"ORA-19554: error allocating device, device type: SBT_TAPE, device name: "

Hi expert.
why I can not delete obsolete?
I have this error:
"ORA-19554: error allocating device, device type: SBT_TAPE, device name: "
but I haven't any tape. How I can remove this from my rman config?
many thanks, as usual.
cheers,
Lain
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oraclesvi/TMP/backup_db_archive/cf_%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/oraclesvi/TMP/backup_db_archive/ora_df%t_s%s_s%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/SvilTMP/dbs/snapcf_DBTMP.f'; # default
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Archive Log          1      28-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_28/o1_mf_1_22_60086j50_.arc
Archive Log          2      29-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_29/o1_mf_1_23_6014bh9j_.arc
Archive Log          3      30-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_30/o1_mf_1_24_603o6gls_.arc
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 06/14/2010 14:43:17
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2

Try
CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;
Werner

Similar Messages

ORA-19554: error allocating device, device type: SBT_TAPE

Running HP DataProtector 6.0. Attempting to configure an Oracle 9i database for backup. Receive the following errors.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on DP_TEST channel at 07/08/2008 13:37:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Recovery Manager complete.
After extensive troubleshooting HP Support reports the following.
"Please contact Oracle and have them explain why RMAN refuses to load our library regardless of if the library is copied into the specific path or called from the softlink."
We tried to run the following without success.
RMAN> run {
allocate channel 'sch1' type 'sbt_tape' parms'ENV=(SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so)';
Thanks in advance for any help you can give,
Mark

Verify if the SHLIB_PATH environment variable includes the $ORACLE_HOME/lib path and verify the symbolic link between the libobk.so to the HP DP shared library file.
~ Madrid
http://hrivera99.blogspot.com

ORA-19554: error allocating device, device type: TAPE, device name: ORA-270

Hi everyone, hit errors below when doing rman duplicate database, anyone can assist?
database mounted
released channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=87 device type=DISK
released channel: ORA_AUX_DISK_1
restarting auxiliary database without server parameter file
Errors restarting database
RMAN-00600: internal error, arguments [6007] [] [] [] []
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
RMAN-10035: exception raised in RPC:
ORA-19624: operation failed, retry possible
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device type
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 235
RMAN-10031: RPC Error: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2013 15:51:21
RMAN-05501: aborting duplication of target database
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device type

Hi.
Tried but kenot...
This command will not work if if I execute in duplicate database?
I am now trying duplicate the database from a server to remote server.
using command below
DUPLICATE DATABASE TO NEW_DB_NAME
PFILE = PFILE_LOCATION
BACKUP LOCATION '/DUMP';
NOFILENAMECHECK;

ORA-01704 error form spatial data type (SDO_UTIL.FROM_WKTGEOMETRY)

I am trying to make a program (C# & ODP.NET)to do the task , get geometry data From sqlserver2008 database and INSERT INTO Oracle11 Spatial Database.
Because of using the Well-Known text (WKT) syntax , so I need to use "SDO_UTIL.FROM_WKTGEOMETRY('POLYGON ((56678400..." to insert geometry data to oracle. When the polygon text is longest than 4000 chr, I got the exception
[ORA-01704: string literal too long]
How can we solve this problem? It's urgent!
Hope to hear from you.
Fan

Try with bind variables:
oerr ora 1704
01704, 00000, "string literal too long"
// *Cause: The string literal is longer than 4000 characters.
// *Action: Use a string literal of at most 4000 characters.
// Longer values may only be entered using bind variables.Please read http://www.oracle.com/technetwork/issue-archive/2005/05-sep/o55odpnet-101704.html.

RMAN Delete Obsolete job fails due to Error Allocating Device

Experts, I need help, please.
This is 10.2.0.1 on Windows
RMAN> DELETE NOPROMPT OBSOLETE;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 3 days
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=130 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 05/15/2012 14:10:17
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
I ran RMAN> configure device type 'SBT_TAPE' clear;
but I still get the same error.
I backup to Disk, not tape
Notice the reference to SBT_TAPE:
RMAN configuration parameters are:
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
What do I need to do to be able to run DELETE OBSOLETE; ?
Thanks, John

as anand mention ,you've to reset this parameter to default value.
and clear cmd with configure will remove it from configuration parameter
see below
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
*CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;*
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 05/16/2012 12:04:34
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
RMAN configuration parameters are successfully reset to default value
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=1591 instance=GG1 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=1627 instance=GG1 devtype=DISK
no obsolete backups found

