.OAM file in Muse - invalid block type (type==3)

Every time I try to insert an  Edge .OAM file in muse and try to publish I keep getting an "invalid block type (type==3)" error, over and over... it doesn't matter even if the OAM file is empty, it still displays this problem... could someone please point me if this is a bug or if I'm just doing something wrong?
Regards

Hi,
I have the same issue but it's not an OS issue (i think) : I'm working on SnowLeopard and I have the same error message. All the http://www.adobekb.com/inserting_edge_content.html steps are correctly followed.
I cannot use the preview mode and cannot preview in a browser as well.
Any idea ?
Cheers,
Pierre

Similar Messages

  • .oam file in Muse not appearing in browser

    When I place the .oam file in Muse and then go to preview in browser it only shows me a black and white box - nothing else. I set the fill and set into invisible and tryed everything but it doesnt work. any ideas what I am doing wrong? (it's an .oam file which was made out of an mp4 video...don't know if its relevant)

    Hi Valentina!
    Good new! I fixed my problem!
    Actually I restarted to create the beginning of my animation in Edge to check all the parts of it step by step with Muse! And everything works! So, I tried to understand where was the problem and I remembered that I made a wrong manipulation before I placed the first time the OAM file into Muse!
    Indeed, I also choose web publish settings when I was in Edge to publish my animation but I didn't need it... and I put these files in the trash! Edge was not happy at all with my manipulation and the animation couldn't work well! Then I restore the files and everything was back to normal in Edge... But perhaps not as much as I thought!
    So, I just have to create again my animation and everything should be fine!
    About your problem, I create a new project in Edge and it's impossible to place a video file .mp4 on stage! Edge doesn't show this kind of file to put it in the library... How did you do?!
    Then I found this video which explain a way to put an .mp4 video in Animate compositions http://www.youtube.com/watch?v=CGyOxwEsEFo I hope that will help you!
    If you want to add graphics on your video, you should use Flash or After Effects at the beginning!
       1. Open the video file with AE or Flash to add graphics on it
       2. Export your new video and use the way of the link above
       3. Enjoy it
    Hope you have all the keys in your hand to succeed now!
    Thank you for your answer on friday
    Bye!
    Anne

  • Transform an Edge .oam file in Muse

    This for when you right-click on a .oam file in Edge.
    I dropped in two additional options of Transform and Poster Image…:

    Hey Thats for your help. I'm new to dreamweaver can you please explain a bit more as to what I need to change.
    Here is the line of code for the Animate content:
    <object id="Page1" type="text/html" width="1116" height="620" data-dw-widget="Edge" data="../../ServiceIQ Online Flyer/edgeanimate_assets/page1/Assets/page 1.html">
            </object>
    Do I just change <object id> to <iframe>? and leave everything else?
    In your snippet below, what is the <COMPOSITION ID>?
    var comp = document.getElementById('<IFRAME ID>').contentWindow.AdobeEdge.getComposition("<COMPOSITION ID>");
      comp.getStage().playMovie('one');

  • Oam file in Muse generate error

    After having integrated a ".oam" file  in a Muse and exported the site in Html, the browser returns this error:
    "MuseJSAssert: Error calling selector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with origin "null" from accessing a cross-origin frame."
    Is there a solution?

