On new set up, lost pass word. pushed reset for more then 2 seconds
on new set up with air portextreme 802.11n wifi i lost pass word. pushed reset for more then 2 seconds. It is working on my computer but cant give out a pass word.
hi,
many thanks for your reply, i am new to all this so all help welcome
i have tried what you said and return the attached errors
$mailBody=@'
The account Name is :- {0}\{1}
The flie deleted was from :{2}
Time:{3}
$pcName = "GHSVR2012"
$mailProps=@{
Subject = A File has been deleted in the G Drive:
SmtpServer = 'smtp.xxxxxxxxxxx'
From = 'xxxxxxxxxxxxk'
To = 'xxxxxxxxxxx'
BodyAsHtml=$true
$events=Get-Eventlog -log security -InstanceID 4663$events.count
foreach($e in $events){
$mailBody -f $e.ReplacementStrings[1],$e.ReplacementStrings[2],$e.ReplacementStrings[6],$e.TimeGenerated
Send-MailMessage @mailProps -Body $mailBody
could i not just add in bold below
$pcName = "GHSVR2102"
$Event = Get-Eventlog -log security | -InstanceID 4663$Event.count
$User = $Event.ReplacementStrings[1]
$Domain = $Event.ReplacementStrings[2]
$File = $Event.ReplacementStrings[6]
$MailSubject = "A File has been deleted in the G Drive:"
$MailBody = "The account Name is :- " + $Domain + "\" + $User + "`r`n" + "The file deleted was from :" + $File + "`r`n" + "Time: " + $Event.TimeGenerated
$SmtpClient = New-Object system.net.mail.smtpClient
$SmtpClient.host = "smtp.xxxxxxxxxxx"
$MailMessage = New-Object system.net.mail.mailmessage
$MailMessage.from = "ixxxxxxxxxxxxxx"
$MailMessage.To.add("xxxxxxxxxxxxk")
$MailMessage.IsBodyHtml = 0
$MailMessage.Subject = $MailSubject
$MailMessage.Body = $MailBody
$SmtpClient.Send($MailMessage)
Similar Messages
-
I can not sync a tv show from my old Ipad to new one, lost pass word from old purchases. what to do ???
found it!here it is http://www.getsharepod.com/
you just have to install this software, connect your old ipod, copy all the files inside your old ipod to your laptop and after that put them inside the new one! -
I recently tried testing Server 2012 for installation and I had a major issue. Windows 8 also uses the same method for installation so this should also apply to Windows 8. I thought this might be helpful for other people who have the same
problem. My setup is a 1U server with no DVD drive, no hard drives, and only USB. I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive. I kept receiving the following error when
I tried to format the hard drive and proceed with the installation:
"We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it. Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc).
In my case, it was the installation drive itself was a thumb drive. I ended up digging up an external DVD drive and placed the installation onto a DVD. Worked flawlessly. Now I am up and running.
I tried
the steps here to no avail.
Hope this helps anyone else with the same problems.Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Leo Huang
TechNet Community Support -
was downloading the new software update on my iPhone when it froze and has been in that state for more then 15 hours.
tried turning it off didn't work. tried pressing buttons didn't work.
tried unplugging it and waiting for the power to die hasn't worked
tried the steps on the webiste but they didn't work
tried working it from the laptop doesn't connect because i can't put in the passcode.
also tried calling iTunes support but due to the holiday no one is answering
what can i do i need my phone!!!
thanksi was able to access the phone by pressing down on the off button and home at the same time
-
Hi everyone,
I have just bought new Ipod touch 32 GB and upgraded to 5.0.1 and it it worse now my battery doesn't last for more then two hour.
what should i do? it is seriously big problem.
Please help me.......This is a general comment, not directed to anyone, and not to be taken personally by anyone. This ongoing screw up with the new upgrade (5.0.1) is getting to be a **** SHAME. In no way can APPLE or anyone else for that matter not know by now that the upgrade is terribly flawed. The Ipod machines themselves are super great products, and I enjoy mine to the max. However the upgrade once applied ruins it. And at least, not to my current knowledge, there haven't been any fixes forcoming.
In my opinion Apple should own up to that fact and warn folks that, even though the upgrade was presented with the best intentions, IT JUST AIN"T WORKING. And not to download it until further notice. This noticication could be done through the retail sales outlet, online, what ever.
I liken this to a pharmaceutical coming out with a new vaccine, encourage everyone to use it, then discover it's bad to the degree it causes it uses to become sick. Rather then pull the vaccine they keep on allowing unsuspecting ones to continue to vaccinate, and become sick. What a shame!
Charlie Lee -
Update to ios7 need to tke how long ? My upateting stuck at updating icloud setting.... For more then 2 hrs wht should i do with it ?
