Open ports i phone
need to open i phone ports any help would be great
trying to get open nat type when using iphone 4s personal hotspot for xbox live
Similar Messages
-
I have a Lorex DVR that I want to monitor from my IPhone and IPad. I used to be able to do this when I had a Belkin router (easy to open ports) but I bought the AirPort Extreme router and no longer have that capability. When I use "canyouseeme" they can NOT see 80, 9000 or 1025. Lorex says I need them all available in order to access. Help! And all the help I see refers to a earlier version of the AirPort Utility so I cant use those to look at anything, I cant find the same screens, I have version 6.1 (610.31). I also don't really understand how ports work, so I need a pretty basic explanation.
Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.
-
Open Port 80, 16384-16482, and 5060-5061
How do I open ports 80, 16384-16482, and 5060-5061 and forward them to more than one IP address and still keep my network secure?
I have2 VOIP phones that I would like to get working. I can get the one working by using Port Forwarding and forwarding all these ports to its private ip address. However I believe I need to duplicate this for my second VOIP phone but you can't have the same port forwarded to different ip addresses under Port Forwarding.
I have a WRT54GS.
Thank you,
Brandon
Message Edited by 2fast4u on 02-20-2009 07:01 PMFor your 2nd VOIP phone i think you can Do is Port Triggering or you can use DMZ for your 2nd VOIP as your VOIP phone will have a Static IP.
-
I am using a 2wire modem/router. I was told by a tech at ATT that I can only click a button that allows ALL ports open, but not just port 80.
Does anyone know if there is a way to open port 80 ONLY? I'm next to done setting up a security CCTV system for my home, and this would allow me to use my computer to look at whats going on, rather than buying a new monitor.
Thanks for helping.Thanks for the reply. You and X423424X are close. From the beginning. I bought a 4 camera DVR security surveillance system. Yesterday, we installed it. I was told by the place from which I bought it ( and subsequently from the manufacturer's tech guy) that if I wanted to use my computer for a monitor for the security setup, that in the Router Firewall Settings I would have to identify the device, and then 'direct' the device "through" port 80 to be able to view the 'goings on outside' (the input from the cameras) from my computer monitor. Inclusive with this configuration via the iMac, is that the DVR is recording all the time, and I could download any portion of the recorded material from the DVR to the iMac and burn it to a disk, for example to give to the cops if there was a theft. AND, it was also mentioned that in order to remote view whats going on around the place from say, a laptop or pc when I'm out of town can also be done, but that would require opening another port, with 4 digits, like 3806, or similar. I will eventually get the port number for this operation later. So that is what I'm trying to do.
So far, the 'local tech' from the security store seems to have limited knowledge of the Mac, and of the 2Wire router/modem. So HE was on the phone with first the tech support from the security cam/DVR dealers, and then with an ATT tech. The ATT tech was the one that said, in the firewall settings on the modem, there is a button that opens ALL ports, and that was the only way to allow port 80 to be used for the DVR/security setup.
I think that he is incorrect. I think that there is a way to view the camera images on my Mac monitor, and that there is a way to configure the settings on the router to allow the camera images to be seen on the computer screen, and that I could also download to the HD on the iMac any 3 or 4 minute portion of what is recorded on the DVR, in order to burn a copy. I have a co-worker that had a car taken, and her neighbor was there in an instant telling her thatt he had the whole thing on his video surveillance, and had a disc burnt in about 5 minutes, which went to the police. Her car was found, and the perp arrested within 2 hours.
THATS what I want to end up with (no, not a stolen car, but the configuration), and I'm hoping that I can find the way to get 'er done here. There is only one good Apple/OS X tech in this town, and he is on vacation for another week. AND, I'm not sure he is a 2wire expert.
So, again, thank you for any help or input. -
Home Hub 5 - Impossible To Open Ports
Greetings, I really hope someone will be able to help me out with this, and I will try and keep things relatively short.
I have just had my new HH5 sent out to me as a result of not being able to use my own third party router with BT TV. Even as the customer service agent was explaining the features of the HH5 I knew I was going to encounter countless issues with opening ports for online gaming with my PC (thats why I had purchased my Netgear router), however as mentioned, the BT TV side of things has left me with no choice but to get the HH5.
After setting up the HH5 with my BT Infinity everything works great, with just one setback, the port forwarding features do not actually open the ports even though I have created new rules within the HH5, as I still have moderate NAT when trying to play games online. I have tried every different method available to get the ports open but it simply is not happening.
