Number range and group assignment

When I checked the number ranges for the material types
In my system there are 2 groups with the same number range.
how is this possible?
Edited by: vishnu alapati on Dec 2, 2008 9:54 AM

plz check the one will be with tick of external
check MMNR here check that is there any tick of external
regards
kunal

Similar Messages

  • SAP CRM Error: A number range is not assigned to account group

    Hi Experts,
    We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
    We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
    Request you quick response.
    Thanks,
    Chaudh.

    HI Chaudh,
    I am facing similiar issue. When i am creating BP in CRM WebUI, I am getting an error message: "Error in Transporting Number Range".
    Could you please share your findings, how you solved your issue?
    Dave

  • BDOC Error: A number range is not assigned to account group Sold-to party

    Hi Experts,
    We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
    We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
    Request you quick response.
    Thanks,
    Chaudh.

    Hi Chaudh,
    Please find the exact solution here.
    http://wiki.sdn.sap.com/wiki/display/CRM/IssuesduringBusinessPartnerreplicationbetweenCRMandERP
    Cheers,
    Josh

  • Create number range and assign new product id

    hi,
    can anyone tell me the steps to create the number range and assign it to the product id..
    and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
    thanks
    dinesh

    Hi Dinesh,
    Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
    I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
    You cannot change the product ID once created I think.
    You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
    Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
    Hope this will be useful.
    Regards,
    Naresh

  • Business Partner - Number Ranges and Groupings

    Hello,
    A few weeks ago, we are activated RMCA components and activated Telecommunications 6.0 in a sand box client.
    Now we are doing customizing and application of BP.
    We want, and we could, to range BP in number range from 1 to 9999999999, as the costumers appear in our CRM system. But the problem is that we cannot do the same with AR/SD costumers because we already have old AR/SD costumers, not the same person, in the same range and we don't have not used range.
    I know that we can to convert AR/SD costumers groups, but that problem is that we need to convert costumers number.
    How we can open in the same number, the BP and AR/SD costumer? Can we reorganize the old SD costumers?
    We sure that we are not the first company that implement RMCA in the middle of life cycle that already have AR/SD costumers.
    With best regards,
    Galia Ribinik.
    Edited by: Yes SAP Team on Jan 8, 2012 7:53 AM

    RM-CA:  Number ranges and groupings
    Choose the following in the Customizing: Cross-Application Components ® SAP Business Partner ® Business Partner ® Basic Settings ® Number Ranges and Groupings.
    Define the corresponding number ranges externally in RM-CA and ensure that this RM-CA number range includes both the internal and external CRM number range.
    You can choose any name for the group, but it must be the same as the name in CRM.
    SD Customer Mapping
    Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ®Preparations for Creating Customer Master Data ® Create Number Ranges for Customer Accounts.
    If you also want to create an SD customer during business partner replication, you must create a separate number range for this customer. Assign this number range to the corresponding account group. Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ®Master Data ® Preparations for Creating Customer Master Data ® Assign Number Ranges to Customer Account Groups.
    ·SD Customer Mapping
    Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ® Preparations for Creating Customer Master Data ®Define Account Groups with Screen Layout (Customers).
    You must reconcile the account group settings for the business partner with the corresponding field groups for the business partner in CRM. If for example a field in RM-CA is not defined as a mandatory field in CRM, replication will fail if an entry has not been made in this field in CRM.
    Use the PIDE transaction to control which CRM business partner classification is mapped to a specific account group in RM-CA.
    Define the reverse situation here using the corresponding number range grouping.
    ·        Create and assign an SD sample customer
    To generate an SD customer in RM-CA during the business partner replication, you require a reference business partner. This is used as a template during creation.
    Choose the following in the system: Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create ® Sales and Distribution  (Transaction VD01).
    Create the sample customer using the account group described in the preceding step. The system name for the sample customer must start with the letters u201CMUSTu201D (such as MUSTER_TELCO).
    You must also create the sales area data for the customer. Note that you must maintain each sales area used accordingly.
    ·        Assign SD sample customer
    Assign the sample customer in the TCRMBP_REFCUST table (transaction SM30) and define the corresponding determination. If you only want the system to determine a specific sample customer, you can leave the Business partner category, Group and Partner type fields blank.
    http://help.sap.com/saphelp_telecom472/helpdata/en/65/d7a55dadd52348ad73320774783649/content.htm

