Opmnctl status command missing?

Hello,
I'm installing a 3-tier OCS9.0.4 Collaboration Suite on Windows 2003 Server and I just finished installing the infrastructure tier. The installation was successful.
I'm following the Application Server 10g Administrator Guide to verify the installation. Task 4 of section 1.4 specifies to run the opmnctl status command to verify that the opmn services are running.
I go to the bin folder C:\ocs_infra\opmn\bin (c:\ocs_infra is my Oracle Home) and run the command "opmnctl status". The result of this is that opmctl returns with the usage information. It does not list the status, ping or validate commands and trying any of these commands results with the usage information shown.
Why am I missing the status command? Is there a way to get it back? Is there another way to verify which opmn processes are running?
Thanks,
Ana

OCS 9.0.4 is usually based on 9iAS 9.0.2.(3). This means you will have to follow the instructions in the 9.0.2 documentation:
http://www.oracle.com/technology/documentation/ias.html
Not all components are managed by OPMN/DCM. For example, OID, is started by hand. There are even startup/shutdown scripts on MetaLink for all components, including some 'wait' loops because you cannot fire them in a row.
But why all this archeology, instead of installing a current version?

Similar Messages

  • ./opmnctl status shows

    Hi
    OAS
    ./opmnctl status shows
    ./opmnctl: line 1: /oracle/OracleAS/opmn: is a directory
    but components shows up in EM console
    unable to check the system componenets status by using command
    ./opmnctl status
    Thanks,

    Hi chris,
    Thanks for your response..
    the path settings are fine.
    I have checked the OAS services on linux like
    cd ORACLE_HOME/opmn/bin
    ./opmnctl status
    This worked fine before,but now its giving some different msg
    ./opmnctl: line 1: /oracle/OracleAS/opmn: is a directory
    and how do i check the path settings that u specifed
    Pls suggest me soon ,this is our production server.
    Thanks,
    Azeem

  • Opmnctl stopall command

    Hi friends
    When i give opmnctl stopall command in my application server it takes more than 25 min to get stopped completely. In the mean time when i check opmnctl status only OC4J and DCM-Daemon process is alive and all others are stopped. Some time i go to process manager and kill the session forcefully. Please let me know why this OC4J takes more time to get stopped and what should i do so that opmnctl stopall command completes quickly.
    With Regards
    M C Jayanarayan

    Sometimes this happens when there are more number of applications active and running on that particular oc4j instance.
    Stop the applications manually and then try to stop the oc4j container. This will help to narrow down the issue.

  • Error OTF end command // missing in OTF dat

    Hi
    I am converting a smartform of a PO into a PDF. when i am using the option of pint immediately in message option of PO. I am getting this error OTF end command // missing in OTF dat . when i am using option 3 which in not print immediately. i am able to convert it into pdf file and save in my local folder. please advice.

    when you click the message button while creating a PO. it will take to next page where you add your output type that is output, partner etc.. after you add and click on further data button there you will have option for dispatching here when you add slect option 4 whihc is print immediately. then i am getting the error. if i am using the other options i am able to down load into pdf but not able to see print preview. please advice

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

  • Photoshop and Illustrator batch commands missing in Bridge CS6

    Photoshop and Illustrator commands missing (eg batch and Live Trace) in Bridge CS6 tools, but they are there in CS5.
    Any thoughts
    much appreciated regards
    Tim

    So I deleted/uninstalled all versions of bridge then photoshop, but Bridge would not even install with PS cs5 (maybe it never did, there was no option on install).
    In the CS4 suite there was a separate option to install or uninstall Bridge, for CS5 they changed this as combined install with PS.
    There are many options for buying separate applications or combinations (Suite) of Adobe Products but according to the Adobe Site Bridge is delivered also with the separate applications Indesign, Illustrator, Flash, Premiere Pro, After Effects and Incopy.
    Usually when having a complete Suite it is delivered with one of those applications.
    Bridge should be able to communicate with all applications from the same CS version, but uses start up scripts for that applications.
    When doing normal installation those scripts should be placed in the correct location automatically.
    Having different suite versions on your system it will not be easy to make them communicate with each other through one version of Bridge (sadly enough you can also have only one version of Bridge active at the time and different versions of Bridge use different cache folders).
    Don't have experience with scripting but maybe the dedicated Bridge scripting forum (link in previous post) can help you out for the answer of customized start up scripts or if it is possible at all.

  • OTF end command // missing in OTF data when using CONVERT_OTF_2_PDF

    Hi
    When using the function module CONVERT_OTF_2_PDF I am getting the strange scenario that for some users it is giving the error message "<u><b>TD 030: OTF end command // missing in OTF data</b></u>". 
    I am executing this function module using the OTF output data received from a smartform executed with the parameter control-parameters-getotf = X and I am not formatting it in any way.
    any assistance in this is much appreciated.

    hi
    good
    go through this link,which ll give you detail idea about this function module
    http://www.jt77.com/development2/programming-07636.html
    thanks
    mrutyun^

  • Workflow status is missing from the List after make some change in workflow

    Hi,
    We have this strange situation where the workflow status is missing from List views. Here is the situation:
    Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Completed" etc.
    When i make some workflow modification and after i save and publish. The workflow status in List will missing.
    This issue happening  is intermittent.
    Why does this happen?
    Any workaround/findings for the above scenario are much appreciated.
    Thanks
    JWei