    I got this issue this morning, saw this thread and thought everything was going to be okay.
    Everything is NOT okay.
    Take a look at this link.
    Home
    This is actually supposed to be a very long scrolling website with 6 major animations scrolling throughout. As you see it gets held up on the first one.
    This link is what the site is supposed to look like and how it should function.
    Take a look:
    www.maxhilllumber.com
    Now you may be asking yourself, "If he has the whole site up properly and in the right place and everything is working well then why is he bothering with all this?"
    I'll tell you why, and this is my main problem.
    I initially created a copy of my completed website prior to exporting and upon exporting that copy, I got the error. I researched the problem, found this link and thought I was going to be okay, thinking it was an "internal previewing" problem and wouldn't effect the final export to a web server. The result was the first above link, all messed up.
    Now here is where it gets really crappy.
    I thought, "THANK GOD I still have my original "non error" file!"
    I rush back to that file in Muse, open it up, DID NOT PREVIEW THE SITE IN ANYWAY, when straight to export to ftp (I noticed in my earlier example that I had tried to export to html and then upload those files manually to my ftp, it did not fix the problem but upon export I did still receive the pop up error), the site exports up to 88% and FREEZING! I noticed it had completed 9 of 9 tasks and was hung up on an .xml file.
    I had to manually terminate muse, the document was in recovery mode so I closed the program organically this time, not saving my recovered file because the only change was the act of exporting. reopened Muse, reopened my original file, went to preview it AND GOT THE POP UP ERROR!
    Now not only is my copy of my original unplayable, now is my original. Every animation I try to preview hangs.
    Even though the site may be up with a mystery amount of data missing (whatever was not transferred after freezing at 88%) there is now absolutely no way I can get the complete site up again without it freezing nor am I ever able to make updates to it which is absolutely not acceptable.
    I even attempted to recreate from scratch the entire website. I had each of the 6 animations initially on separate pages before incorporating them onto one long master page. I tried to copy all the content on that page a paste it in it's appropriate spot on the master page. It did not work and now neither do my independent animations on separate pages within the document.
    I'm pretty much dead in the water regarding this entire website if I cannot get this resolved.
    Any takers?!
    Zak I'm looking at you!

  • How can you access the content behind an Animate .oam file in Muse?

    I have an animation to open doors at the bottom of a parallax scroll, but once the doors open, I cannot click on any of the buttons in my "room" that were set up in Muse. Anyone have any ideas of how to fix this? I am using CC for both programs.
    par·al·lax: The effect whereby the position or direction of an object appears to differ when viewed from different positions, e.g., through the viewfinder and the lens of a camera
    More »

    Hello,
    In case .oam file is placed above the content, then I am afraid user would not be able to click on the content which is behind the animation.
    There are two workarounds that you have. Either have the content (Buttons behind the open door) placed inside the Animation itself so that users can click on it.
    Or you can have transparent Rectangles (boxes) placed in front of the animation and apply links to them. it should appear like the buttons behind the animation are clickable however it should be these transparent Boxes which would be clickable and are placed above the Buttons and the animation (on the top layer).
    Hope this helps.
    Regards,
    Sachin

  • Why wont Edge Animate preview after placing .oam file in Muse?

    I placed my Edge Animate Animation into Muse but it wont preview when I select preview. It does not even show image or play animation. I followed instruction to place edge animation and in publish setting selected the animate deployment package. Deselected the frameworks via CDN (read this should not be selected but also tried it selected) made sure the stage is transparent. I saved it and published.. In Muse I selected the Place option and selected the .oam file and placed it into my webpage.  The placed file shows with animation image. I made sure to link the asset to file but it will not preview or play animation. Please help!
    Thank you,
    Lynn

    Does it loop when you publish it to the web?

  • Inserting an Edge OAM file into Muse with triggers

    Hello all
    Am creating an portfolio website and to showcase my work I intend having a long scrolling page with different areas of design, such as page layout, infographics, illustrations and animation.
    For each area, I want to have a simple screenshow, allowing the user to click through my work, using arrows to navigate through the artwork.
    Is it possible to insert a series of animations which can be triggered in this way??
    Not sure this is possible??
    You can use the 'Place' command to insert the OAM file, but there is no way for you to trigger the animation. It just starts playing automatically.
    Any help would be greatly appreciated.
    Thanks
    Sean

