One customer to be delivered through multiple plants

hi,
sap gurus,
one customer has to be delivered through multiple plants
instead of one/single plant.
where the configuration settings lies
please do the need ful
regards,
balaji.t

Hi there,
When determining the plant system 1st checks in customer material info record. If not found then it will check in customer master. If not found then in material master.
So in your case donot maintain the plant in CMIR or customer master. Just maintain in the material master.
Also in a sales order you can change the plant manually. So change it manually.
But make sure that all the required plants are assigned to the company code & sales org / dist channel combination. Only then you can manually change the plant. Also material should be extended to all the required plants.
Apart from this, if you want to automatically propose plants, then you need to write a customized code in teh user exit in MV45AFZZ.
There you have to define the conditions under which the system should automatically propose another plant. Check with your ABAPer if you want to go by the automatic method. But that is not advised as it is very complicated since it involved many scenarios to code for auto swap.
Regards,
Sivanand

Similar Messages

Creating Authorization for multiple plants

Hi,
I have one requirement that, Creating Authorization for multiple plants
SELECT-OPTIONS:    s_werks FOR mseg-werks.
    AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
           ID 'ACTVT' FIELD '03'
           ID 'WERKS' FIELD s_werks.
1. If have no of plants in s_werks then how to authorize the plants?
2.if i dont enter any plant in my selection screen how to authorize that?
3. if i have 5 plant only then how i can authorize those perticular plants only?
Thanks in advance,
Thanks,
DP.

S_WERKS is not a field; it's a set of fields. Use simple ABAP to select your plants and loop at the selection(s) to check...

Assign one customer to multiple vehicles in DBM 600

Dear All,
I am trying to assign one customer to multiple vehicles in DBM by using VELOB - Execute Actions in Batch.
I created one varient for customer assignment to vehicles in transcation code VELOV.
Action - QACU.
I entered Company code, Plant, Sales Orgnisation,division and customer in varient.
Run VELOB for action QACU (Assign customer to vehicle) but system gives error "Action Assign Customer (DBM) was not executed for vehicle".
How can I assign one customer for mulitple vehicle in one attempt?
Please provide the solution.
Makarand

Hi Makarand,
You'd better develop a simple program and use the function /DBM/VM13_VEHICUST_ASSIGNMENT. This approach works.
Tell me if you need the development.
Good luck.
Pedro

How to delete multiple mail ids in one customer using LSMW ?

Suppose in one customer having multiple mail ids. I wants to delete those multiple mail ids from one customer how I can do this using LSMW.
Experts please help me out this problem.

Dear Venu,
LSMW or BDC will only add / append data.
Write a program:
list of Address number of the customer from KNA1.
delete all entries from ADR6 for those customer numbers.
Regards,
Mani

Multiple Plants for Material and customer

Hi,
I have downloaded the Plants from the R/3 to CRM using DNL_PLANT object. The BP with Role 'PLANT' are created.
we have multiples plants for the same material,
I have downloaded the material master data, but in COMMPR01, the field DELIVERING LOC. is empty. Is that correct? How the system works with multiples plants.
What I can do?
Best regards
Lidisaid

Hi Lidisaid,
Ideally, the field Delivery location must get populated. Just ensure that the followig settings have been maintained.
1. Adapter Object MATERIAL
Tcode: R3AC1
Choose the tab Tables/Structures Within Object
Add tables MARC and MARC_KEY
Please also check that MARC_KEY that the field Inactive is not flagged for this entry.(This is needed to download the PLANT information as interlinkages to CRM Online in the table COMM_IL_PRDLOC.)
The plant information is seen in the Sales & Distribution tab of the product master by double clicking on the Distribution Chain.
2. Add Relationship type PRDLOCS- LOCATION OF PRODUCTS
Tcode: COMM_HIERARCHY
Check if the corresponding Material Categories for which the PLANT information is to be downloaded has the interlinkage type LOCATION OF PRODUCTS maintained in the RELSHIP types for the products categories that are to be downloaded to CRM from R/3.
Note:
If no relationship types are assigned to the product category, the PLANT information will be downloaded to the interlinkage table COMM_IL_PRDLOC. But even if a single RELSHIP entry is maintained then additionally the RELSHIP type LOCATION OF PRODUCTS also have to be maintained. E.g. MAT_FERT
Wish this helps.
Regards,
Shalini Chauhan

