No provider for Address type :

In my workflow, after instantiating the EJBs, I send a request mail to the
Manager through the WLPI workflow. Everything was going fine. But, ever
since we have moved our SMTP server to a new location, (maintaining the same
host name ), I have been getting errors from WLPI when the mail is to be
sent.
If I remove the Action which sends the mail (in the Start Node), I don't get
these errors, the instance of the flow is created and all is fine MINUS the
mails being sent.
But in presence of the action with mail sending functionality, neither the
flow instance is created, nor is the mail sent.
I suspected the problem to be linked with :
1. The SMTP server setup (which does not seem to be the case looking at the
Stack Trace) OR
2. With the problem of the mail.JAR or activation.JAR files in the CLASSPATH
(both of these are in my WEBLOGIC_CLASSPATH variable. mail.JAR is the first
entry and activation.jar is the second entry)
I get the following stack dump:
No provider for Address type: rfc822
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(W
orkflowProcessorBean.java, Compiled Code)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:124)
at com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java, Compiled
Code)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(Workflo
wProcessorBean.java:709)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWithError
Handling(WorkflowProcessorBean.java:1098)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantiate(Work
flowProcessorBean.java:705)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.instantiat
e(WorkflowProcessorBeanEOImpl.java:466)
at
com.bea.wlpi.server.eventprocessor.EventListener.checkTrigger(EventListener.
java, Compiled Code)
at
com.bea.wlpi.server.eventprocessor.EventListener.onMessage(EventListener.jav
a, Compiled Code)
at weblogic.jms.client.JMSMessageConsumer.readQueue(JMSMessageConsumer.java,
Compiled Code)
at weblogic.jms.common.MessageQueue.execute(MessageQueue.java:748)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Any help will be highly appreciated. Kindly mail to [email protected]
Thanks
Preyas

Similar Messages

Javax.mail.NoSuchProviderException: No provider for Address type: rfc822

Use JavaMail 1.2 send Mail Errors:
"javax.mail.NoSuchProviderException: No provider for Address type: rfc822"
Why?
Can you supply a stmp server name?
Thanks.

[skyask],
Honestly, I am not very sure where the JVM is located for the WebLogic 5.1 application server. You probably need to contact your local BEA rep office for support.
The jar file for the JavaMail API is either mail.jar (contains the API libraries) or mailapi.jar (contains the API libraries and all the providers), so I guess if you search the WebLogic directories, you might be able to locate it.
It also depends on the OS platform that you are working on and the WebLogic installation documentation may give a clue or two where the .jar files for optional Java packages are found.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

No provider for Address type : rfc822

In my workflow, after instantiating the EJBs, I send a request mail to the
Manager through the WLPI workflow. Everything was going fine. But, ever
since we have moved our SMTP server to a new location, (maintaining the same
host name ), I have been getting errors from WLPI when the mail is to be
sent.
If I remove the Action which sends the mail (in the Start Node), I don't get
these errors, the instance of the flow is created and all is fine MINUS the
mails being sent.
But in presence of the action with mail sending functionality, neither the
flow instance is created, nor is the mail sent.
I suspected the problem to be linked with :
1. The SMTP server setup (which does not seem to be the case looking at the
Stack Trace) OR
2. With the problem of the mail.JAR or activation.JAR files in the CLASSPATH
(both of these are in my WEBLOGIC_CLASSPATH variable. mail.JAR is the first
entry and activation.jar is the second entry)
I get the following stack dump:
No provider for Address type: rfc822
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(W
orkflowProcessorBean.java, Compiled Code)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:124)
at com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java, Compiled
Code)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(Workflo
wProcessorBean.java:709)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWithError
Handling(WorkflowProcessorBean.java:1098)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantiate(Work
flowProcessorBean.java:705)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.instantiat
e(WorkflowProcessorBeanEOImpl.java:466)
at
com.bea.wlpi.server.eventprocessor.EventListener.checkTrigger(EventListener.
java, Compiled Code)
at
com.bea.wlpi.server.eventprocessor.EventListener.onMessage(EventListener.jav
a, Compiled Code)
at weblogic.jms.client.JMSMessageConsumer.readQueue(JMSMessageConsumer.java,
Compiled Code)
at weblogic.jms.common.MessageQueue.execute(MessageQueue.java:748)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Any help will be highly appreciated. Kindly mail to [email protected]
Thanks
Preyas

