Officejet 6700 on Windows 7 - HP Solution Center

HP Solution Center does not recognize my Officejet 6700 Printer. My first thought was to uninstall and reinstall HP Solution Center. How do I get a copy to reinstall. Or, if there is an easier solution, I'd like to know abou it. Thank you, Sandy
This question was solved.
View Solution.

Hi Sandy,
The HP Solution Center is part of the software provided for older HP products, It is not part of the HP Software for the 6700 and cannot be used with the specific model.
You may access the software by clicking the Windows icon ( ), click HP , click All Programs , click the HP Officejet 6700 folder, then click the HP Officejet 6700 icon. The printer software opens.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Problem getting HP Officejet J4680 to show up in Solution Center

I changed my router to a Netgear WNR2000 v3, and now I can't get my HP Officejet J4680 to show up in Solution Center. I can print to it, but I now have no way of scanning to files. I've tried uninstalling/reinstalling both software and the printer, but I still can't get it to show up. I've also reset the printer to factory defaults and changed the IP address as suggested.
I also discovered that Document Manager won't open.
Please help.

It is an iTunes problem
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Upgraded from hp f2400 to oficejet 6600/6700 how to use HP solution center with new equipment?

I was using the HP F2400 all-in-one copier. I just upgraded to the HP OfficeJet 6600/6700 all-in-one. I want to upgrade the HP Solution Center or install another Solution Center for my new copier. How can I make this happen. My operating system is Windows 7. To me the Solution Center is the best way to find/track all documents, scans, pictures and everything else. Please help.

If you are done with the f2400, I recommend going to Start > All Programs > Hewlett-Packard > [your printer model] and uninstalling the software using the uninstaller in that folder.
Restart your PC.
Download and install the software for your new printer from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-101682-1&cc=us&dlc=en&lc=en...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet 4500 driver not installing HP Solution Center fully-so can't scan

New laptop w/ Windows 8....Have installed the right driver...but the driver isn't downloading the HP Solution Center suite, so I can't instruct the HP Officejet 4500 to scan. Printer is communicating w/ laptop. I don't use the online fax options, but am sure they wouldn't work either.
How do I get the driver to fully install the HP solution center so I can instruct the device to scan????

CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
Now what?

Mac can not connect to OfficeJet 6700 while windows machine can ...

Hello all.
I have an HP Officejet 6700 for more than a year. It is connected to a wireless network (Netgesr wireless router), both Mac an Windows PC printing and scanning successfully until yesterday…
Since yesterday the Mac cannot print or scan, while windows machine still works fine …
Mac OS version is 10.9.4
I changes the printer from DHCP to static IP, I deleted the printer from the Mac and installed it again from the HP site but at the HP Utility I get stuck in the Add Officejet 6700 (08B0D2) Bonjour Multifunction with an “Unable to communicate with the printer at this time” error message.
Again all of this while windows machines communicate and work perfectly fine.
Any idea?

Hi @AmitFish,
Welcome to the HP Support Forums! I see you are not able to connect your HP Officejet 6700 Premium to your Mac, everything was working fine and all of a sudden you get a communication error.
I would first like you to make sure you have installed all Mac updates, please run the updates and let me know if this helped?
If not, please complete the steps listed here: Printer Does Not Maintain Wireless Connection, I know you have previously set a Static IP, please continue and let me know the outcome.
I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Windows 8 - Lenovo Solution Center claiming problem wih disabled printer (but it's not disabled)

I have an HP printer for which I needed to replace the stock Windows 8 printer driver with HP's full featured driver. Since I did that, Lenovo Solution Center [LSC] complains (under Check-up> Device Manager) that "one or more devices have problems" and it lists my Officejet 4500 G510n-z as "disabled". When I go to device manager to check the status of my printers, I see a print queue category of devices, and all of them, including the two associated with the printer, are enabled and "working properly".
Under what circumstances does Solution Center determine that a device is disabled? How do I convince Solution center it is making the wrong assessment ;-)....or perhaps there is something wrong but looking at Device Manager doesn't tell me so??? Is there another place I should check?
I finally solved the wan miniport problem (thanks to other posters), so now I have 1 problem left to fight to be able to rid myself of unwarranted exclamation marks from LSC.