I have spoken tech support and received the usual responses of "we do not help with port forwarding" and "you need a PC expert to help you with this".
So as a last resort I have signed up to the BT forum in the hopes of finding someone who may be able to help me get things setup with opening up the moderate NAT that just wil not go away. I know there are countless other threads with similar problems but from what I have seen none are related to the HH5.
Thanks in advance!If you are not using the multicast channels, then your Netgear should work wit BT Vision, with a slight change.
Using BT Vision with other routers
If you are using multicast, then anothe router may be needed.
Known Routers to Work with Multicast/IGMP
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Opening port on ultraline series 3 model 9100 em??
I have the ultraline series 3 model 9100 em. I was trying to configure it to open port 5900 (so I can use Mocha VNC on my phone). Can anyone advise how? I attempted to look at portforward.com but can't locate this particular router. I spent an hour yesterday being transferred from india, to tx, back to india...and nobody could get me to tech support...which usually is hit or miss anyways depending on who you get.
Can anyone here help me out, or point me to another site? I've done this on other routers (linksys) but it has been so long, and the layout of this particular router has me perplexed.
Thanks!After you log-in to this router, show the first screen that you see.
While you do not see a guide for the ultraline series 3 model 9100 em there, the screens of your router may be close to the screens of another router guide that they provide.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Need help with opening ports on airport extreme
My vonage phone is connected to airport extreme router, voice quality of phone calls was poor. Vonage tech support says vonage port on my airport extreme was closed and i need to open it.
Here is my chat details with vonage tech support-
The following ports are needed for Internet communication between the Vonage adapters and the Vonage servers.
SIP: Port 5061 UDP
RTP (Voice) Traffic: Ports 10000-20000 UDP. When a call is made, a random port between 10000 and 20000 is used for RTP (Voice) traffic. If any of these ports are blocked, you may experience one way or no audio.
Please do suggest me the way to open the ports on airport extreme
Thanks
VenkiInstructions for opening ports is here.
https://discussions.apple.com/docs/DOC-3415
You should be fine opening the whole range, 10000-20000 -
BTHUB 5 opening ports doesn't seem to work.
I've was recently got a upgrad to my phone line and got the Unlimited Faster Broadband package.
The extra speed is great, but I'm unable to access thing like my online banking and various other sites. I do a little gaming and purchased a new game (Wildstar). It requires various ports open which from what I can see the new BT HUB 5 won't allow. I've spent the last 2 days reading all the problems and troubleshooting and have still been unable to open the ports.
Most of what I read goes over my head, so in the end I decided to give up and pay this 10 a month IT help with BT. Explained the problem and he got remote access to open the ports. Tried the game and it didn't work. He opened all the ports and dropped firewall. Still the game didn't work. He explained that nothing is wrong with the hub and it will be the game that is the problem.
I've just checked with one of the site to see if the ports are open and it says they are still closed....
I went to PC world yesterday to get a replacement for the BTHUB 5 and the sales rep recommended NETGEAT N600. It has a fiber contection, but don't think it will work.
At this point I refuse to give up... Should I keep trying with the BTHUB 5 or try to find a alternitive router.
Any adivise would be greatly appeciated as I'm currently running in circles.
Cheers
trying to open ports to access to
Solved!
Go to Solution.When the BT guy was saying that he'd remotely opened the ports were you checking this by seeing if a site that checks whether ports are open on an IP address was saying that they're open? Just because the router says they're open doesn't mean they're open. Just because some BT guy says they're open doesn't mean they're open! Only evidence says whether they're actually open or not!!
OF COURSE he'd blame the game! His bonus depends on "solving your issue" (measured as "getting you off the phone") as quickly as possible. They measure what's easiest to measure = length of the phone call(s). -
I have an airport extreme and I am trying to play a new game on my xbox one and it keeps kicking me I have comcast internet that is more than fast enough so I went to the games site and it says I need to either create a static ip or to open ports no idea how to do either of these or what that does any help would be appreciated.
There are heaps of posts here about how to open ports on apple routers specifically for xboxes.
