OFS add standalone database to group error
I was installing OFS 3.3.3 with Oracle 10g R2 on 2 win2k3sp1 servers. The standalone database instance could be startup at each node respectively without any issue.
The standalone database verification ran successfully. (I failover the data files to the second node, and verify that I can start and connect the same database instance, maybe I missed any configuration in registry or somewhere on node2?)
But when I tried to add the resource to the cluster group, I got following error:
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "OLTP.WORLD" to group "OLTP"
Starting Time: Dec 10, 2006 22:02:09
Elapsed Time: 0 minutes, 25 seconds
1 22:02:09 Starting clusterwide operation
2 22:02:10 FS-10370: Adding the resource OLTP.WORLD to group OLTP
3 22:02:10 FS-10371: ORAFS01 : Performing initialization processing
4 22:02:11 FS-10371: ORAFS02 : Performing initialization processing
5 22:02:14 FS-10372: ORAFS01 : Gathering resource owner information
6 22:02:14 FS-10372: ORAFS02 : Gathering resource owner information
7 22:02:14 FS-10373: ORAFS01 : Determining owner node of resource OLTP.WORLD
8 22:02:14 FS-10374: ORAFS01 : Gathering cluster information needed to perform the specified operation
9 22:02:14 FS-10374: ORAFS02 : Gathering cluster information needed to perform the specified operation
10 22:02:14 FS-10375: ORAFS01 : Analyzing cluster information needed to perform the specified operation
11 22:02:15 >>> FS-10652: ORAFS01 has Oracle Database version 10.2.0 installed in ORADB10G_HOME1
12 22:02:15 >>> FS-10652: ORAFS02 has Oracle Database version 10.2.0 installed in ORADB10G_HOME1
13 22:02:15 FS-10376: ORAFS01 : Starting configuration of resource OLTP.WORLD
14 22:02:15 FS-10378: ORAFS01 : Preparing for configuration of resource OLTP.WORLD
15 22:02:15 FS-10380: ORAFS01 : Configuring virtual server information for resource OLTP.WORLD
16 22:02:15 > FS-10496: Generating the Oracle Net migration plan for OLTP.WORLD
17 22:02:16 > FS-10490: Configuring the Oracle Net listener for OLTP.WORLD
18 22:02:16 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
19 22:02:16 >> FS-10606: Listener configuration updated in database parameter file: m:\spfileoltp.ora
20 22:02:20 >> FS-10605: Oracle Net listener Fsloltpd created
21 22:02:21 >> FS-10602: Oracle Net listener LISTENER restarted
22 22:02:21 > FS-10491: Configuring the Oracle Net service name for OLTP.WORLD
23 22:02:21 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\TNSNAMES.ORA
24 22:02:21 FS-10381: ORAFS01 : Creating the resource information for resource OLTP.WORLD
25 22:02:21 > FS-10424: Checking whether the database OLTP.WORLD is online
26 22:02:31 ** ERROR : ORA-01506: missing or illegal database name
27 22:02:31 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource OLTP.WORLD
28 22:02:31 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
29 22:02:31 ** ERROR : FS-10497: Starting clusterwide rollback of the operation30 22:02:31 FS-10488: ORAFS01 : Starting rollback of operation31 22:02:31 > FS-10090: Rolling back Oracle Net changes on node ORAFS01
32 22:02:34 FS-10489: ORAFS01 : Completed rollback of operation
33 22:02:34 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
34 22:02:34 Please check your Windows Application log using the Event Viewer for any additional errors
35 22:02:34 The clusterwide operation failed !
The DB_NAME is already stated in the spfile, but why still got "ORA-01506: missing or illegal database name" error?
How and where can I find out any other detailed information about the error?
thanks, ezlee
Hi,
Did you manage to get past this error?
Did you set DB_NAME in the init.ora file as per the message for ORA-01506?
