OEL6.1 in VM manager does not see network card

I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.

I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
I then used the create new Virtual Machine and selected the server pool.
I selected the ISO file with OEL 6.1.
I gave it a name, memory size, console password.
Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device.

Similar Messages

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

PulseAudio does not see my card (and I have to use PulseAudio)

ALSA works fine.
To be specific, pavucontrol does not see my card (only sees my ATI HD5700 graphic card as HDMI output under "output")
Here's aplay -l:
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Card info
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Giga-byte Technology Device a002
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Interesting thing that happens:
[bogdan@galaxy alsa]$ aplay -Dplughw:0,0 -fcd Front_Center.wav
aplay: main:660: audio open error: Device or resource busy
The reason I have to use PulseAudio is stupid skype that crashes on start without it installed.
Help?

Yep, that's the one I have installed. However it looks like the problem fixed itself. The sound now works, HOWEVER, I have a 5.1 system and only center, rears, and the sub works. Left and Right (main) don't. pavucontrol is set to 5.1 output. When I turn down the individual volumes of main left and main right, the center speaker is the one that actually is turned down. It's as if PulseAudio thinks that center speaker somehow represents both main left and right.

Previously networked computer does not see network

I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???

Leslie Weinberg wrote:
I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???
You might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592
They may not help, but they're easy to try and shouldn't hurt anything.

PC itunes does not see network

Hi all,
My MM can see the itunes Airport speakers, but the itunes does not see the speakers (the dropdown menu at the bottom of the interface) on my PC laptop. It used to, but since I switched routers it doesn't anymore. Any idea to configure the PC itunes?

fixed itself it seems.

Encoder 3.1 on Windows 7 64bit does not see video card

hi
any help or suggestions would be greatly appreciated;
We are running Newtek's VT[5] on a windows machine and have been
very successful running Flash Media Live Encoder 3.1, streaming Live
to a server.
Recently we were upgraded from XP and 32bit to Windows 7 and 64bit;
Now the encoder does NOT see the video, although it recognizes both
the VT video device and VT audio device. My understanding is that
Flash Media Live Encoder 3.1 should run on the operating system
and with Newtek VT[5] (even though the VT capture card is not on Adobe's
official list)
http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf
Of course....Adobe wants me to purchase a contract for tier-2 support to answer
the question of whether the encoder will work on our 'new' setup.
again,
any help or suggestions would be greatly appreciated;
calvin tullos
space telescope science institute
[email protected]

Are you sure that correct and latest device drivers are installed on that machine?
Please check the video device settings. If FMLE is able to detect the device it should get the signal and work with that.

HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

Notebook does not see mPCIe card (asm1061)

Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)

that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings

AirPort in Intel iMac loses connection and does not see network

I bought an Intel iMac in the summer of '06. I had no problems connecting my airport card to my house wireless network which uses an AirPort Extreme Base Station.
In september I brought my iMac to college and used an AirPort Express as my base station. I had no problems other than that the computer did not automatically reconnect to the network upon start up.
In december I returned home and configured the AirPort Express (located on the main level of the house) to extend the network of the AirPort Extreme (located upstair in the bedroom next to my iMac).
Lately the iMac loses connectivity to the wireless network randomly while the computer is on, even in the middle of using it. Not only does it lose the signal but does not list my network when i click the airport signal icon on the top bar of the screen. Once in a while it will have it listed but will give me an error when trying to connect. The only way I have of fixing the problem is to restart the computer.
I know the airport base station works fine and the network is still there becasue I have a PowerBook G4 that I will put right next to the iMac and the PowerBook will still be connected to the network.
Can someone help?

I have a very similar problem. My machine's airport connection has always been a little flaky, but it's always gone on working. However, yesterday I turned on WEP 128 bit encription. It now connects for a few minutes and then I see the signal strength gradually die until it goes off completely. There are then two ways to get it back working: 1. close the lid, then open it again; 2. tun off the airport, then turn it on again. When I do that the signal strength suddenly comes on full after about 3 seconds. The G4 iMac I have doesn't suffer from this problem. I am using a netgear access port as the base station.
Macbook Pro Mac OS X (10.4.8)

Iphone does not "see" network

friend visiting my daughter. her new iphone does not locate my daughter's wifi. my daughter is connected to it with mer macbook. the phone "sees" other networks in the areas. why not this one?
PS had her shut down phone and then turn it back on. no effect.
had her enter the network name in "Other," but it still could not locate it.

it is not hidden.
N (airport extreme base station)
other devices, including my iphone, have connected to this network recently. as noted, my daughter's macbook "sees" and is connected to the network.
the network is up and available.
the iphone can detect other networks in the vicinity, also detected by the macbook, but not the one located 20 feet away.
has to be something regarding that iphone, right?
device has been restarted.

