Number of Cluster / Votingdisks

Hey,
during clusterware setup 10.2.0.4 (SLES10 - 2nod rac)
I set the OCR Configuration to Normal Redundancy - selected
/dev/raw/raw1 ( which is on san1)
and
/dev/raw/raw2 ( which is on san2)
as ocr disks.
For the voting disks
I set
/dev/raw/raw3 ( which is on san1)
/dev/raw/raw4 ( which is on san2)
/dev/raw/raw5 ( which is on san1)
Now I switched off my san2.
ocrcheck did not came back.
As I switch san2 back on - both nodes were rebooting. Logfiles showed something like clusterware initiated reboot for consistency
Is this due to just one remaining voting disks ? Would help, when I add an additional voting disks on san2 ?
Is it possible to place more ocr disks to the configuration ? Does this even make sense ?
Chris

Hi,
As you know The voting disk records node membership information. A node must be able to access more than half of the voting disks at any time. To avoid simultaneous loss of multiple voting disks, each voting disk should be on a storage device that does not share any components (controller, interconnect, and so on) with the storage devices used for the other voting disks.
For example, if you have five voting disks configured, then a node must be able to access at least three of the voting disks at any time. If a node cannot access the minimum required number of voting disks it is evicted, or removed, from the cluster. After the cause of the failure has been corrected and access to the voting disks has been restored, you can instruct Oracle Clusterware to recover the failed node and restore it to the cluster
You can add an OCR location after an upgrade or after completing the Oracle RAC installation. If you already mirror the OCR, then you do not need to add an OCR location; Oracle Clusterware automatically manages two OCRs when you configure normal redundancy for the OCR. Oracle RAC environments do not support more than two OCRs, a primary OCR and a secondary OCR
see this link
http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/adminoc.htm :)

Similar Messages

How could I enlarge the number of cluster(o-cluster)

when I make the model build in DM Oracle9i
the option of clustering is defalut
(sensitivity 0.5 and max cluster number 10)
then o-cluster makes clusters 20 clusters and leaf cluster is 10
but I want to make more detail(large) cluster..
so, I increase the sensitivity 1.0F and max cluster number 20 then o-cluster make the same result.
How could I solve this problem?

O-Cluster will only return as many clusters it is supported by the data. For example, suppose the data is a bundled together in a single region. O-Cluster will only return a single cluster even if you bump up the max number of clusters. The max number of cluster only limits the number of cluster (leaves) O-Cluster will return. It doesn't force it to return that number of clusters. Increasing the sensitivity will make O-Cluster return smaller clusters (case they exist).
In summary there is no mechanism to force O-Cluster to make more clusters if it doesn't find that the data supports a larger number of clusters. If you would like to get a specific number of cluster or to explicitly control how many clusters are returned, K-Means is a better suited for this.
--Marcos

Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file? I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types. (Ideally, I would like to do this with a C header file only.) Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on. Unfortunately, this capability has not been created yet. Has anyone done something like this before? Thanks in advance for the help.
Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
Solved!
Go to Solution.

smercurio_fc wrote:
Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
You can try LabVIEW scripting, though be aware that this is not supported by NI.
Wow! Thanks for the quick response! We would use this cluster as a fixed data structure. No need to change the structure during runtime. The cluster would be a cluster of clusters with multiple levels. There would be not pattern as to how deep these levels would go, or how many elements would be in each. Here is the application. I would like to be able to autocode a Simulink model file into a DLL. The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object. I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink). To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically. Right now I can do everything but the auto creation of the cluster. I can manually build the cluster to match the Simulink model bus structure and it runs fine. But this is only for an example model with a small structure. Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!

CSV Redirected status is not displayed in cluster MMC

I've seen a strange behaviour in the cluster's MMC
I have created a cluster with 2 Windows Server 2012 R2 and a HP MSA FC storage.
2 LUNs were created : one for quorum and the other for VHDX storage configured as CSV.
In order to test redirected access of CSV disk, I've unmapped the storage LUN for node 2 from within the MSA management interface (SMU).
Then :
- Node 1 is accessing fine the LUN
- Node 2 can't access it through FC
As expected node 2 didn't loose access to storage. Get-ClusterSharedVolumeState shows that the volume is "BlockRedirected" for node 2. While copying data on the CSV from node 2 I can see that the network dedicated to CSV is heavy loaded.
With the Cluster MMC, things are more complicated : the CSV status is green "OnLine" (I expected to see yellow / redirected). Right Click / Properties shows "no" for redirected access... (it is actually true!)
The only way to figure out that the disk is redirected is displaying critical events from event log for this disk.
Is it a normal behaviour ? Shouldn't the MMC display the actual status of the disk ?

