Non Cat Requisition gives error: "contract number - select a valid value"

Hi Guys
I wonder if you can help me please. After we've loaded these 3 patches:(7427952,6987692,6813613) when we create a NonCatalog Requisition and select a contract number with less than 4 characters, we get the following error: "contract number - select a valid value". But when we select a contract with more than 4 characters, it works fine. So in other words, it only takes contracts with 4 or more characters. Has anyone encountered this problem? Something has been changed by the patches, but we can't figure out what exactly. Any help would be appreciated.
Thanks

Hi,
Review the following note, it may be helpful.
Note: 756376.1 - Error: 'Select A Valid Value' When Adding a Section to a Contract Template
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=756376.1
Regards,
Hussein

Similar Messages

How to get the contract number selected on VA01.

Hello Experts,
While creating a sales order a contract number is selected.
ie to which contract this SO is being created.
We get a ALV list with list of contract number and we select one.
But no where this contract number is displayed.
I have a placed a input/output box on additional tab header leve of VA01.
I need to display the contract number selected by the user for that sales order on to that box.
and this should happened the moment the user copies the contract number from the ALV list
any functon exit or badi's which could be used to get the value.
right now iam using the include MV45AFZZ
I know the table getting used.
Thanks in advance.
Regards,
Ranjith

You can put your code into the MOVE_FIELD_TO_VBAP userexit in include MV45AFZZ. The contract information is stored on item level (VBAP) in fields WKTNR (contract number) and WKTPS (contract item). If you can have more than one contract in a sales order you should display that information on item level rather than header level, if you always reference one contract only per sales order header should be fine.
Hope that helps,
Michael

Serial Activation Error "Serial Number is not Valid for this Product"

I have Photshop CS5 Extended edition but when i try to activate the key it comes with the error "Serial Number is not valid for this product". The product has been activated two times before but the installation doesnt come with the error "Serial Number is already in use" or something similar. Any ideas on how to fix this?

Hi Dynamikzz,
As per the error message you received "Serial Number is not valid for this product", please follow the help document as below:
Error "The serial number is not valid for this product" | Creative Suite
In case you have received the error message "Serial Number is already in use", please follow the thread below as the activation count of Adobe CS5 applications is 2 :
Re: serial number issue
Regards,
Sheena

Select a valid value Error on LOV

Hi,
I am getting a Select a valid value error on LOV field on clicking Save button on Page, even when the selected value exists in the LOV list. Disable Valiodation property of LOV Field is set to false. I want the value to be validated.
This problem is occuring only when i try to select value for a blank LOV field. If I try to update an exiting value on the same field, no error turns up.
I am unable to find the cause of this unexpected behaviour of LOV.
I see the following error message in Diagnostics Log:
[62]:EVENT:[fnd.framework.webui.OAPageErrorHandler]:OAF LOG: Event : Check Errors, in: oracle.apps.fnd.framework.webui.OAPageErrorHandler: Exception: Select a valid value. ,In VO: null
Please help.
Thanks in advance.
-Shilpi Karan Anand
Edited by: 924887 on Dec 19, 2012 10:24 PM
Edited by: 924887 on Dec 19, 2012 10:25 PM

My issue has been resolved.I made following changes:
Set 'Use for Validation' property of Main LOV Map to No .
set 'Use for Validation' property of formValue LovMap to default.
Threads related to this issue:
https://forums.oracle.com/forums/profile.jspa?editMode=true&userID=924887
Error: Select a Valid Value
-SKA

LOV validation issue: "Select a valid value"

Hi,
I have a lov problem in oaf: "Select a valid value".
It is a common problem, but somehow I cannot figure it out.
LOV
- LovApplicationId (of type "formValue")
- LovApplicationShortName (of type "messageStyledText")
- LovApplicationName (of type "messageStyledText")
(based on combination of fnd_application and fnd_application_tl)
BASE PAGE
Two relevant items.
First one is "ApplicationId" of type "formValue" connected to view attribute "ApplicationId". (connected to EO attribute in VO)
Second one is "ApplicationName" of type "MessageLovInput" connected to view attribute "ApplicationName" (calculated in VO)
Two lovMappings.
First mapping:
LOV Region Item = LovApplicationName
Return Item = ApplicationName
Criteria Item = ApplicationName
Use for validation = no
Second mapping:
LOV Region Item = LovApplicationId
Return Item = ApplicationId
Criteria Item = <null>
Use for validation = yes
For example.
If I select "Inventory" in the LOV and click on the apply button in the base page, I am getting the error "Select a valid value".
If I select "Inventory Optimization" in the LOV and click on the apply button in base page, no error. And when I look in database the record is saved in my custom table with the correct application_id.
I have read many forum threads on this issue, but I cannot figure it out, what is wrong.
Please help me out.
Kind regards,
Cor