    Hi JWei,
    The workflow status column gets created when you first create the workflow and its first instance runs. The columns gets removed (and disappears from the view) if you delete the workflow or remove all instances of the wf on the list.
    Please check whether you created some lookup columns in this list. If yes, please increase the lookup threshold for that web application in Central Administration.
    Please create a new view which only contains the Title column and Workflow Status column, modify the workflow, check the workflow status column in the new view, compare the result.
    Please create a new list, create a workflow, and test again, compare the result.
    Please check if the link below is useful for you:
    http://naimmurati.wordpress.com/2013/11/11/workflow-progress-column-missing-in-a-document-library/
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • "Edit In Photoshop" command missing

    I bought Lightroom and Photoshop Elements 10 last year (downloaded LR v4.3 yesterday) and sat down to learn how to use them together today (www.lynda.com Using Lightroom and Photoshop Together with Jan Kabili).
    When I open LR the Photo -> Edit In -> Edit In Photoshop command is greyed out (non-functional).
    I tried both solutions listed under 'Solution 3: On Mac OS' on the following help page including uninstalling and re-downloading and installing PS Elements 10 and it is still not working:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html
    Please advise how to make your programs work together.  Surely, with Photoshop Elements installed and running on my computer Lightroom must be able to notice it.
    Bill.

    I just realised what I was doing wrong.  I installed Photoshop Elements 10 but I was launching Photoshop Elements Editor not Photoshop Elements.  I had no idea there were multiple applications!  Now that I have launched the main Photoshop Elements Application (it then brings up a dialog where you select organize or edit) the "Edit in Photoshop Elements 10" menu item has appeared as expected in Lightroom.

  • OTF end command// missing OTF data

    Hi all,
    I created one PO smartform and assigned it to a driver program its execting fine in one development client.
    When I try to execute the same smartform in another development client its showing  "OTF end command// missing  OTF data".
    In the driver program there's FM " CONVERT_OTF_2_PDF".But still its showing the error when I run the tcode me9f to send the form through mail and even when checking the print preview.
    what could be the reason? Do I have to make any changes in  the FM CONVERT_OTF_2_PDF in the another dev client?
    Please answer
    Thx

    Every OTF data has "//" in begining and "EP //" in the end. Are you modifying the OTF internal table before passing it to the FM for PDF conversion? Check the content of OTF in debugging mode.

  • While converting smartform output toPDF: end command // missing in OTF data

    Hi,
    While Converting smartform output to PDF i am getiing the following error.
    end command // missing OTF data . And also in the importing parameter of smartform  function module also (job_output_info ) i did not findout the data. Where did i make a mistake. How can i correct this error. Thanks in advance.

    Implemented SAP Note 1123505 - OTF-PDF conversion.

  • Archive Smartform Copies - Error - OTF end command // missing in OTF data

    Hi All,
    We are printng invoices and archiving them at the same time.
    When I try to print and archive just the original invoice it works fine
    That is , it prints and archives.
    However when I set the flag SSFCOMPOP-TDARCCOP to 'X'  (Archive Copies as well),
    I get the error OTF end command // missing in OTF data.
    Im guessing that the system tries to archive multiple copies and the End of File Command // at the end of each copy is causing the issue. But I dont know how to go about solving it.
    Regards,
    Nehal.

    Implemented SAP Note 1123505 - OTF-PDF conversion. Archiving several copies

  • CL20N Status changed: missing values for required chars for ROH & FERT

    Dear Expert,
    I am getting this message no. CL500 (Status changed: missing values for required chars) when I try to save variant class (Class type 300) assignment to material master (Raw Material) with Released 1 status in CL20N; but I do not get this message during assignment for FERT. I can save a FERT with Released1 status to a variant class without any system message. I am using configurable material in purchasing and this message is not valid in this case. Is there anywhere I can turn off this message for raw material just like FERT?
    Regards,
    HK

    Hello Han Keat,
    There are notes for this error message. Can you please check note 1537443 and 1431600 if it is in your system
    Thanks Amber

  • Opmnctl status in linux server

    Hi all,
    All the services in OBIEE 11.1.1.5 are not starting up in my Linux Server. So when I'm trying to see my OPMNCTL status in terminal I'm getting the below message.
    can not resolve localhost.localdomain for interface any
    Could anybody suggest on this?
    Thanks in adv.

    hi,
    go thru this http://fusionsecurity.blogspot.com/2011/05/error-message-can-not-resolve-hostname.html
    might be helpful...
    thx

  • Excel x86 2013 status bar missing in SAP

    Hello,
    We are using SAP GUI 7.3 patch 7 and Office Excel 2013.  With this combination, the bottom status bar in Excel does not display. I tried to apply some corrections, but I do not successful.
    My problem is similar to that: Excel 2010 status bar missing in SAP
    Anyone can help me?
    Thank you for everything.

    Hello Douglas,
    I checked this with the standard demo program
    SAPRDEMO_SPREADSHEET_INTERFACE and unfortunately this is a limitation of the SAP inplace
    mode.
    This issue can be replicated outside of SAP by using the FramerEx application by Microsoft which
    can be downloaded for free.
    You can download this from here:
    http://download.microsoft.com/download/vc60pro/mdi/1/win98me/en-us/framerex.exe
    If you use this program and use the File -> Open and select any valid .xls file,it will open in the same manner as the inplace mode in SAP
    You will notice the status bar is missing in this case too.
    This is the same technology that SAP use to display the inplace files.
    Best regards,
    Jude

Maybe you are looking for