Notification is sent to a Role, but Action History display one member only

We have created an approval notification for HR which is sent to a Role. The role has 3 members. The email is successfully sent to the 3 members of the role (expand role is checked). However, on the Action History of the Notification Details, it shows that the submit action to was for 1 member of the role. This is misleading as actually, action is for the role (and the 3 member of the role). We would like the information here to be factual. Show that that the action was submitted for the role or show everyone who received the notification. Can that be done?
Thanks.

Any light on this ?

Similar Messages

Approval status of PR is in process, but action history show 'Approve'

Dear all,
I am on EBS 11.5.10.2 and encountered a problem during the approval process of PR.
The approval hierarchy with PR is planner -> approver1 -> approver2,
and approver2 is the final approver.
Everything of the approval process is OK except that the action performed
by approver1 shown in Action History is 'Approve', but not the appropriate
'Forword'.
Sequence Performed By Action Approval Status
0 planner Submit
1 planner Forward In Process
2 approver1 Approve In Process <---- Here the 'Approve' action should be shown as 'Forward'
3 approver2 Approve Approved
Any ideas will be greatly appreciated!
Regards,
Henry Huang
Edited by: user8960428 on 2011-7-7 上午8:13
Edited by: user8960428 on 2011-7-7 上午8:15

For requisitions the action taken by the approver is recorded. If they click on Approve, the same is recorded in action history.Shivaraj, for POs with the similar position hierarchy, if the approve1 click on Approve, action history does show 'Forward'.
Do you mean the action taken by the approver1 is different between Requisitions and POs?
Edited by: user8960428 on 2011-7-12 上午8:03

HT201412 hello. my phone is factory unlocked. but my iphone support one network only in pakistan. if i insert another network sim it support but cannot make a call or text neither incoming nor outgoing. plz guide me what should i do.

hello. my phone is factory unlocked.
but my iphone support one network (Zong) only in pakistan. if i insert another network sim it support (Catch the signl and show the network name ) but cannot make a call or text neither incoming nor outgoing.
plz guide me what should i do.
ios 7.0.4

There aren't any supported carriers in Pakistan. Apple hasn't released the iPhone there. The OP is using a grey-market iPhone and hence is pretty much on his/her own as regards getting this phone working with the carrier, unless that carrier can help.
Regards.

Search for user role but help poppup display

Anyone ever trying to search for user role from search action bar or user admin page?
Whenever select role and clicked on the magnifying glass icon, help content displays instead of role selection.
At first I think this is a bug. But when I asked Customer Care they said its an expected behaviour which means that this is how the engineers designed it.
Dont you feel weird? because other field like status, correctly displays status info after clicking the icon.
Hope u can try it this out and give your opinion here.

Can you provide a little more detail on what you were trying to do.

APINV : Workflow Action History empty for approvers.- WF Note Empty

I have the invoice approval workflow working in Ebus. When the person (Person A) first receives the customised approval notification they have the WF_NOTE attribute and fill it in accordingly, they submit it to Person B.
When the next person (Person B) in the approval list gets the notification, there is no entry for the comments that person A has entered in the Action History.
If we go back to Person A's closed notifications, we can see their comment in their action history.
The Action history shows for Person A:
Line 1
From : Sysadmin
To : Person A
Details :
Line 2
From : Person A
To : Workflow System
Details : COMMENTS Entered.
Person B Sees
Line 1
From : Person A
To : Person B
Details :
is there a way to do this? or Am I missing something?
I have looked at Metalink and followed the note "Why Action History in APINV (AP Invoice) Approval Notification does not Show Approver's Comments in Details Column ? [ID 804497.1]" but still nothing showing in the approvers list.
Any Ideas Appreciated.
Edited by: pburke on 11-May-2010 18:51
I can see that it is to do with the NID and process ID for the particular notification and it just shows comments relevant to that notification, but nothing in relation to the preceding notifications.

If the two are different notifications , then there would not be the action history shown from the old notification which has been responded.
If you still want to show the action history, then you can have a custom action history table in your notification. This can be done using a special message attribute
with the internal name #HISTORY to replace the default action history table provided by Oracle Workflow with a custom action history region.
Your custom action history table must be defined as an Oracle Application Framework region, or as a PL/SQL or PL/SQL CLOB document that contains text or HTML. For
more information about building an Oracle Application Framework region, refer to Oracle Application Framework Developer's Guide, available from OracleMetaLink note
391554.1.
Hope that helps !
Thanks,
Dilbagh

Notification Action History not showing all the approver's details.

Hi All,
I have a custom workflow which will require many approvals
A1 -> A2 -> A3 ->A4 , when the notificatoin come to A2, the action history shows the from as the sender and to as the A2.
But when it comes to A3, the old entry is not coming, getting only the current user details.
I have chekced the checkbox "expand roles" .
How to get all the old approver;s list in the action history.
Thanks,
With regards,
Kali.
OSSI.

