Operation confirmation without inspection results - not working

Hi All,
We have 4 operations for one production order.
1st operation has 5 MICs
2nd operation - no MICs
3rd operation - no MICs
4th operation - 1 MIC.
In tcode OPK4 I have configured error message if QM results are not recorded.
Before result recording I tried to do 1st operation confirmation (tcode CO11n). I got error QM data for operation missing (as expected).
Now for the first operation (having 5 MICs), I have recorded values for only 1 MIC (out of 5). Then it is not giving error for 1st operation confirmation.
Our requirement is- all 5 MICs must be recorded for operation confirmation.
How to handle this. Please Help.
Thanks & regards

The configuration setting you have made doesn't give error message during confirmation even when one of the MIC assigned to one Operation is recorded and remaining MIC's assigned are not recorded.
Hence we can use User Exit during Confirmation screen and do the necessary coding to throw a error message if RR is not done.
Best Regards,
K. Raghavendra Nayak

Similar Messages

Copy inspection results not working

Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaX

Go through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

IProcurement - new VO for search results not working properly?

Greetings
There is a requirement for the project I´m working, where the search results on iProcurement must be filtered depending on some profiles setted for the user.
So, basically the search shouldn´t look into ICX_CAT_ITEM_PRICES, but on a custom view that works on that table, but filtering results.
Unfortunately, that´s not working. I extended the VO (which seems to be SearchResultsVO and ItemDetailParametersVO), so the queries are now pointing to the view. But once the search is performed, the results are not filtered. It´s the very same results as before.
Am I doing something wrong? There is some cache that works even after the Apache server is restarted? Please I could really use some help on the subject! Thanks!
Best Regards,
Thiago

Thiago,
Why don't you use a local Jdev setup for substitution process so that testing and debugging is easier.
Follow these steps for testing locally:
1. Add your VO to AM.
2. After extending VO, do the following,
Right-click on your project in the Navigator pane, and select Edit Business Components Project (or right-click on the project's .jpx and select Edit <project>).
a. Select the Substitutions section.
b. From the Available list, select the base object that you want to replace and press ok.
3. Normally, the BC4J runtime does not read a project's .jpx file. To override this default behavior in JDeveloper so you substitutions can be used, you must do the following to ensure that the classpath contains the .jpx file.
a. Right-click on your project and select Project Settings.
b. Then in Configurations | Development | Runner, add -Djbo.project=Name to the Java Options. Note that the Name value is the .jpx file name without the .jpx extension (for example, ExtendLabSolutions). Be sure to include a space between any existing options and the new option.
--Shiv

DRM content and Airplay without internet does not work.

First off I am extremely pleased with my cutover to the Apple world. Like many I have been using the "gateway" Apple products for years and have just recently purchased a new MBP.
I have just spent the better part of a day testing out what happens when you purchase a movie from the iTunes store and attempt to play it via AirPlay (ATV2) without an internet connection. It does NOT work or at least I could not make it happen. Its taking a little shine off Apple for me, and definitely something that will make me think twice before going deeper into the "Cloud."
My specific need is to have both purchased and rented movies on my shiny new MBP and stream them via AirPlay in my RV with an ATV2 that does not have an internet connection.
Before any pseudo techies chime in, here are the test cases I have used:
1. Connect my wireless router to the internet and connect the ATV2 and MBP to the router (wirelessly) everything works perfect.
2. Disable internet access to the router and cold boot both ATV2 and MBP then reconnect both to the router (wirelessly) to simulate a roadtrip in the RV.
     Result #1: movies that I have created (HandBrake copies of DVDs) work perfectly
     Result #2: movies that I have purchased via iTunes ----DO NOT WORK with AirPlay (I get an error message saying cannot connect to ATV2)
     Result #3: Digital copies that come with the Bluray for iTunes DO NOT WORK with Airplay (same message from #2)
     Result #4: If I reconnect the router back to the internet then everything works fine.
Unless I am missing something here (and please let me know) I would suspect that there is a DRM workflow here that requires home sharing to connect back to my Apple account, correct?

