No message in runtime work bench and message monitoring

hi all,
we have done one simple file to file scenario.file is not being picked up.
there is no message in sxmb_moni and runtime workbench.
In communication channel monitoring also we r not getting any adapter.
(XI installed recently).
Is there any problem with installation?
Please let me know.
Thanks,
sreedhar.

Hi,
Please check if your Adapter Engine is working fine
Please can you look at this thread. The same issue is resolved here
Unable to find an associated SLD element
Also see if your SLDCHECK is fine?
No Adpater Engine available in Communication Channel creation
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Also check as per below steps
0) Go to RWB-->Cache Connectivity Test and check the status.. and run the refresh over there
1) execute SLDCHECK in XI box
2) Go to SXI_CACHE and refresh the cache also delete the Adapter metadata
3) Check the SAP BASIS SWCV is imported into IntegratioN Repository
4) Refersh the Adapter Metadata cache in SLD>Adminisration>Cache Overview ->Adapter Metadata Cache Refresh
this doc may help u :https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39fe8fa0446
thanks
Swarup

Similar Messages

  • How to check IE error in Runtime work bench.

    scenario: File to File
    *file moves from sender  to archive folder when i start sender cc in runtime work bench but file doesn't move from archive to receiver folder when i start receiver cc in runtime workbench and i think some thing wrong in IE so can anyone help me for the same.i'm fresher so give me your solution as  simple as possible.
    Thanks to u.
    Edited by: manikandansit on Jun 29, 2010 10:41 AM

    below error am getting
      com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
    Display Stack Trace
    Stack trace for the above error message is:
    com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at jsp_FC_Secure1212318130512._jspService(jsp_FC_Secure1212318130512.java:24)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NullPointerException
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
         at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         ... 20 more
       Wait...
    Query being processed

  • Diff bet sxmb_moni&runtime work bench

    what is diffrence between SXMB_MONI & runtime work bench?

    Hi,
    Moni:
    SXI_Monitor / SXMB_MONI is used for monitoring of XML messages either in error or success or in System error and in other status. You can check messages here for all of your interfaces.
    SXMB_MONI is the monitoring tool for all the message processing and shows different pipeline steps like receiver determination,interface determination and mapping ..etc....
    You can see the status of message after reaching the Intergration server from the sender adapter to the before delivering to the receiver adapter from IS.
    SXMB_MONI is for Integration Engine monitoring, it provides Additional monitoring functions for the Integration Engine. u have outbound and inbound processes in XI and XML message processing happens in I.E in both the cases.
    u can monitor both sender and receiver XML messgaes processed in integration engine. bcz both sender and receiver messages must have to pass through I.E runtime.
    u can monitor all pipeline steps happens in I.E at runtime, and MONI displays runtime versions of xml messages.
    refer these links to understand the message flow and monitoring features:
    http://help.sap.com/search/highlightContent.jsp
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
    For BPM you can use SXMB_MONI_BPE.
    RWB
    With the help of Runtime Workbench we can able to monitor the following ...
    1. Component Monitoring --- we can monitor all the components w.r.t to xi are working fine
    2. Message Monitoring --- Here we can check the errors with Integration Engine and Adapter Engine.
    3. End -to - End Monitoring
    4. Performance Monitoring
    5. Alert Configuration
    6. Alert Inbox .. etc..,
    Just check these links:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars/how%20to%20set%20up%20alerts%20for%20monitoring%20in%20sap%20xi%2030%20-%20webinar%20powerpoint.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39fe8fa0446
    and this one for complete XI
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
    RWB :
    http://help.sap.com/saphelp_nw70/helpdata/EN/2e/278a8363b5ac4483dc1efc382e51df/frameset.htm
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

  • Using PMW(Payment medium work bench) and Classic payment medium programs

    Hi
    Can you please anyone explain the difference between PMW(Payment medium work bench) and Classic payment medium programs in the APP.
    Please let me know based on what cosideration these can be used?
    Thanks
    Rajesh