Infact, I couldn't check this on a Windows Server 2012. However, I know that this counter is incorrect on a 2012 R2. Even the host is in redirected mode, the status says false.
Few weeks back, I was trying to capture the CSV Status in my
Hyper-V dashboard using this option - but dropped that idea as it was not working on 2012 R2. I did this check only on R2 as my lab only have R2 and I assumed that as we have an alternate with 2012 R2, may be deprecated. Now we can conclude that we
cannot make use of sharedvolumeinfo property.
The option available right now in my mind is to check for the event and double check for the number of cluster disk visible on each host, Though its not the best way.
Get-Disk |where {$_.isClustered -eq "True"}
I am also keen to get this information as I would like to pinpoint the DISK which is in CSV redirected mode on my next version of Dashboard. Lets see if any of our friends could make an easy way.
Good luck !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

CLUSTER HELP RQD

i am confused with cluster... after creating cluster.. how to query..? physically it stores the values of joining records. but how to view it..? pls help
create cluster emp_dept(deptno number(10));
CREATE TABLE dept1
    deptno NUMBER(10)   ,
    name   VARCHAR2(20),
    loc    VARCHAR2(20)
cluster emp_dept
    deptno
create index IDX on cluster emp_dept;
drop table dept1
CREATE TABLE emp1
    empno NUMBER(5)   ,
    name   VARCHAR2(20),
    sal    NUMBER(10,2),
    deptno NUMBER(10)
cluster emp_dept
    deptno
)SELECT * FROM EMP_DEPT ( Table or view does not exists error)
also help me what is cluster id here..
select * from tab where tname like 'EMP%' OR TNAME LIKE 'DEPT%'S

You dont query the cluster you just query the related tables joining them by the cluster key.
Cluster is a method of storage where data from different table are stored in the same block based on the cluster key.
you should try a query like the below
select e.empno, e.name, d.deptno, d.name
from emp e
join dept d
    on e.deptno = d.deptnoAnd if you check the explain plan then oracle would have accessed the cluster.

O Cluster Algorithm giving only one cluster

hello,
I am using Oracle 10g O Cluster Algorithm for clustering. i have 790 rows of data with 18 attributes all are of float data type.
I am using ODM for creating clustering, but clustering resulting in creation of only one cluster.
can any body knows what is the actual problem.
please reply soon..
thanks in advance

It is possible for OCluster (OC) to return a single cluster if it did not find any natural clusters in the data. That is, it did not find any split in the data that would separate well the data into two groups. The number of clusters settings in OC is not the desired number of cluster but the maximum number of clusters. One way to validate this is to look at the histogram of your 18 attributes and see if there are clear peaks and valleys. In order for OC to find a split you should see at least two peaks with a reasonably deep valley (the actual criterion is statistical) in one of the attributes. If you don't see that than OC would not create more than one cluster. I am assuming that you are using ODMR and the data preparation steps suggested by ODMR.
You can also try to increase the sensitivity parameter. This will allow OC to accept clusters that it would not consider significant otherwise.
If you still want to partition your data even when OC did not find any clusters than you may try KM. KM will split the data into K clusters as long as there is enough data for that.
--Marcos

Sun Cluste 3.1 with SAN 6320 - Any Known Issues?