  • ECM-number range and authorization contorl doubt

    Hello Team,
    I have below scenario and need help on the same.
    1) I need to differentiate change master and ECR with number range can this be done?
    2) For Team A - need to give only ECR and change master active status control. For Team B- Only change master but in inactive status control How to achieve this?
    3) I have created profiles with status profiles under enge change mang section , but how to make this field mandatory in CC31 or CC01 screen? I browsed and got info like should be activated etc...but i was not able to activate the profiles which were created in Engg. change management section.
    Regards,
    satish

    Dear Satish,
    1.If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
    object used is AENNR and where in you can assign a common number range group and it will be used for creating change
    numbers of both these types.It's not as like the production order type where you can link a different number ange for each
    order type.
    2.Try whether this option will work out for meeting your requirement.In the standard SAP 2 set of number range (one
    internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal
    number  range,where during CC01 without any value for the field change number you can proceed.When creating through
    CC31 you can make use of external number range by giving the change number as the input and you save the data.
    check and revert back.
    Regards
    Mangalraj.S

  • Invoicing billing number range and Accounting billing no range

    Hi
    Want to know the Link between the Invoicing billing number range and Accounting billing no range
    Link between the two no ranges if any
    Rohit

    Hello,
    There is no link between the Accounting document and the Billing document
    Billing documents number range were maintained in VN01 and the Accounting document number range were maintained  i n FBN1 for each financial year against the company code
    If you want the same Number to be generated for both , then
    Use T. code VOFA and check billing document type and itu2019s assignment for Accounting document type for example for billing document type accounting document type is RV and check the number range for billing document type through T. code VN01 and then use T. code OBA7 to see number range object for accounting document and then finally use T. code FBN1 and maintain same number range as per billing document type and mark as external number range then system will generate same accounting document number against billing document after releasing the billing document to accounting
    Thanks,
    santosh

  • MM06E003 Number range and document number

    hi
    Is the functionality of MM06E003 Number range and document number( user exit ) is same in ECC 6.0  and ECC 5.0
    Regards,
    vijay

    Hello,
    Yes, it is one and the same thing.
    Thanks!

  • Need user and Groups assigned to each folders(KM) under service permission

    Hello Experts,
    Need you help for one requirement , in which i need to provide a list of users and groups assigned under Service permission for each KM folders. There is huge amount of folders so it is quite time consuming to get each folders open & to check the service permission and user.
    Do you have any idea on this? Any sugesstion would be appreciated in points.
    -Regards
    AK
    Edited by: AlokSBP on Oct 7, 2011 8:46 AM

    Hi,
    You'll find a lot of help on this if you search for ACL and permission in this forum.
    Here is a code sample of what to use:
    IAclService aclService = (IAclService) repServiceFactory.getRepositoryService(resource, "ServiceAclRepositoryService");
                        IResourceAclManager servAclMgr = aclService.getAclManager();
                        if(servAclMgr != null) {
                             IResourceAcl servAcl = servAclMgr.getAcl(resource);
                             if (servAcl == null) {
                                  logger.debugT("no ServiceAcl found ");
                                  logger.debugT("getting ServiceInheritedAcl ");
                                  servAcl = servAclMgr.getInheritedAcl(resource);
                             if(servAcl == null){
                                  logger.debugT("no ServiceInheritedAcl found");
                             }else{
                                  // Iterating through the ACL list
                                  IResourceAclEntryListIterator servAclList = null;
                                  IResourceAclEntry servAclEntry = null;
                                  for(servAclList = servAcl.getEntries().iterator(); servAclList.hasNext();)
                                                    //here do what you need to do. For example
    if(servAclEntry.getPermission().getName().equals(IAclPermission.ACL_PERMISSION_FULL_CONTROL))
                                            logger.debugT("This is a Full Group ");
    Regards,
    Thomas
    Edited by: Thomas Pary on Oct 10, 2011 1:59 PM

  • Configaration for alphanumeric number range in internal assignment

    Hi Sap Gurus,
      I would like to know how to write the logical data for configuring the Material master number in internal assignment with alpha numeric format.
    Ex: for Raw material type: ZROH10000000000001
          for finished material type : FERT200000000001
      It can be by using user exit or BadI's. Looking for suggestions. Thx

    Use the user exit MGA00002 to work for alphnumeric number range or else you can create the number separate for each material type you want and assign them separately in the group so whne you use particalur mateiral type than system will pick that number range only to do that
    for ROH - From ZROH10000000000001   to ZROH199999999999
    FERT - From FERT200000000001 to FERT299999999999

  • Transport of Number range and release proceure and split valuation

    Dear Gurus,
    Can we transport number ranges from PRD server to Quality Server?
    Also, how will we trasport split valuation and release procedure?
    Kindly suggest..