ORA-19554

I testing backup and recovery using RMAN and have run into this error -
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=27 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of crosscheck command at 03/01/2005 20:36:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Backup runs fine, the error occures during restore and maintenance (tried crosscheck). Same problem in two databases, 9.2.0.1 and 10.1.0.3.
I'm using automatic allocating and I guess the problem is there. Here's a list of configured parameters -
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 31 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:\Backup\Oracl
e\TEST10\%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
ult
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'F:\Backup\Oracle\TEST10\%U' MAXPIEC
ESIZE 1024 M;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 1024 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\ORACLE\PRODUCT\10.1.0\DB_1\DATABASE\S
NCFTEST10.ORA'; # default
RMAN>
I'm NOT using tape, so that no MML is not configured. Why does RMAN try to allocate a cannel 'SBT_TAPE'??
Morgan

FYI, according to Metalink Note:284210.1,
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;
should work. However, I had to run both of these commands:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;
According to the note, "RMAN tries to allocate sbt type channels for maintenance command if any of the sbt_tape parameters are set to a non-default value.", so type "show all" and get rid of any lines that contain 'SBT_TAPE'.
One other option, according to Note:271330.1, is to allocate a maintenance channel prior to running the crosscheck (I didn't try this):
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE disk;
crosscheck backup;

ORA-19511: Error received from media manager layer, error text:

Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
Wahid

Hi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid

ORA-02373 error on expdp, table failed to import!!

Hi All,
Would need a little help from you guys. I am trying to take export of an schema, and as the expdp continues, it throws error while exporting one of the tables. I tried looking over the net, but found nothing on this.
I think it is high time to have a say from the pros :) !!
Here goes the error:
=========================================================================
ORA-31693: Table data object "SCHEMA-NAME"."TABLE-NAME" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-02373: Error parsing insert statement for table "SCHEMA-NAME"."TABLE-NAME".
ORA-00904: : invalid identifier
=========================================================================
The DB Server is 11g.
Any kind of help will be greatly appreciated!
Thanks in Advance.
Noman A.

Hi Kumar,
This is the description of the table:
Name Null Type
ID NOT NULL VARCHAR2(64)
COL-1 VARCHAR2(128)
COL-2 VARCHAR2(128)
COL-3 NOT NULL VARCHAR2(64)
COL-4 NOT NULL VARCHAR2(64)
COL-5 NOT NULL VARCHAR2(64)
COL-6 NOT NULL VARCHAR2(64)
COL-7 VARCHAR2(64)
COL-8 VARCHAR2(255)
COL-9 NOT NULL VARCHAR2(64)
COL-10 NOT NULL TIMESTAMP(6)
COL-11 NOT NULL TIMESTAMP(6)
COL-12 NOT NULL CHAR(1)
COL-13 BLOB()
COL-14 VARCHAR2(512)
COL-15 CHAR(3)
Thanks
Noman A.

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)

please help on below error
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)
Source Error:
Line 27: using System.Web.Services;
Line 28: using System.Net;
Line 29: using IBM.WMQ;
Line 30: using System.DirectoryServices.AccountManagement;
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\NBO\LogComplaint.aspx.cs
Line: 29

Hello,
>>using IBM.WMQ
It seems you are using third party dll namespace reference in your project but that dll is not being added in project. Please get the IBM.WMQ dll and add it first in your current visual studio project by right click on project-->add reference.
You can place this dll in GAC or can directly add to project as suggested by jaydeep.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

8520 curve rror: Sqlite Error (schema update): net.rim.device.api.database.DatabaseException: SELECT name FROM sqlite_master WHERE type = 'index' AND name = 'chat_history_jid_index': disk I / O error (10).

Dear team support,
I have a problem with my WhatsApp Messenger.
my whatsapp wont save message history. couse error.
Error: Sqlite Error (schema update):
net.rim.device.api.database.DatabaseException: SELECT name FROM sqlite_master WHERE type = 'index' AND name = 'chat_history_jid_index': disk I / O error (10).
Please advise me how can i solve my memory card issue..
Thanks

