Numbers is blank

I just purchased my mac and downloaded iwork 09 trial yesterday. Now today when i bring up numbers the screen is black and only an outline of the templates. when i click on a template an error message: the document has been moved or deleted. Do i uninstall the trial and then re-install? i can get into keynote and pages just fine.

Welcome to Apple Discussions
Just because your Mac is new & you just downloaded iWork '09 doesn't mean they are up-to-date. Not having the OS & iWork current is the main cause of so many problems users post here.
First, use the Mac OS 10.6.3 combo updater. This fixes a problem with the Hoefler Text font that is not fixed using the delta update (10.6.1 > 10.6.2).
Second, make sure your iWork applications are updated. For iWork '08 that is Pages 3.0.3 & Numbers 1.0.3. For iWork '09 it's Pages 4.0.3 & Numbers 2.0.3. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

Similar Messages

IOS Numbers and Blank Cells

I am a teacher trying to use an iPad with iOS Numbers as a mobile gradebook.
One issue I have is making a blank cell not count in sums and averages. When I enter a new assignment, the student automatically gets a zero until I enter his or her actual grade, which negatively and unfairly affects his or her averages.
Is there a way to skip a blank cell in sums and averages instead of having it automatically count as a zero?
I also have Numbers on a laptop (if that helps).

Hi,
Thanks for visiting our forum and sharing your solution. It'll benefit to other communicators.
Have a good time.
Regards,
George Zhao
TechNet Community Support

When I open pages it scrolls through various numbers of blank pages with a line at the side, then stops at a document, but usually an old document. I have to go to "open recent" to get on the page I want.

Hi
When I open Pages it scrolls through numerouss blank pages with a line at the side 1st, then settles on an old saved pages document.I then have to go to "open recent" to select the one I want. Why?

No
It's the 1st version of Pages I've had on my computer.
Can't delete them as they scroll through them at a rapid pace. The longer I've had the problem the more blank pages it scrolls through.

Error IXOS - No blank volumes found in Jukebox

Good morning esteemed experts.
It is presenting the following error in the execution of a protocol of writing job:
WW_P2
as the executing command is:
P2 Write_CD PoolP2
and the message indicating the IXOS ECR tool Storage Server Administration is:
Write Iso finished, not Written data (not enough available partitions blank)
And the execution of the job log is:
372 950 Job instance started on Tue July 13 2010 8:59:00
IMPORTANT: about to mount WORM server on host localhost, port 4027, mount point / views_hs
IMPORTANT: about to mount CDROM server on host localhost, port 4027, mount point / views_hs
IMPORTANT: calling cmd to get slot numbers with blank volumes from cent4 jukebox
ERROR: No volumes found in Jukebox blank cent4, But one are required
ERROR: ISO write finished job, no data Written (Not enough blank partitions available)
I would appreciate any help to verify the procedure to create space for the jukebox if this is the solution
Thank you very much for your attention, I look forward to any comments to my mistake
Regards
Jose

If you had two different computers running time machine backups to the TC both should create sparsebundles which stay separate.
Even if you migrated files from the iMac backup to the MBP it should not then take over the iMac backup.
But check from the MBP.. mount the hard disk of the TC in the MBP and see if there are two sparsebundles or now only one.
Check the disk capacity against what you have show on the TM in the two computers.. do they match up.
Mavericks must have some serious issues as it is happening rather too often.
I strongly recommend to people who read this.. do not upgrade to Mavericks until you create a disk image of the current computer using another software like superduper or CCC.. TM does not cut it.

How to keep numbers from rounding up?

I am currently using the script found on this page http://forums.adobe.com/message/4098624 to average numbers with blank fields. It is working great, however, I need the answer to not round up. I have the number property checked allowing two decimal places. The answer will automatically round up, but I need the answer to not round up. For example if the answer is 3.506, it will round up to 3.51, I need it to stay at 3.50. I need the second number after the decimal (last number) to remain what it is regardless of what the third number is. Is there a way to do this? Thank you for your help, I have very new to all of this and have very limited knowledge.

You need to trim the value to just the number of decimal places you want displayed. You can use the parseInt method or the Math.floor method of JavaScript.
event.value = Math.floor(event.value * 100) / 100;

Contact Names Sync'd ....No numbers

I syncd contacts of my windows address book to my iPhone 3g 8gb and although all the names are there, all the numbers are blank? any ideas?

Just found out the issue is with the n95 as all my contacts in Windows contacts have no numbers

How to delete sub types in a wage type

hi experts,
how to delete the subtypes in a wage type . with out deleting the wage type but it should not display in the wage type list

Hi Deepti,
Its not deletions, I think u need restriction based on the employee sub group and personnel sub area.
For this u have to do the following settigns
1. Maintain grouping for Employee sub grp in table V_503_G
2.Maintain the grouping for Personnel Sub area in table V_001P_K
3. Then go to the table V_511_B and double click on the wage type, u will be able to view 0 to 9 for EES, & PS
In step 2 & 3 what ever the groupings u have maintained under that number maintain the value '1' and remaining field leave blank. So that the wage type will apllicable and visible to those EES & PS only
If you don't want for any EES & PS then maintain all the numbers with blank in the table V_511_B. That will not display in the list.
Never try to delet the wage type, it leads to errors
Kumar

Does anybody know how to log a Vizio tv onto Airport wifi?

