[Nokia 6300] Blinking 3 times at startup and then ...

Hello everybody,
Me and a friend of mine bought the 6300 handset and we both are completely satisfied with it.
BUT! Recently the phone of my friend went down. When he tries to turn it "On", the phone displays the Nokia logo for 1 second and then it goes blinking three times before turning off.
Well, I must admit that I'm happy that this problem is not happening to me ... but who knows? Maybe I'm next!!!!
I tried to connect the phone via USB but in vain, my computer and Nokia PC Suite are unable to detect it.
I'll be extremely happy if someone could help me to solve this issue.
Thanks in advance for your kind assistance.
Take care.

Remove the battery for 10 minutes then switch it on without the sim or memory cards inserted.
If it still fails to boot then there is nothing that you can try. Your only option is a nokia care point or a phone repair shop.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

HT201250 my time capsule is taking too much time indexing backup and then taking longer time to back up ( 207 days ) or longer !!! what shall i do ?

my time capsule is taking too much time indexing backup and then taking longer time to back up ( 207 days ) or longer !!! what shall i do ?

Try 10.7.5 supplemental update.
This update seems to have solved this problem for many.
Best.

My iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck.

HT1338 I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??

I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??

Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
System Preferences > Startup Disk
Select your Startup Disk

My iMac 24" freezes on startup and then works

Hi! My iMac has a startup problem: It freezes on startup around 5-10min and then works again. Sometime the desktop is loaded and sometime it only shows the blue screen. I can move the mouse cursor but the click doesn't work. I backup files with the time machine and reinstall the OS but the problem still exists. I run AHT (extend) and the result is OK, no Hardware problem. Anyone knows how to solve this problem? Thanks in advance. TW

More issues since I last posted:
It's running, very poorly, but am trying to upload an MP3 to soundcloud.com and the upload keeps freezing. It's nothing to do with my Internet connection either.
Quite honestly I think my iMac is on its last legs
I really need this running as smoothly as quickly as possible as my partner has recently been made redundant and needs the mac so she can look for jobs. This is very inconvenient :/

New imac displays horizontal grey bars and green pixels on startup and then freezes on a light grey screen

This is happening on a brand new 21 inch imac, all new specs released a few days ago.
This happened the first time I started up the imac straight out of the box. The screen displays alternating light and dark grey bars with green pixel specs all over it. The apple symbol and and loading symbol are visible too - but it then goes to a light grey screen and freezes.
If I manualy restart it will then startup normaly but will do this next time I startup the machine from a cold start.
Does anyone else have this issue. This is my first mac and it doesn't seem acceptable to me. I think I've been sent a dud!
Any help / opinions would be helpful. Cheers

I wouldn't try to solve this issue by troubleshooting a brand new machine. My personal policy is if an electronic device is malfunctioning out of the box, I return it for a replacement. We're talking about an expensive purchase and it should work, but even with stringent quality control a small number of products will fail out of the box. You didn't mention whether you ordered it online or purchased it at an Apple store. If you can, get a new machine at an Apple store and take advantage of the free setup. An Apple salesperson will start it in the store, so you'll know before leaving if it's good.

Thinkstation D20 Sleep Crash - Blinks for two seconds and then powers off entirely.

Hi there.
Here's the scoop. I have a Lenovo D20, 12 core, 64gb ram, etc. The box is perfectly fine. I've reinstalled windows and i'm missing a very important install file...
There was a Microsoft Hotfix to fix a Sleep crash when the system attempted to write sleep files to drives attached to the Marvell RAID controller, the symptom of this was the machine would go to sleep, the power light would blink normally and then 2 seconds later the system would power off completely and have to be cold booted. Needless to say windows was not happy with this before long.
By chance I came across an post on this board somwhere that said to download a Microsoft Hotfix for Windows 7 that fixed this EXACT issue, i did, and it did... I saved the file somewhere special, and then promptly forgot where i put it for future use... Needless to say, i'd really like to get my hands on it as my computer isn't happy with the shut downs. (I disabled sleep, but i pay for my power!).
Both of my D20's, (I'm an afficionado) have had this issue but i seem to have lost the patch. I have searched and searched and i just can't seem to find it!
HELP ME LENOVO COMMUNITY, YOURE MY ONLY HOPE!!!!!!
- BJ

was this the post you were thinking of?
http://forums.lenovo.com/t5/ThinkStation-Workstations/S30-Unexpected-Power-Off-Crash-at-Night/m-p/14...
hotfix: http://support.microsoft.com/kb/2459268
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Why would OSX suddenly startup and then zoom in without any keystroke?

Hi all,
all of a sudden following happens when I boot my mac mini. The desktop shows up normally and then after 1 second it zooms in to something like 90% (just so that the top bar vanishes). I can zoom out then and all is fine but I cannot get the mac to change this startup behaviour.
Any help how to change things back to 'normal' would be very much appreciated. Thanks Thomas
Mac Mini Dual Core Mac OS X (10.4.8) 2 GB Ram

Hello Thomas,
Three suggestions: First of all, as soon as you've zoomed out to the correct "unzoomed" appearance of the screen, log out immediately. Then try logging in again. That should fix it if there is a problem with a remembered preference.
If that doesn't resolve the situation, try opening the Universal Access control pane in System Preferences. Click on the Seeing tab, then on the Options… button in the Zoom pane. Make sure the "Minimum zoom" slider is all the way to the left (set to 1).
If that doesn't fix it, then go to ~/Library/Preferences (in your Home folder) and trash the com.apple.universalaccess.plist file. Then log out and back in again.
Keep us posted,
Archie

My macbook shows up the apple at startup and then the screen turn blue

As I said, when I turn on my macbook, the apple appears and then the screen turns blue and stays like that.