    The consideration is nothing,  it is purely based on the business requirement.
    Following information may be useful.
    SAP has provided some of the DME structures for different countries. like GB_BACS for GB etc.
    If your client is not part of those structure, probably you are required to create your own structure. It also depends on the bank of your client. They may want the file in a different format. Therefore, you need to first talk to the bank and get a sample file in which they need the format.
    You can create the DME structure by using transaction code DMEE - Tree Type is PAYM.
    You can create the DME structure as a flat file or XML file based on the requirement of your client (bank).
    You can also copy the standard structure to Z structure and modify it according to your requirements.
    Please also make sure that you have made settings in OBPM1, OBPM2, OBPM3 and OBPM4 (More importantly you should maintain the path where it needs to be downloaded)
    Complete your FBZP settings - Importantly payment methods in country, select your DME structure.
    Take help of basis consultant in order to create the directories. You can see the directories in AL11.
    If there are no directory path maintained in OBPM4, then the file gets saved to temporary directory in AL11.
    If you are using DME structure, then forget the classic payment medium.
    1. First ask the bank for the format, file type etc. Ask bank for any document available.
    2. The see for that country if SAP has provided any standard DME structure (Transaction Code DMEE - Tree Type PAYM)
    3. If this is not sufficient, then copy the standard DME strcutre and modify it accordingly to your requirement.
    4. Assign this DME structure in FBZP - Payment Methods in country. * Use payment medium workbench
    5. Check with your basis whether any secured folders are created in AL11 (where the output file needs to get generated) - If not ask them to create.
    6.Check your settings in OBPM1 / OBPM2 / OBPM3 / OBPM4 - (In OBPM4 make sure you have given the secured folder path and file name for your variant)
    7. Run F110 - Check you have maintained your variant details properly for program RFFOAVIS_FPAYM
    If you maintain all these steps correct, hope your DME file should get generated.
    Regards,
    Ravi

  • Messages displayed in the Approval and message tab in SRM approval is same

    Hi,
    We are having an issue with the message displayed in the approval step.When we click on the approval option in SRM, we get two tabs displayed Approval and Messages. The content displayed in both the tab is same for one user. Generally the content displayed in approval tab is "Here you can approve/reject shopping carts, confirmations of goods receipts, and so on.Select 'Edit' to display details" and the details in Messages tab is "Here you can see e-mails on the purchase transaction." But for this particular user the content displayed is "Here you can see e-mails on the purchase transaction." in both the approval and message tab.
    We checked the roles and profiles and its same as the other users. Can some one please suggest what would be the reason for this functionality with this user.
    Regards
    GGL

    OK, so you only have this problem in PROD, all other systems (DEV, QA) are fine... I assume you checked your BAdI transports in PROD as well... If all OK, that leads me to think there's nothing wrong with your custom code or transports.
    SRM 5.0 is notorious for these kinds of issues where workflow templates work in one environment, but are erroneous in another (most times this is due to inactive status). That is why I asked you to check the workflow for consistency in SWUD.
    From your answer, I did not understand whether you'd checked all the subworkflows separately in SWUD (not as part of the main workflow check). If you didn't do that, find all the subworkflows (and the subworkflows of the subworkflows where applicable) in SWDD by stepping through the main workflow, and then run the SWUD check on each of them separately.
    Also, please check the Review workflow WS10000265. This particular workflow may not show in SWDD as a subworkflow, but actually is part of the process. If it's broken, you may encounter issues like you're describing.
    Cheers,
    Serguei

  • Message no. VF 050 and Message no. FF 753

    I experts!!!
    I'm with a problem that i can't resolve:
    I have done a sales order with two items. It's the same material(service) in the two lines with the same price but, different MWST 0% and 20% because I changed the Tax classification material of one of the lines. When save the billing document the system send me this information:
    Document 906090009 saved (no accounting document generated)
    Message no. VF 050
    and when i try to release to accounting the billing document the system send me this error
    Tax code L6 does not appear in any G/L account item
    Message no. FF 753
    Can anybody help me? I implemented several notes but didn't resolved the problem.
    Thank You,
    Joana