Regards,
Ranjit
Similar Messages
-
Adding Standalone Database to Group using Fail Safe fails
Background:
Oracle: 10.2.0.4
OFS: 3.4.1
Have installed Oracle Fail Safe correctly without errors.
Ran Verify Standalone Database get this result:
27 10:00:04 > FS-10345: Verification of standalone database MYDB completed successfully
28 10:00:04 FS-10917: Server01A : Standalone resource MYDB was verified successfully
29 10:00:04 FS-10378: Server01B : Preparing for configuration of resource MYDB
30 10:00:04 FS-10916: Server01B : Verification of the standalone resource
31 10:00:04 > FS-10341: Starting verification of database MYDB
32 10:00:04 > FS-10342: Starting verification of Oracle Net configuration information for database MYDB
33 10:00:04 > FS-10496: Generating the Oracle Net migration plan for MYDB
34 10:00:04 > FS-10491: Configuring the Oracle Net service name for MYDB
35 10:00:04 > FS-10343: Starting verification of database instance information for database MYDB
36 10:00:04 > FS-10344: Starting verification of Oracle Intelligent Agent for database MYDB
37 10:00:04 > FS-10345: Verification of standalone database MYDB completed successfully
38 10:00:04 FS-10917: Server01B : Standalone resource MYDB was verified successfully
39 10:00:04 The clusterwide operation completed successfully, however, the server reported some warnings.
The warnings are concerning dome files that are on the D: drive as oppose to one of the Shared Drives. I made that that the SPFILE and init.ora are on the o1B node and in the same exact Path.
I did create a Group with a Virtual Address and added the Shared Drive resources
When I run the "Add to Group" wizard, I have tried using both the SPFILE and the 'init.ora' and get the same result:
20 10:02:58 >> FS-10605: Oracle Net listener Fslmydbdb created
21 10:02:59 >> FS-10602: Oracle Net listener LISTENER restarted
22 10:02:59 > FS-10491: Configuring the Oracle Net service name for MYDB
23 10:02:59 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\TNSNAMES.ORA
24 10:02:59 FS-10381: Server01A : Creating the resource information for resource MYPLM
25 10:02:59 > FS-10424: Checking whether the database MYDB is online
26 10:03:07 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource MYDB
27 10:03:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 10:03:07 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 10:03:07 FS-10488: Server01A : Starting rollback of operation
30 10:03:07 > FS-10090: Rolling back Oracle Net changes on node Server01A
31 10:03:10 FS-10489: Server01A : Completed rollback of operation
32 10:03:10 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
33 10:03:10 Please check your Windows Application log using the Event Viewer for any additional errors
34 10:03:10 The clusterwide operation failed !
I have checked the README files and looked up the FS- Errors, but they are very general and don't give me a clue as towhy they failed.
Have been Googleing for days and found no answer yet. Are there any other logs that might shed some light on this?
Thanks and have a great day,
AndrewAdditional info.....here's wha tI found on the D:\oracle\product\10.2.0\db_1\log\Server01a\client logs:
clsc78.log
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-05-27 13:12:43.942: [ OCROSD][2272]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:43.942: [ OCRRAW][2272]proprinit: Could not open raw device
2009-05-27 13:12:43.942: [ default][2272]a_init:7!: Backend init unsuccessful : [33]
2009-05-27 13:12:43.942: [ CSSCLNT][2272]clsssinit: error(33 ) in OCR initialization
2009-05-27 13:12:45.036: [ OCROSD][2272]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:45.036: [ OCRRAW][2272]proprinit: Could not open raw device
2009-05-27 13:12:45.036: [ default][2272]a_init:7!: Backend init unsuccessful : [33]
CSS41.log
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-05-27 13:12:50.833: [ OCROSD][3508]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:50.833: [ OCRRAW][3508]proprinit: Could not open raw device
2009-05-27 13:12:50.833: [ default][3508]a_init:7!: Backend init unsuccessful : [33]
2009-05-27 13:12:50.833: [ CSSCLNT][3508]clsssinit: error(33 ) in OCR initialization
Related? To me it looks like it initilaizes everything, stop the Database, but then can't startup?
