Number assignment in document types

Hi SDN!
Can I confirm that all number assignment in all document types : Sales, Delivery, Billing , are all meaning the same, that is, number range.
I asked because in billing type, there is a Reference document number at header level. I like to confirm it has nothing to do with this.
regards
Tom

Dear Lakshmi,
I like to clarify my meaning of 'number assignment' .
I mean the document type configuration has this property called 'number assignment'. In sales doc type, it is there. In Billing doc type it is also shown in the books.
So, to conclude, the number assignment referred to in these 2 doc types are different as you explained and sales doc type and delivery doc type number assignment means number range. But that in Billing doc type means reference and allocation numbers.
regards
Tom

Similar Messages

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Table to see pricing procedures assigned to document types

Hi Folks,
Greetings for the day,
How can i see the pricing procedures that are assigned to document types.
1. Is there a specific table name?
2. Is there a tcode where we assign pricing procedures to document types.
For example if there is pricing procedure "abc0000", how can i know what are the different document types that are assignes to this pricing procedure.
I would like to know the table name or transaction code.
Thank you in advance.
Best wishes,
Sarath

First of all, you should know where we assign the pricing procedure. If you come to know this, you would not have opened this thread. As already suggested, you can see all pricing procedures assigned to the available combination in table T683V.
In one way, you can check this. Execute VBAK table, input all document types with some validity period where you can see the related pricing procedure. But here, if you have not created any document with a document type, then this table won't show. So you have to be sure on this.
G. Lakshmipathi

Assign new document type for automatic MRP generated PR

Dear Experts ,
I want to have a document type ZMRP MRP generated Purchase Requisitions ( automatic ).
Also i want it to have a release procedure .
Where do i make the said assignment of document type ?
The same is the case for Purchase requisition for automatically generated PRs through Maintenence orders .
Regards
Anis

Hello Experts ,
I have done the assignments , but the system is still picking up the document type NB .
I may or may not define MRP group in the material master as MRP group is not relevant for my client .
I want to know , from where does the system still pick the document type NB ?
Regards ,
Anis

Number range for document types

Hi everyone,
I want to have anumber range 3200000000----3299999999 for my PO document type ZEOH which is a copy of NB. The number range for NB starts with 45. Now when i am inserting the 32 series & than assigning to the doc type ZEOH system is giving error " insert valid intrernal number range". Please suggest what internal number range can i use or how to use the 32 series.
Thanks

Dear John,
Check if you have maintained proper entries in:
ItmInt - Item Number Interval
NoRgeInt - Number Range Internal
You should be able to save without any errors.
Also, are you able to see the number range in the F4 help for ItmInt.
Regards,
Naveen.

SAP SD Material Determination not reflected in assigned sales document type

Hi Experts,
I have implemented customized material determination, with requirement to change the UoM of the entered material, from GJ to MJ. I have assigned the procedure to 3 document types:
1. sales order type
2. credit memo request
3. debit memo request
However, this setup is only reflected in the 1st sales document assigned with the procedure. It is not reflected in the credit or debit memo request.
I have turned on the material determination analysis in sales order. Per my checking during credit memo request creation, the analysis indicated that the condition is found successfully. But the UoM did not change in the document.
Please assist.
Thank you.
HJMY
Edited by: HJMY on Sep 20, 2011 1:24 PM

Hi Ravi,
Thx for your reply.
But I am creating credit/debit memo request without reference to billing.
When I create credit/debit memo request, the material determination is triggered.
Per my test today for credit memo request, I found that the material determination is triggered.
However, the substition UoM is not reflected in the credit memo request document.
The result is reflected only in sales order.
Please help.
Edited by: HJMY on Sep 21, 2011 3:28 AM

Assigning PR document type to PO document type

Good day,
This is the scenario, I have multiple PR doc types each corresponding to a PO.
PR document types:
NB - standard
Z1 - internal1
Z1 - internal2
PO document types:
NB - standard
Z1 - internal1
Z1 - internal2
Objective: all Z1 POs should be reference to Z1 PRs.
Can SAP automatically assign/restrict the document type of PO based on PR document type? How?

Hi
I am not sure it will work or not
but check following link
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
[http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Regards
Kailas Ugale

Error in assigning sales document type to sales area

Dear All,
I am trying to assing sales document type to sales area, but system is not allowing me to do that
I am having this error message
" First, maintain the sales area <1000/14/00> as a common sales area, and
then assign allowed sales document types. This means: Complete the IMG
activity Assign sales area to sales document types in the sequence
entered here."
Note:
I have never created a distribution channel "14" and division "00" then why system is asking me to define this as a common sales area.
How can I maintain common sales area ?

