Officejet 4630 fax confirmation page

Is there a setting or other way for the Officejet 4630 to print a confirmation page after each fax showing whether the transmission was sent or failed
This question was solved.
View Solution.

Hi,
Yes fax confirmation can be print on all fax sent. Please follow steps below.
Setup Menu > Fax > Settings > Advanced Setiings > Fax Confirmation > Select the option as required.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • The fax confirmation report shows all zeros for officejet 6600 printer

    the fax confirmation page shows all zeors for date and time.  How do I set the printer so it prints the correct date and time?

    Hi CJChristian,
    Welcome to the HP Forums!
    I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
    Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
    Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
    Hope these guides are useful for you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp officejet 8610 fax sends out more pages than scanned - received partial output on remote end

    Hp officejet 8610 fax sends out more pages than scanned - received partial output on remote end

    Hi,
    How long is a page on the sender side?  If it is a long page like a legal page, it may end up in in 2 pages in the receiver side. Also check on the receiver end, if it is set to 'auto reduction - off' this may happen, try turning it "on".
    Also if the sender page is not a long page, try observing the paper that is going into the ADF, it should be 1 page at a time, if pages goes into the ADF continueously, it suggest that ADF is could be faulty.
    Set automatic reduction for incoming faxes (for HP printers only)
    The Automatic Reduction setting determines what the printer does if it receives a fax that is too large
    for the default paper size. This setting is turned on by default, so the image of the incoming fax is
    reduced to fit on one page, if possible. If this feature is turned off, information that does not fit on the
    first page is printed on a second page. Automatic Reduction is useful when you receive a Legal-size
    fax and Letter-size paper is loaded in the main tray.
    To set automatic reduction from the printer control panel 
    1. From the printer control panel display, touch and slide your finger across the screen and then 
    touch Setup. 
    2. Touch Fax Setup. 
    3. Touch Advanced Fax Setup. 
    4. Touch Automatic Reduction to turn on or off.
    Please click the "Thumbs Up", to say thanks for helping!
    Also, please consider marking my post as “Accept as Solution" if you feel my post solved your issue.
    I work for HP

  • HP Officejet Pro 8600 fax confirmation time and date fields has all zeros

     My fax confirmation sheet for the time and date of my HP Officejet Pro 8600 prints all zeros.  How do I reset the time and date for this function?

    Hello rschne,
    Welcome to the HP Forums.
    I see that you are having an issue with the date and time being all zeros on the fax confirmation.
    Is the time and date set on the front display of the printer?
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Write me back when you have time and I will be happy to assist further.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Officejet 4630 printer won't print web page google chrome windows 3

    HP 4630 officejet printer Google Chrome Browser Windows 8
    I can't print web pages or selections from a Web Page directly. I have to copy and paste into Adobe or OneNote.
    Not using wireless--direct hookup. Is this normal? any info  on steps I can take to print directly from a web page
    would be appreciate! thanks

    Hello stok60,
    Welcome the HP Forums!
    I understand you're unable to print from Google Chrome using the Officejet 4630. I will do my best to assist you! I would recommend following this document on Printing Problems With Google Chorme.
    If this document doesn't resolve your issue, then please try uninstalling Google Chrome by following this document here. Now, install the latest version of Google Chrome here.
    Have you tried a different Web Browser to see if you're receiving the same problem?
    Another option you can try is using Google Cloud Print since your printer has ePrint as an added feature. I will provide two documents to help you. This document tells you information on What is Google Cloud Print? This document tells you how to set up this feature here.
    Please post your results, as I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • Win10-Update, Null Fax - HP Officejet 4630 series - Error 0x80070490

    REF:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-4630e-driver-updates-via-windows-update-fail/td-p/3778226 REF:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Error-0x80070490-on-HP-windows-update/td-p/5007952
    Still have the same problem with Windows 10 Update:There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search
    the web or contact support for information, this may help:
    HP - Enterprise WSD Multi-Function Printer, Other hardware - Null Fax - HP Officejet 4630 series - Error 0x8007049 Used:
    http://windows.microsoft.com/en-ca/windows/windows-update-error-80070490#1TC=windows-7MS Fix software... found 1 error and fixed it But still cannot update, I have the same above error Jean3riv
    Rayonline.com
    [email protected] 

    having the same problem.  Installed windows 10 and not only will my printer no longer print wierlessly but  my phone and tablet no longer recognize my printer. the entire reasonw why i purcahsed this printer was to print wierlessly from my phone and tablet.