Hello,
We are moving to new Sun hardware with following configurations.
Solaris 8,Sun Cluster 3.1, Oracle 8.0.6.3 on two V1280 connected to Sun Stordege SAN 6320. SAN is also connected to 5 other machines including one windows 2000.
Following were the limitations which we came across during the testing phase.
1. Maximum LUN you can have on a 6320 , co-existing with SUN Cluster is 16. ( You can not have more than 16 LUNS configured on 6320..!)
2. Maximum number of CLUSTER nodes that you can have with 6320 is FOUR.
Refer:
http://docs-pdf.sun.com/816-3381/816-3381.pdf
Bug ID: 4840853
Is anybody else there, already moved/moving to any such configuration and wants to give some tips and suggestions. Please let me know.
Thanks
Sair

An update on the same..
we are having issues with SAN 6320.
SAN hangs when we use 7 nodes with Sun CLuster 3.1 simultaneously accessing the volumes. No volumes are being accessed from moer than a single node.
will update later...

Error while creating table with clusters

Hi
I tried the following
CREATE CLUSTER emp_dept (deptno NUMBER(3))Cluster is created
Then i tried to create the table having the above cluster but giving the errors:
create table emp10 (ename char(5),deptno number(2) )cluster emp_dept(deptno);The error is:
ORA-01753 column definition incompatible with clustered column definitionCould you please help me in this

Your cluster is based on a NUMBER(3) data type while the emp10 table has a deptno column with a data type of NUMBER(2).

Getting a runtime error on SAP R/3 System in Portal 6.0 SP6

Hi,
I just installed EP6.0SP6 on WAS6.0SP7 in Windows 2000/SQL2000.
When trying to config "SAP R/3 System" tab by going to System Administration -> System Configuration -> UM Configuration:
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : pcd:portal_content/administrator/system_admin/system_admin_role/com.sap.portal.system_admin_ws/com.sap.portal.system_configuration/com.sap.portal.uMPropertyEditor
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UMPropertyEditorComponent
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
     at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
     at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
     at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:124)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:250)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:100)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:931)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     ... 38 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation, D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3812: code too large for try statement
                } catch(IOException _jspioex) {}
                           ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:88: code too large for try statement
                        try {
                            ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:73: code too large for try statement
                             try {
                                 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:68: code too large for try statement
                        try {
                            ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3804: code too large for try statement
           } catch (ThreadDeath tde) { throw tde;
                   ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3805: code too large for try statement
           } catch (Throwable t) {
                   ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:49: code too large for try statement
           try {
                     ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:22: code too large
      public void doContent(IPortalComponentRequest componentRequest, IPortalComponentResponse aResponse)
                     ^
8 errors
     at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.launchCompilerProcess(J2eeCompiler_6_30.java:541)
     at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compileExternal(J2eeCompiler_6_30.java:370)
     at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compile(J2eeCompiler_6_30.java:649)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:119)
     ... 43 more
Any idea? Also, I notice some forum thread that mentions we cannot setup R/3 4.6c connection within Portal. Our user store/CUA is on R/3 4.6c.
Is this true?
Thanks,
Edmond

Hi Edmond,
it's not the ume, it's the com.sap.portal.usermanagement.admin package.
In order to redeploy it, go to following directory:
<drive>\usr\sap\<SAPSID>\JC<instance number>\j2ee\cluster\server0 \apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
look for the com.sap.portal.usermanagement.admin.par.bak, remove the suffix .bak and restart your engine.
Don't know of this helps, but maybe it's worth a try.
Regards, Karsten

