OBIEE effecting hyperion service

Hi experts,
i dont know if this is the correct forum to ask this question . i have two services in one server i.e. OBIEE and EPM . both are running simultanously . when i restart the OBIEE service then EPM automatically shuts down and i again need to start it manually . unfortunatly no proper reason is specified in the error logs . i would like to know if there is any connection between these two applicatons and what is causing the problem for this .
Please let me know
Thanks
Kanna

We got it, There needs to be environment variables to be set up on the OBIEE server system . you need to set as follows. Refer note \
Best Practices for Implementing
Essbase as a Data Source for
Oracle Business Intelligence
Enterprise Edition versions
10.1.3.3.2 and above
Do you have your environment variables setup correctly for essbase. ARBORPATH and either PATH on windows or LD_LIBRARY_PATH on Linux or Unix. The dll you mentioned is actually located in the path bin directory specified below.
For example;
Linux:
LD_LIBRARY_PATH=/data/app/oracle/Hyperion/Analytic ServicesClient/bin/:
ARBORPATH=/data/app/oracle/Hyperion/AnalyticServic esClient/
Windows:
PATH=C:\Hyperion\AnalyticServices\bin
ARBORPATH=C:\Hyperion\AnalyticServices

Similar Messages

Future Simulation Report, using OBIEE or Hyperion

Dear All,
I have a requirement to create a simulation of the future maintenance schedule, and future machine usage. We got option to use OBIEE and Hyperion. I have little experience with OBIEE and I think it can be achieve using 'what if model' and 'trends analysis', But I never have experience with hyperion.
Actually what is the difference of this 2 product?
As I know the hyperion only used for financial planning. Could this requirement also able achived using Hyperion?
Best Regards
Gumas

Yes you can create an IBot for the specific dashboard/answers which you want it to delivered to specific person or your self via mail. you need to define the require parameters for the IBot and also schedule it depending upon your requirement so that once the run is completed it will send the job to mail.
Thanks,
RM

Issue in OBIEE 11g Presentation service.

Hi All,
I found a problem in OBIEE 11g Presentation service, i.e., When i created an analysis with few columns in the criteria, it showed proper result, but when i deleted one column and then again add the same column in the criteria, result did not show the added column.
Anyone else find this issue?
Please share your views..
Regards.

On the left hand corner you will see list of views in the report, on a basic analysis you will see title and table view. Select the table view and click on edit ( pencil symbol ). A new page opens up, scroll down a little and you will see the columns included and columns excluded sections. Make sure the column that you are trying to add to the report is not present in the excluded list. If it is, drag and drop it above.
Answer points if question is answered.
Thanks,
-Amith.

Hyperion Services Restart Doc

Hello All,
Can anyone pls let me know where i can find the document to stop and start all the hyperion services version 11.1.1.3 and 11.1.2.1?
Thanks,
Ashu
Edited by: Ashu on 11-Jan-2013 07:10

Absolutely
http://www.google.co.uk/search?hl=en&safe=off&tbo=d&site=&source=hp&q=essbase+stop+and+start+services&oq=essbase+stop+and+start+services&gs_l=hp.3...1197.6732.0.7003.32.30.0.1.1.0.171.2733.20j10.30.0.les%3B..0.0...1c.1.Ytnb52-6_UQ
Steve

Problem enabling Verbose GC in Hyperion services

In the Windows environment, we have for Hyperion, we start and stop Hyperion services through Microsoft Services application. So in this Microsoft Services application, we are referring to Hyperion delivered .exe files which start or stop the service based on users request. These .exe files do not refer to any of the webblogic configuration files during startup, they just invoke their configurations from the .exe file. Also Oracle only delivers .exe files for those services and no code related to building those .exe files.
Now my problem is that, I have to enable verbose GC for all the services so we can use that information for debugging OutOfMemory issues. For enabling verbose GC, I have added necessary commands in setDomainEnv.cmd file, but those changes arent getting picked up becuase when we start those services, it refers to the .exe file and that does not invoke any of the web server configuration files. So can you please tell me, how Oracle builds those .exe file and how to embed the Verbose GC commands into those files and build the new .exe file which we can refer to for start/stop the service.
I appreciate you taking time to read this and please throw any ideas or question you have for me.
Thanks,
Chaitanya Kosaraju