    Yes thanks for you help with this - I do hope I can solve it - your answers were thoughtful and I have tried them and many others. I don/t want ot work in Dreamweaver for this - otherwise I would have built the entire site there.
    What is most distressing is the lack of support from Adobe.
    I have phoned and left messages for return calls promised in 2-3 hours now 24 hours later no returncall.
    I have been left on hold for an hour til my phone battery went flat. I have pressed 1 and 2 and whatever on the phone support service til I am blue in thte face. I have had echat with the US - but they don't help with these problems over the echat and you need to phone them, and then you get placed on hold and international call rates.
    Therre is no email address I can send my queries to.
    The support has been rubbish.
    The community is great - but this issue needs Adobe's attention and as far as I am concerned is a deal breaker with this product.
    A fix needs to be found straight away.
    But I do thank you for your ideas and support for this issue - perhpas we will both get an answer.
    ciao
    Cathy

  • Can I scale an oam file in Muse?

    It would seem not, as I can't do it.   If anyone knows, please reply.
    The pixel preview of an oam does not even match in Muse.  This makes it hard to place the animation with any accuracy.

    Thanks Darrell.
    I am still new to Edge. Can an Edge file be converted to a Symbol and that file placed and transformed (ie: scaled, rotated etc) in another
    Edge file?
    Let me know if there any links to learn about Symbols in Edge.
    On the off-chance that something obvious in the code below let me know. This is in the Edit HTML window in Muse:
    <iframe src="http://www.first-image.com/_anim/MSF_anim_Edge/index.html" width="600" height="600" scale="20%"  frameborder="0" scrolling="no">
    </iframe>
    I had tried the "scale="20%" but the size didn't change. It seems like a loop function should be able to be entered in code here too.
    Thanks, David

  • Exiting animation to a new web page (using Edge .oam file in MUSE)

    Hello,
    Ok. Here is the situation. I have a webpage that was done in MUSE, on that page there is a mouse click button that starts an Edge animation.
    When the animation finishes I want an ( automatic) action that displays a new webpage on the same website.
    I tried setting up a 'timeline stop' action on the main stage
    window.open("http://homie0106.businesscatalyst.com/menu-1.html");
    No dice. Any ideas? 
    Thanks in advance
    Bob

    GOT IT.  The method I posted DID work.....once I fixed my hyperlinking mistake.

  • .oam file of html5 video trigger code not working in Muse

    I simply want to have a video play on page load. I have done the code for a trigger on one <div> to automatically play a video in Edge. The video plays perfectly in browser preview, even with transparency intact! Just the way I want it. The problem is when I insert .oam file in Muse it doesn't work. Other animations of simple objects and key frames work fine in Muse. But, I can make much more beautiful animations for certain elements in After Effects, with transparency and integrate them with elements in Muse. The video, its transparency and other objects work great from Edge to browser preview but not when .oam file is exported and placed into Muse. I know, I wouldn't build an entire site like this, I just want one or two animations to play automatically, with out controls (which I've been able to do), when the page is loaded.
    I publish with business catalyst to a my own domain, with Creative Cloud.
    Attached is a video where I'm at.
    What is the code or method to get to work?

    HI,
    Ok. I know that mov is not supported in Firefox nor Chrome, now.
    When I put the trigger in Edge to play the .mov file, it works when I preview from Edge to Safari, and not in any of the other browsers. This leads me to think that Safari supports .mov files, with and without transparency.
    However, when I try to put the .oam file generated by Edge into Muse and run the page in Safari the video doesn't work. Is this a .mov support with Muse? Does the video need to be uploaded to the Adobe Business Catalyst server? Where I publish my site?
    .mov and transparency aside, I can't get any video to play in any browser from the .oam file placed in Muse. Nothing plays in preview nor when I publish in Muse. I get the previews to work from Edge for the corresponding video for each browser. And yes, when controls in put in it says wether the video is supported or not. But I would want no controls and the video to play automatically on page load. Ideally I would like transparency. But I realize that's a browser support thing.  I don't see why all browsers don't support all video types and WITH transparency. C'mon now it's almost 2014! Am I right or am I right? Ok, sorry.
    I followed everything in this Tom Green video. Pretty sure all my code is correct.
    http://layersmagazine.com/embedding-video-in-adobe-edge-animate.html
    Picture shows code for working .ogv in Edge preview but not from .oam file in Muse in preview nor publish.
    Not sure why it won't even show in preview from Muse. But thinking when I publish, the video must have to be local on the publish server right?
    Am I missing something? Do I need to insert HTML into Muse, not the .oam?