Thanks..
Andrew -
Fail Safe adding database to group gives error "FS-10006: Unable to open.."
Environment:
Fail Safe 3.4.2
Oracle 11.2.0.1 64bit
Windows 2008 Server 64bit
Two nodes in an active/passive cluster using windows clustering and oracle fail safe.
Problem:
We have created the windows cluster, installed fail safe on both clustered nodes, installed the database software, verified the cluster, created a group and added a virtual address to the group. We also managed to verify the stand alone database instance without any issues. However, when we try to add the database to the group we get the following errors:
Versions: client = 3.4.1 server = 3.4.2 OS =
Operation: Adding resource "THORD" to group "EO_THORD_GRP"
Starting Time: Jul 26, 2010 16:23:04
Elapsed Time: 0 minutes, 2 seconds
1 16:23:04 Starting clusterwide operation
2 16:23:05 FS-10370: Adding the resource THORD to group EO_THORD_GRP
3 16:23:05 FS-10371: ClusterNode1 : Performing initialization processing
4 16:23:05 FS-10371: ClusterNode2 : Performing initialization processing
5 16:23:05 FS-10372: ClusterNode1 : Gathering resource owner information
6 16:23:05 FS-10372: ClusterNode2 : Gathering resource owner information
7 16:23:05 FS-10373: ClusterNode1 : Determining owner node of resource THORD
8 16:23:05 FS-10374: ClusterNode1 : Gathering cluster information needed to perform the specified operation
9 16:23:05 FS-10374: ClusterNode2 : Gathering cluster information needed to perform the specified operation
10 16:23:05 FS-10375: ClusterNode1 : Analyzing cluster information needed to perform the specified operation
11 16:23:05 >>> FS-10652: ClusterNode1 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
12 16:23:05 >>> FS-10652: ClusterNode2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
13 16:23:05 FS-10376: ClusterNode1 : Starting configuration of resource THORD
14 16:23:05 FS-10378: ClusterNode1 : Preparing for configuration of resource THORD
15 16:23:05 FS-10380: ClusterNode1 : Configuring virtual server information for resource THORD
16 16:23:05 ** ERROR : 0x138F: The cluster resource could not be found.
17 16:23:06 ** ERROR : FS-10006: Unable to open the resource
18 16:23:06 ** ERROR : FS-10012: Failed to bring the cluster resource online. Check the Windows event log for messages
19 16:23:06 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource THORD
20 16:23:06 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
21 16:23:06 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
22 16:23:06 FS-10488: ClusterNode1 : Starting rollback of operation
23 16:23:06 FS-10489: ClusterNode1 : Completed rollback of operation
24 16:23:06 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
25 16:23:06 Please check your Windows Application log using the Event Viewer for any additional errors
26 16:23:06 The clusterwide operation failed !
FS-10006: Unable to open the resourceAll the cluster resources seem to be online. We're all out of ideas here, can someone please shead some light on this or have any ideas how we can go on about this.
Your help is highly appreciated.
ThanksI am getting into the issue (step-6) when I run standalone resource verify after successful step-5 and need your advice.