    Hi G. Lakshmipathi,
    In the VKOA the G/L Account is not assigned against the Account Key, but is supposed to be? What Condition Type i have to put in VKOA, because the condition MWST doesn´t appear in the options i have? What's on VKOA:
    Acct Key
    App   CndTy.   Char    SOrg.   ActKy    G/L account no.   G/L account no.
    V       ZSAB     01       01       ASB        477050                             
    V       ZSAB     01       01       MWS      477000                             
    V       ZSAB     01       01       ZPP        665300                             
    V       ZSAB     01       02       MWS      477000                             
    V       ZSNO     01       01       ASB       477050                             
    V       ZSNO     01       01       MWS      477000                             
    V       ZSNO     01       01       ZPP        665300                             
    V       ZSNO     01       02       MWS      477000        
    The option for the conditions type that i have in VKOA i don´t have the condition MWST:
    CndTy.      Name
    KOFI      Acct determination
    KOFK      Acct Determ.with CO
    ZDE2     
    ZDE3     
    ZDEV     
    ZPSE     
    ZSAB     
    ZSNN     
    ZSNO     
    ZSRE     
    In the tcode FTXP:
    Country key           PT       Portugal                                      
    Tax code               L6                                                     
    Procedure             TAXPT                                                  
    Tax type                A        Output tax                                                                               
    Tax type                      AccKy    Tax percent.rate     Level   Fr.level   Cond.type
    Base Amount                                                          100     0            BASB       
                                     MWS       20,000                  110    100         MWAS       
    Input tax                       VST                                     120    100         MWVS       
    Non-deduct.Input Tax     NAV                                    140    100         MWVN       
    Non-deduct.Input Tax     NVV                                    150    100         MWVZ       
    Acquisition Tax Cred      ESA                                    200    100         NLXA       
    Acquisition Tax Deb.      ESE                                    210    100         NLXV                                                                               
    Tax accounts:
    Chart of accts  02                                   
    Tax code         L6                                                                               
    Transactn   G/L acct
      MWS           2433113                                   
    What seems to be the problem to you?
    Thank You,
    Joana

  • Error message in Print work bench

    Hi All,
    We got two clients in development server 100 and 101.
    Client 100 (There is not data available)
    Client 101 (Data is available)
    Test server, client is 101.
    Production server, client is 101.
    When I click on display button(EFRM Trrancation code in production server) . The following error message is displayed.
    Error message.
    "Link /pes/j_installment_letter in client 101 contains errors; target in 102 does not exist."
    The problem in both the server(Testing and Production server).
    Help required very urgent.
    Thanks in advance.
    Regards,
    Srinivas
    [email protected]

    Hi Anand,
    This should have been a seperate post, i could have got some points
    here is an extract on how to do
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
    Configuring CCMS Alerts for the Adapter Engine
    If processing of a message on the Adapter Engine fails, the message state is changed to faulty. To notify administrators immediately of such processing failures, they can be propagated as alerts to CCMS. As CCMS is the SAP standard interface to third-party monitoring tools, these failure events may also become visible in non-SAP monitoring tools.
    Configuration Steps
    To make use of Adapter Engine alerts, you must configure the connection to CCMS as follows:
           1.      Make sure that the J2EE engine on which the Adapter Engine is running is configured to be monitored by the central CCMS system.
    To do so, execute transaction RZ20 on your central monitor server. There, the J2EE engine should be visible in the CCMS monitor under SAP J2EE Monitor Templates ® All Systems. If not, follow the steps described in the Supportability Setup Guide for SAP NetWeaver 04 on SAP Service Marketplace at service.sap.com/nw04operation ® Cross-NW.
           2.      Check whether the Adapter Engine is configured to report errors to CCMS.
    To do so, start the Visual Administrator and select service SAP XI AF Core. The value of property CCMSEnabled must be set to true (in lower case letters). If it is not, change the property value to true and restart the service.
    To verify that the setting is effective, select the Visual Administrator Monitoring service. Under Root ® Applications, you should see a node for the Adapter Engine.
    cheers,
    Naveen

  • TS3999 icalendar does not work on my PC, it continues to get an error message.  It worked before and now it does not anymore

    Icalendar no longer works on the PC that I am using.  It did in the past and now it does not.  Coincidentally, this happened after my iphone was stolen and it was replaced with the iphone 5s.  Does it have to do with my settings?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Whenever I open pdf file link in net shows a message box Acrobat plug-in and message as "This operation is not allowed" and after firefox getting crashed. I observed twice

    Details of Crashing Information
    AdapterDeviceID: 2562
    AdapterVendorID: 8086
    Add-ons: {d47a9f51-8281-43fa-f450-f28ef8735e9a}:2.1.1,[email protected]:3.6.5.112,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0
    AvailableVirtualMemory: 1923440640
    BuildID: 20110318052756
    CrashTime: 1304770256
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536

    I'm replying to this old thread for anyone looking for this problem in the future ( like I did ).
    The problem for me was that the original .pdf had a single blank comment in it.
    I opened it in Acrobat pro, deleted the comment, saved, opened it in livecycle, changed the illustration ( or whatever you had to change in the first place ), save it again, opened it in Acrobat and save for Reader Extended PDF.
    It now works
    PS: nice job Adobe with useless error messages. Just saying "Comments are not allowed" instead of "This operation is not permitted" would have saved countless hours to countless people.

