Only Computer mic works!!!

How can i get Flash media encoder to see my USB
audio and not just my computer built in mic?

How are you attaching the microphone? If there is more than
one mic in the system you need to identify which microphone you
want to connect.

Similar Messages

  • I/O Drive Upgrade Kit - only headphone/mic work!

    ?<img height="300" src="http://ecx.images-amazon.com/images/I/5ODGMPRp7L._SL500_AA300_.jpg[/img] width="300">
    My card is a? PCIX X-Fi Titanium Fatalty Pro Series.
    The upgrade kit is a Sound Blaster X-Fi Titanium Fatalty I/O Dri've Upgrade Kit
    I have one of those and I cant get anything other than the headphone/mic jacks to work.
    The volume control and the 3 buttons do not work (buttons do not light up).
    I thought it might be the cables, so I paid $5 to get replacement cables sent to me from the RMA dept and they still do not work.
    Apparently, this issue is pretty widespread, but nobody seems to have a solutions.
    Here's a thread [url="http://www.tomshardware.com/forum/2524-28-dri've-sound-card-half-working-help" rel="nofollow">from tomshardware[/url] with the same issue, yet no solutions.
    DOES ANYONE HAVE A FIX?

    Corpx
    Please refer to <a rel="nofollow" href="http://support.creative.com/kb/showarticle.aspx?sid=56793]this article[/url] and ensure that the cables are fully seated in the connectors. If this is still not working for you, it would be advisable to get in touch with our <a rel="nofollow" href="http://support.creative.com/contact/emailform.aspx]Customer Support[/url] for further assistance.

  • HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

    I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
    I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
    Can you advise me how to continue? Did I choose the wrong options?

    I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

  • Recording Narration With Computer Mic?

    Hey,
    I am trying to record a narration. I bring up the window, but it does not seem to register my computer mic, although my computer mic is working.
    Do you have to attach another mic to the computer to record?
    The screen just doesn't light up. I can't press the record button or anything. Even when I click the mic source button, nothing comes up.

    Bill is correct that I can narrate with my Logitech Webcam Pro 9000. But it 'just worked' from the moment I plugged it in (and that was to a hub, not directly to the PC) so the only tip I can offer is to check your camera vendors site to see if they have updated drivers. You could even try installing an older driver as sometimes the one vendors include in their supplied software can be faulty.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • QuickTime player 10.2 does not record audio, mic works in other apps

    Hi,
    OS: Mountain lion
    QT player: 10.2
    Perian and Soundflower are installed.
    QT is not recording audio from the computer mic or even a headphone mic, neither for audio or video recording.
    QT starts always for recording with the volume down.
    The mic works in other apps (skype or garaband).
    I am not able to find either the plist files for QT.
    I used QT in the past to record audio from the computer mic.
    I recently updated the OS from lion to mountain lion.
    Any ideas why is not working?
    Thanks!
    F

    Preferences files (plist) in /User/Flope/Library/Preferences/
    QuickTime Preferences
    com.apple.QuickTimePlayerX.LSSharedFileList.plist
    com.apple.QuickTimePlayerX.LSSharedFileList.plist.lockfile
    com.apple.QuickTimePlayerX.SandboxedPersistentURLs.LSSharedFileList.plist
    com.apple.QuickTimePlayerX.plist.lockfile
    These are some errors in the console. Not sure if related
    Feb  4 11:58:49  SystemUIServer[195]: Invalid kMDItemPath for Unsaved QuickTime Player Document.qtpxcomposition
    Feb  4 12:08:34  QuickTime Player[16053]: AVF encoder error: fail to create encoder data path (err=10)
    Feb  4 12:08:48 QuickTime Player[16053]: It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil.  This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be logged only once.  This may break in the future.

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • Can't seem to get this computer to work with 3D