Hi Haroon,
This doesn't solve the problem.
It is true the exception I am getting doesn't show up anymore.
But the application_id isn't saved to the database.
First thing I would expect in this case, that the mappings are not set properly.
But if I choose for the value "Inventory Optimization", the application_id is saved to the database.
If I choose for the value "Inventory" the application_id is not saved to the database.
So it is possible the get rid of the error in the screen, but the underlying problem is still there...
I have checked some core pages, similar to the one I have.
So an UPDATE page (rectification: instead of CREATE).
I have set all attributes the same, but the problem still occurs in my case.
Very strange.
I would make no difference running the page from jdeveloper or put the files on the application server and run it from Oracle, would it?
It makes no sense. But...
Kind regards,
Cor

Error occured when selecting a filter value on the query

hi,
after the execution of the query on a multiprovider, i select a filter value for a particular characteristic then i get a pop up error message "Error reading the data of infoprovider ZTC_SUV12"
could anyone of you help me
Thanks and Regards,
Subha

Hello,
          Does the MultiProvider that contains an SAP RemoteCube , if so then try this depending on which system you are working.
BW 3.0B
           Implement Support Package 24 for 3.0B (BW3.0B patch 24 or SAPKW30B24 ) in your BW system. The Support Package is available ifnote 0723193 with the short text "SAPBWNews BW Support Package 3.0B Support Package 24", which describes this Support Package in greater detail, is released for customers.
BW 3.10 Content
           Implement Support Package 18 for 3.10 (BW 3.10 patch 18 or SAPKW31018) in your BW system. The Support Package is available oncenote 0723260 with the short text "SAPBWNews BW 3.1 Content Support Package 18", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Implement Support Package 09 for 3.5 (BW3.50 patch 09 or SAPKW35009</>) in your BW system. The Support Package is available oncenote 0763335 with the short text "SAPBWNews BW Support Package 09 NetWeaver'04 Stack 09", which describes this Support Package in more detail, has been released for customers.
hope it helps,

Error message while selecting a filter value

Hi Guys,
I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
Error msg:
The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
Function: RSDRS_READ_DATA of program SAPLRSDRS
Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
Form: DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
Its pretty urgent...I will award the highest points if this gets solved...
Thanks,
SAPconsultant.

Hi
It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range.
Hope it helps.
Lasya.

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
Chandu

Hi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri

Select a valid value ERROR in LOV

When i select a value which is not present in the LOV then i am getting this error.That is fine but the issue is that when i am trying to save this wrong value,then for first time i am getting this error.but When i am pressing the save button for the 2nd time,validation does not work and wrong value gets saved in the database.
I am using the LOV in the advanced table and and using a formvalue mapping for this functionality.
Why i am not getting error for the 2nd time?why the validation is failing?
Please help itsurgent and has already consumed a lot of time!

Hi Gyan Darpan,
Thanks for your response. I have not put any validation in the AM or VO.
Thanks
Satya

Quote Form: Repeatively Query gives Error:ORA-06502: PLSQL numeric or value

Hi,
I am trying to query the sales order form (in Order Management) with the order number.
Steps to Reporduce:
Without closing the sales order form, query the same/different order number repetively again and again (upto 30 times) in sales order form and i am getting the following error. It might be due to the form buffer error i think, but i want to know how to resolve this issue.
ORA-06502 : PLSQL : numeric or value error
I have suggested the workaround as closing the form after querying every 15 times, but the customer needs a permanent fix by querying continously without closing the form, they want to query the record. Please suggest how to resolve this issue.
Thanks

The errors comes when in variable or fields data is coming more than the maximum length it.
e.g
declare
vcheck varchar2(1) := 'ABC'; ---Errorplz share your code where you feel the problem might occurring usually POST-QUERY trigger.
Baig,
http://baigsorcl.blogspot.com

Query Designer: Error-msg: Please enter a valid value for charact 1FORMULA

Hello BI friends,
when I open a query in the Query Designer (or change query from BEx Analyzer) I get this message. There is no detail description for the message. After pressing the OK-button in the message I get an u201Demptyu201D Query Designer (to create a new or open a query).
The query contains some formulas, I know. I have checked the query by starting it via RSRT and debugging. There is only a warning (exception contains a non-numeric value).
But how can I check the formulas, exceptions or something else if the Query Designer doesnu2019t show the query definition?
Thanks in advance!