I have an Airport Extreme Base 802.11n (4th generation) and use it for wireless internet for our laptops. When I type the correct password to connect it to the tv, it says "unable to connect." I have looked this up on here and have tried to change the security but my only options are WPA Peronal, WPA/WPA2 Personal, WPA Enterprise, and WPA/WPA2 Enterprise. I haven't tried Enterprise because I don't know what it is, but I have tried both Personal and it wont connect to the tv.
I also do not have it on 5GHz. I'm not too computer inclined but I can figure some things out. I have it set right now for no security with no password and it wont even connect.
Any ideas what I may need to change to get my tv hooked up to it?

If you have tried no security as a test and the Vizio still will not connect, there are a few other things that you can try
Chang the name of your wireless network according to the following rules:
No special characters like an apostrophe, dollar sign, asterisk in the name
Use only normal letters and numbers
No blank spaces in the name
Do not exceed 20 characters. 12 or less would be better.
Try connecting with no security first. If the Vizio will still not connect, try a Radio Mode of 802.11a/n --- 802.11b/g.
If it still wont' connect, it's not going to connect unless Vizio support has a secret to tell you.
If it does connect, then try the WPA/WPA2 Personal setting for wireless security
Use the same rules for the password

Account Manager Question

If I am the account manager can anyone make changes from their phone? I have recently noticed that my other lines phone calls are not showing up. They are there and it tells me how long they were on the phone but there is no phone number.
help...thanks

Give it 24-48 hours; the numbers will show up or it will show that the calling # was restricted or unavailable.
I see the same thing on my account - calls are listed, time and duration, but the numbers are blank for a day or two. It eventually fills in the details.

HP Officejet Pro K8600: change static IP address using printer control buttons

Our network was changed this morning and I am working with a different addressing scheme. I need to change the static address for our HP Officejet Pro K8600 which has no control panel on the printer. I had to do this once before and found instructions which (believe it or not) included something like pressing the paper feed button 23 times. It worked but now I can't find the instructions!!!! It's not something I can recreate because it was very specific. Does anyone have these instructions? I need them desperately.
Thanks.
This question was solved.
View Solution.

Still not what I needed but I did finally find what I was looking for. Clearly not found in any manual. Here it is for anyone else that is looking for the same info.
‎From a post on 11-25-2008 03:46 PM from KFMiles:
I really hope this helps you. Believe it or not there really is a reset for this printer.
I had put in a manual IP address and forgot one piece of data. Then I couldn't print to it or access it. Basically I was out of luck. I scoured the internet, I read the manual, I used the HP online help. No luck. Finally I broke down and called HP directly. Took us about 10 minutes of dialog and redoing everything I did before (patience here on my part). The tech disappeared for awhile and came back with a new step from the printer guru god for K8600. Seems if you enter the code number 230, the printer defaults are reset to the factory values.
Ahhh, you say what? There are only 3 buttons to press and no keypad. The X and the page button mean something besides print configuration (hold X) or print page demo (hold Page). Seems if you press and HOLD the power button, the X changes to a unit code factor of 10, and the page button changes to a code factor of one. DO NOT do this code with the network cable plugged in I am told by HP .. so read on...To enter 230, press and hold the power button (light goes off but unit stays on), then press the X button 23 times, Let them both loose. Wait about 20 seconds, and print yourself out a configuration page (by holding X until printer starts working to print). You should see that your net numbers are blank. This will be normal with the network cable unplugged. Plug the network cable back in and wait about 30 seconds, by this time the router will have assigned a new IP. Print out your configuration again. Whatever you got is your new number until you reassign it by using the webserver. This new IP address is your ticket to this server.
This makes you wonder what other codes are there that we don't know about.

Combining two sales documents into one billing document

Hi Friends,
I need to combine two sales document into one billing document. Header data is same in both sales document.
I have set factory calendar in the payer master.
Tried for data transfer rotine at copy control of item level. But was not sure which routine to be set.
Please let me know, what all settings are required to create one combine billing document.
Regards
Suman

Hi,
Is it delivery based billing or order based billing?
2 orders / 2 deliveries and 1 invoice.
For the above situation you need to write a routine which eliminates document number difference for Reference and Allocation.
If you do not have different customer purchase orders for these two sales orders and in your copy control from delivery to billing your assignment and reference numbers are blank then system will club these deliveries and create one sales order.
Else you need to eliminate these by writing a copy control routine and assign it at the header level.
Hope this helps. Pl. revert in case of further clarifications.
Thanks
Krishna.