Hi John,
I'm getting the below error when I have OOM issue, can you please let me know what exactly is causing the issue
####<Sep 10, 2012 11:02:56 AM PDT> <Critical> <WorkManager> <P01APW290> <AnalyticProviderServices0> <weblogic.timers.TimerThread> <<WLS Kernel>> <> <> <1347300176948> <BEA-002911> <WorkManager weblogic.kernel.System failed to schedule a request due to java.lang.OutOfMemoryError: nativeGetNewTLA
java.lang.OutOfMemoryError: nativeGetNewTLA
     at weblogic.work.SelfTuningWorkManagerImpl.getWorkAdapter(SelfTuningWorkManagerImpl.java:252)
     at weblogic.work.SelfTuningWorkManagerImpl.schedule(SelfTuningWorkManagerImpl.java:148)
     at weblogic.timers.internal.TimerManagerFactoryImpl$WorkManagerExecutor.execute(TimerManagerFactoryImpl.java:133)
     at weblogic.timers.internal.TimerManagerImpl.execute(TimerManagerImpl.java:622)
     at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:277)
>
####<Sep 10, 2012 11:02:56 AM PDT> <Error> <Kernel> <P01APW290> <AnalyticProviderServices0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1347300176962> <BEA-000802> <ExecuteRequest failed
java.lang.OutOfMemoryError: mmAllocArray - Object size: 16, Num elements: 0.
java.lang.OutOfMemoryError: mmAllocArray - Object size: 16, Num elements: 0
     at java.lang.Class.getDeclaredMethods0(Native Method)
     at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
     at java.lang.Class.getDeclaredMethod(Class.java:1935)
     at java.io.ObjectStreamClass.getInheritableMethod(ObjectStreamClass.java:1349)
     at java.io.ObjectStreamClass.access$2200(ObjectStreamClass.java:52)
     at java.io.ObjectStreamClass$2.run(ObjectStreamClass.java:448)
     at java.io.ObjectStreamClass.<init>(ObjectStreamClass.java:413)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
     at weblogic.common.internal.WLObjectOutputStream.writeObjectWL(WLObjectOutputStream.java:100)
     at weblogic.cluster.MulticastManager.timerExpired(MulticastManager.java:759)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Do we have any Management Plug-in for Hyperion Services

I would like to know if we have any Plug-ins available for mointoring Hyperion services like HFM, FR, FDM, DRM etc thru OEM.
If any one is useing it please share your experince and point me to any documentation available for it
Regards
Rajeev

I'd add to Joaquin's answer that the standard table for cities is ADRCITY table (not ADRC). And if you have maintained SAP Regional Structure then there will be standard search help available for the street field.
And you can read more about [SAP Regional Structure here|http://help.sap.com/saphelp_crm700_ehp01/helpdata/EN/e0/597b52e88b11d4b35d0050dadef62b/frameset.htm].

How to monitor Hyperion services

Hi Experts,
Some of the services stop working/not responding randomly which we come to know when user inform us.
We find this is due to Hyperion services (like workspace and Planning) stop working.
Is there any workaround (or better way to monitor) so that user continue access all features without any trouble?
Normally we restart Hyperion services and everything again working normally.
Regards
Kumar

Hi,
Try this link below. It describes how to get alerted when a service stops.
http://www.eggheadcafe.com/software/aspnet/31303233/you-will-need-to-create-a-bat-file-to-do-the-emailing-and-in-the-properties.aspx
Cheers,
Alp

Alert on Hyperion services down

Hi,
Could you please advice how to monitor Hyperion services if get down due to any reason?
Will it possible to get email/alerts?
Edited by: Kumar 1 on Dec 23, 2011 1:43 AM

we are handling it using shell script ...which keeps an eye on the respected services. once that services goes down we get an email

Manage hyperion services with OEM

is anyone know how to config OEM to monitor Hyperion services?
I knew this a patch for OEM 10 which can maike OEM to monitor hyperion financial management serivce. I want to know how to monitor other hyperion services
thanks

I have the same issue finding documentation.
I'm aiming for GC 11g and the target Hyperion is 11.1.1.3
If i find same, I'll update

Hyperion Services Manager

Hi,
I wanted to know if any of you is aware of a utility called Hyperion Services Manager. If I am correct it was developed by the Hyperion Developer Network. Can anyone tell me how I can get this utility?
Shehzad

I made a primitive .net application as well but it was more of a waste of time, since everytime i'd think of a different scenario and then change the code. It wasn't that comprehensive. I think with V11 the service startup sequence shouldn't be a problem (although I haven't worked with V11 so can't be sure about that).
As far as the monetization goes, I'm not sure how viable this application would be, but I'd be glad to collaborate with you and get a product up and running.

