One attribute assigned to Multiple Attribute Sets

Hello There,
I have created general attributes like Firs_Name (Character - 40), Last_Name (Character - 40) & Age (Numeric - 3) and assigned them to Multiple Attribute sets like Family_Info1, Family_Info2 & Family_Info3.
Then i have assigned the above mentioned 3 Attribute sets to a BP.
The problem is, when i maintain the info in Family_Info1 for First_Name, Last_Name & Age, system is updating the Family_Info2 & Family_Info 3 with the sames values and if i maintain the Family_Info2 with a different Value, the Family_Info1 is overwritten with Values from Family_Info2.
Pls advise, if this is the standard SAP behavior and i should create different Attributes for different Attribute Sets (Like First_Name1 for Family_Info1 & First_Name2 for Family_Info2 etc) OR, it could be a SAP Bug or i need to do some config to fix this issue.
Thanks and Regards.

This is the standard behaviour and you can create different attributes and assign them to these different attribute sets to avoid this.
Prakash

Similar Messages

How can we assign one attribute set to multiple business partners at a time ?

How can we assign one attribute set to multiple business partners at a time ? Is it possible ? Can anyone explain me ?

Hello,
please refer to the following thread:
How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?
best regards,
Johannes

One ANI assigned to multiple business partners

Hello,
we have the following issue in our CRM 5.0 CIC implementation (winclient).
When a phone call is received, if
the phone number of the caller (ANI) is assigned to more than one
business partner, no identification of the business partner is done.
Thus, what the customer agent must do is go to tab "Extended Search",
and push the button "Display All partners" . This way,
all the BP with this ANI are shown.
My question is: Is there a way to have a pop-up shown automatically, with the list of possible business partners, when the phone call is received?
Thank you!
Judit.

Hello,
please refer to the following thread:
How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?
best regards,
Johannes

How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?

Hi,
Can we assign attribute set to multiple business partners at a time, is it possible in Marketing. I got an interview question please tell me if you know the answer. Thank you in advance.sh
Regards
Kishor Kumar.

Hi Kishor ,
We can assign attribute set to multiple business partner at a time using Report " Assignment of an attribute value to allbusiness partners in a target group".
This report can be access from sap guid Marketing->Tools->exter tools.
Regards,
Anju

The order in attribute set is MESSED UP

Hello forum,
Here is an intricate description of my problem:
When I define BRIDGE_TYPE attribute set for Discoverer the sequence of attributes often changes in attribute set without my intervention. This is especially the problem because advanced attribute properties themselves DO NOT change the order. Consequently, I am getting completely messed up. I cannot identify any possible pattern here. I observe it for both dimensions and facts attribute sets.
What's wrong?
Sorry for very vague description of the problem, but that's how it's going on!!!
Another problem is sometimes on the Attribute Sets tab the button "Advanced..." is grayed out for BRIDGE_TYPE. When I move focus to the only one attribute set (BRIDGE_TYPE) and not changing anything press ok (or in some other way move out focus from the record about BRIDGE_TYPE attribute set), I get error message that only one attribute set of type BRIDGE_TYPE may exist. After I press ok for this message, the type of attribute set is automatically changed to USER_DEFINED (of course Advanced button is still grayed out). Then I press ok and open Table Properties again. There I can see two identical attribute sets but with different types: BRIDGE_TYPE and USER_DEFINED. The names of attribute sets are the same, so I have to change name of one attribute set or delete them. If I delete them and create new attribute set of type BRIDGE_TYPE, I am able to go to advanced properties and everything fine, except order problem described above. Again I cannot see any pattern here - this happened only with some of dimensions.
Does anybody observe such a strange behavior? I'm lost and disappointed. :(
Regards,
Alex

I have found a solution for ordering problem but it's realy error-prone. :(
I have determined that order is changed only when I change advanced properties for BRIDGE_TYPE attribute set. If I change them again, the order is back to the previous state, so I can handle it with some efforts. Of course, this is not good way of doing thing, but I don't know better way to handle this.
This trick really slows the work down! If someone experienced similar results, please, share your knowledge.
Regards,
Alex

Automate the assignment of business partner attribute set .

Hi All,
I want to automate assigning marketing attribute set and their respective attribute values using ABAP program.
I am debugging the code and also trying to debug by using Trace , but no success till now.
any one knows how to do it ?

Thanks Gregor,
I got the funciton modules :-
CRM_MKTBP_ASSIGN_ATTRIBUT_TAB
It assigns the attribute set and its corresponding attribute vales.
Message was edited by: Nav

Marketing Attribute Sets - BP Assigned

Can anyone help:-
I need to locate the table where Marketing Attribute Sets are assigned to the Business Partners
I can see where attribute vales are stored but not attribute sets
regards
Barry

Hi Barry,
Tables are related with Markting attributes:
CABN
CABNT
CAWN
CAWNT
AUSP (relation between business partner and assigned marketing attribute values)
KLAH
Function modules:
CRM_MKTBP_READ_ALL_BPS - returns all the BPs which have a specific attribute set assigned
CRM_MKTBP_READ_BP_DATA - returns the mkt attribute values for each partner.
parameters:
IV_GUID - BP Guid
IV_PROFILE_TEMPLATE_ID - must be the content of KLAH-CLASS
Reward Points if Helpful
Cheers
Manohar

New Format for creating Attribute Sets.