Could not create a new connection in STRUTS

Hi,
I have done a application in STRUTS using JBOSS as application server, IDE myeclipse, database is MYSQL, current while executing the application at the time of connecting the database it is giving the error as 'could not create a connection ; nested throwable i have given below the server console message can anybody help in this regard to solve this issue.
Thanks
12:37:14,950 INFO [Server] Starting JBoss (MX MicroKernel)...
12:37:14,966 INFO [Server] Release ID: JBoss [Zion] 4.0.3SP1 (build: CVSTag=JBoss_4_0_3_SP1 date=200510231751)
12:37:14,981 INFO [Server] Home Dir: F:\vln\jboss-4.0.3
12:37:14,981 INFO [Server] Home URL: file:/F:/vln/jboss-4.0.3/
12:37:14,981 INFO [Server] Patch URL: null
12:37:14,981 INFO [Server] Server Name: default
12:37:14,981 INFO [Server] Server Home Dir: F:\vln\jboss-4.0.3\server\default
12:37:14,981 INFO [Server] Server Home URL: file:/F:/vln/jboss-4.0.3/server/default/
12:37:14,981 INFO [Server] Server Temp Dir: F:\vln\jboss-4.0.3\server\default\tmp
12:37:14,981 INFO [Server] Root Deployment Filename: jboss-service.xml
12:37:15,809 INFO [ServerInfo] Java version: 1.5.0_05,Sun Microsystems Inc.
12:37:15,809 INFO [ServerInfo] Java VM: Java HotSpot(TM) Client VM 1.5.0_05-b05,Sun Microsystems Inc.
12:37:15,809 INFO [ServerInfo] OS-System: Windows XP 5.1,x86
12:37:16,919 INFO [Server] Core system initialized
12:37:19,591 INFO [Log4jService$URLWatchTimerTask] Configuring from URL: resource:log4j.xml
12:37:50,544 INFO [EJB3Deployer] Default persistence.properties: {hibernate.transaction.flush_before_completion=false, hibernate.jndi.java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces, hibernate.transaction.auto_close_session=false, hibernate.jndi.java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory, hibernate.cache.provider_class=org.hibernate.cache.HashtableCacheProvider, hibernate.transaction.manager_lookup_class=org.hibernate.transaction.JBossTransactionManagerLookup, hibernate.dialect=org.hibernate.dialect.HSQLDialect, hibernate.query.factory_class=org.hibernate.hql.ast.ASTQueryTranslatorFactory, hibernate.hbm2ddl.auto=create-drop, hibernate.connection.datasource=java:/DefaultDS, hibernate.connection.release_mode=after_statement}
12:37:50,653 INFO [SocketServerInvoker] Invoker started for locator: InvokerLocator [socket://169.254.109.142:3873/0.0.0.0:3873]
12:38:23,387 INFO [AspectDeployer] Deployed AOP: file:/F:/vln/jboss-4.0.3/server/default/deploy/ejb3-interceptors-aop.xml
12:38:43,294 INFO [WebService] Using RMI server codebase: http://madhu:8083/
12:38:44,981 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=64;loopback=false;mcast_addr=228.1.2.3;mcast_port=45551;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD(down_thread=true;shun=true;up_thread=true):VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=false;up_thread=false)
12:38:45,059 INFO [TreeCache] setEvictionPolicyConfig(): [config: null]
12:38:45,091 WARN [TreeCache] No transaction manager lookup class has been defined. Transactions cannot be used
12:38:45,169 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.CacheLoaderInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
class org.jboss.cache.interceptors.CacheStoreInterceptor
12:38:45,419 INFO [TreeCache] cache mode is REPL_SYNC
12:38:46,559 INFO [STDOUT]
GMS: address is MADHU:1860
12:38:48,606 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:38:48,606 INFO [LRUPolicy] Starting eviction policy using the provider: org.jboss.ejb3.cache.tree.StatefulEvictionPolicy
12:38:48,606 INFO [LRUPolicy] Starting a eviction timer with wake up interval of (secs) 1
12:38:48,606 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:38:48,637 INFO [TreeCache] viewAccepted(): new members: [MADHU:1860]
12:38:48,934 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=2;loopback=false;mcast_addr=228.1.2.3;mcast_port=43333;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD(down_thread=true;shun=true;up_thread=true):VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=false;up_thread=false)