    Hi
    Number ranges you have to create directly as it is not transportable.
    For release Strategy details, all your Release config details are transported Except for the below details
    1. Characteristics &  values assigned to it ( master data)
    2. Class & assigned characteristics to it (master data)
    3. Values/ranges inside the Release strategies ( classification details).
    These three details are to be recreated/assigned in the client you intend to work upon.
    Regards
    SAM

  • Dep number range issue (External Assignement)

    Dear All,
    i am getting error wile posting Dep (AFAB) for external number range assignment for Document type AF (Dep Posting in Current Year, but in last year it get posted with internal number range only)
    See the error.
    Create document number range 03 using external number assignment
    Message no. AA759
    Diagnosis
    Processing had to be terminated, since you set up the document number range 03 for the year 2011 with internal number assignment.
    System response
    You should create a document number range with external document numbers for periodic depreciation posting, since the document numbers are not assigned from Financial Accounting, but by the posting program of Asset Accounting.  The external number assignment, therefore, should not be understood as manually entering the document number.  It is only external from the point of view of the Financial Accounting application.
    Procedure
    Change the number range 03 from internal to external number assignment in Asset Accounting Customizing.
    Why system is behaving like this. It should be internal number range as i post the Dep in  other clients and it is working properly with internal number range.
    Kindly Suggest
    Regards,
    Shayam

    Hi
    SAP itself contradicting his own statement.
    When i create external number range assignment in one of the other client system show me the message.
    Create document number range 04 using internal number assignment
    Message no. AA776
    Diagnosis
    Processing terminated because the document number range 04 for year 2011 was set up with external number assignment.
    System Response
    For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
    Procedure
    Change the number assignment for the number range 04 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
    Now what to do kindly advice.
    Regards,
    Shayam

  • MIRO Invoice document number range to be assigned based on company code

    Hello all,
    We have different company codes in single client and we want each company code have diffrent set of Invoice document number. and seprate number range assignment i.e internal or external
    But SAP standard support Invoice document number assignment based on financial year..
    Please help me, how I can customize this in my system?
    Regards,
    PAVAN

    Hi Pavan,
    I assume you're talking about logistics invoice number (financial invoice number depends on company code as a standard)
    pls have a look at exit LMR1M003 (function module EXIT_SAPLMRME_003).
    I hope this helps. Kind regards,
    Alvaro

  • Conflict Issue in Number range and need solution

    Hi
    I am facing a issue in SAP Number range conflict. The case is like that
    There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
    We have fatch a conslodate list of all object in excel sheet. 
    OBJECT   SUBOBJECT  RANGE_NR       YEAR          LEVEL  
    Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
    Number range are conflicting based on
    1. Differences between number range intervals
    2. Differences between number ranges levels
    3. Differences between number ranges types (internal/external)
    4.  Number range overlaps are marked
    pls just guide me approch for resolution menthods.
    Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
    Pls advice
    regards
    raj

    Hi
    I am facing a issue in SAP Number range conflict. The case is like that
    There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
    We have fatch a conslodate list of all object in excel sheet.
    OBJECT   SUBOBJECT RANGE_NR YEAR LEVEL 
    Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
    Number range are conflicting based on
    1. Differences between number range intervals
    2. Differences between number ranges levels
    3. Differences between number ranges types (internal/external)
    4. Number range overlaps are marked
    pls just guide me approch for resolution menthods.
    Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
    Pls advice
    regards
    vicky

  • Organization structure R/3 sales office and group assignment

    Hi,
    I have a general question about the organizational structure in CRM.
    When I try to assign an organization unit in the structure to the R/3 sales offices and sales groups in Function tab, the system is asking for a R/3 sales area together with sales office and group.
    In our case a user can create sales orders for different sales areas. In other words the sales office and group is assigned to more than one sales area in SD customizing.
    The problem is that if I assign any employees to an organization which is a sales group and which is assigned to a R/3 sales area + sales office + sales group, in this case the replicated document in SD can only be from one sales area, which is not applicable in our case.
    How can we proceed? Any ideas?
    Thanks

    has now been resolved

Maybe you are looking for