I have same problem after completely installing the HP full solution driver and application support for the printer. It's the "Multifunction Adapter" category in Device Manager that causes LSC to show the error. I already have a Z: Sendto device that corresponds to the SD Card for the printer, but have nothing inserted. If I attempt to Update Driver for the multi-function adapter, it's not finding driver on Internet (Windows Update) and not finding a signed driver for Windows 8 under Update Driver, Printer driver support if you choose the locate on c: drive and point to the correct HP printer. Interesting also, I have three "discovered" HP printers, all showing "Disabled" Multi-Function adapters under Device Manager by LSC.

Windows 7 & HP Solution Center

I have a brand new Compaq PC with Windows 7 64bit which I want to connect via ethernet cable and my router to an HP C6380 All-in-One printer. I have downloaded the latest version of HP Solution Center, 130.0.44.62, and initially everything was working.
However every time I restart the PC and try to open Solution Center I get the message that the printer installation is incomplete and I have to run it all again. The printer is still showing in Printers and will print okay. The C6380 is not recognised by the Win7 scanning feature so I cannot use that as an alternative scanning option.
I am losing the will to live, do I really have to reinstall the software every time I want to use it on Win7? I did not have this problem on any XP or Vista machines.

I have exactly the same problem on my Win 7 64 bit. My printer is an HP Photosmart Premium C309a series. Can a tech tell me why this is happening? Is there a bug and we need to wait for a fix? Is there another program stepping on this? Please, someone at least direct me to the page that tells me how to uninstall and re-install correctly, that may be my problem. Thanks.

Officejet pro l7580 cannot reinstall hp solution center

I have a Win 7 Home Premium w/SP1, MS updates current to 5/27/2014
I wireless connect to Officejet Pro L7580. We have Verizon FIOS & wireless phones.
The L7580 is connected via Ethernet to a 2nd PC w/ Win 7 Home Premium w/SP1 & fairly current MS updates.
I have been using the above setup for 2+ years along with HP Solution Center for scanning, printing from either PC without any problems.
Then I upgraded the Verizon router to have WPA2 security about 6/2/14. I am able to print as I have done before but HP Solution center gave me an error msg:
Solution Center cannot run because installation is not complete. Would like to be able to post a jpg.
1. Based on some review of forums, I reinstalled the L7580 using complete download, rebooted - received same error msg when openning HP Solution Center.
2. I uninstalled HP Solution Center, rebooted. Installed the complete L7580 packge, rebooted. HP Solution Center was not installed. Can print as I have before.
I need some help,
Thanks much,
Ken
This question was solved.
View Solution.

Hello Ken I hope you're well!
I saw your post about Solution Center not functioning for you since you upgraded to WPA2 security on your router. If you switch the security to WPA personal, that should help.
Let me know the results!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP OFFICEJET 6700 w/windows 8.1 OFFLINE OFFLINE OFFLINE !

Help
Constantly losing ability to print. Uninstalled and Reinstalled printer. Made sure not set to "offline" and it IS set as the default printer. Am using a wireless connection. Printer is new. Used installation disc for the driver...is there a better online driver that I need? Any ideas?

Hello Acelestialsoul,
Welcome to the HP Support Forums. I understand that after installing a driver from the installation CD that you are unable to communicate with the printer as it is showing as offline.
Since you are using Windows 8.1 have you Tried the HP Print and Scan Doctor for Windows? The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues.
If that doesn’t find any issues, please Uninstall the Printer Software. I would recommend removing all the HP software. Once the software has been uninstalled please reinstall the software using the steps for a Windows 8 install. I would recommend using the HP Printer Install Wizard. For more information about the Printer Install Wizard please refer to How Do I Find the Best Windows 7 or Windows 8 Driver for My Printer?
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Photosmart 4740 on 64-bit Windows 7: HP solution center can't find device

I have followed all recommendations in the help section. It shows on wireless network & prints w/o issue. Reinstalled all software. Made sure HP network devices support is started. Run all diagnostic utilities (no issues). Found this error when HP update attempted to install firmware for frozen touchpad (which had originally been installed months ago). Please help!

