Nothing but issues!
For the first few months my Incredible was well, incredible, but i had the same issues as everyone else with the low on space messages. Whatever that can be and has been fixed. My phone freezes all the time. My phone reboots ALL the time. I had to factory reset my phone because i couldnt get into market place and thats all the verizon help desk could figure out. back up assistant didnt "backup" all my contacts which ****** me off and i almost switched providers then. Today my phone randomly rebooted, didnt think much of it because as i stated earlier this happens all the time. about an hour later i look at my phone and it factory rest ITSELF!!!! contacts gone, pictures that werent on SD card gone, aps not on SD card gone. Everything is gone off my phone, even the favorites widget that i LOVED. i am so unbelievably disappointed with this phone. The last thing i want to do, for the 3rd time, is go through and put pictures back on peoples contacts... not to mention i cant even do favorites without downloading an ap for that. UGH
The main problem I have with the phone is the 3G signal is unacceptable for a phone marketed on the fact that its 3G. I have a Nokia N95 on the same network and the 3G on the N95 is full bars but the iphone only has one or two dropping up and down al the time. I know i'm not alone on this one, sure ya turn off the 3G but whats the point when its main function is its 3G service. My partner got a iphone too he has the same problems coincidience ? I don't think so.
Apple really really need to get there act together on this one , clearly the firmware/antenna is not up to scratch! Version 2.0.1 does not really address this issue , well not for me anyway.
Also minor nigal , why have an alarm clock if the alarm doesn't work when the phone is off ! There is no point having a great smooth operating phone if all the functions do not work , even the mior ones shows a bit of neglect on aples part!!
There whine over for today anyway lol
Similar Messages
-
Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Power surge now nothing but issues.
So I had a power surge (no protector...I know dumb) and my pc restarted. When it came back on it loads the bios. If I leave the bios, it beeps once long and then 2 short and goes to black screen. Everything I read says that it means my video card is shot. Here is what I am running:
MSI FM2-A75MA-P33
AMD A10 680K
So having said that I am running integrated graphics. Does this mean my processor is shot or did I fry something on the mobo? Any help is greatly appreciated. Thanks.ok it is sounding like the surge maybe has killed the CPU or fried its memory controller!
one lastage thing to try is a CMOS clear >>Clear CMOS Guide<< remove the power cord and do a clear and leave the battery out for 5 mins and put it back in and see if it works then! -
Wow, nothing but problems with BB Link after update
Since the last update to BB Link which included Outlook one-way sync of calendar and contacts, have had nothing but issues.
Link won't perform the Outlook sync. Says the phone is disconnected. It isn't!
Unless I have USB mass storage on the USB connection to computer won't recognize the phone.
Backup for both Playbook and Z10 are not working. One Z10 backup chance was presented, but Link crashed half way thru and has not offered another backup since on either the PB or phone.
I changed the frequency to daily (from weekly) to see if this would trigger a backup attempt...nope.
Conclusion: Link Stinks!Hi ForrestB,
Sorry to hear about the issue you are having. This KB article may be of some assistance resolving this issue. "BlackBerry Link will not detect BlackBerry 10 smartphone when connected using USB" KB33535
Let me know if that helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
SSRS Export to text and NOTHING BUT TEXT!
Is it possible to export a report to text only format? When I export my report to csv and then use the old DOS command to "type" the exported csv file there is a horrible little character at the beginning of the file.
I need to export just as text and nothing but text to drop the exported report into a 3rd party service which processes it. This squiggly little character is tripping the 3rd party system. I cant believe something so simple is not supported natively by SSRS?
I'm using SQL Server 2008 R2.
Please help!
LightSwitchShells.comHi Hale,
Please try to add the following text in the rsreportserver.config to work around the issue.
<Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering">
<OverrideNames>
<Name Language="en-US">TXT (Pipe Delimited Text File)</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter>|</FieldDelimiter>
<Extension>TXT</Extension>
<Encoding>ASCII</Encoding>
<NoHeader>true</NoHeader>
</DeviceInfo>
</Configuration>
</Extension>
By default, the rsreportserver.config is locate in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
There is a document about Export Tab Delimited text file in SSRS 2008 R2, you can refer to it.
http://revweblog.wordpress.com/2011/09/26/export-tab-delimited-text-file-in-ssrs-2008-r2/
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
Software update, nothing but headaches.....
About two weeks ago, I woke up to a message on my phone that said a software update had been downloaded and the phone needed to restart to install. I wish I'd known then what a headache this was going to cause me.
A few days later I noticed that my phone wasn't ringing, my notification sounds weren't playing, and my alarm was going off on the screen but no sound. I always use my phone as my alarm clock, but can't trust it now. I turned my phone off and back on and the problem resolved. It has done it 5 or 6 more times since then. I'm on call for my job every three weeks, and I couldn't trust that my phone was going to ring this past week. Very frustrating.
I've also had an increase in problems making calls and typing text messages. When I try to make a call it acts like it is connecting but I don't hear the phone ring or anything. My husband said it is connecting, and he can hear me, but I can't hear anything. When typing text messages, it will freeze up and I have to exit the message and go back in before it will let me type.