I can't set wpa2 password

I setup my Airport time capsule. System works ok with no encription. When I introduce the WPA2 password, my MAC can't connect.

Change the name of the wireless network, set up WPA2 Personal, enter a password, etc and Update.
Do not use any special characters like an apostrophe, asterisk, dollar sign, etc in the wireless network name
Keep the name short.....5-20 characters
Use only letters and numbers
No blank spaces in the name
Same rules for the password
See if that helps.

I have the 5s.. I've noticed that sometimes my keypad disappears ?

Sometimes my keyboard disappears - I should say the letters/numbers do- blank tabs are there.
Is this a software bug? Anyone had this problem ?

Lisaaann wrote:
Sometimes my keyboard disappears - I...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Maximum number of photos in a book?

Well, I've got this 100-page book all set to go, but the pdf file shows the last 25-30 pages as being blank. I've shuffled pages around and gotten different numbers of blank pages, so I'm beginning to think that there may be a limit to the number of photos that can be stuffed into a book. I've got 567 photos in the book layout right now. Is that too many? Has anyone had any experience with books having this many photos before?

Hi!
Thanks for the quick reply. The book is double-sided (100 pages), Picture Book theme. And after much playing around, my conclusion is the same as yours -- there seems to be no limit to the number of photos, only to the number of pages. I've actually increased the number of photos in my book to 587, and they all appear in the generated pdf file.
The initial problem -- blank pages -- seems to have been related to the resolution settings in the iPhoto prefs file. Reducing those numbers resulted in all pages being properly printed. Here's the text of my reply to a reply to another question I posted concerning those blank pages...
I'm using the Picture Book theme. And after much tinkering, I think I've found the problem -- and the solution.
Remembering posts from some time ago discussing ways to improve the quality of the printed photos -- including tweaking the iphoto prefs file -- I used the Property List Editor app to check my book settings (BookTargetDPI-BookTargetMediumIMageDPI-BookTargetSmallImageDPI). The three items were all set to 300. I reduced them to 250 each, then tried 'ordering' the book again. Lo, and behold, there were now 20 fewer blank pages. So I set about playing with different combinations of settings, trying to find the optimum resolutions that would print all 100 pages. I've ended up with something like 250-220-220.
Now I have no idea what these settings actually control, or what the optimum settings would be for this or any other book project, but clearly, they affect how many pages are accepted for printing. While the 300-300-300 settings worked for my last book, that book was only 20 pages. For this current book, those numbers are too high.
I looked at many of the other posts in this forum and wonder if those having trouble with blank pages haven't also played with these settings. I tried moving the iPhoto prefs file out of the Library/Preferences folder in order to force iPhoto to create a new file with default settings, and discovered that 150-150-300 seem to be Apple's preferred settings. But the very first book I ordered from Apple, which used those settings, was a bit disappointing in terms of resolution. Hence my boosting of these numbers for the second book.
The problem of blank pages could also have something to do with file size. At the higher resolutions, the generated pdf file tipped the scales at a beefy 193 MB, but at the lower resolutions, the pdf file is a relatively svelte 133 MB. There might be some limitation built into iPhoto to prevent people from trying to send1 GB pdf files to Apple's printers.
In my case at least, the problem is NOT related to the number of photos I'm using. After playing with the numbers, I actually went back and added a dozen more photos, pushing the total to 587 across 100 pages. And with the new resolutions, all photos on all pages print fine.
I wish I knew what all of this meant and how it could be used to predict iPhoto's book creation behavior, but at least I'll be able to print this book now.
Thanks for your quick reply! Hope my experiences help someone else with similar problems.

Crashes when inserting new pages into Templates from CS6

InDesign CS6 is crashing frequently when page numbers or blank pages are inserted into an InDesign Template file, The problem persists for many different users on several platforms and operating systems.

I have continued to have the same problems since I originally posted, including after the 7.0.2 update, though I have not tested EVERY scenario I did the first time after updating. Has anyone else seen improvement after the update? (I got the 7.0.2 update download via the built-in Adobe updater, not from the website, so I'm not sure where to locate it there).
I am sorry to hear others having similar or the same issue, but hopefully it is helpful to have a thread going where all those experiencing this can add to the list until it is recognized as a bug. And fixed! Though it does not resolve the actual problem, two work-arounds we are using to function in the meantime are to (1) always make a really long document to start with, with all the pages we think we'll need and more and (2) have a new, blank InDesign document with several pages open and drag pages from the blank document into your working document. This is a way to "add" blank pages when they are needed without inserting new pages in any of the traditional ways (which cause crashes). I also always send the crash report in to Adobe and encourage others to do the same.
If you have not already, all of you also having this problem could post a "bug report" here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Numbers is blank

Similar Messages

Maybe you are looking for