Multiple Plants - One Project

Hi Experts,
We have a scenario where the client may use multiple plants to manufacture a component. The client will try to complete the project in one plant itself. But, the following conditions may happen;
Case 1. When there's no sufficient capacity or resources, the balance manufacturing process in project has to be completed in other plant.
Case 2: Few numbers of parts will be manufactured in one plant, balance will be manufactured in other plant
How can this be done, and how to account for costs...for two plants? How do we complete balance or remaining machining processes in other plants? Please advise.
Thanks & Regards,
Kabir

Hi Kabir,
Please try the following link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ed/b7853488601e33e10000009b38f83b/frameset.htm
Thanks,
Dhruv Kumar Malhotra

Multiple plants creation is possiable with one Tcode in MM?

Hi All,
Is there any way to Create multiple Plants at once... like creating 500 Plants with one transaction code in MM? Don't want to use upload programme like LSMW.
Thanks in advance.
Shah Yan

Hi,
I dont think its possible to create multiple plants using a single T.Code. Since creation of Plant includes the maintenance of Address details.
Hence the only option you have is upload tools/programs such as LSMW.
Hope its clear.
Regards,

Vendor has multiple plants .Track Vendor plant in which material delivered

Hi Friends,
I have a query. I have a vendor(ABC). He has multiple plants all over india. I will give PO to the vendor. He will issue the material with reference to PO. Now I need to track from which of his plant the material is delivered. Is there any SAP functionality. Please guide me in detail.
Regards
Prabhul

Hi,
It is always advisable to go for multiple vendor codes based on region .the reason being In India the tax and duty structure keeps varyin from region to region .In your case during GR you can maintain the place of origin of goods in a text field(general tab -header text) ,This can be displayed in the form of a report to the user.
Regards
Sandeep

Multiple plant in one project

Dear PS gurus!
Want to know that can we create one project having multiple plant, if yes ? how we will do costing?How to customize?
plz let me know the concept.
Ansar

you can have multiple plants in one project
there is no customising for this - the plant would be set up as part of enterpise customising
the costing will be based on the WBS object assigned
for eg you can have a project where some work is carried out in plant A and some work in plant B - projects can be cross plant the cost will be assigned to the WBS based on the actual postings but the WBS can have different plant assignments

One Excise BOND For multiple plants

HI,
We have an Requirement like Physically only one plant , one excise registration and one excise bond , but logically we have multiple plants in sap deliveries will happen from all the plants , Excise bond creation as well as ARE1 Creation and Updating is happening for only one plant in SAP , but deliveries are happening from all the plants.
Please suggest me how we can handled this scenario
Thanks & Regards,
Gangi.

Hi,
As understand from your query, If suppose company having plants A,B,C,D and in that only A plant is Excisable and other plants are non Excisable that is Bonded plant. In this case if you are dispatching any material from A then only system to reduce the value/quantity based on the Bond defined and also same for ARE1 but for other plants not required to create any Excise Invoice or ARE1 or dispatch against bond because these plants are non excisable. In your system settings maintain the plant settings as non excisable for A,B,C
Please correct if any thing i written wrong.
Regards
Goutham

Collection strategy: one customer in multiple company codes

Hi,
we look into CM at the moment and have the following requirement:
There is one customer who has business with different companies (company codes).
the collection for these kind of customer should be based on the customer across all companies and not within each.
If customer ZZZ is in company code 1000, 2000 and 3000 and it would be necessary to have only one collection specialist on this customer across all companies.
How would you do this?
Thanks + Regards
Hein

Hi,
You can create a new collection segment containing all the required company codes and assign that segment to the customer profile to be used for this customer. This would enable you to assign the same specialist and same collection strategy. In your process receivables you will get the consolidated data for this customer. However when you process it, you will get individual detailed receivable due for individual company codes.
Regards,
Ravi

Multiple VAT reg numbers for one customer

Hi,
We have one customer who is registered in 3 countries, thus having 3 VAT registration numbers. For the invoice, it is then required to have different VAT nos. depending on where the import takes place.
I already tried to modify user exit RV60AFZC but it seems that the value for vbrk-stceg gets overwritten with the vat no. in the customer master data by the other include programs on module pool SAPLV60A.
For those who have worked on a similar scenario, I would appreciate inputs/directions. Thanks!

