"NOT EXISTS" implementation?

Hello,
I have 2 tables in a master->child type of relationship. I want to do a query in BI Answers to list the master records that have a count(child) = 0. Can someone point me in the right direction? In SQL I would normally use the HAVING Count() syntax, but can't seem to get the correct relationship/outer join/cardinality setup for this.
Thanks,
Eric

Hi Eric
In that case join both the table using Complex join and joining relation will be Either Left outer join or Right outer join. I dont know exactly about ther join but you have to use these join only to show the result.
Thanks
Siddhartha P

Similar Messages

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist

Hi all,
We are trying to implement HR renewal.After installation we got the landing page for ESS and MSS. But when trying to expand chips I am getting below error message
'Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist' in the /iwfnd/error_log transaction.
The chips are are still blank.What could be the issue? Any one has an idea?
Regards,
Jay

Hello,
Are you using a Gateway Hub deployment? Check the setting in the "Assign SAP system Aliases to ODATA Services", and see if the services catalog service to the hub server which has LOCAL as alias and checked the default value.
If so deactivate Default System fiag then test again.
You can check this in SPRO:
Regards,
David

Country implementation 40 does not exist for category IT and type 2001

Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
Bala

After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future.

Enhancement object does not exist for enhancement implementation

Hi Experts,
When i tried activating my implementation, i got the sujected error. any kind of inputs will be very helpful. This is an existing implementation and was last changed in October, I just wanted to added few more changes to that.
Here is the long description of the problem.
Diagnosis
An enhancement implementation xxxxxxxxx was delivered to customers, but the enhanced object YYYYYYYYYY does not exist in the system. The corresponding record does not exist in Table .
This can have different reasons:
The enhanced program object YYYYYYYYYY belongs to a different software component than the enhancement and this software component was not relevant for delivery.
An error occurred during system setup so that the enhanced object YYYYYYYYYY was not imported.
The enhancement implementation xxxxxxxxx is obsolete and the enhanced object YYYYYYYYYY has meanwhile been deleted or copied. As a result, there could be enhancement implementations in the system that have not been adjusted or that have incurred an error during deletion or renaming.
Procedure
Contact your system administrator and try to clarify the problem - if necessary, with SAP's help.

Hi Reddy,
1) Please go through the enhance implementation of that. 2) Check whether any thing activation is missing.3) Check the implementation class. It is better to understand if you explain for which badi you are using.
Regards,
Madhu.

Implementation class ZCL_*****************does not exist

Hi ,
I implemented BADI - ME_PROCESS_PO_CUST ,tested in development system,worked well.
When I moved it to Test system I am geting the below error.Is there any thing I need to do while transporting the implementation..
Implementation class ZCL_IM_ME_PROCESS does not exist
Message no. ENHANCEMENT363.
Can any body temm me what sould I do now.
Regards
Rammohan.

Hi,
Are you sure the you have transported the class ZCL_IM_ME_PROCESS ?
Check in SE24 --> Goto --> Object Directory entry --> Lock overview.
May be the class was saved in a different request and you did not transport it
Regards

Method Implementation does not exist in the SWO1.

Hi,
If the definition of the method in the business object does not exist in the Business Object, where all the places the system will try to find & execute the code. For ex: we have a method(custom method) in the YBUSXXXX business object. But when we double click the method , we get the screen where we have 3 tabs, General/Result Type/ABAP tabs. In the ABAP tab, the radio button 'Other' was selected. I did not find the code for this method. If the code does not fins here, where system will find dynamically & excute that code. & how can I see that code? Pls help.
Thanks,
Pandu
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Oct 5, 2011 9:43 AM

See the below link
The work book does not exist in the document store
Regs
Gopi
Assign points if it is useful

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Unable to login: SAP System Message: Dynpro does not exist

Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      79
M sid        Q60
M systemid   324 (IBM iSeries with OS400)
M relno      7000
M patchlevel 0
M patchno    172
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c   1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected               = TRUE
C con_hdl                 = 0
C db_handle               = 1
C dbhost                  = USALSAPU
C rdbname                 =
C dblib                   = R3Q60DATA
C r3sysle_changed         = TRUE
C query_compl_reval       = O
C dbconnecttype           = L
C user                    = Q6079
C qaqqinilib              = Default (QUSRSYS)
C dbjobname               = WP00
C dbjobuser               = Q6079
C dbjobno                 = 197762
C rmtexelib               = KRNQ60700
C parallel_alter_tables   = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = Q60
C     Character encoding          = UNICODE
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = USALSAPU
C     dbhost                      = USALSAPU
C     rdbname                     =
C     dbname                      = Q60USALSAPU
C     dblib                       = R3Q60DATA
C     application server          = DVEBMGS79
C     Connect type                = LOCAL
C     pid                         = 6396
C     wpjobname                   = WP00
C     wpjobuser                   = Q6079
C     wpjobno                     = 197762
C     DB2/400 vers. appl. server = PASE 1
C     DB2/400 vers. DB server     = V6R1
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = OFF
C     allow_cancel                = Try (Unspecified)
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     nte_list_size               = 10
C     dbsl_alternate_package      = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA          (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA          (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM               (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM          (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array)   (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area)    (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array)   (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area)    (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array)   (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area)    (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array)   (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area)    (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL       started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP      started with length 35840000   bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF      started with length 80000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA        started with length 40000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR   (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B   max_blocking_factor = 20, max_in_blocking_factor      = 40,
B   min_blocking_factor = 10, min_in_blocking_factor      = 10,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   1, prefer_in_itab_opt          =   1,
B   convert AVG         =   1, alias table FUPD            =   1,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.172.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [17]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62379446
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c    8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62382527
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c    8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62392457
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c    8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER     /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c   1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [             0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST                                .
A Source SAPMSYST                                 Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380                                .
A Source                                          Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478

Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

ENT- 06955 Cube Name does not exist in schema !!!

Hi , I decided to implement a small scale warehouse just to get a feel of OWB anyways i retrieved the data from a SQL Server database and populated my staging database i then implemented a cube and called it sales it so happens that upon creating a cube it automatically creates a measures "sales_1" tables in the tables sections. Anyways so i did the mapping and successfully the table got populated. I.e The table contained 2 aggregated (summed) measures with the three dimensions specified in the cube . So i guess the cube table got populated. This is the cube rite ?? I mean the table is the cube rite with both the measures and all the dimensions in one table ?? Furthermore so will each cube have a distinct table ?? What bothers me is when i double click on the cube in OWB i get the error the cube must be deployed... So i deploy the cube and it says successfully deployed. After that when i right click on the cube and select view data a error message comes up saying the workspace does not have a sales database (but it does) ?? Can we actually view the data in a cube through OWB other than viewing the data in the sales_1 table generated by the cube? ?? Could anyone know what i am doing wrong or what may be the problem..
The error message that i am getting is "Cube name sales does not exist in OLAP schema ACME_DWH. Please deploy the cube SALES on to the olap schema ACME_DWH"

Hi,
When you create a dimension or a cube with ROLAP implementation, their "Deployment Option" will be set to "Deploy Data Object only" by default. If you want to browse data in dimension/cube using "Data Viewer", you have to right click the dimension/cube, click "Configurate..." in the popup menu, find "Deployment Option" property in Configuration editor, set it to "Deploy All" or "Deploy to Catalog only", then deploy and run it again.
However there is another way to check dimension/cube data if you selected "Deploy Data Object only". You can find dimension/cube implement table, right click on that table, then click "Data...".
Cheers,
Dawei
Edited by: dawsun on May 19, 2010 11:53 PM

Object class name does not exist in IDM

Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
Nitesh

Hi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu.

Tutorial - Create a blog reader Store app (C++) - Error:The name does not exist in the namespace!

I'm trying to create my first store app based on msdn's sample.
Link to the sample:
https://msdn.microsoft.com/pl-PL/library/windows/apps/hh465045.aspx
I have problem doing last step (number 3) of part 3.
In code below in file App.xaml the compiler get the error "The name 'FeedDataSource' does not exist in the namespace 'using:SimpleBlogReader'"
<Application
x:Class="SimpleBlogReader.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:SimpleBlogReader">
<Application.Resources>
<local:FeedDataSource x:Key="feedDataSource"/>
</Application.Resources>
</Application>
In the file App.xaml.h I added line #include "FeedData.h", and FeedData.h looks like:
//feeddata.h
#pragma once
#include "pch.h"
namespace SimpleBlogReader
namespace WFC = Windows::Foundation::Collections;
namespace WF = Windows::Foundation;
namespace WUIXD = Windows::UI::Xaml::Documents;
namespace WWS = Windows::Web::Syndication;
/// <summary>
/// A FeedDataSource represents a collection of FeedData objects
/// and provides the methods to retrieve the stores URLs and download
/// the source data from which FeedData and FeedItem objects are constructed.
/// This class is instantiated at startup by this declaration in the
/// ResourceDictionary in app.xaml: <local:FeedDataSource x:Key="feedDataSource" />
/// </summary>
[Windows::UI::Xaml::Data::Bindable]
public ref class FeedDataSource sealed
private:
Platform::Collections::Vector<FeedData^>^ m_feeds;
FeedData^ GetFeedData(Platform::String^ feedUri, WWS::SyndicationFeed^ feed);
void DeleteBadFeedHandler(Windows::UI::Popups::UICommand^ command);
public:
FeedDataSource();
property Windows::Foundation::Collections::IObservableVector<FeedData^>^ Feeds
Windows::Foundation::Collections::IObservableVector<FeedData^>^ get()
return this->m_feeds;
property Platform::String^ CurrentFeedUri;
void InitDataSource();
void RetrieveFeedAndInitData(Platform::String^ url, WWS::SyndicationClient^ client);
How to solve this problem?

