On oracleXE 10g installation, bdump, cdump, udump are not created

Hi all,
I installed Oracle XE 10g on my system successfully, but in
C:\oraclexe\app\oracle\admin
folder, bdump, cdump, and udump files are not created. Any help, what may be the reason will be appreciated.
Thanks in advance,
Pal

The SQL used to to create and configure a database excludes the ability to create the directories required. (unless using ASM)
This means that before running the dbcreate shell script (or equivalent), the directories need to be created via the o/s itself - usually a command line script.
The Oracle XE version for Linux combines this (the command line stuff and SQL stuff) into a single script in $ORACLE_HOME/bin/createdb.sh - I would expect that you will find a .cmd version of this for XE on Windows.
In this script, the mkdir command is used to create the required directories before the sqlplus is launched to create the database.
However, this script does not create separate bdump/adump/cdump/etc directories.
It creates the following 2 directories:
mkdir $logdir
mkdir $filedir
These are defined as:
filedir=$ORACLE_HOME/dbs
logdir=$ORACLE_HOME/log
Then it configures the init.ora for the db create as follows:
user_dump_dest=$logdir
background_dump_dest=$logdir
core_dump_dest=$logdir
audit_file_dest=$logdir
BTW, I suggest that you consider posting database questions in the [url http://forums.oracle.com/forums/forum.jspa?forumID=61]Database - General forum - this forum is specifically about the database SQL and PL/SQL languages. Not about db installation, configuration and so on.

Similar Messages

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help me

Please send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya

Installations on domain controllers are not supported

Hi All, While checking prerequisites of operating system users and groups, following error message are getting. "installations on domain controllers are not supported". Please help. Thanks, Sam

Hi Sam,
I assume as a technical limiation from SAP. which I suppose being as a local user or even as a local group cannot be done or created on Domain controller..
"You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the domain controller is installed.
I hope it helps.
Regards,
Deepanshu Sharma

Purchase requisitions are not created for Component by MRP

Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
Murugesan

Hi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan

Call items are not created for Org BP's when created from Campaigns

Hello All,
We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
Please let me know if I miss any further steps.
Thanks,
Raj.

Hi Debasis,
You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
1648558 - CIF error: 'Mode linkage problem with primary resource'
1325227 - PDS-EXP: Mode linkage problem with primary resource
Regards,
RBrahmankar

Parameters are not created for M0001 feature

Hi Friends,
During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
Edited by: sharada vemula on Apr 4, 2010 11:31 AM

Hi,
Go to PE03 enter M0001
create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
Hope this helps
Ajay

Backups of the JVM.CONFIG file are not created

Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.

I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

Change number that are not created earlier accepted for change of BOM

Hi,
When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
But my problem is when i put any number in field of change number it is allowing me to change the BOM.
It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
Atul

Hi Atul,
Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
Thanks,
Rakesh J

Profitability Segments are not created for Invoices

Hi Guru's
Can any one help on this ?
"Invoice Documents Profitability Segments are not created" can you please suggest me?
Thanks,
Aakash

Hi Aakash,
I think you are trying to integrate FICA with CO-PA and then getting the error.
The posting of a contract accounts A/R & A/P document in CO-PA is dependent on-
(a) Activation of the operating concern in the SPRO node Controlling → Profitability Analysis →
Structures → Define Operating Concern → Maintain Characteristics
and
(b) CO short account assignment of the contract in the SPRO Node Financial Accounting → Contract
Accounts Receivable and Payable → Basic Functions → Posting and Documents → Documents
→ Define Account Assignments for Automatic Postings → Store CO Short Account Assignments
for IS-U Contracts.
In here, the system only carries out the posting if the Profitability Segment Assigned selected in CO
account assignment.
Hope it helps...
Thanks,
Amlan

Cluster installation failed:OCR files are not shared across all nodes

Hi gurus,
I'm trying to install RAC 10g using vmware following hunter document to install oracle 10g Rac.
I'm using centos 4.6 ,I'm now stuck on installing cluster which shows error OCR file are not shared across all nodes.
Please advice

Review the Release notes, there is a bug and a fix since CRS fails on the last node.
This bug is for EL 5, but pretty match what I've found on the log files
I'm also in EL 4.6, x64 in my case.. haven't tried the fix due lack of time.
Provide log files from CRS_HOME/logs

AnyConnect installation issues - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

AnyConnect installation issue - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

Reservations are not creating for a stock item PO

Hi All,
I have an issue with reservations for a stock material PO,
Our's is extended classic scenario(BBP 3.0 & R/3 4.7), I have created a cart and approved the cart for a stock materials.
As per business process, for a stock materials reservations are to be created but here after cart approval, under follow on documents tab, I am not getting any reservation details except shoopping cart number and its approval status.
Can any one have idea on it?
Through me some light,
Thanks in advance,
Govardhan,V.

Hi. Reservations are not supported in extended classic.
Or at least they were not when I last asked SAP about 3 years ago.
Unless something has changed the only solution was to use the BADI BBP_EXTLOCALPO_BADI to deactivate extended classic if it is an item you want a reservation for.
You would then end up using the classic scenario for these reservation items only.
Regards,
Dave.

CO-PA for good issue documents are not created

Dear All
We are using both account & cost based CO-PA , actually the problem is this that when we are doing the sales cycle, after billing my CO-PA document created but the same when I do delivery COGS document not created ,actually for sales I am taking the sales data from condition type(assignment of condition type to CO-PA value filed) and for COGS , I have assigned the COGS GL accounts in TRANSACTION Code OKB9 (automatic determine the profitability segment) also the same GL accounts I have assigned with value field in
Assignment PA transfer structure
Now when I am doing sales cycle , CO-PA document has been created when I am doing billing but when I am doing Good issue , CO-PA not created but if I go and check the GL account of COGS account I found the all detail of my profitability segment which hit this GL account
Please help in this regard.
Regards
Kashif

I assume that problem relates to billing in make-to-stock scenario. Since COPA document is automatically created with billing. Please note the following -
1. COGS GL account is not created as cost element.
2. There is no CO / COPA document at the time of delivery.
3. Condition type VPRS should exist in SD pricing. It is updated form material master.
4. Condition type VPRS should be assigned to COPA value field (just like PR00 / price).
5. Revenue and COGS value fields are updated at the time of billing.
Hope it clarifies.
Regards,

Listener and environment files are not created in New RDBMS ORACLE_HOME

Hi,
I am upgrading the EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
I have completed the steps till Implement and run AutoConfig on Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
I have completed AutoConfig on the Database tier successfully. But i doesn't find any listener files on <RDBMS_ORACLE_HOME> and similarly environment file.
These files are already available on OLD <ORACLE_HOME>.
Please suggest me if i miss any step.
Thanks
Nawneet

thanks for the prompt reply ...
while running the command
<RDBMS_ORACLE_HOME>\appsutil\bin\adconfig.cmd contextfile=<context_file> we got below error.
AC-00435: Unable to create directory :F:\app\mocppd\product\11.2.0\dbhome_1\
admin\prod_srv-moc\bdump
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: F:\app\mocppd\product\11.2.0\dbhome_1\appsutil\install\prod_srv-moc
      adsvdlsn.cmd            INSTE8_SETUP       1060
AutoConfig is exiting with status 1
AutoConfig execution completed on Mon Feb 7 05:32:05 2011
Time taken for AutoConfig execution to complete : 0 mins 29 secsHow to correct the above one and should we proceed with the Step 24 "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
Thanks
Nawneet

On oracleXE 10g installation, bdump, cdump, udump are not created

Similar Messages

Maybe you are looking for