    I just got this qosmio f755-3d350 today.
    I've spent a half day trying to get it working, and I'm starting to get frusterated with it.
    and the level of support.
    Comon Toshiba, you know better then releasing a product that doesn't work. and little support.
    the only thing that seems to work as far as 3D is loading a video in the blue ray player.
    I've tried games, 3d viewers, mpo's, videos, even iz3d as well.
    so i'm going through this link i found on the web as to check to see if everything is up to date.
    and I found this
    How to check if the updates have been installed correctly
    NVIDIA display driver
    - Run [PC Diagnostic Tool] from [Start] Menu -> [All Programs] -> [TOSHIBA] -> [Utilities]
    - Check the version of [Video] if it is 8.17.12.9039 or later
    Super-D IC Driver
    - Open [Control Panel]
    - Select [Programs] – [Uninstall a program]
    - Find [SuperD spd2900gs]
    - Check if the version is 1.0.1613.809 or later
    TOSHIBA Blu-ray Disc™ Player
    - Open [Control Panel]
    - Select [Programs] – [Uninstall a program]
    - Find [TOSHIBA Blu-ray Disc™ Player ]
    - Check if the version is 1.0.1.299 or later
    BIOS
    - Run [PC Diagnostic Tool] from [Start] Menu -> [All Programs] -> [TOSHIBA] -> [Utilities]
    - Check the [BIOS Version] if it is 2.00 or later
    so in checking all my drivers to make sure they are all up to date, i noticed something odd.
    eeven though i downloaded and installed the latest superd driver.
    Super-D IC Driver(v1.0.1613.809; 12-16-2011; 53.66M)
    when i go to my control panel/program files
    it says the superd driver is
    version 1.0.0.0
    i redownloaded the latest file and did an uninstal and reinstall. same thing.
    so either this driver is mislabeled, or the version isn't updated in the code.
    I don't really know, but wht i do know is I can't get this thing to do any 3D
    except use the one installed movie viewer.
    any help on this would be appreciated. I'd rather not have to use third party drivers to try
    to trick my computer into working.
    this really needs to be resolved and supported by toshiba. especially when people are paying 1300 - 1700 for these things.

    I tried some of the games that were already installed. not 1 worked.
    I tried downloading a 3d vision approved game but I got too frusterated to test it
    I tried all my 3d vision apps, that work on my glasses display like cycerlink powerdvd
    or me image manipulation tools for editing 3d images. Not 1 worked.
    The only app I've seen work is the mp4 viewer that comes with the thing. and it only plays a couple of formats
    and some vids work and some don't.
    I bought the laptop so I could create my own 3D images. and display them. But not 1 thing works that works on
    all other nvidia vision computers with glasses displays.ou
    This to me is kinda unacceptable since this laptop claims it supports 3D and all you can do is play
    a few mp4's or dvd's.
    If I would have known this. I never would have bought it.
    And the most aggrevating is toshiba doesn't seem to care.
    If toshiba can write a driver that makes the camera turn on, and play some mp4 movies.
    they can surely fix the problem.
    Especially is IZ3D is doing their job for them. but mickymouse, and works with some things.
    This is unaccceptable when people are paying $1700.00 for these.
    It should do what it claims to do

  • I am a newbie...and I think I did a big no-no as my Ipad isn't working.  I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes.  Now it says it can't restore and can't get it to open.  HELP!

    I am a newbie...and I think I did a big no-no as my Ipad isn't working.  I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes.  Now it says it can't restore and can't get it to open, getting error messages but can't fix myself.  Can anyone help??

    iPad can connect only in one iTunes Library. If you want to connect it to a iTunes Library then you have to erase it. You can erase it from iTunes. Make sure you iPad doesn't have a password, or if it has a password make sure that you connect to the computer and enter the password of your iPad

  • Can I share my itunes library between my laptop at home and my computer at work using homeshare?

    can I share my itunes library between my laptop at home and my computer at work using homeshare?

    Can I rip my CDs to only one of the iTunes instances and share this iTunes Library between both instances of iTunes?
    Have a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.

  • How do I access icloud from my computer at work?

    how do I access icloud from my computer at work?

    iCloud does not offer general file storage in the manner of iDisk, only syncing of iWork and Textedit files for access by your iOS devices. In Lion you go to the iWork section of iCloud and drag the files there in the Finder (they sync automatically on iOS); in Mountain Lion you can save directly to iCloud. But you can't store other types of files (other than by the odd workaround).

  • Iphone 4 during a call can't hear or be heard. But I know both the speakers and the phone call mic work fine.

    I bought an iphone 4 and have been having multiple issues since the moment I got it. My biggest issue when I received it was that the noise cancellation mic didn't work. I sent it back to the people I bought it from to fix it and they fixed the other mic but not the noise cancellation mic. So I know that one doesn't work with apps, speaker phone, that sort of thing. I've been just dealing with it and using headphones with a mic on them.
    Well once I put my sim card in and had to go through a huge debacle with AT&T to do it, I got a phone call and I couldn't hear anyone and they couldn't hear me. I tried switching it to speaker phone and using my headphones and still nothing. I first tried factory reset and network reset and it didn't do anything. So I tried the fix where you put a piece of cardboard in the phone and the other fix where you loosen and then re-tighten the grounding screw. Now I can hear the other person but only on speaker phone, the call is choppy, but I can hear them so progress! They still couldn't hear me. However, when I took the call off of speaker phone it was back to dead silence. I tried putting in my headphones to see if they could hear me, they still could not hear me even with the headphone mic. I'm not sure what else I can do!! I know the speakers and mic work because I listen to music and play games and I hear those and when recording on voice memo the mic and playback work fine.I also know that it isn't any issue with signal because it happens where ever I am, low signal or all 5 bars! I guess I'll try cleaning them and try putting a thicker piece of cardboard but I don't expect those to work. If you can help with any suggestions at all please let me know! I have been having the worst luck with this phone and i'm getting absolutely fed up.

