OM unit's creations

Dear Team,
One of my clients has the following requirement in OM unit’s creations:-
Description                         number range
Organization unit - 100000000-20000000
Position unit -    200000001-300000000
Jobs-     30000001-40000000
Please suggest!
Thank you,
Regards,
Rakesh

Dear Venkatesh,
I am doing the following steps:-
Smà30
Table-T77IV
Maintain
The click on new entries in subtype -$$$O(given), then got error message please specify a valid subgroup.
In table T77s0
NUMRG
COMP
Number assignment for all plan versions
Please guide us step by step.
Thank you,
Regards,
Rakesh

Similar Messages

Conversion in Alternate Unit of Measure

Hi All,
I have a report in which i report data in both base and alternate units of measure, the report has three filelds Material , Quantity (BUOM) and Quantity (AUOM). The problem is for a certain material; say Mat_1, the unit in which it is entered can be Carton or EA, i am using Carton to litre conversion, but my query fails when the material has EA as its unit. Is there a way by which i can convert the unit to litres be it in Cartons or EA???
Kindly suggest a solution anyone pls pls help
Thanx in advance
Regards,

Hi,
You can define your own Unit Translation using Tcode RSUOM in such a way that it takes a dynamic unit from each source record with fixed target unit as Litres.
Refer http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/325d4217139041e10000000a1550b0/content.htm for Unit Translation creation.
You would need to ensure that unit translations are available in T006 table.
--Priya

Is it possible to create LSMW for PQ10, PQ13?

Hi Fridz,
I have created the OM actions, now I'm trying to create LSMW for the actions PQ10 (creation of org unit), PQ13 (Creation of Position) but while recording LSMW relationships are not creating under - Maintain Field Mapping and Conversion Rules in LSMW. Please advice on this whether these transactions are possible to create LSMW with fore & backgroung.
$Narayana

Hi Narayana,
Use BDC's for better maintainance of relationship. which worked fine for me.
thanks,
vasu.

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Target Vs. Bottom-up Version

Hello,
I donno if this is a valid question, but here is my question
When I can use a target vesrion either to input at level-0 to aggregate it to the top level or to override
the top level(after aggregations from level-0) and spread it to the levels below, what is the use of
bottom-up version.
If I am right we can get the complete functionality of bottom-up version work
from target version as well (other than work flows and drivers are read-only, that I can think), so
why the tool has two different versions?
I wish we can have workflows(process management) for target vesrion as well.
We are planning to use target vesrion to get the bottom-up verison feature as well,
so I just want to make sure there is no much difference by not using the bottom-up
version seperately.
Please correct me if I am wrong of using target version tha way we are planning to use.
Thanks
Ram
Edited by: Ram on May 5, 2011 12:26 PM
Edited by: Ram on May 6, 2011 10:04 AM

Hi kapil,
Thanks for the response.
One question that I have before I go through the link and see what exactly you are saying(navigation in 11.1.2.0 planning)
is to assign the target version to the planning unit hierarchy. I understand you are saying to select distributed budgeting
option during the planning unit template creation, but can we assign target version in next steps(scenario and version
assignment for planning unit). I am not too sure how it is functioning in this release, but the technical document still says
target version doesn't support workflows.
Please correct me if I am missing anything.
--Ram

Serial number in VLMOVE

hi all
when we use 321 in VLMOVE for transfer materials from inspection stock to unrestricted stock and when we have serial number for some materials system take error "Only 0 serial numbers entered instead of 2 "
how can i insert serial number for material in VLMOVE or how can transfer materials from inspection stock to unrestricted stock ? please guide me
best regards

VLMOVE is used to transfer handling units and expects the serial numbers already to be assigned, it doesn't provide any input to assign serial numbers. Usually, you assign the serial numbers in the Handling Unit during packing. In this case the serial numbers may not have been assigned in the handling unit at creation. If you want to use VLMOVE, then you first have to assign the serial numbers in the handling unit (transaction HU02).
I'm wondering why you try VLMOVE as usually you transfer materials from Inspection stock via the Inspection lot processing and not via direct IM movements, indeed your QM config may prevent this.
Regards
Richard

How to Restrict Creation of Infotype Record for Certain Org Units?

Dear All,
Requirement:
Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
Is it possible to do this through standard SAP?
Thanks a lot.