I will give you information about the infrastructure -
NODE1-2K8-ORADBND1
NODE2-2K8-ORADBND2
Cluster IP-
Virtual IP on NODE1 and NODE2 host file -
OS - Windows 2008 R2 64 bit
Oracle Database - 11gR2
Oracle FailSafe - 3.4.1.6
Oracle SID- ORA11
(ORA11 is up and running on NODE1 active node while running add to group option from - Groups/Standalone Resources to verify the instance and it gets error)
Here is the error log -
Versions: client = 3.3.3 ; server = 3.4.1 ; OS =
Operation: Adding resource "ORA11" to group "Available Storage"
Starting Time: Sep 02, 2010 12:50:06
Elapsed Time: 0 minutes, 1 seconds
1 12:50:06 Starting clusterwide operation
2 12:50:06 FS-10370: Adding the resource ORA11 to group Available Storage
3 12:50:06 FS-10371: 2K8-ORADBND1 : Performing initialization processing
4 12:50:06 FS-10371: 2K8-ORADBND2 : Performing initialization processing
5 12:50:07 FS-10372: 2K8-ORADBND1 : Gathering resource owner information
6 12:50:07 FS-10372: 2K8-ORADBND2 : Gathering resource owner information
7 12:50:07 FS-10373: 2K8-ORADBND1 : Determining owner node of resource ORA11
8 12:50:07 FS-10374: 2K8-ORADBND1 : Gathering cluster information needed to perform the specified operation
9 12:50:07 ** ERROR : FS-10791: The Oracle Database resource provider failed while gathering cluster information for resource ORA11
10 12:50:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
11 12:50:07 Please check your Windows Application log using the Event Viewer for any additional errors
12 12:50:07 The clusterwide operation failed !
Thanks for your help! -
DBA studio: Error add/connect database "Failed to parse tnsnames.ora file"
I have Oracle (version 8.1.7) installed in my XP machine and when I try to (having chosen "Launch DBA Studio standalone") to open a connection I get:
"Failed to parse tnsnames.ora file
ERROR: 100 -- NLNV-NLNV String Format Error".
Also got this when I tried to manually add a database to a tree.
I can access the databases listed in my tnsnames.ora using SQL Plus with no error.
This is my tnsnames.ora.
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = buch3ora)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MyOra3.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora3)
OORCL.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 3.4.55.66)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = oorcl))
Does anybody have any idea what is wrong? Thanks a lot. ChangsongJust found out this IS a string error in my Tnsname.ora. What i did is deleting all the entries in my tnsname.ora, and start adding each one back. I found one particular entry is responsible for the error. This is the old text
serv32.xxx.ge.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = TCP)(PROTOCOL = TCP)(HOST = sevr32.xxy.ge.com)(PORT = 1521))
(CONNECT_DATA = (SID = atmo32))
just looking by itself I can't see anything wrong. I just formatted it a little, making it looked like the other one that is working
serv32.xxx.ge.com =(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = TCP)
(PROTOCOL = TCP)
(HOST = sevr32.xxy.ge.com)
(PORT = 1521)))
(CONNECT_DATA=
(SID = atmo32)))
and now it works fine. I Really can't tell the difference, except that some words were moved to the other line. What puzzled me is that the same old tnsname.ora worked in almost all the other circumstances, like sql plus, and other database enginee. But it is just not good enough for dba studio?
I admit I probably should have used the network utility to add a connection to avoid this type of format error.
Anyhow, I'm glad it is solved. by the way, the symjct.dll mentioned in the previous post should be symcjit.dll. I guess he mispelled the name. I renamed it to symcjit_old.dll and now the java error was gone. So that is another gain from this post. Thanks Joel for all the information. -
ORA-20600 error while trying to add RAC database
I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
ORA-20600: The specified target is in the process of being deleted
This database doesn't exists in targets. But, I'm still unable to add.Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
You need to wait for a while and check the status. -
Trying to add a database in DBA studio: getting NLNV String format error
I'm trying to add a database in DBA studio, but I'm getting the following error:
Failed to parse tnsnames.ora file
Error: 100 -- NLNV-NLNV String Format Error
Does anyone know what I need to do? Thanks.Anybody see this before? Yes I have several times, but till today I have not found an answer. Someone from Oracle can help us??
