Oil Paint - Need to contact person, people, or team that developed this filter

Hello Pixel Bender Community:
I need to have a customized version of the OilPaint filter developed.
Does anyone have contact information for someone who developed, or helped develop this filter?
Does anyone have contact information for someone with the right expertise for developing a customized version of the filter?
I am a digital illustrator working in the San Francisco Bay area.
Thank you in advance for any information, insights or suggestions you may have.
Regards,
Kent

Pixel Bender Accelerator for Photoshop - aescripts + aeplugins - aescripts.com

Similar Messages

  • My iphone was stolen. I blocked it on icloud. I bought a new one. Now I need the contacts from the stolen one that is now blocked. Can I get it?

    a

    If the contacts on the old phone were synced to a mail account or iCloud account, then they will be easy to recover.  Just sign into your iCloud account on the new phone (Settings > iCloud) and then enable the 'Contacts' option.  If the contacts were stored in your iCloud account, they will now appear on the phone.
    If the contacts were stored in a mail account such as Gmail, Yahoo, etc, then add that mail account to the phone in Settings > Mail, Contacts, Calendars > Add Account.  Then make sure the 'Contacts' option is enabled here as well. 
    If that still doesn't work you may need to try to recover them from an iCloud or iTunes backup of the old phone -- do you have one of those?

  • My Google Toolbar was disable I need this and because off that I need to used Internet Explorer.Whenyour team can fix this?

    I think the question explain by itself .
    I always used Google toolbar (my bookmarks are there)
    in this new versions you can't used it.
    Did you gays do not have plan to put again in used?
    I change and I think not should be the only one to change to Internet Explorer instead.

    The Google Toolbar "will not be supported on Firefox 5 and future versions." <br />
    http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

  • How to change validity for relationship contact person - BUR001

    Hi group,
    I need to be able to change the from and to date from the relationship category BUR001 (Contact Person). The system automatically sets the FROM as 01.01.0001 and the TO as 31.12.9999.
    I assumed the customizing for this is done in the relationship category settings in transaction BUBA. Setting its value to 2 or 4 should do the trick and does the trick for any other relationship category, but NOT for the contact person category. Of course I need to be able to change this one and not other types
    I am sure this problem has been encountered before. Please provide me with suggestions. Again: BUBA settings do not solve my problem for specifically this relationship category.
    Thanks in advance! Useful answers will be rewarded.
    Kind regards,
    KZ

    Hi there,
    We can creat a relationship category of contact person with validity period.then use this relationship category while you assign the contact person to the main Business partner.

  • How to avoid contact person deletion when partner function is assigned

    Hi All.
    I need your help for a contact person issue.
    I'd like to avoid a contact person relationship to be deleted when this contact person is assigned to one or more partner functions for any customer's sales area. In ECC I can't delete a contact person that is been used as a partner function in customer's sales data (KNVP). The system shows message F2 189. But it seems not to be the same in CRM as I'm able to delete this contact person relationship despite he's been used as a customer's partner function. Furthermore, when the contact person is deleted in CRM, no upload to ECC occurs, I mean, the contact person is still "alive" in ECC and linked to the customer.
    Thanks in advance for your help.

    Thanks, Prasenjit.
    Yes, we're using Web UI, so I'll try to check the partner function assignment as you told me.
    No problem regarding the concepts of contact person deletion and contact person relationship deletion, I know the difference. What I meant was that you can delete a contact person relationship in CRM (not the contact person itself but the relationship) and this relationship is not deleted en ERP due to the fact that this contact person is used as a partner function in the customer sales area. It seems CRM and ERP are working in a different way, using different checks that can lead you to inconsistencies.
    Kind regards,
    André

  • Activate Contact Person Functionallity in Vendor master

    Hi Colleagues,
    We have an issue with Contact Person functionality in Vendor master, specifically with his activation in order to use that funtion menu (Goto -> General Data -> Contact Person). Actually this command is missing in our  system.
    Customizing nodes about contact person (IMG -> Materials Management -> Purchasing -> Vendor Master -> Contact Persons) specify as mandatory requisite set the system as a Retail SAP System.
    We analized the information and executed report GETSYSDEF and the system showed message SYSTEMSWITCH016 "System is set as a manufacturing system"
    Our SAP system is a mySAP ERP 5.0 with component SAP_APPL level 0021.
    We have several doubts related above explanations:
    Is the system able to be customized as a Retail system without loose or damage some actual component (his functionality) as manufacturing system?
    Which is the procedure to follow in order to activate Retail SAP System?
    Is enough to make settings on IMG node "Activation Switch for SAP R/3 Enterprise Extension Set" flagging on application "EA-RET" or in other hand, there are other additional or different steps to make?
    I appreciate any help you can offer me. Thanks in advance.
    Regards,
    Horacio Miranda