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

10g XE: ORA-27102: out of memory, Linux Error: 28: No space left on device

Hi,
I just installed oracle-xe-10.2.0.1-1.0.i386.rpm on a virtual CentOS box. After I run "/etc/init.d/oracle-xe configure", only listener is running, not the instance itself and $ORACLE_HOME/config/log/CloneRmanRestore.log says
ORA-27102: out of memory
Linux Error: 28: No space left on device
According to installation requirements (http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm) I checked
RAM and swap:
[root@56 ~]# free -m
total used free shared buffers cached
Mem: 7961 7453 507 0 39 923
-/+ buffers/cache: 6491 1470
Swap: 16378 7012 9366
Available disk space:
[root@56 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vzfs 2.9G 969M 1.9G 34% /
Kernel params:
[root@56 ~]# sysctl -a | egrep 'sem|shm'
error: "Operation not permitted" reading key "kernel.cap-bound"
kernel.sem = 250 32000 100 128
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 536870912
So it all looks to be OK.
Any ideas what can be wrong?
Thanks,
Radek

rskokan wrote:
The distro version is "CentOS release 5.4 (Final)".
Unfortunately the wmem/rmem params can't be changed, as I learned it's a limitation of the virtual hosting, Virtuozzo. Anyway they are "just" for network setting, not for RAM.Yes - but worthy of noting once you run into your next problem. :-)
>
Couldn't be the problem that I really don't have enough disk space? Only 1.9 GB free.It's unlikely.
I suspect that the SHMMAX setting needs to be increased to 1/2 physical RAM, as described in the doc I referenced.
I suspect the installer is looking at the physical RAM and guessing the target SGA size based on that. It would therefore assume, for DB creation, that it should crank the SGA to around 700MB (1GB max, leave some for PGA, but use some SGA because of SHared Server for APEX)

I've lost my access code for my device and the type of device is the iPad Mini

I lost my access code from may device and the type of device is the ipad mini

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Switch Executive with SCXI "an error occurred while attempting to access device"

I get "an error occurred while attempting to access device" when trying to validate or use the test panel for my current configuration:
PXI-1010 (PXI/SCXI combo chassis)
PXI-4060 in the PXI rightmost slot
SCXI-1129 in slot 1 of the SCXI portion
Clean install of all NI software (2012 DS1 developer suite) and a reset of MAX configuration data after not getting this resolved previously.
Because the SCXI-1129 is being controlled by the 4060 (legacy), I can't use DAQmx in NISE 3.5. So I'm stuck with IVI. I've configured everything in IVI so that I can at least add my device (SCXI_1129) into a new NISE virtual device. But when I go to validate or make a connection in the test panel within NISE, I get the above error.
Am I configuring something incorrectly?
Attachments:
max_report.zip ‏93 KB

Frank,
Thanks for continuing to look at this issue. Here are my responses to your questions.
1) You get an error when your driver setup string in in the General tab of your Driver Sessions is "1129/2-Wire Quad 4x16 Matrix"? Are you using a
PXI-4060 in the right-most slot of a combo chassis. If you're using a DAQmx device, it's a whole different ball game. If you're not using a PXI-1010
combo chassis, it's a different story too.
2) I can't seem to find a way to cleanly export my IVI configuration files. Even the VI you wrote (Programmatically Export All Virtual Devices & IVI
Configurations for NI Switch Executive) didn't copy the IviConfigurationStore files. So I manually copied them over and attached them. When I create
my driver session, I type 3 things: the topology ("1129/2-Wire Quad 4x16 Matrix") in the driver setup string, "SCXI-1129" and "SCXI1::1" in the
hardware tab (It would be "SCXI0::1" if the dip switches on the PXI-1010 were set to address 0, which is the default), and niSwitch in the software
tab for the software module.
3) The error I'm getting is the name of the post. "An error occurred while attempting to access device". It get this when validating my NISE virtual
device when simulation is not checked. It's also peachy-keen for me when I simulate.
4) See the screenshot.
5) Production line down is par for the course for this lab due to how many people have messed with this station in an effort to bandage it over the
years to keep product flowing. Long story, but there has one problem after another on this machine for a while with no owner. I'm now responsible for the automated tests on it. I'm adding new devices because I'm essentially starting from scratch so I know what's going on and can trust it. But apparently I'm either getting the same error they had before or it's a new one. I suspect it's the same one but it "used to work". I had another coworking here yesterday and he opened a phone SR, gave the information, and was told they'd get back to him. I haven't heard anything yet.
Attachments:
IVI export.zip ‏34 KB
SCXI-1129 adding to NISE.JPG ‏36 KB

Linux-x86_64 Error: 28: No space left on device

10gR2 (10.2.0.3)
RHEL 4 AS 64-bit
Hi All,
After I created my RAC database with DBCA, I tried to connect to the database and got the following error:
SQL> startup
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup mount pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
I also tried to do what the following person did:
ORA-27102: out of memory
But changing the SHMALL kernel parameter still didn't change anything...I still got the error.
Any ideas?
Thank you.

(Duplicate thread)
ORA- 27102 out of memory and Linux Error: 28: No space left on device

"ORA-19554: error allocating device, device type: SBT_TAPE, device name: "

Similar Messages

Maybe you are looking for