I presume, your requirement is fetch the different VAT numbers in output in which case, you can try with either of the following:-
USEREXIT_KOMKBV3_FILL in program RVCOMFZZ
USEREXIT_KOMPBV3_FILL in program RVCOMFZ1
G. Lakshmipathi

Checking the stock in multiple plants by creating STO to fulfil an order.

Hi All,
The requirement is to do a Stock Transfer from different Plants for fulfillment of Configuration Order(putting together different components to make one product) which always be done at one central plant. When configuration order is created the Order Header requirement is always set to u2018Complete Deliveryu2019, which means that all the line items on the Order be delivered to the Warehouse in one delivery for Configuration completion.
There are multiple plants around the Central plant and the suggestion made was to create STO from other plants to the configuration plant whenever there is a shortfalls. Currently in legacy the STO process for meeting shortfall requirement is met through Automated STO. The system looks for inventory in nearby Plant in a Sequence until it finds the inventory in one of the Plant and not external Procurement is done for this configurable materials.
Is there any way that this can be configured in SAP from MRP or planning perspective to look for the stock in a sequence of plants specified? I know using a Special procurement key u201Cstock transferu201D under the MRP view in Material master but I was not completely clear on this process.
Can anyone provide me their thoughts on how to resolve this issue.
Regards
Shane

HI Csaba,
Thanks for your thoughts. Yes it is not possible to acheive this with in Materials management. It looks like APO has the in built functionality to handle these kind of scenarios.
Shane

STO for multiple plants

Hi,
I need a help on one issue.
I have 4 plants say A,B,C,D.(Under 1 Co code)
I want to configure STO process.I have done it for 2 plants in the past.
We have to crete internal customer & vendor (acct grp 0007).
Now in SPRO,I have to do the set up for STO.
For plant A, cusromers will be B,C,D & similarthing will be for plant B,C,D.
I can assign only one customer in the STO set up.
How to do this in case of multiple plants?? I 'm doing this STO with delivery.
Similarly, how the subcontracting scenario will be there in plant to plant?
Please throw some light.
Thanks in advance,
Piyush

Dear,
I think ur confused,
be clear that u have to maintain in customising that
the plant u r setting up is which customer code for u.
say plant XYZ .And u have created the plant XYZ as a customer ABC and Vendor as PQR
so in Customising u r settings as
XYZ is my plant which is customer as ABC and selling through the mentioned sales area.
in vendor master u are maintaining that this vendor PQR is my plant XYZ.
and in customer master ur maintaining that this customer ABC is my plant XYZ
regards,
sujit

APO gATP vs R/3 ATP - To check sales order ATP across multiple plants

Hi There,
I am trying to evaluate gATP functionality for SD sales orders.
The primary requirement is to have sales order ATP checking take place across multiple plants.
E.G.
Sales order line is entered for qty 100
60 is available in plant A, 40 is available in plant B
System checks both plants and creates 2 lines - one for delivery from plant A and one for delivery from plant B
(we are currently heading down the road of writing ABAP to do this 'multi-plant' check in R/3 but the more complex the requirements get the more interested I am in understanding more about APO/gATP)
I would like to understand the benefit of implementing APO / gATP as opposed to using standard R/3 ATP and perhaps writing custom ABAP code to search for inventory across multiple plants.
I would appreciate any insight regarding what is required to setp gATP to perform such checking and any other feedback regarding this issue - especially if you have had to implement something similar at your company.
I have looked here but not much clear help:
http://help.sap.com/saphelp_scm50/helpdata/en/26/c2d63b18bc7e7fe10000000a114084/frameset.htm
Thanks,
Niall

Hi Niall
you are probably looking at RBATP (Rule based ATP). Look at transaction /sapapo/rba04 in APO where you develop your own location and product substitution rules. Going down an ABAP road in R/3 may work short-term but not long-term as the requirements may get more complex.
Regards
Srinivas

One customer to be delivered through multiple plants

Similar Messages

Maybe you are looking for