No sound fro Jabra BT530 when connected to a call

I just purchased a Jabra BT530 and I connected it to my iPhone 3G (latest software update). I CAN hear sounds from the headset when I dial a number, adjust the volume and power on/off and I can even hear music when I play iTunes. I CANNOT, however, hear sounds when I connect to a call. The person on the other end can hear me through the headset, but I can't hear them (so the mic is working, but the earpiece doesn't seem to be working in "call mode"). I played around with the volume and speaker settings and disconnected and reconnected the headset with no luck. I just thought I'd check these discussion to see if anyone had a similar problem and resolved it before I return the headset. Any ideas/suggestions?
Thanks in advance.

I am currently using the same headset and have not faced this issue, apart from the other one [described it this thread|http://discussions.apple.com/thread.jspa?threadID=1804116&tstart=0]. I would suggest you erased your headset from the iphone through Settings>General>Bluetooth and pair it again.

Similar Messages

Where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

Hi,
HDMI sound is actually comes with the video card. DV6 is a reries of dozens if not hundreds of models, which one is yours ? Please use the following steps to check and fix:
General Instructions for Setting Up HDMI Audio
Preliminary steps:
1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.
2. HDMI has its own audio driver separate from the audio system of the computer ( Sigmatel, IDT, or Realtek ) . It is incorporated into the graphics card's driver so make sure you have the newest version of your graphics card driver. On models with Intel graphics the HDMI audio driver will appear in the Device Manager as "Audio Device on High Definition Audio Bus".
3. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.
4. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.
Make the Connection:
1. Connect the HDMI cable to the computer and TV. If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.
2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.
3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)
4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.
5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)
Post Connection Problems:
1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. A few people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver (instead of downloading the driver from the Dell support site).
2. Try disconnecting and then reconnecting the HDMI cable.
3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to
Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".
4. Try a different HDMI cable.
5. Try a different HDMI port on the TV.
Source: Dell forum
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Skype wont let me hear game sounds through my headphones when im in a call with someone

im a gamer and i use skype to communicate with my friends while we play games and I often want to use headphones but when im in a call with someone the game sounds go through my laptops speakers instead of my headphones and its hard to hear the games sounds because i have my headphones in

k it is still does it if im in a call and i open a game like binding of isaac all my sounds get disabled but the skype call sound comes back and so does my itunes but the binding of isaac sounds gets muted.

No sound when connected to phone calls

Hi all, Got my first BB (a Curve) on Monday. Twice now I have dialed a call, it has connected, and I am unable to hear their phone ring or hear the voice on the other end, and neither can they hear my voice. (I know it has connected, because one of the calls was to my son when he was beside me!) Each time I have gone into contacts to make the connection...one time it worked the second time there was still no sound. This morning I received a call and the same thing happened. It is almost like the phone is muted both ways. I have rechecked my settings and yes, the volume was up and the mute was off. I have spoken to other users that I work with and none have had this issue. Do I have a simple setting wrong or is the BB having some issues?
Thanks
Solved!
Go to Solution.

I read a lot, I mean ALOT of posts, and there is a definite trend towards Verizon's phones doing it, Don't get me wrong, there are all vendor phones that do this
Please resolve the post, OK?
Thanks!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Why does my ipod touch only give me sound and no video when connected to tv

whenever I connect my ipod touch to my flat screen to play a movies or watch a music video saved on the ipod touch ... I get the audio .... sometimes it will show the video but most times its does not ... simply put ... Why? and how do i fix?

cor-el,
Thank you for the help. I followed your instructions and it worked in Safe Mode. I went through my Add-ons and disabled them one at a time until I found the culprit.
Additional question: If I set up Sync and run it for my desktop and laptop, then turn my add-on back on, will it continue to interfere? Or only when it tries to re-sync? I'm asking because I love the add-on that causing the trouble and will have a hard time letting it go.
Thanks again for the help.
DB

Xfi-Xtreme music: Sound stops/ high tone when connecting or disconnecting cab

Hi,?For a

Try opening creative console program and changing from 5. to 4. and then?back to 5.. I found it helps in reseting the sound card. Just keep the volume down for now until you are sure this even fixes that problem. It scared the living crap out of me when it happened to me. I hope this helps you, ?I'm trying to find out if rolling back the driver might help too. My Card is?( X-fi extreme music ) Right when they first came out. My problems started after updating driver. ?

External sound doesn't play when connected to Mac Book Pro:

I plugged an external mp3 player into the audio input on my MB Pro, and in the sound system preferences it shows the input signal level responding but there is no sound coming out of the built in speakers on the Mac. Nothing is muted and the volumes are all up. I tried this on two different MB Pro's and the result is the same. The audio is coming in, but no sound is heard. Does anyone know how to get the sound to work? Thanks,
Matt

You're right. I just tried it & get the same as you described.
Here are 2 possible solutions:
http://www.ambrosiasw.com/utilities/wiretap/
http://www.rogueamoeba.com/freebies/

Ipod shuts off all sound when connected

ipod shuts off all sound on Mac Book when connected. Any ideas of why this is happening?

Perhaps you may get better response from the MacBook community forum
http://discussions.apple.com/community/notebooks/macbook
But in the Sound panel of the System Preferences, what is output source displayed? ( "Digital audio out"?)

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

My ipod classic has started making a mewing sound and all it does is scroll through the songs. It will not play except when connected to my computer. I tried resyncing and that did not work. How do I fix this problem?

My ipod classic has started making a mewling sound and all it does is scroll through the songs. It does not play on my Bose sound dock or through earbuds. It will play when connected to the computer...but that makes it hard to take it on a walk with me I thought it might be a synching problem so tried that--still doesn't work. How do I fix this problem with out restoring it to the factory setting? I do not want to lose all my music content as some of it I cannot replace easily. Please help with suggestions and advice. Thanks. Karen in GA

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

- Try resetting the car system if you can.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

Welcome to the Apple Community.
Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

When connected to lg monitor with hdmi cable i get no sound

when connected to lg monitor with hdmi cable i get no sound

The issue here is that HDMI cables, as the name indicates, carry audio signals to the monitor. Therefore if the monitor has no built in speakers then there will be no sound. If you have external speakers you can plug them into the audio out slot on the back of the monitor and the problem will be solved.
However, if the screen does have built in speakers you need to go Control Panel>Hardware and Sound>Manage Audio Devices and set either your headphone jack or the screen to be the default device. And then you ca pick which device the sound will play from. Either yourlaptop speakers or whateer speakers are plugged into the laptop or the Monitor and whatever speakers are plugged into the monitor

As there is no sound only picture when connecting my ipad, do I need to also use the audio cable from Apple TV to an older Philips TV?

I have just bought a black Apple TV and it works fine when connecting my iPad to a modern TV. However on an older Philips TV, there is no sound coming through. Do I need to use an audio cable from the optical digital audio port in addition to the HDMI cable? The TV's HDMI does not appear to support sound.

Thanks. However no luck with this TV so far. I've purchased a converter to give a digital audio signal from the optical digital audio output port. The TV has an input audio digital port, but I've had no success in getting sound so far.
Is there any setting in the Apple TV menu that may affect the signal. I've tried the setting for 16 bit signal, without any success.
Perhaps this Philips TV may just not be compatible with the new black Apple TV. I have talked at some length with Philips support desk, but they've offered nothing new.

No sound fro Jabra BT530 when connected to a call

Similar Messages

Maybe you are looking for