Thanks
Chenthil -
Database not found/Error: ORA-16621: database name for ADD DATABASE must be
I am new to Data Guard and am trying to set up Data Guard Broker. I had created a configuration file with both my primary and standby databases and at one time I could show both databases. But now I can no longer show the standby database nor can I enable, disable or reinstate it. Here is what I have:
Primary Database: orcl10g
Standby Database: 10gSB
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose orcl10g
Database
Name: orcl10g
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
orcl10g
Properties:
InitialConnectIdentifier = 'orcl10g'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '10gSB, orcl10g'
LogFileNameConvert = '/oracle/oracle/product/10.2.0/oradata/orcl10g/redo01.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo01.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo02.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo02.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo03.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo03.log'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'remarkable.mammothnetworks.com'
SidName = 'orcl10g'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521))'
StandbyArchiveLocation = '/oracle/flash_recovery_area/orcl10g/archivelog'
AlternateLocation = ''
LogArchiveTrace = '1024'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> remove database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> reinstate database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> enable database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> add database '10gSB' as
connect identifier is 10gSB
maintained as physical;Error: ORA-16621: database name for ADD DATABASE must be unique
Failed.
How can I get Data Guard to see the standby database correctly again?Thank you for the constructive feedback. I have been able to make progress on this issue.
I did check the Data Guard Log files as you suggested. I did not find anything when I checked them before but this time I found the following:
DG 2011-06-16-17:23:18 0 2 0 RSM detected log transport problem: log transport for database '10gSB' has the following error.
DG 2011-06-16-17:23:18 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "10gSB" has an error
DG 2011-06-16-17:23:18 0 2 0 NSV1: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 0 RSM0: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
I verified that I am able to connect to both the primary and standby databases via external connections:
-bash-3.2$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 17-JUN-2011 12:41:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 17-JUN-2011 01:40:30
Uptime 0 days 11 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521)))
Services Summary...
Service "10gSB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_DGB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_XPT" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl10g" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10gXDB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_DGB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_XPT" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
The command completed successfully
-bash-3.2$
-bash-3.2$
-bash-3.2$ sqlplus system/dbas4ever@orcl10g
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ sqlplus system/dbas4ver@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress <== I think this is normal since the database is in mount mode
Enter user-name:
I also checked the listener log file and did see and error associated with a known bug:
WARNING: Subscription for node down event still pending
So I added the following to the listener.ora file and bounced the listener:
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
That seems to have taken care of the error.
The following is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC = ( GLOBAL_DBNAME = 10gsb_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = 10gsb.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
I again tried connecting externally to the standby database:
-bash-3.2$ sqlplus system/dbas4ever@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 13:09:00 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
and see this in the listener.log file:
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11357)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11358)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:24 * service_update * 10gSB * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25119)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25120)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=emagent)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25121)) * establish * orcl10g * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11420)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11422)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:24 * service_update * 10gSB * 0
I tried again to see the database in Data Guard Broker:
DGMGRL> show database 10gSB
Object "10gsb" was not found
however, I then was able to add the database in Data Guard Broker:
DGMGRL> add database 10gSB
as connect identifier is 10gSB
maintained as physical;Database "10gsb" added <== this is progress!!!
However the configuration shows the following:
DGMGRL> show database 10gSB
Database
Name: 10gsb
Role: PHYSICAL STANDBY
Enabled: NO
Intended State: OFFLINE
Instance(s):
10gSB
Current status for "10gsb":
DISABLED <=====
So I tried to enable the database:
DGMGRL> enable database 10gSB
Error: ORA-16626: failed to enable specified object
Failed.
and I tried to reinstate the database:
DGMGRL> reinstate database 10gSB
Reinstating database "10gsb", please wait...
Error: ORA-16653: failed to reinstate database
Failed.
Reinstatement of database "10gsb" failed
So I checked the configuration and now see two entries for the standby database but with case differences:
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
10gsb - Physical standby database (disabled)
Current status for "orcl10g":
SUCCESS
Question: How do I get rid of 10gSB and enable 10gsb? -
Automatically add a Database to an Availability Group
Dears, I need to know if there any way to configure SQL always on to automatically add new Databases to an Availability Group.