What you are experiencing is identical to my experience. With the recent power losses in the Northeast due to Irene, we lost cable and internet connectivity. Luckily we had a generator so that we could still watch our movie and TV library on AppleTV. We were wrong. While we have purchased and own many TV shows, virtually none of them were available for streaming via an iPad, iphone or any of our imacs using Airplay to a TV. Compounding matters, it was also impossible to take a direct VGA connection from the computer where my itunes library resides, and play DRM content on our TV. What is crazy about this, is that this is for content that we purchased...some of it several years old.
I understand Hollywood's desire to control piracy, but this is not the way to do it. There should not be a need for an internet connection to play DRM content on the devices that have shared itunes accounts. This would mean that if you take your AppleTV anywhere w/out an internet connection (for example on travel), you will not be able to view any content that you own that resides on your macbook or ipad (at least you will not be able to view it on a TV).

Subtraction of two key figures normalized to result not working as expected

Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
200805         PLANT-A MAT-1            200805         510,235.00
200805         PLANT-B MAT-1           200805          74,240.00
200805         PLANT-A MAT-1           200806         438,721.00
200805         PLANT-B MAT-1           200806          74,240.00
200805         PLANT-A MAT-1           200807         356,981.00
200805         PLANT-B MAT-1           200807          74,240.00
200806         PLANT-A MAT-1           200805               0.00
200806         PLANT-B MAT-1           200805               0.00
200806         PLANT-A MAT-1           200806         510,235.00
200806         PLANT-B MAT-1           200806          74,240.00
200806         PLANT-A MAT-1           200807         438,721.00
200806         PLANT-B MAT-1           200807          74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Comparison Units (June 2008) 510,235.00 438,721.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Comparison Units (June 2008) 74,240.00   74,240.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 1.77%       2.74%
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units % -1.77%      -2.74%
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units %       0.00        0.00
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
Mario

Hi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P.

Delete Operation in JDBC Sender Adapter not works

Hi,
    I have one student table which contains the fields ID,Name,BirthMonth,BirthYear,ReadFlag fields. ReadFlag is a character field or lenght 1 which contains only values either 'Y' or ' '.
     I want to execute delete operation in this table ie to delete the records which contains the readflag = 'Y'. So, I set the below values for the following parameters.
DELETE FROM student WHERE READFLAG = ' Y '
Query SQL Statement : SELECT * FROM student WHERE readflag = 'Y'
Update SQL Statement : DELETE FROM student WHERE READFLAG = 'Y'
Poll Interval : 60 Seconds.
    There are more records in this table which contains readflag = 'Y'. But, the Adapter does not delete those records from the table i.e delete operation is not executed. At the same time, in Comm. Channel monitoring it does not show any error, but the delete operation is not carried out in the table.
     I tried after 'COMMIT' the table also. But it does not work. What could be the reason ? or How to use Delete Operation effectively on the table ?
     Kindly help me friends to solve this problem.
Thanking you.
Kind Regards,
Jeg.

http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm >>>
<i>Adapter Work Method
You must add an indicator that specifies the processing status of each data record in the adapter (data record processed/data record not processed) to the database table.
The UPDATE statement must alter exactly those data records that have been selected by the SELECT statement. You can ensure this is the case by using an identical WHERE clause. (See Processing Parameters, SQL Statement for Query, and SQL Statement for Update below).
<b>Processing can only be performed correctly when the isolation level for transaction is set to repeatable_read or serializable.
Example
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = 1 WHERE processed = 0;
processed is the indicator in the database.</b></i>
try with repeatable_read or serializable !!!
Also go thru this thread - DELETE Querey in JDBC SENDER

Export for DVD with Animation codec without alphas channels not working?

