Non production usage of the MCOS deployment

Hi everyone,
As we all know, it's time for HANA SPS09.
So recently I have read a lot about MDC(multitenant database containers). And I learn that by comparing to other architectures.(include SCOS, MCOD, MCOS).
However, when referring to MCOS, multiple component one system, it says no support for production.
So why can't MCOS use for production?
I know Cons of MCOS are performance issue and additional sizing. So it's just due to this?
If so, why the performance of MCOS is bad?
Looking forward to your kind help.
Thanks in advance.
Geo

Hello Geoffrey,
As you know, for MCOS, contention for resources may negatively impact performance (you can't control CPU usage between different databases).
For MDC, the CPU and memory resouce can be controlled by MDC.
In my view, SAP considers to reach the biggest performance for HANA and no resource contention between databases for production HANA system with available TCO.
Regards,
Ning Tong

Similar Messages

About free non-production Directory Server

Hi, there,
We have downloaded the free SUN ONE Directory Server 5.2 from an ISV site. They claim that it supports up to 3000 entries.
We are looking in the Admin Console and could not find any indicator for how many entries we have already used and how many entries we still can create for free.
Does any one know how the non-production version monitor the number of entries and how could we tell when we need to buy more entries?
Thanks for the help,
citria

In the past there have not been special versions of the server that limit the number of entries -- you are expected to limit your use of the directory. You can find the number of entries by running a query at the base of the directory, search for objectclass=*, and counting the number of lines that start with "dn:". This is easy to do with ldapsearch from a unix command line.

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

How to record non productive time

dear expert:
for our analysis we are recording non productive time in the shop floor and respective cause against it to find an analysis for root cause. is there any way to do the same in SAP. please suggest.
best regards
javed iqbal

Dear ,
I am not sure wether there is a direct solution available.But I am sharing my views .
I think you should have Time Management System under SAP HCM and this will be based on the Work Centre Level Time booking against each order .
Generally , in our case , we have Shop Floor Order Print out (this is SAP generated form ) under Production Supervisour who collects the Actual Production Hr booking , Break time etc and posted through Shift Wise Confiramtion under ECC 6.0 Package Solution 3.0 and then every month , this Time hrs are compared with Time Management System report from HCM so that actual loss of hrs based on employee numbers , can be identifed and pictorial effience can be drawn.
Some reference : http://help.sap.com/erp2005_ehp_03/helpdata/en/46/f2a5ce3cd767f9e10000000a1553f7/frameset.htm
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0fa9a04-376a-2c10-c396-86d32ac80614
Needs discussion with HR and PP guys .
Regards
JH

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

How to deploy selected components on the production server with the same solution

Hello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib Khan

Hello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib Khan
Hi Sohaib, your another option is a good idea, only make sure to retract and remove the original from your farm, the add and install the new updated solution. And if you run into any error that says features already exist, you can use powershell, install-SPSolution
and -force to get the new solution deployed. http://tinyurl.com/q8erz72
Or, you could use Upgrade-SPSolution with a package that has same features from original, with the new artifacts. Although, if any of the original features are modified, I would recommend retract remove redeploy.
Stacy www.sharepointpapa.com