12:38:48,966 INFO [TreeCache] setEvictionPolicyConfig(): [config: null]
12:38:58,528 INFO [MailService] Mail Service bound to java:/Mail
12:39:04,981 INFO [NamingService] Started jndi bootstrap jnpPort=1099, rmiPort=1098, backlog=50, bindAddress=/0.0.0.0, Client SocketFactory=null, Server SocketFactory=org.jboss.net.sockets.DefaultSocketFactory@ad093076
12:39:05,106 INFO [DefaultPartition] Initializing
12:39:05,200 INFO [STDOUT]
GMS: address is MADHU:2004 (additional data: 20 bytes)
12:39:07,216 INFO [DefaultPartition] Number of cluster members: 1
12:39:07,216 INFO [DefaultPartition] Other members: 0
12:39:07,216 INFO [DefaultPartition] Fetching state (will wait for 30000 milliseconds):
12:39:07,512 INFO [HANamingService] Started ha-jndi bootstrap jnpPort=1100, backlog=50, bindAddress=/0.0.0.0
12:39:07,528 INFO [DetachedHANamingService$AutomaticDiscovery] Listening on /0.0.0.0:1102, group=230.0.0.4, HA-JNDI address=169.254.109.142:1100
12:39:09,591 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
12:39:09,606 INFO [TreeCache] cache mode is REPL_SYNC
12:39:09,653 INFO [STDOUT]
GMS: address is MADHU:2034
12:39:11,669 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:39:11,669 INFO [LRUPolicy] Starting eviction policy using the provider: org.jboss.cache.eviction.LRUPolicy
12:39:11,669 INFO [LRUPolicy] Starting a eviction timer with wake up interval of (secs) 5
12:39:11,669 INFO [TreeCache] viewAccepted(): new members: [MADHU:2034]
12:39:11,669 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:39:18,497 INFO [Embedded] Catalina naming disabled
12:39:21,294 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on http-0.0.0.0-8080
12:39:21,309 INFO [Catalina] Initialization processed in 2656 ms
12:39:21,309 INFO [StandardService] Starting service jboss.web
12:39:21,325 INFO [StandardEngine] Starting Servlet Engine: Apache Tomcat/5.5
12:39:21,512 INFO [StandardHost] XML validation disabled
12:39:21,637 INFO [Catalina] Server startup in 328 ms
12:39:23,200 INFO [TomcatDeployer] deploy, ctxPath=/invoker, warUrl=.../deploy/http-invoker.sar/invoker.war/
12:40:12,434 INFO [WebappLoader] Dual registration of jndi stream handler: factory already defined
12:40:16,966 INFO [TomcatDeployer] deploy, ctxPath=/ws4ee, warUrl=.../tmp/deploy/tmp44694jboss-ws4ee-exp.war/
12:40:17,481 INFO [TomcatDeployer] deploy, ctxPath=/, warUrl=.../deploy/jbossweb-tomcat55.sar/ROOT.war/
12:40:17,856 INFO [TomcatDeployer] deploy, ctxPath=/jbossmq-httpil, warUrl=.../deploy/jms/jbossmq-httpil.sar/jbossmq-httpil.war/
12:40:18,450 INFO [TomcatDeployer] deploy, ctxPath=/web-console, warUrl=.../deploy/management/console-mgr.sar/web-console.war/
12:40:23,731 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=8;loopback=false;mcast_addr=230.1.2.7;mcast_port=45577;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD_SOCK:VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=true;up_thread=true)
12:40:23,747 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
12:40:23,747 INFO [TreeCache] cache mode is REPL_ASYNC
12:40:24,184 INFO [STDOUT]
GMS: address is MADHU:2576
12:40:26,184 INFO [TreeCache] viewAccepted(): new members: [MADHU:2576]
12:40:26,184 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:40:26,184 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:40:27,794 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-ha-local-jdbc.rar
12:40:28,231 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-ha-xa-jdbc.rar
12:40:28,559 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-local-jdbc.rar
12:40:28,934 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-xa-jdbc.rar
12:40:29,325 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jms/jms-ra.rar
12:40:29,762 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/mail-ra.rar
12:40:34,544 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS'
12:40:36,762 INFO [A] Bound to JNDI name: queue/A
12:40:36,778 INFO Bound to JNDI name: queue/B
12:40:36,778 INFO [C] Bound to JNDI name: queue/C
12:40:36,778 INFO [D] Bound to JNDI name: queue/D
12:40:36,778 INFO [ex] Bound to JNDI name: queue/ex
12:40:36,856 INFO [testTopic] Bound to JNDI name: topic/testTopic