You're testing this too early. You haven't yet finished writing code that your current code depends on. Feeddata.cpp won't build, so you can't use the data object that hasn't yet been created.
In particular, feeddata.cpp doesn't build since it has many references to items which get added in later steps.
For example, TextHelper is added in part 5 and App::RemoveFeed is added in part 10.
You'll need to either wait until you've implemented those before you test or comment out the calls to the unimplemented features until they're done. TextHelper looks like it adds quite a bit and you're almost there, but you can probably get away with commenting
out the calls to RemoveFeed and GetTitlesFromUri for now.

Package does not exist error!

Hello, I'm having trouble getting an application which uses a package to compile. This is from "Teach yourself Java in 21 day".
The files are:-
Item.java
package ecommerce;
import java.util.*;
public class Item implements Comparable {
     private String id;
     private String name;
     private double retail;
     private int quantity;
     private double price;
     Item(String idIn, String nameIn, String retailIn, String quanIn)
          id = idIn;
          name = nameIn;
          retail = Double.parseDouble(retailIn);
          quantity = Integer.parseInt(quanIn);
          if(quantity > 400)
               price = retail * .5D;
          else if (quantity > 200)
               price = retail * .6D;
          else
               price = retail * .7D;
          price = Math.floor( price * 100 + .5) / 100;
     public int compareTo(Object obj)
          Item temp = (Item)obj;
          if (this.price < temp.price)
               return 1;
          else if (this.price > temp.price)
               return -1;
          return 0;
     public String getId()
          return id;
     public String getName()
          return name;
     public double getRetail()
          return retail;
     public int getQuantity()
          return quantity;
     public double getPrice()
          return price;
Storefront.java
package ecommerce;
import java.util.*;
public class Storefront {
     private LinkedList catalog = new LinkedList();
     public void addItem(String id, String name, String price, String quant)
          Item it = new Item(id, name, price, quant);
          catalog.add(it);
     public Item getItem(int i)
          return (Item)catalog.get(i);
     public int getSize()
          return catalog.size();
     public void sort()
          Collections.sort(catalog);
and the main class - Giftshop.Java
import ecommerce.*;
public class GiftShop{
     public static void main(String[] arguments){
          Storefront store = new Storefront();
          store.addItem("C01", "MUG", "9.99", "150");
          store.addItem("C02", "LG MUG", "12.99", "82");
          store.addItem("C03", "MOUSEPAD", "10.49", "800");
          store.addItem("D01", "T SHIRT", "16.99", "90");
          store.sort();
          for(int i = 0; i < store.getSize(); i++) {
               Item show = (Item)store.getItem(i);
               System.out.println("\nItem ID: " + show.getId() +
                         "\nName: " + show.getName() +
                         "\nRetail Price: $" + show.getRetail() +
                         "\nPrice: $" + show.getPrice() +
                         "\nQuantity: " + show.getQuantity());
Item.java and Storefront.java are stored in:-
C:\Program Files\Java\jdk1.5.0_12\package\ecommerce
GiftShop.java is stored in:-
C:\J21work
My classpath is set to:-
C:\J21work
CLASSPATH=C:\Program Files\Java\jdk1.5.0_12\lib\tools.jar;C:\J21Work\;C:\J21Work\package\ecommerce\
When I attempt to compile GiftShop.Java I get the following error message:-
C:\J21work>javac GiftShop.java
GiftShop.java:1: package ecommerce does not exist
import ecommerce.*;
^
GiftShop.java:5: cannot access Storefront
bad class file: C:\J21Work\package\ecommerce\Storefront.class
class file contains wrong class: ecommerce.Storefront
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
Storefront store = new Storefront();
^
2 errors
Thanks for taking the time to read this question.
Edited by: lister27 on Sep 16, 2007 7:57 AM

Hi,
I have the same problem with the same code. I am trying to find what is wrong with my classpath.
The class files of Item and Storefront are in C:\dev\java\org\cadenhead\ecommerce
The GiftShop.java is in C:\dev\java\
My classpath is .;C:\Program Files\Java\jdk1.6.0_03\lib\tools.jar;C:\dev\java\org\cadenhead\ecommerce;C:\dev\java;C:\J21work
I appreciate any help.