    Dear Jurgen,
    First thanks for your response.
    We don´t want to change manufacturing system for retail system, We try to find the way to add retail system to our actual manufacturing system only for get contact person functionality.
    We need to use that functionality on vendors at tx XK01 or tx XK02 / MK02, in order to link all vendor contacts making a validation of each one against a table Z containing prohibited values. If a contact person would exist in that table the system would show an error message.
    I hope to be clearly in my explanation. Thanks again for your help.
    Regards,
    Horacio Miranda

  • Merge Contact Persons

    Hi gurus, in CRM Account Search there is an option to merge differents accounts into a single one. The resulting account contains the information of all accounts merged. I need the same procedure but with contact persons. Do you know if this functionallity is possible?
    Thank you in advance.

    This post has been moved to SAP Solutions » CRM Master Data.

  • Contact Person - Number Range

    Hi, Can anyone advise where i can assign the number range number to the contact person master data (Customer)?
    I know the tcode for creating the number range object 'Partner' is VPN1.
    Thanks
    Peter

    Peter,
    There is no additional assignment needed for contact persons.
    Once you to transaction VPN1 and create a number range interval for 'AP' that would suffice.

  • Va01-- mail to contact person

    in transaction when i gotosales tab and change the value for invoice to "email". a mail is send to the contact person, now i want that mail go to bill to party.
    is there any standard program send mails to CP. or is it a customer program which is triggeredwhen we create or change this order.
    if so how to findout that program.
    tahnks in advance.

    Hi Sai Ram,
    I am not sure may be there is some thing which triggers to send mail to CP. but in your case you can use the help of user exits and send the mail. for VA01/VA02/VA03 you can find the user exits in include MV45AFZZ. here you can check the condition if the invoice value changed then you can send the mail using the FM SO_OBJECT_SEND or some other FM.in the user-exit you need to write the code for mail to bill to party
    Regards
    vijay

  • Notifications not going to the contact person

    Hello Friends,
    Scenario - When i create an RFI Customer activity in a CSR and set its status to 'Requested Customer'', a notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization). If the customer does not reply for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), then reminder notifications (more information required - reminder) get triggered which go to the contact person and the team leads of CRO.
    Problem - In the first case,the notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization) where as in the second  case, the reminder notifications do not go to the contact person, but they go to the team leads of CRO.
    Analysis - There are 2 workflows that get triggered when the  RFI Customer activity in a CSR and set its status to 'Requested Customer''. The first one sends the notification  (more information is required) to the contact person and team leads of CRO immediately. The other workflow checks whether the customer has replied for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), and then sends the notification to the contact person and team leads of the CRO. I have checked the bindings, tasks, receiver rules and the methods in both these workflows. They are exactly similar. The only difference in these workflows is the wait step added in the second workflow.
    Do you have any clue as to what is the reason behind the second workflow not sending the notifications to the contact person ?
    Appreciate your help and timely response.
    Thanks
    Prashant

    Hello Rick,
    Thank you for your response. Here are the answers to your queries -
    Question -->Is a mail being sent to the same email address in both workflows with SendMail, and only working in one of them?
    Answer --> Yes
    Question -->There must be some other difference other than the wait step.
    Answer --> The difference between the 2 workflows is mentioned step by step as below -
    Workflow for which the notifications are sent to the contact person and team lead of CRO
    Step 1 --> Condition step whether the email address exists or not.
    If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
    If Yes --> Goto Step 2
    Step 2 --> Condition step whether the Severity of the CSR is High or not
    If Yes --> Send step (to send the email notifications to the contact person and team lead of CRO)
    If No --> Send step (to send the email notifications to the contact person and team lead of CRO)
    Workflow for which the notifications are not sent to the contact person and team lead of CRO
    Step 1 --> Condition step whether the email address exists or not.
    If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
    If Yes --> Goto Step 2
    Step 2 --> Condition step whether the Severity of the CSR is High or not
    If High - Wait Step (waits for 3 days before sending the notifications to the contact person and team lead of CRO)
    If Other - Wait Step (waits for 7 days before sending the notifications to the contact person and team lead of CRO)
    Step 3 --> Condition step to check the CSR Status (to check whether the customer has replied or not)
    If Yes(customer replied) --> End workflow
    If No (customer has not replied)--> Send step (to send the email notifications to the contact person and team lead of CRO)
    Question -->How have you implemented the wait step? Does it fetch the address before or after the wait?
    Answer --> The email address is fetched at the very first step.
    Question -->What happens if you make a test workflow with just the Sendmail step and send to the same address?
    Answer --> The notification goes to the same email address.
    Kindly let me know if the information that i have provided is comprehensive enough. Your help will be deeply appreciated.
    Thanks
    Prashant