Shouldn't take that long. Reset and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears -
HT1320 I have a apple iPad Model A1219 Lost pass word how do I set new pass word
My daughter managed to mess about with my iPod Model A1219 AOGA and she put in pass word nubers
and when I saded her what she had done I asked her for the numbers she put in but she cannot
remember so I cannot open my iPod. How can i reset the pass word ? pleaseYou'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
Wireless connection lost after macbook pro sleeps for more than 15 minutes
It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
1 - Make airport the first connection under System Preferences->Network
2 - In the advanced window:
- Under AirPort: Keep only one network name on the list (the one you use all the time)
- Select 'remember networks this computer has joined' and deselect all other boxes
- Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
- Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
- Select "Off" for IPV6 drop box
- Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
Good Luck to all who try this - at least I have not have any more dropped wireless connections.
Message was edited by: KEForex
Message was edited by: KEForex -
I recently upgraded my Iphone. Iinstalled the friendjectory app on the new phone but it will not open but for few seconds and then closed. What is wrong and what do I need to do? My old phone is still active and working. Do I need to do something about that?
Hi stanczak53,
Welcome to Apple Support Communities.
See this link for some tips on troubleshooting apps on your iPhone:
Using apps on your iPhone
http://www.apple.com/support/iphone/assistant/application/
Best,
Jeremy -
My new Zen Micro is recognized by my PC for a few seconds on
(It's the weekend and the helpline is closed). According to the messages I got during installation, all the drivers have been installed in their right location, nothing seems amiss, and when I connect the player to my PC I get the usual message, "New hardware detected" with the name of the player.
However, a few seconds later, I get the message, "A problem occurred during installation: your new hardware may not work properly". I also get the message, "A high speed device is connected to a non high speed hub" (I paraphrase here), and it then tells me that my hardware will work more slowly. I was aware of that, but I also know that devices using USB 2.0 *can* work with USB ..
I don't know what's going on. I've read this board and tried uninstalling and re-installing; I've also done a clean up of the player's HDD; I've even tried using a different USB cable. Still nothing. I'm puzzled by the fact that it *is* recognized for a few seconds when first connected.
Any ideas? I don't want to return it: I'm against the iPod on principle (no removable battery and exclusi've file format).There's some general troubleshooting help here in the Zen FAQ at Nomadness.net.
I would honestly suggest getting a PCI USB2 card. I appreciate it's spending more money, but they are cheap and it might solve your problem instantly (as well as speed up your connection). -
Can I have a single sign on pass word and ID for FireFox Sync and Accounts?
I can't keep my ID's and Password's organized for Firefox Accounts, Firefox Sync and Mozilla. Some how I've used two different email accounts and they have different passwords.
I'm using a MacBook with OS X 10.1.1 and FireFox 34.0Firefox Accounts and Sync do use the same email address (username) and same password. It's one service - Sync uses Firefox Accounts for web login.
As far as "Mozilla", do you mean this forum?
You may use the same email address and same password, but the various Mozilla websites and services do use separate registration and login databases; none are connected with other websites. -
The user and password is valid for apple not for I cloud.
You cannot create an iCloud account on Windows. You can do so on a Mac or an iOS device and then log into it with your Windows PC.
-
I'm about to call, but this is my last chance. What can I do?
Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you. -
I do reset for iPad then I lost my location , it can't go back for the right location
When you do a reset for the iPad it will change the sitting and return it to the factory sitting
How can I make my real sitting and location sitting
I tureen on iPad location , but it still have factory sitting
Help
ThanksIt is possible to install AirPort Utility 5.6 on Mountain Lion.
See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
New IPhone 5. Apple id is my email address. when I try to set up i cloud it automaticly changes my apple pass word to my provider pass word. How can I get it to stay my apple pass word?
Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!
Maybe you are looking for
-
Photoshop UI very small in Macbook Pro
On a macbook pro (late 2013) in Windows 8.1 via boot camp, Photoshop UI is extremely small while other Adobe apps size just right...why? And, what can I do to fix this?
-
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop scre
-
Cost Assignment Change on Header Level
This User changed the cost assignment at the top level to an internal order; however, it did not apply to one of the hotel charges. The other charge on the same date for the same vendor did change. What caused the one transaction to remain with a cos
-
Symptom description: I have a Department table and an Employee table. In Department table, Deptno is the primary key. In Employee table, Empid is the primary key and Deptno is a foreign key pointing to Deptno of Department table. Using BIDS, I have c
-
Sorting of Items in LookUp Flat field
Hi all, I have a Flat table "Numbers" with values from 1 to 20. This is made as a Lookup field in the main table. When i see the ordering of these values in the lookup field, it shows "1,10,11,12,13,14,15,16,17,18,19,2,20,3,4,5,6,7,8 and 9" which i b