I'm loathe to do a factory reset because of the amount of time it takes to get the phone back to the way I like it. Is this going to be my only option? When I first got my Droid 2, it was replaced twice in the first three months because I had nothing but problems. The 2nd time was a refurbished Droid 2 Global and it has been an OK phone. I've spent so much time dealing with technical issues though that I'm about ready to send Verizon a bill for my time.
I'm not able to upgrade until August, but I can assure you I will never buy another Motorola phone.
Is anyone else having the same problems since the update? Any solutions to the problems I'm having?Have you tried booting in Safe Mode and see if the device works as needed? Try follow these steps and if this doesnt help then I would say its time to try a hared reset because issues do have a habit of showing its evil head after a update because of the update process changes and updates files but doesnt delete any personal settings and the old settings sometimes cause issues..
Try booting in Safe Mode and then consider a Hard Rest.
Enable Safe Mode
Press and hold the Power button.
Select Power off.
Slide the keyboard open.
Press the Power button.
Press and hold the OK key.
Continue to hold the OK key until Safe mode appears in the lower-left of the unlock screen.
This may take up to 30 seconds.
While in Safe Mode, remove the most recently installed applications.
Power cycle the device then attempt to use the device.
If the device works properly, install applications one at a time to identify the application causing the problem. -
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
Question
I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar. Tried f10, alt, nothing! Can I reload an old firefox? There is no firefox logo at top. When I rt click at top I see hide toolbar and leave full screen. To the right there is only a home sign. How can I get my BOOKMARKS ??????? I so need them and hate what ever this is that now shows up on firefox.The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?
Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M. -
Itunes 64-bit on Windows & 64-bit does nothing but give errors!
I've been trying to connect Iphone 3g 4.0.1 on Windows7 64-bit since last 5 days! Tried almost all the tips found on internet regarding this issue and none worked! At first simply downloaded the latest iTunes 9 (64-bit). It didnt work at all and I ended up seeing different errors. Then read this;
http://www.sevenforums.com/installation-setup/4318-release-notes-important-issue s-beta-release-windows-7-a.html
Tried that too and still getting nothing but errors. In last 5 days I encountered the following variety of errors;
Device Manager -> Portable Device -> MTP Usb Devie -> Device cannot start (Code 10)
Device Manager -> Portable Device -> Apple Iphone -> Device cannot start (Code 10)
iTunes -> iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000023)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000035)
iTunes -> iTunes could not connect to the iPhone because an invalid response was received from the device (0xE8000001)
I even tried programs like iPhone Explorer, DiscAid, iFun-box etc. None worked. And now looking for a final answer. Will it work on Windows 7 or not? I am too tired of trying now.I don't know if this will help, but folks on Windows systems (typically laptops) with PM55 chipsets (like their brethen with P55 chipsets and other chipsets in the 5 series and 3400 series) have been reporting a lot of trouble with iPod/iPhone syncing (in particular, 0xE0000065 error messages, but the symptoms may vary).
In cases where no BIOS updates are available, and the BIOS does not have a user configurable C-STATE setting, some success has been achieved by using an old trick ... changing the power management settings on the USB Host controllers, as per the following document:
http://support.apple.com/kb/TS1401
When attempting to connect iPhone or iPod touch, you may see one or more of the following error messages:
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800000a)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800006b)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)
Alternatively, the error may be the same as above but end with a different number. See:
http://support.apple.com/kb/TS3221
(thanks to B Noir for the tip)
Hope this helps. -
I downloaded Mavericks about 3 months ago. Eversince I have been experiencing frequent system "freezes" not always accompanined by the spinning color ball. When this occurs I can do nothing but power down.
Also another issue: After shutting down and opening numbers I get the message that updates are available.. When I go the Apple store it tells me there are no updates available I am using Numbers 09 version 2.1. I thought when I downloaded Mavericks I got the latest version, but apparently not.
normfromncWhen you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Unexpected result from XMLELEMENT() - nothing but XMLTYPE()
In testing XML DB thru SQL*PLUS under an Oracle 9.2 environment, I issued following query:
<QueryStatement>
SELECT XMLELEMENT("Name", p.name) as "Result" FROM PROD_PERIODS p
</QueryStatement>
But it returned nothing but following message that contain only "XMLTYPE()":
<ReturnedMessage>
Result()
XMLTYPE()
XMLTYPE()
</ReturnedMessage>
The table PROD_PERIODS does contain data for the test, which has been proved by removing the XMLELEMENT() function call.
Is there any setting should have been done before hand?
Any hints will be highly appreciated!
Thanks!
SpenserHi Mark,
Thanks for the hint and yes you're right the SQL*PLUS I was using, v8.1.7, is not XML aware.
Regards,
Spenser -
The Iphone 4 patch IOS 7.6 is suppose to be a security update but it freezes the phone and doesn't reset. Help I need my phone. What makes the phone go back to normal? There is nothing but a simulated plug in wire and an ITunes icon on a black screen.
Hi SDPISMENOW,
If you are having issues updating or restoring your iPhone after attempting the iOS 7.0.6 update, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
WM -Storage bin 3000711133 ( nothing but TO no) blocked for stock removal
Dear Friends,
1.User has created TO for 2 qty.