Ayman SalehHi can any one update the TSQL script here:
Requirements:
Every time the newly created or added databases should be full backed up once in the shared location with
automated script.
Newly created database should be added into always on group and should be added to available replica automatically
with the TSQL script -
Ora 12154 error when trying to add a database to VS Server Explorer
Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
EmadHi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad -
EP 6.0 SP9-- SP16 Upgrade error-"Unable to add account #0 to group"
Hello,
I am working on EP 6.0 SP9 Patch8.(Stand alone Java Only)
When I am trying to upgrade it SP 16, I am getting following error:
ERROR 2006-08-02 18:24:58
FSL-01006 Unable to add account <#0> to group <#1>. <#2>
ERROR 2006-08-02 18:24:58
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
Has any one came across this type of error?
Regards
Sunil Kulkarni
PS: Rewarding points will be given for helpful answer.Hello Romano,
Your answer is very helpful.
The user btit.com\shaadm is already a member of group "BTIT\Domain Users". Even though following log says it is not?
Could you please tell me how we can disable this check by modifying the XML file?
Start of Log----
<b>btit.com\shaadm is not member of group "BTIT\Domain Users"</b>
WARNING 2006-08-03 18:11:18
CJSlibModule::writeWarning_impl()
Existing account btit.com\shaadm is not a member of group BTIT\Domain Users. Changing membership of account.
TRACE [synxcaccmg.cpp:648]
CSyADsPath::fromString(BTIT\Domain Users)
<b>Account BTIT/Domain Users has ADS path 'WinNT://BTIT/Domain Users'</b>
TRACE [synxcaccnt.cpp:571]
bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
btit.com\shaadm is not member of group "BTIT\Domain Users"
TRACE [synxcaccmg.cpp:648]
CSyADsPath::fromString(btit.com\shaadm)
Account btit.com/shaadm has ADS path 'WinNT://btit.com/shaadm'
TRACE [synxcgroup.cpp:425]
void CSyGroupImpl::addMember(PSyAccount pAccount)
IADsGroup::Add: HRESULT = 0x80005002
ERROR 2006-08-03 18:11:20 [synxcgroup.cpp:426]
void CSyGroupImpl::addMember(PSyAccount pAccount)
<b>FSL-01006 Unable to add account <#0> to group <#1>. <#2></b>
TRACE [iaxxejsbas.hpp:379]
handleException<ESyException>()
<b>Converting exception into JS Exception ESyException.</b>
ERROR 2006-08-03 18:11:20
CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: <b>ESAPinstException: error text undefined.</b>
TRACE [iaxxejsbas.hpp:451]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception
TRACE [iaxxcwalker.cpp:301]
CDomWalker::processStep()
<html><head></head><body><p>An error occurred while processing service <b>Support Package 16> Import Support Package 16</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul><p>Log files are written to <b>C:\PROGRA1\SAPINS1\PATCH\MSS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:92]
doHandleDoc()
ACTION_STOP requested
WARNING 2006-08-03 18:13:28 [sapinst.cpp:1302]
CSapInst::cancel()
Installation canceled by user request.
END of Log----
Regards
Sunil Kulkarni -
HELP! Oracle FailSafe - Listener fails when adding standalone database
Well, I have a cluster of two nodes with the following specs:
(1) an Oracle 10g database each
(2) Microsoft Cluster Service (MSCS)
(3) Windows Server 2003 64-bit edition
(4) Intel Itanium Processor
(5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
(1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
(1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
At first, the Listener Service appeared to be started:
But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
What happened? What should I do? What is the problem? Many thanks!
PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying standalone database "PAYMENT"
Starting Time: May 11, 2005 19:50:11
Elapsed Time: 0 minutes, 4 seconds
1 19:50:11 Starting clusterwide operation
2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
15 19:50:12 > FS-10341: Starting verification of database PAYMENT
16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
27 19:50:15 > FS-10341: Starting verification of database PAYMENT
28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
Starting Time: May 11, 2005 20:48:43
Elapsed Time: 0 minutes, 7 seconds
1 20:48:43 Starting clusterwide operation
2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
33 20:48:50 The clusterwide operation failed !umm... help? Anyone?
-
Hi Experts,
I have a sales order for which when I create delivery I am getting no checking group error but when I check availability check in the material it is there.
You can see Availability is there in the material master
Please advise what other items should I check ?
Thanks in advance for your help !This seems to be message VV083. This is raised here:
Include FV45VF0B_BESTAND_BEDARF_ABGLEI
IF ( T459K-BEDSD NE SPACE OR T459K-ATPPR NE SPACE ) AND
VBAP-MTVFP IS INITIAL.
IF NEUTERMINIERUNG EQ CHARX.
MESSAGE ID 'VV' TYPE CHARE NUMBER 083 WITH VBAP-VBELN VBAP-POSNR.
ELSE.
MESSAGE ID 'VV' TYPE CHARI NUMBER 083 WITH VBAP-VBELN VBAP-POSNR.
ENDIF.
EXIT.
So according to this, the error is raised if VBAP-MTVFP is initial.
Please check if VBAP-MTVFP is initial on the database for this sales document.
VBAP-MTVFP should be filled with the value from the material master when the sales document is created. The following could have happened on your system:
- Sales Document created: VBAP-MTVFP is filled with a blank value as value in material master was blank.
- Material Master was updated with a checking group AFTER the sales document was created. This would not automatically update VBAP (See note 1639349). Compare the creation date of the sales document in VBAK with relevant change documents to see if this happened.
In the above situation, you would have a blank VBAP-MTVFP and the error is justified. You would need to delete the sales document and create again. -
Add userid to user group in Windows Vista OS
The operating system is WINDOWS VISTA on my machine. I successfully installed Oracle 10 R2 10.2.0.3 and upgraded it to 10.2.0.4.
I have the following issue after upgrading to 10.2.0.4:
From the DOS command prompt, I ran as "Run as Administrator" and then did I did sqlplus /nolog.
I have the following issue when I CONNECT / AS SYSDBA:
When I do sqlplus /nolog and CONNECT / AS SYSDBA, I get the following error:
SQL> connect / as sysdba
ORA-01031 insufficient privileges
{color:#0000ff}I should be able to CONNECT / AS SYSDBA without using the SYS password to do exports and imports.
Oracle suggests that I could ADD my userid on my machine to the ORA_DBA group (Windows Group) and this could fix the issue.
Please let me know where I can find the ORA_DBA group (Windows Group) in WINDOWS VISTA.
How do I add my userid to the ORA_DBA group in Windows Vista?
{color}
Thanks!Duplicate Thread.
Add userid to user group in -
How to add members in REDO group in RAC
Hi All
I need to know the syntax to add members in redolog group in RAC database. Currently i have 4 groups (2 belonging to each thread) and one member in each group. I want to multiplex.