Hi,
The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
Let me know if u have any concerns on this.
Thanks
Swati

Freight Unit Creation Based on Container Counts

Dear TM Experts,
This is an sale order scenario. We have a requirement where customer needs material in either 20 foot or 40 foot or both (20 & 40 foot) containers.
In SAP ECC while creating sales order business will enter count of 20 foot or 40 foot or both (20 & 40 foot) containers are required to ship the materials in text field.
How can we use this to determine our freight unit creation for all above 3 scenarios.
1. complete material is required in 20 foot containers
2. complete material is required in 40 foot containers
3. partial material is required in 20 foot and remaining in 40 foot containers
I do not have any clue how can we meet this requirements.
can any one please guide me how to meet this requirements.
1. Can we make use of text field of sale order while defining condition rules to determine the FUBR
2. I believe text field of sale order do not flow to SAP TM while creating a OBTR. For such situations can i enhance the sale order VA01 to maintain count of 20 foot & 40 foot in ecc while creating a sale order. Using this enhanced field i will enhance SAP ECC & SAP TM Interface structure to capture data from ecc & get to SAP TM system
3. For above situation do i need to make use of Conditions, Condition Types and Data Access Definitions?
4. Can we determine a more then FUBR rule for creating the FU's against single OBTR
Thanks in advance.
Regards,
Md.Rafi

HI,
I hope your Issue can be solved using the Condition type & Scale settings.
I.e Maintain your Freight condition type settings to calculate based on Volume (cal type).
Now if you want different price bands based on volume then you can use the concept of scales.
Maintain the scale settings Such as Scale basis, scale type etc.
Hope it helps.
Regards,

Unit of measure - rounding off during creation of planned order

Dear All,
We have defined one material OIL in MM41 and its UoM is EA also we have put alternative UoM is L(liter).
now we create BOM of semifinished material we use this oil as a component and enter its value in decimal points.
e.g 0.375 EA
During planned order creation or REM backflush system convert this quantity to 1 EA ,WE dont want this automatic conversion .
We have uploaded all master data in production and now it is very difficult to change all BOM
So what is the solution of this that system can not convert qty (rounding off).EA
Kindly reply
Sunil

Hi Sunil,
IN CUNI Transaction Field Decimal Places is for displaying the decimals,there is a decimal place Rounding off field below,there try to maintain 3 decimals and check whether it is working.
One more thing is Unit EA will be used always as non decimal unit,But i dont know in your buisness how for unit EA there is a decimal qty
Edited by: Girish Adaviswamy on Mar 2, 2010 10:59 AM

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

SSDT: Creation of localDB instances from project file - Sql Server Unit testing purposes

I have a SqlServer Database Project in my solution (VS2013 Professional) which has a corresponding test project with some stored procedure unit tests. Currently I am using a LocalDB and as far as I understand a local database instance is created in C:\Users\[User]\AppData\Local\Microsoft\Microsoft
SQL Server Local DB\Instances\Projects and the specific .mdf file referenced in the SQL Server Object Explorer is in C:\Users\[User]\AppData\Local\Microsoft\VisualStudio\SSDT\[ProjectName]. The unit tests run fine on my local machine which I have developed
the project on.
My issue is we have a box which is configured to check out the project file from our version control, build the project using ms build commands and then run the unit tests using VSTest.Console. Usually with C# Test projects we reference the test project
dll and the unit tests run fine. I have referenced the dll for the test project with the stored procedure unit tests in.
With the Stored Procedure unit tests however we get this exception:
Initialization method [project].[spTest].TestInitialize threw exception. System.Data.SqlClient.SqlException: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 50 - Local Database Runtime error occurred. The specified LocalDB instance does not exist.
After some digging I have realised that the localdb instance seems to be created when the project itself is created in VS not when it is built. Specifically when the localdb is first used and if you look into the appData folder of the test machine there
is no corresponding mdf file for the project.
The question is is there a way to set up a localDB instance on the new machine if all you have the project file? The only purpose of the project on the test machine is to run the unit tests, no other development purposes. VS2013 Professional is installed
on the test machine but a solution only using config file changes or MSBuild/VSTest commands would be preferable.
I realise you could change the connection string to an actual test database and run the unit tests of that but we quite like the localdb approach for the testing. I also realise that you could potentially transfer the mdf file (haven't tested this solution)
as well, though I would prefer if there is a solution to my initial question.
http://technet.microsoft.com/en-us/library/hh234692.aspx
http://msdn.microsoft.com/en-us/library/hh309441(v=vs.110).aspx
I have been reading up on LocalDB and I assume a automatic LocalDB is created when you create a sql server database project (ie on localdb first use). I have tried adding the database creation to the test project config file but do not really know where
to go from there. The second link does not really specify when the named localdb will be created if you add the config items and I am not even sure if that is an actual solution. Here's my test project config file for reference
<configSections>
<section name="system.data.localdb" type="System.Data.LocalDBConfigurationSection,System.Data,Version=4.0.0.0,Culture=neutral,PublicKeyToken=[PublicKeyToken]"/>
<section name="SqlUnitTesting_VS2013" type="Microsoft.Data.Tools.Schema.Sql.UnitTesting.Configuration.SqlUnitTestingSection, Microsoft.Data.Tools.Schema.Sql.UnitTesting, Version=12.0.0.0, Culture=neutral, PublicKeyToken=[PublicKeyToken]" />
</configSections>
<system.data.localdb>
<localdbinstances>
<add name="SimpleUnitTestingDB" version="11.0" />
</localdbinstances>
</system.data.localdb>
<SqlUnitTesting_VS2013>
<DatabaseDeployment DatabaseProjectFileName="..\..\..\SimpleUnitTestDB\SimpleUnitTestDB.sqlproj"
Configuration="Release" />
<DataGeneration ClearDatabase="true" />
<ExecutionContext Provider="System.Data.SqlClient" ConnectionString="Data Source=(localdb)\Projects;Initial Catalog=SimpleUnitTestDB;Integrated Security=True;Pooling=False;Connect Timeout=30"
CommandTimeout="30" />
<PrivilegedContext Provider="System.Data.SqlClient" ConnectionString="Data Source=(localdb)\Projects;Initial Catalog=SimpleUnitTestDB;Integrated Security=True;Pooling=False;Connect Timeout=30"
CommandTimeout="30" />
</SqlUnitTesting_VS2013>
Thanks in advance for any response. Sorry if there is any misunderstanding, while I have been using VS to develop from the start, this is the first time I have used a Sql Server Database Project.
Regards,
Christopher.