How do I disable all non-essential components in the CS6 installer

A new question in the spirit of http://forums.adobe.com/thread/548877 and http://forums.adobe.com/message/2778575, where I asked this question for CS4 and CS5 and eventually discovered how to do this (at least for CS4; CS5 was a mess...): How do I disable all the non-essential components in the Photoshop CS6 installer?
I already found the payloads/Media_db.db sqlite 3 database and wiped the DependencyData table. This goes a long way - unlike CS5, which was a maze of hidden xml configs and sqlite databases, for CS6 just wiping this single table will give the user full control over what the installer will put in the computer. With the dependencies wiped, we can now see all the stuff it's actually going to install:
Bridge (normal and x64) - 187 and 262 MB
CMaps (normal and x64) - 7.2 and 7.2 MB
CSXS Extensions - 1.3MB
CSXS Infrastructure - 6.8MB
Color - photoshop, EU, JA, NA - 1.5, 2.1, 3.0, 2.5MB
Video profiles - 4.7KB
Dynamic Link Media Server - 96MB
DynamicLink Support - 6.1MB
ExtendScript Toolkit - 19MB
Extension Manageer - 16MB
Fonts recommended (normal and x64) - 110 and 110MB (why are there x86 and x64 versions? more of an open question than one that really needs an answer, but this is not how fonts work. There are no separate x86 and x64 flavoured OpenType fonts)
Fonts required (normal and x64) - 123 and 123MB
Hunspell Linguistics Plugin (normal and x64) - 181 and 181MB
Linguistics (normal and x64) - 46 and 46MB
Mini Bridge (normal and x64) - 4.0MB
PDF Library Files (normal and x64) - 75 and 75MB
Photoshop (normal and x64) - 486 and 563MB
Photoshop Support - 9.4MB
Player for Embedding 3.3 (normal and x64) - 21 and 26MB
Switchboard 2.0 - 1.1MB
Type Support (normal and x64) - 6 and 6MB
Winsoft Linguistics Plugin (normal and x64) - 8.2 and 8.5MB
XMP Panels - 4.9MB
ColorCommonSetCMYK - 13MB
ColorCommonSetRGB - 8.6KB
Camera Profiles Installer - 285MB
MSVC++2005 redist. (normal and x64) - 11 and 11MB
MSVC++2008 redist. (normal and x64) - 11 and 11MB
MSVC++2010 redist. (normal and x64) - 11 and 11MB
MSVC80_CRT (normal and x64) - 0.0 and 0.0KB
PDF Settings - 2.4MB
Camera Raw 7 (normal and x64) - 22 and 24MB
Suite Shared Configuration - 3.2MB
Some of these things we really want installed (Photoshop, CMaps, XMP panels, Type Support and required fonts and color profiles are pretty much the minimal set required for a functional Photoshop installation), but some of these things really have no right to be silentedly installed. There's a good gigabyte of nonsense that someone who just wants Photoshop has no need for. Denying them the option to unselect these things during installation is a bit evil (whatever happened to the 'advanced' or 'custom' installation option? That was a good option).
That said, there's still something funky going on - unselecting all components indicates that the installation will required 0.0KB on disk. However, selecting Photoshop CS6 x64, which indicates its size is 563MB, results in an installation that requires 677MB on disk. Similar things happen for other components; CMaps is 7.2MB, but when you select it, it suddenly requires 121MB on disk.
Much last last time, I fully appreciate the install team's choices in making sure the installer will always work as long as people don't tamper with it, but I'm not one of those people - I do tamper with it, because I want to control exactly what lands on my disk. So: how do I find out what these secret things are that are not listed after wiping the dependency data so that I can explicitly pick individual components? Which additional steps are required to reveal the hidden dependencies that will apparently still be installed, or aren't factored into the size indication for the various components? And finally, how do I make the installer NOT determine that "this is not a genuine installer, you may have a counterfeit product" =)
I know it's been altered; I modified it, because I think your install process is trying to force stuff onto my computer that I never asked for, nor will ever use (I know they're quality products, they just have no right to exist on my computers. If I had the choice to say no, I'd acknowledge them as quality products instead).
- Mike Kamermans
nihongoresources.com
NB: if Eric Wilde ends up replying to this post: I still remember your willingness to help figure this out for CS5, two years ago. Thank you again for that.