2.While confirming it , he has put 1 qty in qty diff - could be by mistake,
3.Now this one qty is went to stock differnece - Storage type 999 and the storage bin as "TO" number.
4.I suggested them to clear the differnces through LI21 , but they dont want to do it , as it will heat financial accounts too.
5.They want to transfer this one qty from 999 storage type to the required storage type
6.I tried with LT01 - user mvt type 999 , & also 201 , and used souce storage type as 999 and storage bin as TO no, but i am getting message -Storage bin 3000711133 ( this is nothing but TO no) blocked for stock removals
7.even i tried with LT09 - but it dosent work...
It should allow to move the material from 999 through lt01 , in our case it is not allowing, could you please help me to resolve this issue, if i need to do some customisation changes then where i have to do?
Thanks & Appreciates your earlier response.Hello Om,
I request few corrections for my last post.
As understood now, you picked quantity was 2 pcs , while confirming user has mistakenly put 1 pc in qty difference field.
Here when user has entered 1 (reduced quantity that the delivery quantity in outbound delivery) then he has to enter difference indicator for reduced quantity which must have been configured in the system.
Now say that you have deliver the 1 pc which was confimred in TO to customer, at the same time your delivery must ahve been updated with pick and pack quantity as 1.
But still 1 qty lies in interim storage type (XXX) with stoareg bin as trsnfer order number.
Now to put this stock back in original stoarge type and bin.
You please try LT01 with movement type as 999 which is warehouse supervision.
Now in next screen you enter the stoare type (XXX) and stoareg bin i.e. your transfer order number in source data
and destination storage type and bin will be automatically picked.
Now Press Enter . 'You will get warning message as check you entries' ignore that message and save
Hope this will help you. Also if you are getting any erro message with above please give us the detailed escription of erro message
Br,
Tushar -
Nothing but problems since switching out SIM card's at at&t
so lately, i've been having this strange recurring issue with my sim card. every so often the iphone will report that it is not installed even when it is in there, only way i was able to correct it would be to shut the phone off and turn it back on. it got annoying to the point where i took it too AT&T Yesterday and had the sim card's switched out.
Since then i've had nothing but problem's, i went home and my iPhone just started spitting out error's like crazy. It keept reporting "Accessory is not supported by the iphone, would you like to go into airplane mode to reduce sound quality? you will not be able to make or receive calls while in airplane mode"
To me that sounded like a problem with the activation process after AT&T switched out my sim card.
So I plugged in my iPhone into my computer, and it gave me more problems.. Window's was able to detect my iphone but it took FOREVER. I left it in there for two hours until it finally activated the phone.
After that scenario i thought it would be best to try and do a full restore on my iphone to see if that would help clear the lag, i hit the restore button and let the download finish.. then after itunes just hanged there for 3 hours and did nothing. so i had no other choice but to unplug the phone and try again.
Now when i plug the iphone into that same USB port I get 1 of two error's, more commonly i get an "itunes could not connect to iphone due to an unknown error (0xE80000024)" http://img35.imageshack.us/img35/8369/iphoneerror2.jpg
When i restart the computer and try to plug it into that same port i get this error "itunes could not back up the iPhone because a session could not be started with the iPhone" http://img13.imageshack.us/img13/4837/iphoneerror.jpg
If i try an other USB port it will connect and sync perfectly fine, but i cant do a restore to clear the lag issues, if i try it will just hang there. usually the only way i can "fix" this error is to re install window's entirely and start from scratch, which to be honest i'm really tired of doing..
anyone have any idea what could be causing these problems? I'm not positive it's the phone itself so i want to try and restore it before i go to an apple store with these problems..
itunes version 8.1.1.10
Iphone Version 2.2.1 (5H11)
Firmware version 2.30.03
Windows Vista 32 BitBased on your description of the problems before and after getting a new SIM card, and before attempting a restore with iTunes and the problem that occured when trying to do a restore, I would give AppleCare a call at (800) 694-7466, or make an appointment at an Apple store if there is one nearby ASAP.
Maybe you are looking for
-
What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? T
-
3G Signal Loss after upgrading to ios 4.0.1 ?
Hello Everyone, I don't think that I am the only one with a 3GS that is having this problem. I have the iphone 3GS, I was very excited to upgrade to ios 4.0. Once the upgrade was complete everything was just fine. Then came along ios 4.0.1, I figured
-
Can i sync my iphone with more than one itunes library without erasing content?
So i just got a replacement iphone yesterday, and restored from a backup all my contacts and stuff. I dont have my own laptop so when it comes to music i get all of my mine from other computers...this has never been a problem with my phone or ipods,
-
HOW TO PRINT THE SCRIPT DIRECTLY
hi , i want to print the script directly by skiping the prini preview screen can any one help me.. regards, siva
-
Hello everybody, I am dealing with transfert orders return. I created a delivery (VL10G) , posted goods issue (VL02N), and posted goods receipt on the other side (MIGO on Outbound delivery- mvt 101). I then created a return delivery (MIGO Return Deli