I'm using FCP 5 with DVDSP. My FCP projects consist of quicktime movies that are using the Animation compressor (for lossless quality), and the movies contain alpha channels (thus they were rendered at Millions + colors to preserve the alphas).
This is my problem. I want to now export a quicktime movie to use in DVDSP with animation compression, so it is again lossless quality (obviously to presever the quality through these steps). But I do NOT want to preserve the alpha channels, because what I've learned is that when made into a DVD, the alphas are not preserved and the image looks wrong (as if without the alphas).
So I basically want to "flatten" the video, if there was some way.
I would assume the solution would be to, in FCP, export a quicktime at animation compression, but set to Millions for colors, and not Millions + (I was taught that the Millions + will preserve the alpha info).
Well, what's happening is when I set it to that, it renders, but then I get info on the movie in Quicktime and it says it has Millions + still. And thus, it looks wrong in DVDSP.
What is going on? Is this a bug in FCP?
Does anyone have an idea as to how to get around this. The only thing that has worked for me is to export the Quicktime movie with "none" for compression, but that's making the movie SO large that I can't work with it and it doesn't play right when I make the DVD.
I really appreciate anyones help on the matter. Thanks!
Brian,.
Quad-core 2.5 G5 Mac OS X (10.4.6) 30" Apple Cinema Display
Quad-core 2.5 G5 Mac OS X (10.4.3) 30" Apple Cinema Display

Thanks for the suggestions. I have not yet tried laying a solid black video track underneath to see what it does, but it seems like a good idea and I'll try it out to see what happens when I get back home.
I'll try to explain what I mean by the image looking wrong.
I'm picking up where another left off, so I'm not sure of how he cut the quicktime movie together; all I know is that they used alpha channels in Photoshop and After Effects to make the image looks the way they want it. This is a drawn character laid on a white background with a black frame around the entire image. It looks the way he wants it to in the quicktime movie, and this quicktime movie is 720x480, animation millions colors +, 24fps.
This movie, along with others of the like, need to be cut together in FCP and then put on a DVD with DVDSP. When I export it and it looks "wrong", what's happening is there is a black block behind the drawn character. The guy that made the movies in AE says that, that is what it looks like when the alpha channel is not working correctly.
To test things, I've changed the quicktime compression settings in the sequence settings. If I set it to anything that is not animation, I get that black block in the viewer. (Note though, that if I set it to animation, millions + or not +, it shows the alpha correctly both ways).
In FCP's user manual it says that if you're passing your movie on to a DVD, to use a high or lossless compression to keep the quality up, like animation or PhotoJPEG. For this reason, I haven't wanted to go to DV - especially with this type of image (graphic drawn shapes), it's easy to see a quality difference.
It really seems like there is a lot of voodoo involved with compression settings. As for now the best "fool-proof" solution I've found is to re-render the movie in After Effects at millions (not+) so that it won't contain the alpha channel info, and FCP seems to like that a lot more.
I just wish I could get FCP to work with the movies as they were because I'm having to re-edit everything to work with these new movies now.
Thanks again for the tips and insight.
Quad-core 2.5 G5 Mac OS X (10.4.3) 30" Apple Cinema Display
Quad-core 2.5 G5 Mac OS X (10.4.3) 30" Apple Cinema Display

Account creation confirmation e-mail- link not working

I wanted to create a Itunes account, i do not have a credit card since i cancelled it 2 years ago for never using it.
I created one by using Click&buy, but at step 3 it's not working i get directed to this site:
http://www.apple.com/itunes/affiliates/download
Obviously this was not working, i tried it another way, i picked a free app from the store, then i was asked to log in, or create an account, i picked the second.
This time at the payment part i could pick "none" so i did. after that i finally received a verification e-mail with a link in it to activate my account.. guess to what page i get linked to:
http://www.apple.com/itunes/affiliates/download
I want to order Apps & music but without an account it's impossible, atm my Iphone is only my phone and nothing more.
Please assist!

On a side note:
I've tried to activate it on 4 different computers: XP, win98, Vista, Internet on the Iphone non working.
In total 5 hours spend on searching on google, browsing these forums for a solution.