I can see why you wouldn't want to release information that lets people set up arbitrary installers, but that's why I mostly wanted those two specific hashes. The installer team can just generate them without ever saying how, and we will only be able to use them to validate the installer for the modification that lets you pick components. This should in no way interfere with the desire to prevent dangerous installers making it into the wild; in fact, it kind of guarantees that's impossible.
I know you can't guarantee it'll work or test it, and that's fine. Past experience has shown that CS3, CS4 and CS5 work fine with updates (and most updates don't apply to Photoshop, they apply to the additional components that I traditionally don't install), so I'm pretty sure it'll work fine with CS6 too, although of course it could go wrong in which case I can always fall back to a normal install.
Would you be willing to ask the install team whether they could generate just these two numbers, based on the single SQL command run on Media_db.db from the main payload directory? I can fully understand not wanting to give the "here is how you generate the hashes" information, but generating two specific numbers that don't work for anything but this specific query should be just as safe as the various hashes we can already see for the other Media_db.db files in the various payload directories (so they wouldn't reveal anything not already known about how to reverse engineer the hashing algorithm). It'd help tech-savvy customers quite a bit without playing into the hands of criminally minded jerks (I actually had the pleasure of running into a duped CS3 Extended disc several years ago! I had ordered CS3 for personal use, and mysteriously received a CS3 extended version with a volume licensing key in what looked like an official normal CS3 box. Needless to say, authorities and Adobe were notified).
<<I think the right answer to this issue is to simply remove from the products those items that are not required to execute the product. That's actually something we're aggressively pursuing this summer so that the product size reduces in future releases, particularly for PS.>>
It's not possible to take components out of the payloads directory without the installer complaining that errors have occurred. It really wants all those files there when it starts =(
<<Have you investigated using AAMEE? I don't think that will get rid of all the "extraneous" pieces; but, it does provide some flexibility in creating an install package that can then be pushed out through normal deployment tools (e.g. SCCM).>>
I did, but unfortunately AAMEE requires the use of a volume license key, which I don't have. We only have individual products keys for the machines that will get Photoshop CS6.
- Mike

Feasibility for a new production system in the same environment

Dear friends,
Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
Your suggestions are welcomed.
Many thanks,
SUJIT

Hi Sujit,
The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements. If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware. For ease of management and usage, then having one system is preferred. You can then upgrade your network to cope with the increased load and hardware as required.
Hope this helps,
Graham

Usage tracking problem : not started due to non-existent Usage Tracking tab

Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.

Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either.

After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

After installing Adobe Premiere Pro product CS6 in the program is not active
PlayBack button setting when creating sequence.
Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

Hi,
Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
Since you chose to create a DV sequence, you cannot change those settings.
Do you have DV NTSC clips? If so, these are the correct settings.
If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
Once you drag a non-DV clip into the DV sequence, it's OK.
You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
Click "Change Sequence Settings" in the dialog box.
I hope that helps.
Thanks,
Kevin

How to get sideload product key in order to deploy windows store app into Windows 8 pro and windows RT

From where can i get the Windows 8 sideload product key and the process how to get it .please explain in detail .

I was able to resolve my issue once I worked with Microsoft Professional Services. Here are the steps needed to deploy a Windows 8 Store app for anyone else looking for help on this.
Create your app package in Visual Studio
    https://technet.microsoft.com/en-us/windows/jj874388.aspx
Create an app certificate using PowerShell as administrator, here is one way to do it.
    https://msdn.microsoft.com/en-us/library/windows/desktop/jj835832%28v=vs.85%29.aspx
Install the app on the device
    https://msdn.microsoft.com/en-us/library/windows/desktop/jj835832%28v=vs.85%29.aspx
Ensure Device has the correct GP settings
    http://blogs.technet.com/b/scd-odtsp/archive/2012/09/27/windows-8-sideloading-requirements.aspx
Install the application on the device
    Refer to Sideload the app for user section
    https://technet.microsoft.com/en-us/windows/jj874388.aspx
* If you run your app now you should get an error, this is because you have not installed a Sideloading Key
And the missing piece of the puzzle What is a Sideload key and how can I get one?
* Documentation on this is confusing so here is what I needed to know and found out
    Sideload key is a product key that is needed to be added to the device so that it can use Windows 8 apps that are not from the Store
    It is not a requirement to have the machine joined to the domain or have Windows Enterprise installed on it. In my case my target was a Windows 8.0 Pro tablet.
    You do not need Windows 8.1 to use sideloading it will work on Windows 8.0 as well
    You can purchase a key from a Third Party Distributor but you will need to know what to ask for
    Ask for a Windows 8 Sideloading Key, Sometimes referred to as a Windows 8 Embedded Sideloading product key
    They cost about $100.00 a pop but they sell them as a Volume License so the minimum you can by is 5.
    However in my case it turned out that my company had an Enterprise Sideloading License, I just needed to know who to ask and what to ask for.
    Once you get your xxxxx-xxxxx- Slideloading key from the distributor here are the steps to installing it on the device (Section 2 Step 3)
    http://blogs.msdn.com/b/micham/archive/2014/05/30/sideloading-store-apps-to-windows-8-1-devices.aspx
Once I installed that my application worked.