Dear Ali,
1.You go to VOR1 transaction here you check what is the distribution channel assigned as common distribution channel for your sales organisation and distribution channel ,if it is improper then maintain correct Distribution channel.
2.You go to VOR2 transaction here you check what is the division assigned as common division to your sales organisation and Divisionif ,it is improper then maintain correct Division.
3.You go to OVAO transaction here you assign reference sales organisation to your sales organisations.
4.You go to OVAM transaction here you assign reference distribution channel to your sales organisation and common distribution channel.
5.You go to OVAN transaction here you assign reference division to your sales organisation and common division.
6.Finally you assin sales document type to your referenced sales area.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Nov 11, 2008 5:58 AM

Relation between Account assignment category & Document type of PR

Hi,
For PR doc type "CP" -Capital PR, we have created the "Y" as accout assignment category,i.e currently system is allowing to make the PR for doc type for CP with Y as a accout assignment category.
Now our requirement is that, system should allow to make the PR for caital items with Doc type "CP" with " A" &" U" as a account assigment categoty.
I want to know where the relationship between account assigment category & Doc type is maintained?
Is it in Configuration or some user exist is used?
Regards,
CVB

Hi
There is no direct relation between doc type & Acc *** category. There is an indicator to control if you want to use Acco assingment or not. ( No acc assignment indicator in Document type setting)
Document typr is linked with Item category in Customizing
IMG>MM>PR>DOc type
Inturn Item category is linked with Acc *** categories.
IMG>MM>Acc ***> Link item cata & acc *** cat
Hope it helps
Karthik
Edited by: Karthik on Jun 23, 2011 12:04 PM

User status profile assigned to document type in specific sales org.

Hi,
can anyone tell me, if it is possible to assign a user status profile to the combination sales document type and sales organization?
Maybe with some kind of enhancement and/or user-exit?
Best Regards,
Florian

Hi,
You may use the following user exit to determine the relevant status profile with specific sales organization (VKORG) (There is no standard way is available to do so)
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
regards
Vivek.
Edited by: Vievk Vardhan on Jan 12, 2010 2:46 PM

Number Range For Document Type "AB"

I tried posting in F-01 and got this error: "Number range not maintained for document type AB for the year 2008".Even though i have maintain the number range for AB why it is showing error like this?
Please Help me to solve this issue..
Thanks
Sap Guru
**Points will be assigned

Hi,
Here you are trying to post "Sample documents" for sample document you need to give the no "X2" then Fiscal year, from no and to no..
No year from no to no
X2 2008 1 1000000
from and to numbers can be given based on availability in system...
Sample documents are not actual accounting document and they will not have any impact on your financial position, they are just templates and you can use the temletes for actual postings..
Hope understood.and reward me if you get through..
Thanks,
Vasu..

PR creation - Particular Purchasing group assignment to Document type

Hi
We want particular Purchasing group should be selected w.r.t. Document type during PR creation.
Is this possible thru SPRO??
Thnx
Nilesh

Hi
It is not possible per document type.
The possibilities are -
Can maintain in material master.
Can use personal settings.
warm regards
sairam

FI Number Range Number by Document Type -- different by company code

In transaction OBA7, I assign a number range number (T003-NUMKR) to each FI Document Type.
We have over 40 company codes on SAP. One of those 40 company codes requires sequential numbering of FI documents for the whole company code across all document types. The other company codes require different FI number ranges based upon document type.
I need to identify a solution where I can assign a different number range number by document type for different company codes.
For instance, company code IT01 should use a single number range number for all FI documents -- i.e. RV, SA, AB, etc. Then, all other company codes should use a different number range number for each document type.
Any ideas here? My problem company code is in Italy where our accountants tell us all FI Documents must be sequential, without gaps.

Hi Colin,
 The point is that it is about journals
 Sales Journal = Doc type RV
 Cash Sales Journal = Doc Type DR or have RV&DR use the same number range.
 For clearing you will have to create new doc types eg.
 AB = GL Clearing
 KB = Creditor clearing
 DB = Debitor clearing
The existing companies will also have to use these since these defaults are set in customising, but you have clearly defined Journals that comply with the requirements
It is probable that you will need additional doc types,to ensure compliance. In my case all creditor invoices used Doc type KR/KG (SAP Standard and they use the same number range), for the Italian company i then had:-
 KR/KG = Domestic Purchase Journal
 New Doc Type = EU Purchase Journal
 etc.
Kind regards

Number assignment for ML document is incorrect

Hi,
There is an Idoc Number which should result in posting IR document in the PO , but the Idoc results in Error due to the Error message "Number assignment for ML document is incorrect".
Can any one help me to resolve this issue.
Thanks,
Sridhar Reddy.G

Hi,
You can check out the following:
1.Whether the number range assignment is internal or external.If external,you need to assign correct document number.
2.Check out the number range assignment for document type ML as well as check the number range assignment in FBN1 for ML document type.
Regards
Aravind
Assign points if useful

Po number range as per document type

Hi All,
How to configure PO number range as per document type? Like i want my service POs (doc type FO) with different number range than with document type NB.
Regards,
Shailendra

Define document types. Method
Transaction: SPRO
Menupath -> Materials Management -> Purchasing -> Purchase Order -> Define document types
Select document types:
Enter - Document type (NB) , Type description (Std PO with delivery) , Item interval (1) , NR rng as. (Number range assignment) as 01, Field selection (NB).
Save the details entered.
Then go to Define Number range (OMH6) or menu path Materials Management -> Purchasing -> Purchase Order -> Define number range
Select Interval
Define NO as 01 (Number range assignment already maintained in document types), then give from range, to range. Current number is 0
Hope you have understood and now you can link with number range with document types.
Any clarifications, please revert back.
Thanks,
Ravi

Number assignment in document types

Similar Messages

Maybe you are looking for