Uggh. Sorry.
Let's start over.
1. Go to Start > All Programs > Hewlett-Packard > Photosmart C4700 series and run the uninstaller to remove the software.
2. Restart your PC.
3. Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When it begins the installation, choose "Wireless" or "Network" installation type. Your printer is already on the network and it shoud find it there. If it does not, run this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Windows 10 support for officejet 6700

Is there any HP printer support/drivers for the OfficeJet 6700 for Windows 10 Enterprise?
This question was solved.
View Solution.

Hi,
Windows 10 is still in its beta stage, any drivers will not be provided prior the operating system release.
From my experience the Windows 8.1 drivers should work fine, I suggest giving it a try:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109007-3&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet pro 8500 a909g wireless will not open solution center saying device install not complete

Operating system is Windows 7 64-bit. When I try to open Solution Center I get a black window saying "HP Solution Center cannot run because your device installation is not complete." My printer is wireless so there is no USB so I unplugged the printer, removed the printer, rebooted, went to Print Server Properties then Driver and removed the driver still there. Then I downloaded the HP Full Software and Driver for my printer and got a "successful install". Then I plugged the printer in, added the printer, and still have the same error. Any suggestions?

What brand of computer do you have? I'm asking because I think you need a L3 uninstall, but if you have an HP computer, it can remove things the computer needs to run and cause the whole system to crash.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Solutions Center patch won't work. Windows 7 from Vista. C6280.Red

I have a Dell Inspiron (Windows 7) and a C6280 on red with my husband's Hp Pavillion lap (Vista). When I click Solutions Center to scan, a pop-up tells me I cannot do that just because. I have a CD for Vista since the lap is older than the Dell, when I try it Windows tells me to forget it. Then a window tells me Solutions Center won't work because I never finished installing something or "other". If they mean PS_AIO_02_NetWired-FullWin_WW-130-140 I installed it 4 times. "Others" were many. When I try the patch (dot4patch_reboot.exe) it immediately reboots and... nothing else. For rebooting my computer I don't need a patch, I'm obstruse but not that much. This is the 4th day I'm working at this and I'm desperate. I'm thinking of throwing the whole rubble out of the window. In case I change that for myself: would a kind soul help me with this mess, please, please, pretty please? You might have noticed I'm not very good at this kind of problem. Therefore I have something extra to ask: make it simple? Like Forums for Dummies? Thank you so very much. Whether you can help me or not you had the patience to read all this. Bless you.