Placing components without layout manager not working

Hey there, I am working on a java game version of pong which I have begun to try and do using Java Swing. The problem I am currently having is reposition the components in the main window part of the game which is were the user can start a new game or close the program. I having tried using the absolute positioning by setting the layout manager to null but then everything goes blank. I can't figure out why this is not working. Here is the code so far...
import javax.swing.*;
import java.awt.*;
public class SwingPractice extends JFrame
    private Container contents;
    private JLabel titleLabel;
    private JButton startGameButton;
    public SwingPractice()
        super("SwingPractice");
        contents = getContentPane();
        contents.setLayout(null);
        this.getContentPane().setBackground(Color.BLUE);
        startGameButton = new JButton("Start Game");
        startGameButton.setFont(new Font("Visitor TT1 BRK", Font.PLAIN, 24));
        startGameButton.setForeground(Color.cyan);
        startGameButton.setBackground(Color.blue);
        startGameButton.setBounds(350,350, 75, 75);
        titleLabel = new JLabel("The Amazing Ping Pong Game!!");
        titleLabel.setForeground(Color.cyan);
        titleLabel.setBackground(Color.blue);
        titleLabel.setOpaque(true);
        titleLabel.setFont(new Font("Visitor TT1 BRK", Font.PLAIN, 24));
        titleLabel.setBounds(0,350, 75, 75);
        contents.add(startGameButton);
        contents.add(titleLabel);
        setSize(700,350);
        setResizable(false);
        setVisible(true);
    /*private class SwingPracticeEvents implements ActionListener
    public static void main(String [] args)
        SwingPractice window = new SwingPractice();
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
   Any other critiquing would be greatly appreciated. Thank you.
Edited by: 804210 on Oct 21, 2010 1:30 PM

804210 wrote:
Hey there, I am working on a java game version of pong which I have begun to try and do using Java Swing. The problem I am currently having is reposition the components in the main window part of the game which is were the user can start a new game or close the program. I having tried using the absolute positioning by setting the layout manager to nullDon't. Ever. Never. Well, mostly.
Read the tutorial chapter about [url http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html]Laying out components. It even features a section on absolute positioning - which you should skip reading, of course! :o)
And read this old Sun topic: http://forums.sun.com/thread.jspa?threadID=5411066
Edited by: jduprez on Oct 21, 2010 10:48 PM

Send Results Not Working

Here is my php code:
I am not getting the emails!!
<?php
$subject = 'Results from Contact form';
$emailadd = '[email protected]';
$url = 'http://www.xxxxxxxx.net/thankyou.html';
$req = '1';
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>
Here is the page it is going on:
http://www.heapwebdesign.net16.net/contact.html
I have used this code before and it works fine. The only difference is this time I have it in a sliced photoshop image.
ANY ideas???

Test the ability to send an email by using the following simple test script:
<?php
$to = '[email protected]'; // use you own email address here
$subject = 'Test of email function';
$message = 'This is a test of the mail() function on my website.';
$success = mail($to, $subject, $message, 'From: '. $to);
if ($success) {
echo 'The email was sent';
} else {
echo 'Mail failed';
?>
Just put that script in a PHP page, upload it to your server, and load it into a browser. If you see that the message was sent, but nothing still arrives, it's likely that the server requires a fifth argument to mail(). This normally consists of '-f' followed by an email address of the same domain as the website.
mail($to, $subject, $message, 'From: '. $to, '[email protected]');

Random test questions quiz results not working

I have a project with random test questions. It's published in HTML5...Each time I play the project in preview, the test results are accurate and correct at the end...However after I have published the project to my site, all the random test questions are NOT accurately scored in at the end of the quiz...It's tells me basically I got all the questions wrong, when in fact the on each questions my display is clearly stating it's correct.
If I move the question out of the random test questions and back into the main project...it is scored correctly, but once it's back in the "pools" area, it is scored incorrectly in the final tally as a random test question...Don't have a clue why this is...it's really been time consuming trying to fix it...and my fortune so far fixing anything to do with Captivate is really low! Buggy! I'm using Captivate 8, so have no idea...
Anyone have any idea what is going on?

So obvious I don't know why I didn't think of that. LOL
Many thanks that works.
It would appear that the only way to adjust the pause is to add time to the
slide as I am unable to slide the pause back. But changing the slide of 3
secs to 3.1 does work.
Is there an easy way to do this for ALL slides or do I just have to do it
one by one.
Again many thanks
Andy
Jeddah by the sea, Saudi Arabia.