Hi,
In SAP CRM webclient ui 7.0 there is a new format for creating Attribute Sets. The format is 'value table'.
On selecting Format=Value Table the field 'Table' comes up.
There is a message: Here you can enter a table that contains all the values you want to use. This is particularly useful for attributes with a lot of values or if you want to enter multiple attributes with the same values. The table must be a check table with a search help.
Do I need to create a table with all the fields in in marketing attribute assignment block with search help on attributes field.
Can you please guide as to how I should go about this issue.
Regards,
John.

Hi John,
The Attribute Set of Format type 'Value Table' is for the Mutiple Attribute Sets. These can be either a Single Attribute Set with Multiple values or the Multiple Attribute Sets with One value.
You can include all such marketing attributes into one table which is a check table with search help. and use this as the Value Table.
Hope this helps you out!
Regards
Veena.

Creating Attribute Sets

Hi:
On OA Framework Developers Guide Chapter 3 there is a sectioin of
" Creating Attribute Sets"
I followed the example and try to execute the command on the tiltle
"Generating Attribute Sets Automatically (Only on Linux)" which I tried the following
/jdevbin/<SelectedJDevBuild>/build attributesets APPS APPS ................
but I could not find the /build command that will help the execution on the command line
Does any one tried?
I am trying to create attributesets for XMLType table.
Please help
Ali_2

Hi John,
The Attribute Set of Format type 'Value Table' is for the Mutiple Attribute Sets. These can be either a Single Attribute Set with Multiple values or the Multiple Attribute Sets with One value.
You can include all such marketing attributes into one table which is a check table with search help. and use this as the Value Table.
Hope this helps you out!
Regards
Veena.

Marketing Attribute set Authorization.

Is there marketing attribute set Authorization, So that one set of users can see only their Attribute set..Appreciate any hellp in this regard. The CRM version is 5.0.

Hi
If you have found the answer to your question, as to how we can assign an attribute set by default when creating a BP, can you please share the answer with me, since I have a similar requirement.
Thanks in advance!!!
Lavi

Restricting Edit of Attribute Sets against a BP

Hello All,
I have a requirement to be able to restrict the editing of Marketing Attributes against a BP.
The scenario is this. SAP CRM receives BP from an external system via an interface. Part of this interface delivers some marketing attributes. The attributes in this set must not be editable in SAP CRM. I have investigated the use of authorisation objects BGRKP and BGRKL, but these only control the ability to maintain the attribute set data, as far as I can see, and not to control how the attributes are handled at the BP level.
Any help greatly appreciated.
Many thanks
Jon

Hi Jon,
You need to use C_CABN_GRP auth object, to use it first you need to assign some value in tcode CT04 for those particular attribute and then in pfcg role use the same value and in Activity give only Display access.
Also i have answered similar question in below thread which might be useful in your case. Just try to give Display only access in Activity for below ones too (which i mentioned in my reply there)
Marketing attributes visibility
Regards,
Shobhit

Read BPs from a filter of an Attribute Set.

Hi SAP Gurus,
We have a scenario: We have a PROFILE/Attribute List where one attribute is selected. That attribute has a filter criteria which contains some BPs. We have to read those BPs within the filter and Assign the BPs to a target group. then we have to assign the target group to a campaign.
1. Do we have any function modules to read BPs from the filter of the attribute list automatically?
2. Do we have FMs to create a Campaign? we have found a FM 'MKT_ELEMENT_CREATE' which creates a Campaign element within a parent campaign. But we want to create a parent campaign itself. Do we have any FM for that?
Thanks in Advance.

Hi,
You can use the methods in the class 'cl_crm_mktpl_appl_base' to create a campaign and assign target groups.
the mehods used are : get instance to instantiate an object, 'element create' method followed by 'save method , BAPI_TRANSACTION_COMMIT to create the campaign and 'tggr_assign_create' followed by ''save' and 'bapi commit' to assign the target groups.
Hope this helps!!!
Prerna

Mass creation of Marketing attributes under attribute set

Hi All,
Please let me know if there is a possibility for mass creation of Marketing attributes and marketing attribute sets in SAP CRM Standard functionality.
I am not talking about below " creation & assignment to BPs using the expert tools. "
CRMD_PROF_CHAR Create/Change Marketing attribute/set
CRMD_MKTDS Create datasource/attributre list
Create marketing attribute and maintain in Business Partner.
CRMD_MKT_TOOLS you can use this to delete/assign mass marketing attributes to BP.
we can go for a BDC program, But I want to keep that as a last option.
Please help and suggest me if there is any standard way of creating or uploading the Mass Marketings attributes in CRM system.
Regards,
karthik J

This functionality can be achieved through ELM (External list management)

Error: Attribute set for field_name in view object VO_instance failed

While I try to add a new row in a table using a VO created on two EOs, it comes back with error message 'Attribute set for <field_name> in view object <VO_instance> failed' for each field I enter the data. Please suggest me if I am missing something while doing it.

Are you sure you are specifying a value for the attribute of the VO and the value of correct data type.
Also, please make sure that you have one row coming from each EO , so that the VO has one row, and a outer join is not happening.
Thanks
Tapash

How to change only one attribute at the host

Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
Chris

No, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute.

One attribute assigned to Multiple Attribute Sets

Similar Messages

Maybe you are looking for