AirPort Extreme and xbox 360 -
I am encountering a strange behavior in new zones created using zonemgr 2.0.6 (this is the only way I create zones, so I do not know if the issue is more general). When I create a new zone, two strange things are happening:
1. Immediately after the zone is created, no services are running, not even ssh
2. About 10 minutes later, a whole bunch of services are running. Most of these are not running on the global zone.
For reference, nmap output on the global zone is the following:
[dcomsm1@dcomsm1:~] $ nmap t2000
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 20:51 EST
Interesting ports on 131.247.16.134:
Not shown: 991 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
2161/tcp open apc-agent
3052/tcp open powerchute
4045/tcp open lockd
32774/tcp open sometimes-rpc11
32775/tcp open sometimes-rpc13
32776/tcp open sometimes-rpc15
32777/tcp open sometimes-rpc17
The new zone is created using the following zonemgr arguments:
[root@t2000:~/zonecfgs] # more ./temp.sh
#!/usr/bin/bash
./zonemgr -a add -n drenkhah -z "/export/zones" -P "root_pw" -I "131.247.16.159|e1000g0|25|drenkhah" -R "/root|/usr/bin/bash" -s "basic|lock"
zone creation output is as follows:
[root@t2000:~/zonecfgs] # ./temp.sh
Checking to see if the zone IP address (131.247.16.159) is already in use...IP is available.
cannot create '/drenkhah': leading slash in name
chmod: WARNING: can't access /export/zones/drenkhah
chown: /export/zones/drenkhah: No such file or directory
Zone drenkhah will be placed in the following directory: /export/zones/drenkhah
Preparing to install zone <drenkhah>.
Creating list of files to copy from the global zone.
Copying <2568> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1042> packages on the zone.
Initialized <1042> packages on zone.
Zone <drenkhah> is initialized.
The file </export/zones/drenkhah/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
Creating the sysidcfg file for automated zone configuration.
Booting zone for the first time.
Waiting for first boot tasks to complete.
Waiting for automatic post-install reboot to complete
Updating netmask information.
Updating /etc/inet/hosts of the global zone with the drenkhah IP information.
Generating ssh host keys. Details in the (/root/.zonemgr/zone28330-ssh.log) file.
svcadm: Pattern 'svc:/network/ssh' doesn't match any instances
Setting the root user's home directory to /root
Setting the root user's shell to /usr/bin/bash
Disabling un-necessary services via basic method for the default services.
Zone drenkhah is complete and ready to use.
nmap output just after creating the zone is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 17:53 EST
All 1000 scanned ports on 131.247.16.159 are closed
Nmap done: 1 IP address (1 host up) scanned in 29.39 seconds
nmap output 17 minutes later is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 18:10 EST
Interesting ports on 131.247.16.159:
Not shown: 986 closed ports
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
23/tcp open telnet
25/tcp open smtp
79/tcp open finger
111/tcp open rpcbind
513/tcp open login
514/tcp open shell
587/tcp open submission
4045/tcp open lockd
6112/tcp open dtspc
6788/tcp open unknown
6789/tcp open ibm-db2-admin
7100/tcp open font-service
Nmap done: 1 IP address (1 host up) scanned in 29.25 seconds
Note that there are many open ports
# uname -a
SunOS t2000 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200
Thanks
ManishThe Leopard OS X firewall is application based and not port based. Honestly, I haven't played with it enough to know for certain how to answer your question.
But... when you do connection sharing, you're essentially doing a port based NAT for the systems on the other side of your Mac. This pretty much keeps you from initiating anything to the other system even without a local firewall unless you were to configure port forwarding.
As for blocking packets, you would need to use the 'ipfw' command to do things at the port level. -
Hello Rogue Amoeba support tells me, in order to get the Airfoil Speakers software to function, I must open port 5000 through 5005 on my router (WRT54G). I have scoured the .pdf manual, perused the web support site as well as the present forums. Mostly, I don’t know what much of this stuff means so I may have inadvertently passed up what I need to know. Mainly, I don’t want to screw up the router function as it is working just dandy. For all I know, ports 5000 through 5005 are already open. If anyone can give me some guidance in plain English, I would certainly appreciate it. Thanks.
Log in to the router set-up page. To do this, open up a web browser ( Internet Explorer , Firefox etc) and type on the address bar your default gateway (if left alone, it is usually 192.168.1.1). Just leave it's username blank, password as a default is admin.
Go to the Applications and Gaming tab then go to the Port Triggering subtab. Start port is 5000 and end is 5005 for both Triggered and Forwarded range. -
Help open port on ASA5510 (version 8.3)
Hi all,
I configured ASA to open port 21, 3389, 5900 (outside access in) but when i check port just success : 21 and 3389, Error: 5900
If i configured with only one port 5900 or 3389, is't ok, i don't undesrtand what 's the problem?