RitadeCasia,
I am sorry it is not working.
This part of your statement concerns me:
"Only new happening today was an HP window offering downloads, erasings and so forth with the image of a lovely Oriental girl."
This Update message is not from HP. HP does not offer any updates while showing the image of any lovely person.
You might consider the following:
The system may be infected with a Virus (corruption causing software) or Malware (essentially an unwanted or malicious program)
Use your best Anti-Virus software and run the best, deepest scan that is offered. When the first scan is complete, run your Anti-Virus again.
Anti-Virus Software packages
If you do not have Anti-Virus software, or if you need recommendations:
Avast Anti-Virus   NOTE: You may select the free version. Avast "plays well with others: it gets along with Windows Defender (the Microsoft Anti-Virus that comes standard on your computer.
Recommendations provided by Microsoft for Anti-Virus software that works well with Windows 7 and most probably with Vista as well:
Windows 7 consumer security software providers
Malwarebytes software can help pull out, that is, it can extract and destroy those programs that do not belong on your computer. Download and install the Free Version. You might run it at least one time, perhaps twice.
Malwarebytes Anti-Malware Free
After each time the computer is scanned, reboot / restart your computer and log in.
======================================================================================
File System Scan -- sfc
Assuming the computer is considered "cleaned" of unwanted virus and malware software, you might next complete a system Scan to help make sure the File System is healthy:
Using System File Checker (SFC) to Restore System Files
System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Wi...
The sfc scan can be run more than one time to make sure it catches everything it can find.
After the sfc scan completes, try your installations again.
======================================================================================
New Backups -- System Recovery
After the scans are completed and you are fairly confident that the system is clean, you will want to create a new backup of your personal data.   This is a backup of your Account, files, and any "extra" folders that you have created that is not part of the Vista Operating System.
You do not want to over write any previous backups this time. Example: If you have a backup of your data on a USB stick that you made last month, two months ago -- or any time before the problems began, then you should KEEP that older backup and make a new backup on a different USB drive.
In other words: You need to make new backups -- but you may not yet be able to trust them 100%; keep the older backups along with the new ones. IF you end up having to run a full Recovery on the computer, you will then have a choice about which personal backups to load after the recovery is complete.
Recovery
If you cannot fix the persistant problems on your computer, you may have to run a full Recovery to reinstall your Vista Operating System. Please READ all the following documents before you run a Recovery.
You may NOT need to run the Recovery if you can fix the problems and your computer is again "acting normally". I am providing the Recovery information in case you need it.
Reminder: A full Recovery is destructive -- the Recovery procedure removes your data, removes the Operating System, and then reinstalls Vista. You must then complete additonal Recovery steps to load your personal data into place on the computer. **
** The exception: IF you have created (previously) a full IMAGE backup, you can use it to restore your computer to that exact condition. A full Image contains not only the Vista OS, it also contains all your personal data, your programs, and everything else that was on the main disk when the Image was created.
If you do not already have an Image, you will be using other means to Recover the system back to working order.
Documents to Help with Backups and Recovery
The first document shows you how to use the computer's programs to make personal backups.   This is not the Recovery procedure -- it is something you do BEFORE you run the Recovery. This procedure is related to Recovery in that it is preparation work you do ahead of time to protect your data.
Reminder: Do not overwrite your previous backups -- IF your system is infected AND the Anti-Virus programs cannot completely fix the problem, then you still need to make backups, but you also need to understand that they may not be 100% safe or complete. You can use the new backups, just know that IF they are later found to be infected, you will be depending on your older backups to restore your personal data -- you need to keep both old and new personal backups on hand and ready to use.
Use Windows Basic Backup and Restore Center to Back Up Files in Vista
The above doc calls:
How to Back Up Your Files (Windows Vista or XP)
This document shows you how to run the Recovery procedure -- this is the "destructive part" that removes and then reinstalls Vista.
Recover Windows Vista Operating System Using HP Recovery – Notebooks
This document explains what steps are necessary to completely restore your computer after you complete the initial Recovery of the Vista Operating System: installing personal programs (Firefox) and personal files (your personal documents and pictures).
NOTE that you will need on hand: Downloads or CDs of your programs that are not part of Vista. For example, if you have installed a Photo Editing software, you will need to reload it after the Recovery.
HP Notebook PCs - Setting up Your PC After a Recovery (Windows Vista)
=====================================================================================
And, Good Luck!
Kind Regards,
Dragon-Fur

Switching network printers for HP Solution Center

I have two network printers (HP Officejet Pro 8500 All-in-one) installed in my office. When I downloaded the latest version of HP Solution Center for Window 7, the Solution Center connected to the secondary network printer in my office, not the printer I use. Any suggestions on how to switch the printer that HP Solution Center connects to? Thanks.

I would try 2 things here...
1. Make sure that the printer you want to install the new sortware for is set as the default printer.
2. Reinstall the software with the secondary printer turned off.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Officejet 6700 premium scan to pdf

officejet 6700 premium scan to pdf - solution posted says download newer driver. Will new driver work with XP?

CarolBZ
Welcome to the HP Community Forum.
Well, the package Description does say the Full Feature Software is available for XP -- but you have to install the software to be sure. Smiling.
Before you apply any changes to your computer, always create a Restore Point:
Create a System Restore Point in Windows XP
Later, should you need to do so, you can "go back" to where you were:
How to restore Windows XP to a previous state
==============================================================================
Instructions and help to install the printer software:
Install Full Feature Software – OfficeJet 6700
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Officejet 6700 on Windows 7 - HP Solution Center

Similar Messages

Maybe you are looking for