  • IR 6570 fax TX report or "confirmation page" comes out with zeros.

    Our office has a Image Runner 6570. It works fine, except for our Fax TX Report or confirmation page comes out with no info. THe Job No./ St. Time/ Usage T/ Pages all come out as zeros. The fax goes through to the reciepent, but we would like the cofirmation page to work as intended. We turned off the IR 6570, that didn't affect anything. We switched the Fax TX report seetings from off to error and on, but it still comes out as all zeros. 
    If anyone has had this issue or knows how to resolve it, a comment would be apreciated. 

    Hi CalebR!
    Thanks for posting in the Canon Forum! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.  

  • OfficeJet 4630 Defaults to Network Fax when user has selected Network Printer Instead on WIN XP

    Hi, just installed the OJ4630 and selected the "Network Printer" as the default.  When choosing to print an MS Word document in "My Documents" the "Network Printer" correctly appears as the default.  But when choosing to print a picture in "My Pictures" the "Network Fax" becomes the default, which is an error.  Please advise, thanks!

    Hi 
    Thanks for reporting the issue. Here is the way to fix it.
    Go to windows->Control panel-> Printers and devices
    Right click on the 4630 Fax Printer, select the option Set as default printer and you'll see two choices there: one is printer driver and other one is fax driver.   You choose print driver to set as default.
    Done
    Hope it will help you.
    happy Printing!!!
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Fax Confirmation Issue

    We have an Officejet Pro 8600 Premium that Fax Confirmations ith images on send is turned on. And appears to work just fine when physically faxing from the printer's feeder. But when faxing over the network through the HP Software no confirmation prints out. And we really need to have every fax sent print out a confirmation no matter how it gets sent to the printer. Is this a known issue, or is the way we have it set up supposed to do what we are wanting and the fact it isn't is outside of the expected behavior? Any info would be really helpful as we really need to have confirmations of our sent faxes.
    Thanks
    Hal
    This question was solved.
    View Solution.

    Hi Hal,
    A printed fax confirmation (either with or without an image of the first page) is only available for a dax sent from the device itself, a such is not available while sending a fax from the HP Fax Software.
    For the fax software you may only view the Fax Log from the software which include a list and the status of the last 30 fax jobs.
    To get a printed report you will have to send the fax from the device itself. This is the way any HP printer work by design, it is not an issue of the software.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet 4630 cannot install driver. Windows XP Sp3

    Good evening,
    I did purchase this printer earlier today and have been on this issue for a couple hours already. The box is not too far, and the printer might go back in soon !
    The printer is working fine, it has been connected to my router, the light is always on, it says connected to the wifi system. The wifi connection confirmation page has printed, everything is "Success".
    My problem is that anytime i try to install the drivers, the setup searches for a printer that is connected but not yet installed. It notices my printer with the good ip address, then copy a couple driver files and then tells me it fails to install the printer.
    The current setup is OJ4630_198, I've found an older version and tried it but pretty much the same results, except that before it stops the installation telling me it fails to do so, it ask me to locate the HP CD on my cd drive, searching for a fax setup installation .png but fails a second later.
    I'm pretty clueless, I've tried installing it manually but of course the selection of the Communication Port is somewhat tricky with a wire less printer.  I noticed there is a "Create a new port" selection available in which appears an option named "Hp Discovery Port Monitor (HP 4630 series)" which is oddly my new printer. Tried it but it doesn't work.
    I've reset my router, pc and printer several times, tried assigning my printer to a different port number, all ended with the same results. It connects to my wifi, but i cannot manage to install the driver for the printer.  So my printer list is empty atm..
    Thanks for any help,
    Much appreciated
    Windows XP Sp3
    Cisco router
    ZoneAlarm firewall..
    This question was solved.
    View Solution.