12:40:36,872 INFO [securedTopic] Bound to JNDI name: topic/securedTopic
12:40:36,872 INFO [testDurableTopic] Bound to JNDI name: topic/testDurableTopic
12:40:36,872 INFO [testQueue] Bound to JNDI name: queue/testQueue
12:40:37,044 INFO [UILServerILService] JBossMQ UIL service available at : /0.0.0.0:8093
12:40:37,200 INFO [DLQ] Bound to JNDI name: queue/DLQ
12:40:37,903 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA'
12:40:38,262 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=MySqlDS' to JNDI name 'java:MySqlDS'
12:40:38,512 INFO [TomcatDeployer] deploy, ctxPath=/EIISWEB, warUrl=.../deploy/EIISWEB.war/
12:40:39,622 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
12:40:39,637 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
12:40:40,731 INFO [PropertyMessageResources] Initializing, config='com.lsil.struts.ApplicationResources', returnNull=true
12:40:40,747 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
12:40:40,856 INFO [PropertyMessageResources] Initializing, config='com.lsil.struts.ApplicationResources', returnNull=true
12:40:41,106 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../deploy/jmx-console.war/
12:40:41,700 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-0.0.0.0-8080
12:40:42,216 INFO [ChannelSocket] JK: ajp13 listening on /0.0.0.0:8009
12:40:42,356 INFO [JkMain] Jk running ID=0 time=0/234 config=null
12:40:42,372 INFO [Server] JBoss (MX MicroKernel) [4.0.3SP1 (build: CVSTag=JBoss_4_0_3_SP1 date=200510231751)] Started in 3m:27s:391ms
12:41:21,684 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,700 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
12:41:21,731 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,809 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,809 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,825 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,825 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
12:41:21,919 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:31,262 INFO [STDOUT] In ServiceLocator: creating datasource
12:41:31,262 INFO [STDOUT] Referencejava:MySqlDS
12:41:31,262 INFO [STDOUT] [email protected]9
12:41:31,419 WARN [JBossManagedConnectionPool] Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis)
     at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:164)
     at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.createConnectionEventListener(InternalManagedConnectionPool.java:519)
     at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.getConnection(InternalManagedConnectionPool.java:208)
     at org.jboss.resource.connectionmanager.JBossManagedConnectionPool$BasePool.getConnection(JBossManagedConnectionPool.java:529)
     at org.jboss.resource.connectionmanager.BaseConnectionManager2.getManagedConnection(BaseConnectionManager2.java:410)
     at org.jboss.resource.connectionmanager.TxConnectionManager.getManagedConnection(TxConnectionManager.java:342)
     at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:462)
     at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:894)
     at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:73)
     at com.lsil.eiis.validator.main.common.QueryManager.getInfo(QueryManager.java:65)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.lsil.eiis.utility.XMLDTHttpServlet.getInfo(XMLDTHttpServlet.java:186)
     at com.lsil.eiis.utility.XMLDTHttpServlet.doGet(XMLDTHttpServlet.java:44)
     at com.lsil.eiis.utility.XMLDTHttpServlet.doPost(XMLDTHttpServlet.java:121)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159)
     at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
     at java.lang.Thread.run(Thread.java:595)
Caused by: org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis
     at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.getDriver(LocalManagedConnectionFactory.java:291)
     at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:153)
     ... 37 more
12:41:32,403 INFO [STDOUT] Help XML:<Data><Record><RESULT>Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis))</RESULT></Record></Data>