In my workflow, after instantiating the EJBs, I send a request mail to the
Manager through the WLPI workflow. Everything was going fine. But, ever
since we have moved our SMTP server to a new location, (maintaining the same
host name ), I have been getting errors from WLPI when the mail is to be
sent.
If I remove the Action which sends the mail (in the Start Node), I don't get
these errors, the instance of the flow is created and all is fine MINUS the
mails being sent.
But in presence of the action with mail sending functionality, neither the
flow instance is created, nor is the mail sent.
I suspected the problem to be linked with :
1. The SMTP server setup (which does not seem to be the case looking at the
Stack Trace) OR
2. With the problem of the mail.JAR or activation.JAR files in the CLASSPATH
(both of these are in my WEBLOGIC_CLASSPATH variable. mail.JAR is the first
entry and activation.jar is the second entry)
I get the following stack dump:
No provider for Address type: rfc822
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(W
orkflowProcessorBean.java, Compiled Code)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:124)
at com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java, Compiled
Code)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(Workflo
wProcessorBean.java:709)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWithError
Handling(WorkflowProcessorBean.java:1098)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantiate(Work
flowProcessorBean.java:705)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.instantiat
e(WorkflowProcessorBeanEOImpl.java:466)
at
com.bea.wlpi.server.eventprocessor.EventListener.checkTrigger(EventListener.
java, Compiled Code)
at
com.bea.wlpi.server.eventprocessor.EventListener.onMessage(EventListener.jav
a, Compiled Code)
at weblogic.jms.client.JMSMessageConsumer.readQueue(JMSMessageConsumer.java,
Compiled Code)
at weblogic.jms.common.MessageQueue.execute(MessageQueue.java:748)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Any help will be highly appreciated. Kindly mail to [email protected]
Thanks
Preyas

NoSuchProviderException: No provider for Address type: rfc822

this is the stack : No provider for Address type: rfc822
javax.mail.NoSuchProviderException: No provider for Address type: rfc822
     at javax.mail.Session.getTransport(Session.java:475)
     at javax.mail.Transport.send0(Transport.java:154)
     at javax.mail.Transport.send(Transport.java:80)
I know what it means....but why it happens?
please help!!!!!!!!!!!!

[joyrex75],
I suspect that the CLASSPATH settings on the machine that you are using is pointing only to the mail.jar file. If you are setting up the Java runtime environment that includes only the mail.jar file, your runtime environment will not have the mail providers such as the POP3, IMAP or SMTP .jar files.
Point your CLASSPATH to the mailapi.jar file which contains the JavaMail APIs and all the mail protocol providers that SUN supports i.e. POP3, IMAP and SMTP. Try to execute the java command on your JavaMail application and see if throws out the Exception again.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

No provider for address type:rfs822

HiI have developed a application from which i am trying to send mails using Java MailApi's.The application is running perfectly fine with JavaWebServer2.0.But when try to run in Wlc6.0 i am getting above said error.Any help in this regard will be highly appreciated.Thanks

There's two possibilities.
1. You're doing it wrong.
2. Tomcat is seriously broken.
Since a lot of people successfully use JavaMail with Tomcat,
I suspect #1.
Did you check the instructions in the FAQ for configuring Tomcat?
They're kind of old but they might help.
What version of Tomcat are you using and what exactly did you do to
add mail.jar and activation.jar?

Help - Business Partner "Error in conversion Customizing for address types"

Hi Experts,
I am encountering an error with maintaining the Payer/ee in the Payment Details (SI) tab under Counterparty company code.
The error message I get is below --
*Error in conversion Customizing for address types (-> note 594871, III)
Message no. FTBU800*
I need your kind help please to troubleshoot this issue.. I receive the same error when i book deals and try to view the "Payment Details" tab during TX01 or TM01. I am not sure anymore what could be causing this problem.
Thanks,
David

Hello Raj,
Impliment the correction as specified in the sap Note 594873.. sect III.
You can take the help of your basis team for downloading it Using Tcode "SNOTE" and if you have sufficient authorizations you can do it your self..
another option is to down load the Note from the service market place and get the correction implimented manually by a technical consultant.
Wish you success.
M. Naveen Kumar

Table that maintain address type corresponding to value in PA0006

Hi,
I am looking for a table that maintains different address type with description. Can anyone help me?
Sunny

Hi Sunny
The field in PA0006 is ANSSA which is for address type. But the back end table for values T591A.
If you create any record in PA0006 with the address type 05 mailing address, then you can view the same in pa0006 table under the field ANSSA.
But Here the Adress type is nothing but your subtype.
Regards
Suresh

Limit Address Type in SSHR

Hello,
I am trying to limit the LOV for address types in SSHR and I am unable to "disable" some of the records as they are "protected against update".
If you go to lookup table;
US Super HRMS Manager > Other Definitions > Lookup Tables > Query "ADDRESS_TYPE"
I am trying to "disable" Recruiting ( CODE REC) and Temporary Offer Address ( CODE TMPMAIL) but it is protected. Does the access level of the table have anything to do with it? How can I disable it or make it not show as an option in SSHR?
What does it mean exactly when the table is extensible ( I understand that the definition is that it is able to be updated for future growth) but I am not sure if that is limiting me from deleting or disabling those types. I am unable to end date the option or add a "-US" tag as those fields are grayed out too.

Hi IVN,
An extensible lookup is one which you can add to but cannot amend the seeded values.
One way is to use Help - Diagnostics - Examine
and set the ENABLED_FLAG to N
But this is not supported by oracle, so you need to be cautious.
Cheers,
Vignesh

Microsoft OLE DB Provider for Oracle: Data type is not supported.