Yes, you can create a LocalDB instance manually. You use the SqlLocalDb utility, see here:
http://technet.microsoft.com/en-us/library/hh212961.aspx
Erland Sommarskog, SQL Server MVP, [email protected]

Function module for automating creation of organizational unit

Experts,
I am using SRM 4.0. In my system R/3 is acting as backend.
For creation of new organisational unit in SRM, which is not present in SRM but present in R/3 side i have to do the manual activity every time.
Is there any function module? Which can automate this process. If there is any function module which i can use please let me know. and how can i use that also please let me know.
By this automation every time through the program the new organization unit should created in SRM side.
Please let me know..
Thanks in advance. I will appriciate through rewards points.

Hi,
Thanks for your input. But i am planning to send one file for HR records and then from that file through program i will upload the file. IF for some user the orgaisation unit will not be found then there itself it would create the OU through Function module(If Any)... I am doing like this as the HR system is some legacy system not the R/3 system.
So Please help me to find out function module.
i will appeciate for you help.
Thanks

Automatic creation of TO's for Handling Unit Inbound Delivery -del type HID

Hi Guru's,
I would like to create the putaway TO's for a Handling Unit inbound delivery automatically (delivery type HID). This means at the moment of the creation of the Inbound Delivery. The packing is also automatically done by the customizing of the delivery type. Did somebody faced this requirement before?
Thx,
Carl

I found the solution:
Choose Customizing activity Define Output Types for Inbound Delivery, and define output type WMTA. Enter the following values in the detail view of output type WMTA under General Data:
Enter an existing Access sequence. Access sequence 0001 is predefined in the standard system.
Set the indicator Access to conditions.
Set the indicator Partner-indep. output.
Save your entries.
In the menu tree, choose the entry Processing Routines in the Customizing activity Define Output Types, and enter the following values:
Choose entry 8 (special function) for the indicator Transmission Medium.
Enter RLAUTA20 in the field Program.
Enter ENTRY in the field Form Routine.
Save your entries.
Choose the Customizing activity Maintain Output Determination Procedure.
Define a procedure and enter the output type WMTA in the control view of the procedure. The procedure E10001 is predefined in the standard system.
To define a suitable condition record for inbound deliveries,
choose Logistics -> Materials Management -> Purchasing -> Master Data ->
Messages -> Inbound Delivery -> Create from the SAP menu.
Enter the output type WMTA.
Enter output medium 8 (special function) for delivery type Inbound Delivery.
Select the desired Date/Time.
Select the desired Language.
Cheers,
Carl

Currency & Unit creation in Cube

Hi,
Could anyone guide me the Steps for using of currency field from start to end in BI 7.0.
Am trying with a small example where keyfields contains a currency or unit infobject.
a) created infoobject with Quantity field as Unit and Price as Currency
b) Created a Cube, with Unit & Currency dimensions
c) Created a Infosource, able to see Unit & Currency fields
d) Created transformations by using cube, able to map fields automatically
e) Am unable to proceed from DTP onwards.
I request you to please provide the steps of currency creation.
-Naveen

Its not a standard datasource.
I created my own Characteristics & KeyFigures Infobjects for practice. In that i added Amount as Currency and Quantity as Unit key figures.
I want to generate a simple report with creating Cube by Currency & Unit fields.
Could you please provide Step by Step for these in BI 7.0.
-Naveen

Display Org Unit based on User logon in Business partner creation..

Hi Gurus,.
I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data. When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai. How to address this scenario thro standard customization?
Is it common problem in CRM Webui(6.0 and 7.0).
My Org Structure:
Global
China
     Shangai
     Beijing
   Nanjing.
Thanks in Advance....

Hi Varma,
From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
Hope this helps.
Thanks,
Samantak.

OM unit's creations

Similar Messages

Maybe you are looking for