  • Edge Animate's OAM file problem placed in Muse or other unknown problem??  Please help!

    Hi,
    I need help please.  Did anyone do a whole page animation in Edge Animate and place the OAM file into Muse, and somehow all the menu and social media icon buttons in Muse are blocked by the placed animation?  All my menu buttons, social media icon buttons and a link are not working (blocked by the transparent AN stage).   I can't go to any other pages because of this issue when previewed in browser.  My animation is a slide-open page from center of the page to both right and left side, also text moved up to the top.  All are moved out of the stage once animation finished to show the home page with contents, including menu and social media icon buttons.  Thanks for your help in advance!!
    Thanks,
    mykw123     

    That answers why the two G4's talk normally! I do
    have the TCP/IP settings set up manually.
    Well, if they are already set manually, maybe you should change them to Auto-negotiate. You shouldn't have to use the Manual setting at all. If you so, then someone, usually the people who wrote the driver for the network card, have screwed something up. It then becomes your job to fix it.
    The problems are just very slow document/file
    transfer from either new to old or old to new
    computer over network, which usually is great with
    the two G4's.
    That is probably the problem. You may want to go ahead and setup the new machine with manual settings to match the G4s. Otherwise, even the Internet will be noticeably slower.
    As for Target Disk Mode...so reboot the old G4
    holding the T key and the hard drive should show up
    on the desktop of the new computer?
    That will do it. It is the best and fastest option to transfer large amounts of data. But even target disk mode is kind of slow. A real, external firewire hard drive will be the fastest of all. It is an excellent idea for backups and this kind of thing.

  • So I can't use an OAM file from Animate as a button in Muse?

    I placed 3 oam files into muse but it doesn't allow me to use them as buttons (links) to anchors within my page, is this correct. OAM's can't be used as buttons?

    I placed 3 oam files into muse but it doesn't allow me to use them as buttons (links) to anchors within my page, is this correct. OAM's can't be used as buttons?

  • Link to a new page in Muse using Adobe Animate oam file

    I created a small animation in Adobe Animate and placed an .oam file in Muse. Now I want user to click on the animation and link to another page on the same site. A very simple task you might think. But to my surprise there is no hyperlink window available when I select the Adobe Animation element on the page. For text and images I have the hyperlink window available but not for Adobe Animate oam files. I think you need to add this feauture in the next release.

    I also want to know it how to do that?

  • .oam file from Edge not showing as loaded cursor in Muse

    My text is animated, shows up properly in browser preview, but when I go to import the .oam file into Muse I get a corner cursor (not loaded) and then an empty box.  No file.
    I've reserved the file several times in Edge, restarted both programs, both are latest version.
    Ideas anyone?

    Hi dparkerseviltwin,
    Does the animation show up, in the Muse "Preview Page in Browser" option?
    Regards,
    Sonam

  • OAM File and Scroll effects Not AutoPlaying in Muse

    Hello
    I placed an OAM file in muse which contained a slideshow ( slideshow is a basic slideshow provided by muse ) and i noticed that it doesn't work when i activate the edge animate scroll effects. The autoplay function does not work, nor does the "advance 1 second every pixel" function. This is a big one, i really need this effect to work. Otherwise edge animate is pretty useless without it. Somebody please help. Thanks

    Hi David,
    I see the issue you're having on your website. I'm having trouble reproducing it myself. Can you please send your file so I can take a closer look at what is happening? You can send it to [email protected] with the subject attn:Dana and include a link to this thread.
    Thanks,
    Dana

Maybe you are looking for