I asked them if they knew what frequency their wifi was set at, etc.. They reset my phone to factory settings and sent me on my way. I was hopeful.
I came home. There was a slight difference. Now, instead of saying its connected but not actually being connected, it cycles through " Turning on Wi-Fi" "Obtaining IP address" "saved" "Turning on Wi-Fi" "Obtaining IP address", etc. occasionally it will say "avoided poor connection". when it is on "saved" if I look at the connection strength, it is "excellent". Before the ICS upgrade, I had no issues with Wi-Fi connection, and the xbox and my daughters connections are fine. Nothing has changed except the ICS update.
I went back to the verizon store, they looked at it for a min and said "it connects to our wi-fi".... End result is that they are getting me a replacement phone, which has to be shipped to me from Motorola, and should be here in a week. But the phone will also have to upgrade to the ICS version. And it might not work either.
My router is a Cisco Linksys e2000. Does anyone have any suggestions on how to fix this? I have reset the router, phone has been reset, wifi connection has been forgotten and reentered many many times. I have tried switching my router from 2.5ghz to 5 ghz (daughter lost her connection then) I have gone through "mixed" "G & B Only" "B only" "G Only" "N Only". I have tried switching channel widths, and the channel itself is set to auto.. I do not know what else to try. My phone has an IP address, though it looks odd compared to other IP address's I have seen, and it has a mac address as well. Any advice would be appreciated.

Theresa20000-
Hi there! I certainly hope the replacement device works properly with your home Wi-Fi Network. I have not seen this as a common concern and am confident this is resolved for you. If you need further assistace, please let me know!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

No Longer Connects through

Similar Messages

Maybe you are looking for