Hi,
When the second notification is sent, that is a different one from the first, so it will have no history.
If you want the history of all the notifications in the flow, then you will need to write something to build this dynamically and include that in the notification - populate the #HISTORY attribute on the message with the history you want to include.
HTH,
Matt
Edited by: Darryl Burke -- advertisement and links removed

UME Role and Action

I am developing a recursive tree in a Web Dynpro App. My tree has some nodes and subnodes. Under the subnodes i have documents. Depending to the permission of the users should be decided what can the user do with the documents, for example, create, upate, delete and so on. I need to check the authorization of users. I want to follow the conzept like the Web Dynpro tutorial RentCar APP with Actions und Permissions. If a user logs on, i can get his UME role and group. My question is: if it is possible to list the permissions behind of one specific role, which is assigned to the user or a group.
In short I want to list the permissions and not only check if the user has it or not.
Please help me.
Regards
Hairong Zhao

Hi Sudhir,
thank you very much for your quick answer. But it can't resolve our problem really.If we only use hasPermission() method to check if the user has right, the efford to check user in our case is too great .
I try to describe our problem exactly. In our case, thers is possible that tausend documents can be attached to a node. we can't create a permission for every document. We create for every node a role, but for document we haven't role. If we don't use the conzept with Actions and Permissions, how can we check the permission of the users, have you another idea?
Regards,
Hairong Zhao

Alert notification is sent with incorrect language

Hello experts,
I have configured technical monitoring in Japanese language.
In the workcenter, the monitoring screen is displayed in Japanese.
But the alert notification is sent in English like following image.
I want to receive the notification in Japanese language.
Could you please tell me how to correct the notification language?
Best regards,
Takashi Nasu

Hi Takashi,
The automatic emails are generated by the background job
'SAP_ALERT_CALCULATION_ENGINE' which created the alerts. This job is
setup in SM37 to run the program 'ACE_CALCULATION_CONTROLLER' in
English language. Hence the email is in english.
Please change the language in the job step to Japenese.
Kind regards,
Roland

SP12: Auto-provisioning failed for role with action "keep"

Hi,
If you want to keep an exisiting role for a user in CUP. It wasn't possible to change the validity of the role. Therefor you have to set parameter 145 value to 1 in database table VIRSA_AE_ERMCONFIG and refresh cache in CUP(solution with SP11).
But know we have problemes with the auto-provisioning.
We can enter the other validity of the role and after that the request provisioning failed. In our workflow the request rerouted to the admin because of escape-route settings. All other new roles in the request are assigned well to the user in the backend system.
Any ideas?
Many thanks,
Alexa

Hi,
we actually have the same Problem, that changes to the role validity with action "keep" are not provisioned to the SAP system.
If it is only possible to change the validity with the action "add" it is not possible to limit the validity of a previously unlimited role. Because as you said another role with the new validity dates is simply added to the existing roles.
The only workaround would be to delete the old role and add a new one with new validity dates. But in my opinion this workaround is not acceptable for the users.
Best Regards
Jonas

Help - someone sent me an invoice, but it only appeared on my phone...

Help - someone sent me an invoice, but it only appeared on my phone as a text, for some reason. I am unable to pay that way, and when I log into Paypal on my computer I can't find the invoice.

I also had to get the email address from my seller and then forward them the money, which looked bad because Paypal didn't report to them how much I forwarded, they just took their cut out of it and sent the seller the rest. I rang Paypal yesterday about this, and was on hold for an hour, only to be told that "Your seller didn't invoice you correctly". !?!?! WHAT THE !?!?! So I was notified by SMS by Paypal, by email from Paypal, and by my Paypal app on my phone, that my seller had invoiced me and how much my seller had invoiced me for, and I was given links to 'just click and pay' in all notifications, which I did click on, and in every case the links just took me to my account where there was no trace of the invoice. So they asked me to get my seller to send the invoice again, which I did...and again I was notified in all the same ways, but there was no invoice yet again. If Paypal had said "Look, we're having trouble with invoicing at the moment. We're sorry, but please get your seller's email address and send it to them that way until we fix it."...then I would have been entirely sympathetic to them. But blaming the seller?!?!...the person who they will be charging for the 'service' of this transaction?!?!?! I feel bad because it was my idea to do this by Paypal to start with. And there has been no help offered here in this thread either.Paypal really has a lot to learn about customer service.