    Hi,
    Please Download and run the Printer doctor tool to find and fix your problem
    http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-135113-1/HPPSdr.exe
    If about doesn't work, try to add printer manually
    You can try few things which may help to resolve the issue
    1. Make sure your system is up todate. Do a windows update which helps to get alll latest update.
    2. Once step 1 done, restart PC and get the latest software from hp.com. You also can use HP installation wizard which help to get the latest software for you.
    http://ftp.hp.com/pub/softlib/software12/COL50403/​mp-122330-1/hppiw.exe
    3. If you still face the problem, you can do "Add printer wizard" manually. Here is the steps:
    1. Open Devices and Printers by clicking the Start button Picture of the Start button, and then, on the Start menu, clicking Devices and Printers.
    2. Click Add a printer.
    In the Add Printer wizard, click Add a network, wireless or Bluetooth printer.
    3. In the list of available printers, select the one you want to use, and then click Next. (If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.)
    4.If prompted, install the printer driver on your computer by clicking Install driver. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    5 Complete the additional steps in the wizard, and then click Finish.
    Now you can start printing...
    Happy Printing.
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • My PC can't stand the connection to HP Officejet 4630 all-in-one printer

    Hi everybody,
    I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
    I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
    The problem is that if I reboot the PC or the printer, or both, i can' print no more.
    The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
    If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
    I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
    Is there someone that could help me?
    Thank you so much

    Hi @poporni,
    Welcome to the HP Forums!
    I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
    Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How do I fax multiple pages to one #

    The manual says I can fax multiple pages.  I fax one and I get a confirmation printed out.  I have many pages to send and I do not want to get a confirmation for each page.  I have turned off the confirmation feature. I do not know how to keep the fax going.  I have 70 pages to fax to one phone #.  Please HELP

    Hi,
    Please clarify your HP device model to provide you the steps accordingly.
    To add, sending such a large fax job will a long time and may get communication errors during such fax transmission.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet 4630 e-all -in-one-seeries

    I have been trying to print a recipe I have but my printer will not print.  I have turned it off and back on.  The blue light is solid.  The cable is connected.  When I push OK to print a black copy it hear a little chime (ding dong) but it will NOT print.  Please help me.

    Hi @Roleen,
    Welcome to the HP Support Forums! I see your HP Officejet 4630 will not print/copy your recipe, I would love to get your recipe printed/copied for you but I require a little more information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. Are you trying to print the recipe from the computer or trying to copy it from the printer?
    4. Where are you printing the recipe from, a web page or a saved file on the computer? If you are using the web which Browser? (IE, Mozilla etc)
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Officejet 4630 e-All-in-One Printer Black Ink not Working

    My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

    Hello @3oshua,
    Welcome to the HP Support Forums!  I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
    I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Windows XP can't connect to OfficeJet 4630 during installation

    Just bought a new OfficeJet 4630 and am very excited to use its wireless features. I got it connected to our in-home wireless router (Netgear) very easily, typing the WEP key right into the printer's keypad. I was subsequently able to install it on my DELL Latitude, from which I can print wirelessly or plugged in to USB, as well as cloud printing and ePrinting. Test pages, alignment pages, etc., all have printed just fine. My wife's acer netbook is another story. She's running Windows XP and has hit a major snag in the installation process. Whether we install the software and drivers from the internet download location specific to the OfficeJet 4630 or with the included CD, it makes it past the step of installing software but encounters an error when it is time to connect to the printer. The software has us choose whether to connect wirelessly, over USB, or later, and following the on screen instructions for either wireless or USB leads to the same error: The computer is unable to connect to the printer at this time.
    During installation, when we choose to connect wirelessly and the installation software shows us a list of network printers to choose from, the OfficeJet shows up and we can select it - we can also find it by typing in the IP Address (10.0.0.9) into the Advanced Search bar. We can type the IP address into the web browser and see the printer's EMS and edit various options. We've made sure that my wife's computer is on the Workgroup MSHOME (since I read somewhere that OfficeJets only like to work on that workgroup and not any others). I've followed every other possible instruction given by either HP or these forums (disabling firewalls, startup services, uninstalling and re-installing HP software, etc.) and still, every time, a connection error whether we use Wi-Fi or USB.
    We are getting really desparate to use this beautiful machine to its fullest potential - someone please help!

    What is the IP address of your modem?  What is the IP address of the router?  With a 10.x.x.x IP tells me you may have a double NAT situation at home.  This basically means your router will change it's IP to 10.x.x.x because it's default IP is the same as the modem. Connect just to your modem and what is the IP?  Now connect JUST your router, no other connection to the modem, and what is it's IP? 
    You can use a cmd prompt and just type in ipconfig.  What is listed as the Default Gateway for both?
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for