The name "XYZ" does not exist in the namespace

I was getting error "The name “XYZ” does not exist in the namespace " at here
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>
How to solve?
namespace DictionaryApp.Model
public class VisiableConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object Convert(
object value,
Type targetType,
object parameter,
CultureInfo culture)
bool visibility = (bool)value;
return visibility ? Visibility.Visible : Visibility.Collapsed;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object ConvertBack(
object value,
Type targetType,
object parameter,
CultureInfo culture)
Visibility visibility = (Visibility)value;
return (visibility == Visibility.Visible);
Next, add the converter in the UserControl's resources. In m
y simple project, I had to create this section - but hopefully you're already using this in your real apps!
You may also need to add an xmlns attribute in page.xaml for your project's namespace.
x:Class="DictionaryApp.PageDictionary"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:DictionaryApp"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:ms="using:DictionaryApp.Model"
mc:Ignorable="d">
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>

I think the not implemented exceptions could be causing the issue. I would implement this functions also
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
and
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();

RSPC Variant does not exist - Could not find or load print parameters

We are on BI 7.0 (support pack SAPKW70017). We recently freshed test system from production.   After the refresh, we have problems opening all the process chains.
1. When I go to RSPC to open a process chain, I get many messages like this:
Variant &0000000067180 does not exist (there are different variant numbers)
Message no. DB612
Diagnosis
You selected variant &0000000067180 for program RSPROCESS.
This variant does not exist.
2. When I go to SM21 to check the system log, it displays many entries like below:
EJ F Could not find or load print parameters for step 1, job BI_PROCESS_TRIGGER/09134500
Documentation for system log message EJ F :
An error occurred during loading of the print parameters for a
background job step.
The print parameter record may have been deleted even though there was
a still a step that needed that data. This is an error as the
reorganization of the print parameters should prevent this from
happening.
To fix the problem, edit the step and save it, copy the job, or
schedule a new job. The print parameters will be regenerated in all
these cases.
3. I applied the OSS note 1169659 - Correction: Process variants not entered by BDLS.   The Basis rerun BDLS. But it did not fix the problem.
Would appreciate if someone could provide any help.
Thank you.

Hi Rebecca.
1) Please verify if exist process types called 'unknown job'. If exist: delete process types called 'unknown job' in your process chain. To do that please remove the chain from scheduling (menu bar > process chain > remove from schedule), afterwards switch the detail view on (menu bar > view) > right mouse click on the process type "unknown job" > displaying scheduled jobs > delete that job. After deletion of the 'unknown jobs' activate and schedule your process chain again.
2) After the removal of the 'unknown jobs' please check if the error messages with the missing variants pop up when calling your process chain disappears. If not, please implement and execute the attached report Z_FIND_JOBS_WITHOUT_VARIANT which deletes the jobs without variants.
I have already attached report as Report Z_FIND_JOBS_WITHOUT_VARIANT, you can download and create the report accordingly.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
REPORT Z_FIND_JOBS_WITHOUT_VARIANT.
data: l_t_job type table of tbtcp with header line,
      l_s_varsel    TYPE rsvar,
      l_t_variant   TYPE TABLE OF rsparams.
parameters: delete type rs_bool.
select * from tbtcp as job into table l_t_job
                    where progname = 'RSPROCESS'
                    and   exists ( select * from tbtco
                          where jobname = job~jobname
                          and   jobcount = job~jobcount
                          and   status = 'S' ).
loop at l_t_job.
l_s_varsel-report = l_t_job-progname.
l_s_varsel-variant = l_t_job-variant.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report               = l_s_varsel-report
      variant              = l_s_varsel-variant
      execute_direct       = 'X'
    TABLES
      valutab              = l_t_variant
    EXCEPTIONS
      variant_non_existent = 1
      variant_obsolete     = 2
      OTHERS               = 3.
if sy-subrc <> 0.
    write: / l_t_job-jobname, l_t_job-jobcount.
    if delete = 'X'.
      CALL FUNCTION 'BP_JOB_DELETE'
        EXPORTING
          JOBCOUNT = l_t_job-jobcount
          JOBNAME = l_t_job-jobname
        EXCEPTIONS
          OTHERS   = 1.
      IF SY-SUBRC <> 0.
        write 'not deleted'.
      else.
        write 'successfully deleted'.
      ENDIF.
    endif.
endif.
endloop.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I hope I can be helpful.
Thanks,
Walter Oliveira.

"NOT EXISTS" implementation?

Similar Messages

Maybe you are looking for