Intergration OBIEE with Hyperion WORKSPACE and Shared Services

Hi experts,
When I try integrate BI Punisher to Hyperion workspace and Shared Services, But When i come to Admin-> BI Punisher -> Integration. I don't see Hyperion Workspace and Shared Services. How can i do?
Please help me.
Thanks

do you have some old external authorization entries in your css.xml? (they occuur if you delete external user directopries from the sort order (see documentation of HSS). In our case we had arudimantary entry there. We deleted it (via HSS UI) en till now its running fine. The error did not occur after the change. (you have to re start HSS service after the change)
http://[hss server]:58080/interop/framework/getCSSConfigFile (or different if you changed from defaults)
Also: you mention 100 users? But how many groups are you imortinh/caching?
Edited by: Detlev on Apr 6, 2009 3:35 PM

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Error in starting OBIEE 11g BI services

Hi,
When i starting the BI services I am getting the following error in browser page.
Error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Url:
http://10.154.19.91:9704/analytics/saw.dll?bieehome&startPage=1
Adminserver log report:
Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.
How to solve this?
Thanks,

Hi sateesh,
Seems your database listerner and opmnctl is down....first start these in your services pane and then try starting your BI server....but keep in mind close the admin tool if it is open .
This might also help [http://gerardnico.com/wiki/dat/obiee/start_11g]
By,
KK

Error while configuring OBIEE 11G OPMN Service during Installtion

Hello,
i tried installing 11G with simple install on Vista and didnot work, I think 11g does not work on Any Vista and not sure of W7
second, i tried installing the same on Windows XP and the installtion worked fine till the end and while configuring OPMN Services,
the OBIPS Services and OBICCS services failed, i retried to configure this services with "retry" option but never worked, so i skipped this part thinking that
i can configure this manually. finally i was not able
weblogic's Admin server, Managed server, Node manager and Analytics.war deployments are all healthy in EM Console and Weblogic console
the Fusion Middleware control in EM Console shows the BI Components are not started and i tried restarting it and but never started.
so i think there is something wrong with OPMN configuration at the end of installtion
is there a way to trouble shoot this.
i tried searching of SAWSERVER service so i can start the manaully, but it did not start
i did a softwareonly install on top this single instance installtion thinking if that can help me, but it didnt
so please anyone help me
Thanks
Kumar

Hi Kumar,
I believe OBICCS is the Oracle BI Cluster Controller Service. That particular service requires a static IP address. A lot of people use the loopback adaptor to accomplish.
Here's a quick rundown of some things you should check before installing OBIEE 11g.
1. Make sure you have a static IP (use a loopback adaptor if you have to).
2. Make sure your static IP adaptor is the first adaptor in your connections list. You can do this by going to Control Panel -> Network and Internet -> Network Connections -> Advanced. Use the up and down arrows to ensure that the static IP is the top of the list.
3. Make sure you hosts file (c:\Windows\system32\drivers\etc\hosts) has the proper entry for the static IP address. For example, if your computer is called MyComputer and your static IP is 192.168.0.1, then the first entry should be: 192.168.0.1 MyComputer. Note: You may need to have your domain on your entry. ie. 192.168.0.1 MyComputer.mydomain.com.
I recommend you check those things. If you missed one of them, fix it and then back out the 11g install and re-install.
Good luck and if you found this helpful, please award points!
-Joe

OBIEE 11g presentation services login error

Hi All,
i am new to OBIEE 11g i have installed software and when i tried to login presentation services it is giving following error please help me.
i stated all services in EM and in services (oracle process manager and node manager also)
Enter your user id and password.
Unable to Sign In
An error occurred during authentication. Try again later or contact your system administrator.
please help me
reg,
jel

chane the password in weblogic console for weblogic user and try one more time..may be its problem of wrong pwd..

OBIEE effecting hyperion service

Similar Messages

Maybe you are looking for