Want to restrict operation confirmation without goods issue

Without issuing goods for the production order confirmation of operations is possible. I want to restric this. Where can we do this in configuration.
Thanks in advance.

Dear Lokavya,
Check this link ,
Re: GR restrict before Confirmation & Confirmation restrict before GI
Also check with this user exit,
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
Regards
Mangalraj.S

Search Results not working as expected with Site.URL Filter

I have a page (SharePoint 2013 - Foundation) with a search Results web part. In that web part I have added a filter to limit the results to the specific site (and it's children). So my Query text is:
{searchboxquery} Path:{Site.URL}*
This works.. except for one thing. I'm guessing here but I think the "Site.URL" is returning the site that contains the search results page and not the site that actually started the search!
What I'm trying to do is mimic the default search behavior where a search only contains results from the current site down. So for example
\sites\mySite\mySubSite
If I'm on mySite and search, I should get everything from mySite + mySubSite. However if I am in the mySubSite when I search, I should only get results from mySubSite and NOT the parent mySite.
Added info:
the actual 'search center' is at the \sites\mysite level. Per MS documentation it states that {Site.URL} is the site from where the query was issued. To me that means that if I am on \mysite\mySubSite and initiate the search there, that it should only include
results mySubSite which it is not doing
Here is a screen shot.. I should not be getting any hits

Hi,
In SharePoint 2013, we could configure Result source to limit searched to certain content or to a subset of search results. This would be equal to a new search scope in SharePoint 2010.
For your reference:
http://technet.microsoft.com/library/jj683115(v=office.15)
http://blogs.technet.com/b/tothesharepoint/archive/2012/10/09/build-a-specialized-search-experience-in-minutes-with-sharepoint-2013.aspx
Using sample below will limit search result in subsite:
{searchTerms} path:http://sp/sites/mysite/subsite
Regards,
Rebecca Tu
TechNet Community Support

SSH without a password not working (Public Key)

Hi,
I am trying to setup some unattended backups to my server using an SSH public key, but everytime I try to SSH in I get prompted for my password. These are the steps I followed...
1. I created my the public key on my client system using the following command:
ssh-keygen -t dsa
I left the passphrase empty
2. I verified that my private and public key were created in ~.ssh
3. On my home directory on my server I created the folder .ssh and set the permissions to 0700, and the authorized_keys file with the permissions of 0600.
4. I next used the command
ssh remote_host "echo $(cat ~/.ssh/id_dsa.pub) >> ~/.ssh/authorized_keys"
5. I next verified that my key was added to authorized_keys file on the server.
6. then I try to ssh, but I am still asked for a password.
I have set this up many times on my Linux server without an issue. Is there something in the ssh_config file that I need to change on OS X Server 10.5.8?
Thanks!

I am still working on this one, and would love some input. I tried the ssh -vv command, and it appears that the key is just not being accepted. At I tried creating both a dsa key, and an rsa key, but neither worked. Here is some of the output of the -vv option...
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/sford/.ssh/identity
debug1: Offering public key: /Users/sford/.ssh/id_rsa
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
debug1: Offering public key: /Users/sford/.ssh/id_dsa
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: inputuserauth_inforeq
debug2: inputuserauth_inforeq: num_prompts 1
Does anyone see anything that stands out?

Why does Updatable Results not work with IOTs? This question has not been asked!

I have looked at the notes
http://technet.oracle.com/doc/oracle8i_816/java.816/a81354/resltse2.htm
and there is no mention of an IOT restriction, but when I execute the updateRow I get the READ ONLY ResultSet error.
Can Oracle verify that this is a problem?

I just spent the day tackling the same problem except with rs.deleteRow() instead of rs.updateRow().
I created two tables that are exactly the same except that one is an IOT and the other is not. They contain the same data. I was able to delete row(s) using rs.deleteRow() in the not-IOT but was unable to delete rows in the IOT. Instead I caught the "Invalid operation for read only resultset: deleteRow" exception error.
Does anyone else know what the problem is here?

Operation confirmation without inspection results - not working

Similar Messages

Maybe you are looking for