Roles and Action

Hi,
I need a clarification about this basic funda.
administrator user belongs to Administrator Group.
Administrator group contains 2 roles i.e.Administrator role and Superadmin role.
Administrator role contains Manage_all and JMXManage_all actions.
Superadmin role contains Manage_all and Aclsuperuser actions.
Now if I create a role that contains Manage_All,JMXmanage_All actions and Aclsuperuser actions , and If I assing this role to a user call "test", is the test user same as the administrator? As I did this but could not get the desired result. Kindly help me out in understanding this concept.
cheers
Naveen.H
P.S. Loads of points would be awarded..

Hi Naveen,
The MANAGE_LICENSE permission is part of the Manage_all action which is only assigned to the super admin role. Therefore only users who have the super admin role assigned are able to manage licenses.
The administration tools of the portal, such as the Cluster Administration Console and other components in the package com.sap.portal.runtime.system.console, cannot be used by roles which are not super administrator.
Roles defined in the UME parameter: "ume.portal_admin.role" are super
administrators.
Cluster Administration Console, administration tools, super_admin
Because these tools have a great impact on the security of the portal, only the super administrator has the rights to work with them. When launched, these tools check whether or not the user is a super administrator.
These tools can be used if the user has one of the roles defined in the
UME parameter: "ume.portal_admin.role".
The portal comes with a minimal set of permissions assigned to its initial content. These default permissions are designed to provide maximum security for a freshly installed portal.
The default permissions settings are sufficient to enable users assigned to the super administrator role to work and gain access to all initial content. They also enable the remaining standard administration roles (content, system, and user) to access tools specific to these roles, but not to initial content objects. For example, a content administrator has access to the Portal Content Studio, but is not able to gain access to any content objects, such as iViews, pages, and rolesthe Portal Catalog in the Portal Content Studio is empty.
This topic describes the default permissions assigned to the initial content of the portal.
The initial permissions are only valid for a fresh and full installation of the portal. When upgrading a portal, the initial permissions script in the portal is not executed. This prevents the permissions in an existing portal from being overwritten.
For guidelines on reconfiguring the strict initial permissions to allow the pre-configured portal roles to access initial content objects relevant to their role, read Configuring Permissions for Initial Content in SAP Enterprise Portal 6.0 (SP9 & Higher)
Permissions for Super Administration Role
The standard super administer role is assigned maximum access to the entire set of portal initial content.
The user store and data source of the User Management Engine used in your organization determines which standard administrator users are members of the standard Administrators user group after the portal is installed. The Super Administrator role is assigned by default to the Administrators group. Therefore, initially all standard administrator users have super administrator permissions in the portal.
Cheers,
Shaym

I am being sent photos via iCloud but they do not show up in my iPhoto or anywhere else

i am being sent photos via iCloud but they do not show up in my iPhoto or anywhere else. i know they ar sent because something flashes on my screen but i do not get an email.

iPhoto/Preferences/iCloud - set up Photo Steam.

Email notification was sent out twice

I created two jobs using DBMS_SCHEDULER.CREATE_JOB. The first job was to update the table and the second job was to check the status of the first job in dba_scheduler_job_run_details. I also add email notification on the second job by using DBMS_SCHEDULER.ADD_JOB_EMAIL_NOTIFICATION which sends the email to myself. The problem was the email notification was sent to me twice everytime when I do that. My script is as the follows.
DBMS_SCHEDULER.ADD_JOB_EMAIL_NOTIFICATION (
job_name => 'KUDSJ_ENOT_ADBD_ENDPROC'
,recipients => '[email protected]'
,sender => '[email protected]'
,subject => 'Company Schedule Job - %job_owner%.%job_name% - %event_type%'
,body => '%event_type% occurred at %event_timestamp%. %error_message%'
,events => 'JOB_SUCCEEDED');
DBMS_SCHEDULER.SET_ATTRIBUTE(
'KUDSJ_ENOT_ADBD_ENDPROC', 'logging_level', DBMS_SCHEDULER.LOGGING_FULL);
I am not sure where the problem is. Please help. Thanks.
cy

You meant that I should set recipients to null when I do the remove_job_email_notification. I did drop_job and remove_job_email_notification a couple of times already. Could you tell me more specific? Thanks.
This is what I did.
DBMS_SCHEDULER.DROP_JOB(job_name => 'KUDSJ_ENOT_ADB_XXXXX');
DBMS_SCHEDULER.REMOVE_JOB_EMAIL_NOTIFICATION(job_name => 'KUDSJ_ENOT_ADB_XXXXX', events => 'JOB_STARTED, JOB_SUCCEEDED');
cy

CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values? I'd like a new record to use a different form until a given status is updated. I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active. But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice. Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the Actions box up, it is only showing a small list of effects to use. And no side bar to go any further. When I click on the little arrow at top and then click on "load actions"

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?

To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action.

Notification is sent to a Role, but Action History display one member only

Similar Messages

Maybe you are looking for