Compaq Presario CQ62 laptop does not see SD card

I have a Compaq Presario CQ62 laptop (Windows 7 64bit) that has a built in media card reader that has never worked.
When I insert the SD card it makes the "USB Beep Up sound" that says it sees the card - but when I go to MY COMPUTER, there is no device listed for the SD card. How do I read and write to an SD card with this laptop?

I have done that.
In DEVICE MANAGER I can see the SD Card show up under "Disk Drives" when the SD card is inserted, and disappear when it is removed.
Under Storage>Disk Management the SD card shows up as drive 1 (main drive is drive 0) but no drive letter.
When I right-click on the SD card Drive 1 and try to change to a drive letter, I get an error message and it will not let me. It will not let me format either.
The driver is from microsoft and is old - 6/21/2006. I did some google searching and read that a driver update would fix the issue. I uninstalled the card reader driver, got a new driver from HP and installed it, and when I inserted the SD card it loaded up the old driver...ugh.

Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

My EOS 350d has not worked since it was shipped to my daughter. Bought new memory card and camera still does not recognize that a card is in it. When connected to computer I could see card but it had 0 used memory and 0 memory available. Now it does not show at all. Using canon software get same response--no memory card. Have tried with two different memory cards. Even formatted one card on PC, still nothing. Any ideas what to try next--pins look like they are all in correct place.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

Second Apple TV does not see network

i got an additional apple tv that has refused to see my network i have tried restarting both network and apple tv....changed location to see if signal strength was the issue .. but still only one of the apple Tv sees my network can anybody help!!!

DHCP is enabled on my network
Where? Do you have a router or some other network configuration? Could you describe a bit about your network? If you use a router, do you have its firewall activated, & any features like MAC filtering in use? Is the router's IP Address Pool (the range of IP addresses available for DHCP) restricted to just a few addresses or something unusual like that?
Are you certain the network name you entered is correct (no leading or trailing spaces or anything tricky like that)? If your network is password protected, are you entering the right password?
Can you be more specific about the error message -- does it really say "network (0)" for instance?

Wine Does Not See Network Printer

I have an hp wireless printer setup on my network. I added it in hplip and it is showing up on CUPS and works fine from everything in Arch.
This is what CUPS looks like:
Driver: HP Envy 4500 Series, hpcups 3.14.10 (color, 2-sided printing)
Connection: hp:/net/ENVY_4500_series?ip=192.168.2.242
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
When I try to print from Wine using Notepad, an error message pops and says
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer. Please install one and retry."
This is the error that displays in the prompt:
fixme:winspool:WINSPOOL_EnumPrintersW We don't handle PRINTER_ENUM_CONNECTIONS
Everything I have read says if the printer is on CUPS, wine should see it automatically. I am using the 64-bit OS. Any ideas?

My printer is also on wi-fi. In the past (under os-x) I always had some problems with the scanner - generally I would get a message "Failed to open a session on the device". It happened infrequently, usually after several days of having my mac on. I could fix the problem by login-out and in again or by changing to guest and then back again. However, with Maverick the problem with the scanner and error "failed to open a session on the device" always occurs. I can't print either - the printer queue says it can't connect to the printer. To answer your question regarding HP software... there is no HP software for the mac. I am using the MAC device drivers that were loaded when I connected my printer. I can print from my iphone/ipad through airprint... but can't seem to print from my mac with maverick.
I did logout and login yesterday to finally install the printer drivers. But today - I can't connect to the printer. BTW all other computers and devices can print to this printer.

Disk utility does not see network drive

I am trying to partition two NAS; however, they do not show up on disk utility but only the internal HD and a second external drive connected with USB.
I would appreciate ideas how to resolve this problem
Thanks

The Disk Utility isn't supposed to list network drives in its sidebar. Network drives can only be partitioned through disk images or software provided by the drive's manufacturer for that task(if any).
(61436)

OEL6.1 in VM manager does not see network card

Similar Messages

Maybe you are looking for