I have a Macbook (purchased in september 2008) in India. I got a blue screen error in 2010 when it was under the Apple care protection plan. I took it to the service centre and they replaces the Logic board to sort this error. After that the blue screen error appeared in 2011, 2012 and 2013. For the past 2 years, I have taken in the macbook atleast 5 times for the same error and the service centre had been re-formatting it and giving it back to me. But the problem kept re-curring. No proper diagnosis is being given at this apple authorised service centre.
I finally called up Apple tech support, who made me give the machine back to the same centre. Techsupport asked them to perform some check measures and finally decided that the OS being installed in my machine was the wrong one.
So the Service centre installed the original one from the CDs I had.
But this is no resolution as no one is willing to comment on this service measure nor is there any assurance that this will not happen again.
I have spent more than 15,000 rupees on the repairs for the past 2 years and am fed up of this.
I came to know from an Apple source that in the US, Apple has no "repair" policy and in the event of such a case, replaces the machine.
Can anyone here guide me on this please?
I will be grateful for any and every input.
The Apple authorised service centre is TRESOR SYSTEMS in Gurgaon, Haryana, India.
thanks a tonne
Shalini

Officejet 7000 network not recognized. Lights blink at printer connection and then go out

I plug in the network cable and the lights blink and then go out. The connection to the router is not established

Ok,
First, unplug both the printer and the router power for 30 seconds and check for any change,
if the same persists, try plugging the ethernet cable from your printer to your PC and check if the same behavior occours.
If so, than it seems like the printer eternet card is damaged, which will require service
If it is connecting with your PC, so the issue may be related with your router,
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have downloaded Firefox but it will not open. I have tried several times to install and then uninstall, but it still does not work.

We used to use Firefox..but for whatever reason it stopped opening. We uninstalled it and we found that the old version of Firefox would open but it would straight away update to the new version and then the problems would begin again and it would not open.

Using another browser, download the FULL installer from
'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}
Save the file. Then;
Using your file browser, open the '''Programs''' folder on your computer.
'''Windows:''' C:\Program Files
C:\Program Files (x86)
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Look for, and rename any Mozilla and Firefox folders by adding '''.old''' to them.
Now run the full installer.

Checking if Date/Time is Available (and then some more)

Okay, so I am stepping out of my as3 skill set here quite a ways and need some bookoo assistance (Flash 5.5). I am working on trying to come up with a way (an AIR desktop application, or web application) for the teachers on my campus to be able to assign students to a variety of detention types, dates/times with limited seating available. I want the teachers to be able to input the student data and select a date/time or even multiple dates/times, then have the program check to see if there are any available seats remaining for that date/time. If so, assign the student to that seat. If not, display the next available seat's date for that time slot with the option to assign student to that date or choose another.
I also want to be able to run a report that will tell me who is serving which detention, when (date/time) and in what room.
I would also like teachers to be able to "re-assign" a student if they needed to for whatever reason, thus freeing a seat in the previous slot and filling a seat in another.
I'm not quite sure where to start aside from the interface design (that I can easily handle). Does anyone know of a good tutorial (or a few) that could get me on my way to try to code all this?
Thanks!

except for making a calendar (http://active.tutsplus.com/tutorials/actionscript/understanding-date-making-a-calendar-in- as3/) there is only logic needed to create that app.

List of Values (dynamic parameter) times out once and then works.

Hello. First time posting here. I'm having a strange (yet very predictable) issue with Crystals Reports List of Values. The List of Values is used on a dynamic cascading prompt and is published to the BO XI R2 repository. The prompt/list works fine when using Crystal Reports thick client, but when using the Crystal Reports viewer from InfoView the following happens everytime:
1. Any Report that uses the Parameter/LOV is launched.
2. After about 1-2 minutes, the viewer returns a "Timeout" error message.
3. The report is launched a 2nd time.
4. The parameters/LOVs display (takes about 8 seconds) and the report runs fine.
Then anytime a report is run within a certain period of time it works ok. But if no one runs a report for an extended period of time (i'm not sure how long, but it's on the order of maybe 30 mins.. to an hour), then it starts all over again. In addition, if I restart the services/server this same thing will immediately occur. (time out once, but work after that for a period of time).
I initially did not schedule the LOV to get generated on the server and left it so that it's done in real-time when the report ran. But then when I ran into this error, I tried scheduling it every 10 minutes or so, but the error continues to happen.
I also restarted the server/etc to no avail.
I saw another post on here that was kind of similar and that suggested that starting the LOV services as a domain user (that had admin rights on the BO server) helped him. I tried this as well and restarted everything but that didn't fix my issue.
Any help would be greatly appreciated!
Scott

Just wanted to update this.
Because I use Business Objects OEM, I didn't have direct support with SAP/Business Objects. However, because of this issue (and other issues) we purchased Business Objects Edge 3.0.
After getting BOE 3 installed/configured, I migrated those reports and underlying Business Views over.
And guess what? The problem still occurred on the new platform.
I then created a support incident and the person that initially tried to help me couldn't figure out what was going on.
However, during that time, I did try re-creating the report using a newer version of Crystal (Crystal 2008) and the problem went away. (note, I didn't recreate the business views.. just the reports).
So bottom line:
I created all reports from scratch instead of using the reports that I migrated from BO XI R2/CR XI and no longer had the problem.
The techs never figured out the exact cause of the issue.
So far, my experience with their support has been the same on all incidents. They don't seem to be trained (at least at the 1st level) for actually using the debug/logs/etc to help quickly pinpoint/analyze issues. They do basically like I do (the end user) and smartly poke around and do trail/error. I have yet to get a support tech that knew the exact nature of my issue and could solve it without this kind of trial/error approach.

[Nokia 6300] Blinking 3 times at startup and then ...

Similar Messages

Maybe you are looking for