Hi Abhshek,
Please go through the link:Error in Seeburger SFTP : Cannot create pending keystore PENDING/SSH_hosts
Also check certificate expiry date. Take help of basis team so that they could be able to assist you regarding this.
Regards,
Naveen

Help - Downloading the par file into NWDS

Hi,
Can anyone please tell me how to download the par file in NWDS to customize iviews.
What is the pre-requisites?
Is there any step by step procedure available to download the EP iViews and put our codes into that.
Regards,
Nirmal

Hi Nirmal
You can find all pars at this location :
<Drive>:/usr/sap/<SID>/JC<Instance number>/j2ee/cluster/server<XX>/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/
Reneme selected par name (remove .bak extension). And than follow :
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/df7f409cd50a1ae10000000a155106/frameset.htm
Regards
Jakub Krecicki

Error while approving work item

Hi All,
I am getting error while approving a claim request; error is:
error while inserting claim record xxxxxxx in cluster for employee xxxxxxxx
This does not happen always, some time I am able to approve and sometime i got the error.
I am using same set of user ids and same perspnal nos; does this thing matters and causing this issue or this should not cause this problem.
Please advice!
Thanks and Regards,
Honey

Hi Honey,
Could you please check note number: 1374072 which is for the PY-IN-PS. I don't think that this warning message that you are seeing is applicable to the UWL or generated from the UWL component. Error messages like this are usually generated from the ABAP system and more specifically from the application area. Another hint would be to check ST22 to see if there is a short dump occuring in the backend system.
According to the note, this error will be thrown when:
"Error on Approver Screen stating "Error while inserting claim
record <Reference Number> in cluster for employee <Employee
Number>". This happens only when the approver tries approving the
request almost immediately after the employee has submitted the
request."
I hope that this information is helpful to you.
Regards,
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Unable to login After configure BI 7.0 Tech system into portal

Hi Experts,
I have gone through pdf file
Integration of SAP BI 7.0 and SAP EP 7.0 created by Karthik.
I have folloewd all the steps in his document after that I restarted my server then only problem has come.
Any user not able to login into portal. it doesnt shown in the portal screen.if we are giving the wrong password it shows Authentication failed and if Iam giving correct password nothing displayed and not able to get the home page what might be the problem.
In that documnet we have done SSO thru logon tickets portal to BI.
I am using EP7.0 and BI7.0 from ECC6.0
Please help me inthis what might be the problem....?
Thanks inadvance.
Lohi.

Dear
Guide information looks correct to me.
It's pretty hard to tell you what is wrong with so little information.
Check the defaulttrace.trc trace file of your portal environment.
Location depends on stack type (abap + java or java only)
Located in /usr/sap/<SID>/DVEBMGS<instance nr>/j2ee/cluster/server0/log/system/
OR
Located in /usr/sap/<SID>/JC<instance number>/j2ee/cluster/server0/log/
It is very likely error messages are being written there that can be useful to help solve this issue.
Please paste its content in here, perhaps even from other log files that might contain valuable info.
Kind regards
Tom

ABAP WebDynpro work item in uwl doesn't work

Hi,
an ABAP WebDynpro by itself works. But using it in a uwl work item doesn't work:
After clicking the button to start the WebDynpro in a uwl work item a browser opens but the site could not be load.
So something is wrong with the url:
http://<host>:<port>/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fevery_user%2Fgeneral%2Fuwl%2Fcom.sap.netweaver.bc.uwl.uwlLaunchWebdynproABAP&System=T70CLNT100&WebDynproNamespace=sap&WebDynproApplication=zwps_bspobj_Ship_set&DynamicParameter=wi_id%3D000000004020%26WI_ID%3D000000004020&CurrentWindowId=WID1181552609217&NavMode=1
This is the uwl configuration part:
[code]
<ItemType name="uwl.task.webflow.TS97300003.T70CLNT100" connector="WebFlowConnector"
          defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="T70CLNT100" externalType="TS97300003" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher"
                returnToDetailViewAllowed="yes" launchInNewWindow="yes"
                launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=yes,
                                         menubar=yes,location=yes,directories=yes">
          <Properties>
            <Property name="WebDynproApplication" value="zwps_bspobj_Ship_set"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,
                                     toolbar=yes,menubar=yes,location=yes,directories=yes"/>
            <Property name="DynamicParameter" value="WI_ID=${item.externalId}"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="WebDynproNamespace" value="sap"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
</ItemType>[/code]
What's wrong? Any idea?
Thanks,
Susanne

Hi,
Your settings seems alright, Can you look at the default trace and UWL log?
U can find UWL log here
\usr\sap\<SID>\JC<instance number>\j2ee\cluster\server0\log\applications\sap.com\uwl
and default trace in \server0\log .. please check the current default trace.
Cheers!!
Ashutosh

Reg - Deployment Error in NWDS7.0

Hi All ,
Im trying To Deploy Web Dynpro Sample Application By Creating project Name and Application and Iview . When im try to deloy the application after giving SDM Pasword it throws Following Error .
please suggest Valueble inputs .
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/test1' and application 'Test1' are not deployed on the server. Please check the used URL for typos.
Exception id: [00144FFA3533005B000000E2000012EC00047D1D2759F136]
Regards ,
venkat p

Should be here:
usr/sap/System Id/instance number/j2ee/cluster/server0/log/default trace
Ask basis to provide you the trace that's tagged with the exception ID that the error message gives you.
Regards,
Jan

Number of Cluster / Votingdisks

Similar Messages

Maybe you are looking for