Hello Karen,
thanks for your answer.
Unfortunately I didn't mention yet that we have BI 7.0, but I'm using a 3.x query and 3.x QD. The query has not been transfered to 7.0 level (I hope it, since other colleagues work in the system too). How can I check the level (3.x / 7.0) of the query?
I have checked the table RSZRANGE, but I didn't find any row for the char. 1FORMULA, I have checked the fields IOBJNM, FACIOBJNM and ATTRINM. I also didn't find a row for RSRREPDIR-COMPUID = RSZRANGE-ELTUID. Did I search in a wrong way?
I have also checked the program COMPONENT_RESTORE, but I didn't start it for the IProv, comp type = REP and the special query, because I'm not sure what I'm doing there exactly (the program has no documentation).
Is it still the same way as you have described under these conditions?
Best wishes
Britta

Pop up message with Contract Number if Contract exists in ME21N in MM

Hi Experts ,
We have ECC6.04 system.We are NOT usning Pur. Requisition.
While creating PO by ME21N transaction code ,w.r.t. Contract if Contract is exist, then we need to find out the contract Number manually for each material in the req Pur. Org., which is very tedious task.
We can craete PO from Contract as a follow on document in ME33, but still 1st we need to find out the contrcat and then go to display of it and then craete Release Order (PO)...but it is not necessary that we will use single contract of same Vendor.
Currently , if contract is exist and we are craeting the PO w/o contract , then system gives Warning Message that '"... but does not gives me Contract Number & item No.
I'm exploring some enhancement, which will give me pop screen with the Contract Number & item No or system will directly insert the Contract Number and item in the item overview with all the detials picked up from it 9from source list)...while creating the PO in ME21N code.
Can anyone suggest, whether it is possible to achive the above by doing any custom devolopment or user exit..etc
Thanks
NAP

You can maintain the contract in source list. On creating purchase order you can go to environment-source list---there you will see the contract number, item number and validity. If the requirement is to see the contract number and item number can be done in this way without any enhancement.
REgards
Sangeeta

Message no. CZ160 - Select a valid release strategy - IS Retail

while assigning PR release strategy to site thru' "Determination of Release Strategy" under tcode WB02, i am getting following error message.
Select a valid release strategy
Message no. CZ160
Diagnosis
The release strategy 01 is not defined.
Procedure
List the permissible values using F4, and choose a valid release strategy.
FYI, i configured PR release strategy "01" with required config. requirements and checcked the same thru' simulation and it is working fine.

Hi,
Please follow the steps;
1. Create characteristics via tcode CT04
2. Create Class for class type 032. Via tcode CL02
3. Then go to SPRO -> MM -> Pur -> PR -> Release Procedure with Classification -> Set up procedure. create release group, rel obj, class 032.
Next, set up release codes followed by release indicator.
Then the release strategies.
4. go to tcode CL20N to assign the release group and release strategy to the class and class type.
5. SPRO -> MM -> Pur -> PR -> Release Procedure with Classification -> Set up procedure -> Check Release Strategies

ME59N error "Contract vendor X differs from vendor Y" message number 06 047

Hello,
has anyone of you idea what could be the reason for that we receive every now and then in automatic purchase order run in ME59N an error message for a purchase requsition "Contract vendor X differs from vendor Y" message number 06 047
Also the purchase requisition in error (red) is displayed in the list under vendor Y even though agreement is for vendor X. In purchasing request agreement and fixed vendor X are displayed correctly.
The error does not appear in ME59N if we only select this one single purchase requistion.
Hope for your help and thanks in advance for any contribution.
Br
TS
Message was edited by: Jürgen L

Hello,
Yes, it seems like source is uncertain but cannot understand the reason because 20280 is only vendor for the material. For this same vendor there are three contracts where this material is included but only the latest one 4600000805 is valid.
I checked contract partners, no reference to the 197790 vendor or neither is there in vendor masters for 20280
and 197790.
Is there any way to simulate how SAP selects the vendor in background? And as I said in the afternoon run there is no error anymore or if me59N run for this specific purchase requisition.
Br
TS

Non Cat Requisition gives error: "contract number - select a valid value"

Similar Messages

Maybe you are looking for