Thanks in advanceCheck out:
http://www.lc.leidenuniv.nl/awcourse/oracle/rac.920/a96600/mancrea.htm -
Failed to add the resource due to error in the resource
Mi problema es el siguiente:
Tenemos el ORA 10G Release 2 (10.1.2.0.2), versión LITE, y a la hora de hacer ciertas operaciones se produce el siguiente error:
avax.transaction.SystemException: Failed to add the resource due to error in the resource
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:260)
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:183)
at com.hphis.corp.Transaccion.conectaBD(Transaccion.java:255)
at com.hphis.corp.Transaccion.iniciarTransaccion(Transaccion.java:141)
at com.hphis.edoctor.anotaciones.DocAnotacionBean.createNote(DocAnotacionBean.java:211)
at edoctor.anotaciones._crearAnotacion._jspService(_crearAnotacion.java:211)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.hphis.corp.filters.logueo.LogueoFilter.doFilter(LogueoFilter.java:66)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.hphis.corp.filters.gzip.GZipFilter.doFilter(GZipFilter.java:56)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
El contenido de mi data-sources.xml es el siguiente:
<?xml version="1.0"?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://www.orionserver.com/dtds/data-sources.dtd">
<data-sources>
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="ibasededatos"
location="jdbc/ibasededatos"
xa-location="jdbc/xa/ibasededatosXA"
ejb-location="jdbc/ibasededatos"
pooled-location="jdbc/ibasededatos"
connection-driver="com.informix.jdbc.IfxDriver"
username="informix"
password="informix"
url=""
max-connections="100"
min-connections="2"
inactivity-timeout="600"
schema="database-schemas/informix.xml"
</data-source>
</data-sources>
No pongo la url por motivos justificados, sale la IP de la BD a la que conecto.
No consigo saber por qué, pero con un servidor Orion no pasa.Mi problema es el siguiente:
Tenemos el ORA 10G Release 2 (10.1.2.0.2), versión LITE, y a la hora de hacer ciertas operaciones se produce el siguiente error:
avax.transaction.SystemException: Failed to add the resource due to error in the resource
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:260)
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:183)
at com.hphis.corp.Transaccion.conectaBD(Transaccion.java:255)
at com.hphis.corp.Transaccion.iniciarTransaccion(Transaccion.java:141)
at com.hphis.edoctor.anotaciones.DocAnotacionBean.createNote(DocAnotacionBean.java:211)
at edoctor.anotaciones._crearAnotacion._jspService(_crearAnotacion.java:211)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.hphis.corp.filters.logueo.LogueoFilter.doFilter(LogueoFilter.java:66)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.hphis.corp.filters.gzip.GZipFilter.doFilter(GZipFilter.java:56)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
El contenido de mi data-sources.xml es el siguiente:
<?xml version="1.0"?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://www.orionserver.com/dtds/data-sources.dtd">
<data-sources>
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="ibasededatos"
location="jdbc/ibasededatos"
xa-location="jdbc/xa/ibasededatosXA"
ejb-location="jdbc/ibasededatos"
pooled-location="jdbc/ibasededatos"
connection-driver="com.informix.jdbc.IfxDriver"
username="informix"
password="informix"
url=""
max-connections="100"
min-connections="2"
inactivity-timeout="600"
schema="database-schemas/informix.xml"
</data-source>
</data-sources>
No pongo la url por motivos justificados, sale la IP de la BD a la que conecto.
No consigo saber por qué, pero con un servidor Orion no pasa.
Maybe you are looking for
-
Satellite A300 - S-video doesn't detect TV
Dear All Last week, I bought your new product: Toshiba Satellite A300 I liked its specifications specially the s-video output. When I reached my house, I connected it to my TV: Toshiba Bomba 29A3MJ http://www.toshiba-gulf.com/site/product/prd_details
-
Depreciation run :Map depreciation expense line with acc. depreciation line
Dear all my friends, after execute Depreciation run, i don't know which line items are matched together. i mean, can you show me which depreciation expense line match to which acc. depreciation line. many thanks !
-
Help-Finder icons missing!!! Problem Solved
Please help! My finder menu icons are missing! Also, my finder preferences are missing. When I try to open the preferences for finder, nothing happens. My icons are also missing. There is no view or forward, back, or view icons. I have tried to remov
-
My IMac turns off unexpectedly in both Mac & Windows mode. I've repaired disc and permissions using the Snow Leopard install disk and cleared the cache without help. Any ideas how to prevent this?
-
I upgraded my iphone 3 to iOS 4 and some of the pics are missing from camera roll. The surprising fact is that the missing photos are random, I mean they not not most or least recent, nirther it is a contionous chunck of photos. For each of the event