  • Vendor Master : Customer Contact person

    Hi all,
    In my Vendor Master (XKo1/xko2) when i change the Customer contact details  an idoc should be triigered with these deetails.
    These data in the Contact Person View is stored in KNVK table.
    the stadard idoc Cremas idoc does no support those details.
    I used the Adr3mas03 idoc, but the required data is not tirggered.
    Is there any way around this.
    Regards,

    Hi
    Sorry.
    Since ERP 2005, vendors master data do support maintenance of contact persons in the core.
    Previously, this was true only for IS-Retail.
    ALE Distribution of vendor contact persons has never been developped.
    So your ADR3MAS idocs do surely integrates perfectly in the inbound system expect that this will be an orphaned Person.
    The link will the contact person (KNVK) will never occurs as there is no E1KNVKM segment in CREMAS !
    Alain
    Should be move to

  • E-mail Issue in More then one Contact Person

    Hello Experts,
    I Have One Customer : C20000
    In this Customer having the five contact person and email for that
    now i have creating sales Order and Click on Email Button in Tool Bar,
    Now i want to automatically all five contact person  in To column and email address of respective column in send message window
    Is it Possible through FMS  ?
    Then How ?
    Please Write the query  for that
    Dixit Patel

    Dear Rahul,
    I know the distribution list,
    but I want when Click on Add Recipient and Click on Distribution List,
    Automatically come to those Customer Code in Find field through FMS
    So I have select that List Name
    Dixit Patel

  • Contact person SUS-EBP

    Hi.
    I have SRM 5.0 SRMServer 5.5 with SRM and SUS in different client, SP10
    When I used transaction BBP_SP_SUPP_INI and export a vendor from EBP to SUS, this vendor was registered in the structure of SUS.
    I used self registration to create the contact person user for the vendor and this user was registered in the structure of SUS and in tx SU01 of EBP, but it was not assigned in EBP vendor structure.
    Please some suggestion?

    Hi,
    I have seen the documentation , and following are the findings.
    1) User synchronization between SUS and SRM is not mandatory and is only opitonal.
    2)So it is still possible to work in SUS with the user being not known in the SRM System.
    3) Users in the SUS system are the vendor users and they are linked to then supplier company on the SUS side.
    4) I am not clear of "no agent found" which you have mentioned in your post , i have never seen that in SUS system.

  • Vendor master data - Contact person (4.7 release)

    Hi All,
    I'm working on SAP 4.7 and I can't use the contact person in the vendor master data (it's hidden) because I'm not working with a SAP retail system. If I change standard program MF02KFMR in the form RETAIL_OR_STANDARD I can change the value of the field INT_SYSDEF-SYSDEF (from 00 to 01) as SAP was retail system and the view contatct person appears.
    Do you think it's a good idea or I can find some problems in the vendor master data with this change (INT_SYSDEF-SYSDEF = 01)?
    Thanks and Regards,
    Luca

    Hi
    Sorry.
    Since ERP 2005, vendors master data do support maintenance of contact persons in the core.
    Previously, this was true only for IS-Retail.
    ALE Distribution of vendor contact persons has never been developped.
    So your ADR3MAS idocs do surely integrates perfectly in the inbound system expect that this will be an orphaned Person.
    The link will the contact person (KNVK) will never occurs as there is no E1KNVKM segment in CREMAS !
    Alain
    Should be move to

  • Relationship Type field in Contact Person Relationship Web Ui

    Hi
    In SAP CRM we can differentiate a relationship using relationship type. This field is available in SAP GUI, in "Contact Person Relationship" category, whereas it is not present in Web UI screen for contact. In our project there is requirement to make it visible in UI also. Please help me in this regards.
    Thanks & Regards
    Hitsm

    Hi Hitesh,
    Since Contact Person is a very common relationship, it has been removed from the relationship type and has moved into an assignment block. Invariably whosoever is a contact person will come under that assignment block.
    Regards,
    Harshit

Maybe you are looking for