  • How to disable duplicate message from imessage on Mac and Messages on iPhone?

    I Just purchased an iPhone 4s. Previous to that, i have been using messages on my macbook pro. When i finally got the two synced up together so that messages were being delivered to my phone when i was away from my computer, i noticed that i received notifications for messages on my phone even when i was on iMessage on my mac. Is there a way to change this so I don't get double the notifications, or do I have to disable iMessage on my phone every time I'm at my computer using messages?

    You are correct.  The only way to stop it, is to turn off iMessage.  Your frustration is actually the reason they made iMessage.  It was designed so you could be working on your Mac, and if you recieved a text message, you could reply with out having to locate your phone.  I understand it can be frustrating because in my expeirence, when I'm away from my desk, anyone with access to my computer can then sit there and enjoy my conversation with out me knowing about it... I have since started logging out of Messages on my Mac when I walk away.  then no one can see it, and when I log back in, the messages are synced back up again.  Good luck!!  Cheers!

  • XI Runtime Work Bench integration in SAP EP

    Hi,
    I have a requirement which needs integration of XI Runtime Workbench in Portal.
    The requirement is to view the error messages in Portal.
    Can we directly call the error details screen using the error code.
    Best Regards
    Sid

    IN RWB ther are various moniotinrg options...so have to monitor based on the interface details or date and also it will alow you to monitor like all the errored out messages etc....

  • Alert Category - Runtime Work Bench

    Hi Experts,
    Can any please let me know how to logon to Runtime Workbench (RWB) to create an alert rule...as I'm new to Alert Management?
    Thanks in advance,
    Regards
    Vinod

    Hi,
      To add an alert rule, you will first have to select the Alert category.
    In your Alert Configuration page, click on UPDATE TABLE. Then, click on the SQUARE button on the left of your ALERT CATEGORY.
    After you select the Alert Category, the ADD RULE button will get anabled.
    Check XIRWBUSER Roles are below;
    SAP_BC_BASIS_ADMIN
    SAP_BC_BASIS_MONITORING
    SAP_XI_RWB_SERV_USER
    SAP_XI_RWB_SERV_USER_MAIN
    Also it may be due to browser privacy and security issue.
    Go to Privacy in ur browser and set accept all cookies....
    Regds,
    Pinangshuk.

  • Runtime work bench

    send one message from RWB to IS

    Hi Mahesh,
    If you feel your question has been answered please mark the thread as answered.
    It is not necessary to give points to mark the thread as answered.
    It would help others when they face similar problems to figure out which thread to see.
    Regards,
    Sumit
    ps: All your threads/questions raised by you are unanswered. You can mark them as answered too if you got the answers.

  • Getting messages "startup disk is full" and activity monitor is showing "syslog d" is using a lot of CPU.  I'm planning on getting more memory for my late 2008 model Macbook but wondering if there's something that is causing problems that I can also fix.

    I had closed out of all of my programs but heard the internal fans running so I checked the activity monitor.  It shows syslog d as the top process using the CPU right now.  I have no idea what that means.
    I read a thread about the startup disk being full and how you can free up memory.  I have an airport extreme so TimeCapsule is backing up everything.  I do have a bunch of pictures on iPhoto on the laptop;  could move those to another location but I'm a little gunshy.  I know they are on the TimeCapsule but I would like to save them to a second place before deleting from laptop just to be sure.  I went through several things yesterday and emptied trash, etc.  I wasn't able to locate the hidden files that the thread about the startup disk being full was referencing --- they were talking about large emails that were causing processes to happen taking up the CPU.... I wasn't able to find out if that was the case for me. 
    Also I'm going to look into getting another 2MB of memory and installing it on the Macbook, so I can upgrade to the latest OS.  Anyone have an idea if that is worth the $$$ over buying a new laptop?  Or anyone have ideas as to where to buy memory, etc.
    Any ideas - help!

    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
       http://support.apple.com/kb/PH13806
    3. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    4. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    5. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409

Maybe you are looking for