ASA5510>
ASA5510> ena
Password: ***********************
ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password *********************** encrypted
passwd *********************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no na
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network Remote_Desktop
host 192.168.100.29
object network VNC
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_in extended permit tcp any host 192.168.100.29
access-list outside_in extended permit tcp any host 192.168.100.4
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst
asdm image disk0:/asdm-631.bin
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network Remote_Desktop
nat (inside,outside) static interface service tcp 3389 3389
object network VNC
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password *********************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:667cb3ec729681c78ccab9a57abd89df
: end
ASA5510#ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password ****************** encrypted
passwd ****************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network remote_desktop
host 192.168.100.2
object network remote_vnc
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_access_in extended permit tcp any host 192.168.100.4 eq 5900
access-list outside_access_in extended permit tcp any host 192.168.100.2 eq 3389
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asd
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network remote_desktop
nat (inside,outside) static interface service tcp 3389 3389
object network remote_vnc
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 172.16.17.1 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password ****************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4f061a213185354518601f754e41494c
: end
ASA5510#
So i configured again, but i'm not to access to 5900 port -
Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards. -
Open ports on new airport extreme to play online games
hey, i have the new airport extreme and i wanna play online games.
how do i open ports with the utily that came on disk.
i have no clue how to configure it.
i tried in bridge mode, but than the airport starts flashing amber and other users in house wanna surf on the net aswel.
kind regardsAirport Utility -> Manual setup (Cmd+L)
Internet -> NAT
Enable a default host
Then in Internet -> DHCP
permanently assign the default host IP to the machine you're going to play the games on.
This is what other routers call the "DMZ" address. Be sure to run a firewall on that machine! -
Open port issues with Direct Print functionality
Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT STATE SERVICE VERSION80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 secondsOK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT STATE SERVICE VERSION
80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open tcpwrapped
443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5: 9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open netbios-ssn
631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open tcpwrapped
7435/tcp open tcpwrapped
8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open jetdirect?
9220/tcp open hp-gsg HP Generic Scan Gateway 1.0
137/udp open netbios-ns Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open snmp SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
| Wifi0
| IP address: 192.168.1.211 Netmask: 255.255.255.0
| MAC address: a0:d3:c1:bd:c8:32 (Unknown)
| Type: ethernetCsmacd Speed: 10 Mbps
| Status: up
|_ Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
| TCP 0.0.0.0:7435 0.0.0.0:0
| TCP 192.168.1.211:56076 15.201.145.52:5222
| UDP 0.0.0.0:3702 *:*
| UDP 127.0.0.1:666 *:*
|_ UDP 192.168.223.1:67 *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
| NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
| Names
| HPA0D3C1BDC832<00> Flags: <unique><active><permanent>
| MSHOME<00> Flags: <group><active><permanent>
| HPA0D3C1BDC832<20> Flags: <unique><active><permanent>
| HPPS7525<00> Flags: <unique><active><permanent>
|_ HPPS7525<20> Flags: <unique><active><permanent>
| smb-security-mode:
| Account that was used for smb scripts: guest
| User-level authentication
| SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT ADDRESS
1 23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on
Maybe you are looking for
-
User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013 I can login with the these AD users and AD direct import is working just fine. We are not using UPS. With admin user when I clic
-
I've done this before so I know I'm not crazy! I've been creating web galleries for a few years in PS and recently started using Bridge in the last few months. I've been able to rearrange the file order so when the web gallery is created, it will s
-
HI ALL SELECT SINGLE knumh FROM a081 INTO wf_knumh WHERE datbi < idate AND datab > idate AND KONT_PACK = WF-PCKG_NO AND KONT_ZEILE = WF-LINE_NO INPUT IS IDATE,THERE is one record in datbase table for this condtion. but i am not getting. i don
-
Pacific Sales Purchases inside BBY
Warning to customers buying merchandise at pacific sales inside the best buy store. So I bought an appliance at the store, paid with my BBY credit card and at that time (end of April) they had that promotion that you get 6% back when you use your car
-
Can's find the 8 extra free lessons for guitar.
I recently purchased a new iMac with Garage Band preinstalled. Upon opening it, I found the lesson section and watched the first lesson. It says that I can download more free lessons from the Lesson Store in the video, but when I try to do so the p