    Hey there RJOBoston,
    Take a look the article below, it provides troubleshooting tips that should resolve the issue you’re running into with not being able to hear or be heard on calls.
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Cheers,
    -Jason

  • Only one DVI works on the dock

    I just purchased two new Dell U2412M displays (1920x1200) for use with my W530 and dock. I had planned to plug them both into the DVI ports on the dock, but it seems like this is problematic. When I do so, I only get an image out of the display on port 1. The odd thing is that windows actually detects that there is a U2412M attached to both DVI ports, and it allows me to enable the output on both ports, but there is no picture.
    It's not the display itself, because I swapped which display was connected to which DVI port on the dock, and now the display connected to port 2 still doesn't work (even though it did when connected to port 1).
    Futher, for the time being I decided I would use DVI 1 on the dock, and the mini displayport output on the laptop itself (with the use of a mini DP to DVI adapter), and this works fine (both external displays are working). So it's not the monitors, it is most defininately the "DVI 2" port on the dock.
    Is there some odd quirk for using this, or is the dock or laptop simply broken? I would try the Displayport outputs on the dock, but I don't have any full-size displayport cables.
    Thanks,
    Brad

    Hi, tecmec
    I would recommend making sure that the BIOS and all other drivers are up to date to make sure that the problem doesn't lie there. But if everything else on the dock works except that port, then I would be inclined to think that the dock has an issue with that port. All the ports that you can test on the computer itself work properly, correct?
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Mic works in Settings but not Echo Test

    My Bluetooth mic works in Audio Settings with excellent levels but when I use the Echo
    Test Service my voice does not record.
    I have tried re-installing Skype with no result.
    Help would be appreciated.
    toneyes

    boast wrote:I think its with setting asound for the correct default mic, but the wiki is only for USB and previous forum posts didn't have a solution.
    USB or not doesn't matter. People usually have trouble getting the mic working because they use USB cards which are not the default of their systems, so you can try the said fixes, it should work.
    For skype, did you check the Skype settings for where it inputs/outputs? Skype might be trying to use PulseAudio even if you don't have it...
    You can try setting the default device in your asoundrc:
    pcm.!default {
    type hw
    card 0
    ctl.!default {
    type hw
    card 0
    Replace "card 0" with the correct card, like "card 2,1" or "card 1".

  • Anyone got a mic working? (cs46xx Hercules Digifire 7.1)

    Morning all.
    Everything's cool with Arch atm, but I can't get my mic to work.
    I use a Hercules Digifire 7.1 sound card, which uses the cs46xx (crystal fusion is it?) module, and works fine. Since I've been playing ut2004 on here, I want to get my mic working, so I can use the VOIP in-game.
    Unfortunately, even if I put all my volumes to maximum in alsamixer, the mic doesn't work. I mean, I can hear myself in the speakers when I talk into the mic, but there's no input received by recording programs, skype, etc etc.
    I can't seem to change the volume for 'mic boost' in alsamixer, not sure if that's a related issue.
    Any ideas anyone?

    I use a Hercules Game Theater XP sound board, which AFAIK uses the same chipset; at any rate, the same driver.
    To get the mic working, set the "Mic" channel to to "Capture" in the mixer app of your choice, and mute the channel (so no feedback). That should do the trick.
    With some applications, it seems also necessary to set ADC to Capture. Funny enough, only the mic input will be captured, not the full sound as would be expected ...
    Hope this helps,
    -Sascha.rb

  • When I am in firefox and I go to google and click on a link, it pops up as something else randomly. The only way it works is by coping the link into address bar

    When I am in firefox and I go to google and click on a link, it pops up as something else randomly. The only way it works is by coping the link into address bar. I thought it might be google so I went to bing and it did the same thing. it will not go to the link but instead change to livesearchnow or ihavenet.com
    It is really a pain as I search google ALOT. So please someone help. I reset firefox once and even reinstalled it once as well as updated it once. Nothing works.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Maybe you are looking for