Setting client role in non-production systems

In our QA test systems of R/3 and BW, the client role in SCC4 was set to 'Production'. The reason I was given is that by setting the client role to 'Production', will enable some settings in FI such as period closing,and customizing settings remain open without transportable requests. I totally disagree with this. I worked on numerous projects, but this is first time I am hearing this. I always set client role to Test in non-production systems, without any problems. Do any one have any idea about this?
Thanks
Santosh

SAP have a concept of "current settings". These include things like exchange rates and other items which really appear to be configuration settings. In a non-modifiable system these cannot be changed because the transport management system tries to get involved. If the client is set to productive, this restriction is overridden.
I would always suggest that the QA system should be set to productive and non-modifiable to ensure that the behaviour of the transactions affecting such objects can be tested in a production-like environment. If you need to have your QA system open for any sort of changes you are exposed to having changes introduced in QA to leading to the impression that new/modified functionality or config works but when the transport takes the unmodified version to production you'll be in trouble.

Monitoring availability - Different action for Production/Non-production

Hi there,
We've configured availability monitoring on our central monitoring system using CCMSPING agent. Everything is configured correctly and working nicely. However, I have a problem how to take a different action depending on whether alert was raised for production or non-production system.
I've configured an autoreaction method for MTE class Availability_SysPercent_ABAP. This class is not dependent on the remote system. It is the same for all monitored systems, which is the reason for my problems.
If I assign an autoreaction method to the MTE class, the same method will be called if there is an alert for any of the monitored systems. The autoreaction method automatically logs a new ticket in our call handling system. Unfortunately the call handling system can't parse the email to find out which system was the alert generated for. It can only raise a ticket based on some keywords in the content of the email.
The way we configure CCMS for everything (apart from availability) is that we assign different autoreaction methods to different MTE classes. It can't be done in this case as there is only one MTE class. We can't assign different autoreaction method to individual MT elements as this is lost (see note 660126). One of the options could be to change CCMSPING to generate a different MTE class for production and non-production systems, but I haven't found a way of doing it. Another option was to have 2 CCMSPINGs, but they both use the same MTE class.
Has anyone got any experience with this or can suggest anything we can try?
Thanks,
Rob

Hi,
Its still available.
You can still assign different method to nodes.
Its working fine , we are using.
You can assign different method to different systems in RZ20 itself.
Regards,

Procedure to make a system Non-Productive

Hello All,
I want to execute the program ZZ_DELETE_CRMPRLS in the R/3 system to delete the entry in the table CRMPRLS since the LOGSYS and LSGUID are wrong in this table and my material replication is failing. Making the system non-productive is pre-requisite for executing this program.
Can you let me know what the procedure to make a system non-productive? I want to execute this program in my quality system. Tried locking out all the dialog users but it is not working.
With Regards
Sathya

I think you have the setting in Scc4 to make client role as production or non production like test,development.
Run Scc4 select the perticular client and then goto change mode and then change the client role.
Thanks
Rishi Abrol

Work flow routing - Non Production

Hi Experts,
Only production workflow notifications should be sent out to employees. Currently workflow notifications are still being sent from the various other non-production clients and causing issues. The business/HCM needs these shut off in the non-prod clients or rerouted to "dump", so that they are not mixed up with LIVE data. Work flows need to be configure.
Advice me .
Thanks in advance
Tanuja.

hi rob,
my user is having SAP_ALL and SAP_NEW authorisations . ALL except (Classify Decision Task as General )and (Document Generation/Form Integration) are marked as green. these two are still in red only whether i need to transport these two from development
thanks & regards
sreehari p

Non production usage of the MCOS deployment

Similar Messages

Maybe you are looking for