I got the error:
Microsoft OLE DB Provider for Oracle: Data type is not supported.
Shortly after upgrading from Oracle 8 to Oracle 9. I was advised to download more up to date oracle drivers, but I was wondering if there was a way to tell what version of the 'OLE DB Provider for Oracle' is already at. Is there a command I can use via SQL Plus or something?

I have found Microsoft ODBC for Oracle to be more stable than the Microsoft OLEDB for Oracle driver. I have also found both Microsoft ODBC and OLEDB drivers to be more stable than the drivers from Oracle.
You could always get the latest MDAC (Microsoft Data Access Components) from Microsoft's MSDN Download site and then get the ODAC (Oracle Data Access Components) from Oracle's OTN Download site. ODAC requires MDAC. And ODAC has the latest drivers.
I suppose it would help to have the latest patches for your Oracle client software too. Maybe Oracle MetaLink would have these?
It may even help to have the latest service pack for Visual Studio 6 (Visual C++ 6 and Visual Basic 6) too.

Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

Hi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu

Regarding invoice address for document type

Hi friends,
I want to know how to print the INVOICE ADDRESS for a perticular document type if user-id is not exist.
Please suggest me the suitable code for the above requirement.
Regards
Kumar

Hi,
Check Table RBKP & Field name RMWWR for Gross invoice amount & BLART for document type.
Regards,
Biju K

Providing the message types to included for change pointers

Hi Everyone,
How can we Provide the message types to be included for change pointers.?
How can we turn-on Change pointer update generally?
Iam converting the idoc to XML format in XI , So. i need the queries to solve( understand)
Thanks
Manju
P.S. Points will be rewareded

Hi Manju,
How can we provide the message types to be included for change pointers?
You can use transaction BD50 to activate change pointer for a message type.
How can we turn-on change pointer update generally?
You can use transaction BD61 to activate change pointers generally.
Regards,
Ferry Lianto

Need OLAP Server Type 'Microsoft OLE DB Provider for Analysis Services 9.0'

We have two Crystal Developer machines (CR2008 - SP1 installed on both). We need to connect to an OLAP datasource
One machine has these three Server Types available to select from:
   Hyperion Essbase (7.0,7.1)/IBM DB2 OLAP(8.2) Enhanced
   Microsoft OLE DB Provider for Analysis Services 9.0
   Microsoft OLE DB Provider for OLAP Services 8.0
The other machine has the following as the only available Server Type:
   Hyperion Essbase (7.0,7.1)/IBM DB2 OLAP(8.2) Enhanced
We need access to the Microsoft Server Types for this machine as well.
The Data Access components installed (from CR2008 - SP1) on both
machines appear to be the same.
How do we get these installed so we can access them from Crystal?
Thank you

Do I need the SQL Client tools on my machine? I though I had read this on a website somewhere, but now am unable to locate it. Can someone please confirm if this is the issue why I am not seeing this server type? Thank you.

Can WLC's built-in DHCP provide IP addresses for wired client?

Hi,
We've got a WLC running on 7.0.98.0. It's providing IP addresses for the Guest Wireless users. Now we'd like to put a couple of wired workstations for those customers who don't bring laptops. I'm wondering if I put these workstations on the same guest wireless vlan, they can still get IPs from the WLC. If not, I have set static IPs on these workstations.
Thanks in advance.
Robert

Rob:
The answer is simply "No". WLC can not provide wired clients on same wireless VLAN with IP addresses if the DHCP is configured on WLC.
The case metnioned by fbarboza above is a "very" special configuraiton on WLANs where the WLC is configured to take care of some wired clients and it needs you to have two WLCs (The featured is called wired guest).This special case does not apply at your situation.
With your situation my answer above applies.
Note A internal DHCP server pool will only serve the wireless clients of that controller, not clients of other controllers. Also, internal DHCP server can only serve wireless clients and not wired clients.
Reference: http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70wlan.html
HTH
Amjad

Maintaining Service Arrangement for Employees: Address type-ID not availabl

Hello,
I´m facing the following problem while implementing CRM Service via Best Practices for CRM V1.70:
Building Block Configuration Guide C26 CRM SERVICE:
Section 3.3.3 WFM Core Settings:
3.3.3.1 Maintaining Service Arrangements for Employee
Assignment Block u2018Service Arrangementsu2019:
In Assignment block Location there is no address type-ID u2018XXDEFAULTu2019 for adress source u2018Organizationu2019. Thus I receive the following error message: u2018Enter a valid address usage typeu2019. Address type-ID u2018XXDEFAULTu2019 is only available for adress source u2018Individualu2019.
What exactly do I have to do in order to make address type-ID u2018XXDEFAULTu2019 also available for adress source u2018Organizationu2019.
Thanks in advance.
Best regards,
AEV

Hi,
I am facing similar problem what did you do to resolve it.
Thanks in advance.
Rahul

No provider for Address type :

Similar Messages

Maybe you are looking for