ORA-19554: error allocating device, device type: SBT_TAPE
Running HP DataProtector 6.0. Attempting to configure an Oracle 9i database for backup. Receive the following errors.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on DP_TEST channel at 07/08/2008 13:37:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Recovery Manager complete.
After extensive troubleshooting HP Support reports the following.
"Please contact Oracle and have them explain why RMAN refuses to load our library regardless of if the library is copied into the specific path or called from the softlink."
We tried to run the following without success.
RMAN> run {
allocate channel 'sch1' type 'sbt_tape' parms'ENV=(SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so)';
Thanks in advance for any help you can give,
Mark
Verify if the SHLIB_PATH environment variable includes the $ORACLE_HOME/lib path and verify the symbolic link between the libobk.so to the HP DP shared library file.
~ Madrid
http://hrivera99.blogspot.com
Similar Messages
-
Hi expert.
why I can not delete obsolete?
I have this error:
"ORA-19554: error allocating device, device type: SBT_TAPE, device name: "
but I haven't any tape. How I can remove this from my rman config?
many thanks, as usual.
cheers,
Lain
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oraclesvi/TMP/backup_db_archive/cf_%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/oraclesvi/TMP/backup_db_archive/ora_df%t_s%s_s%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/SvilTMP/dbs/snapcf_DBTMP.f'; # default
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
Report of obsolete backups and copies
Type Key Completion Time Filename/Handle
Archive Log 1 28-MAY-10 /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_28/o1_mf_1_22_60086j50_.arc
Archive Log 2 29-MAY-10 /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_29/o1_mf_1_23_6014bh9j_.arc
Archive Log 3 30-MAY-10 /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_30/o1_mf_1_24_603o6gls_.arc
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 06/14/2010 14:43:17
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2Try
CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;
Werner -
Hi everyone, hit errors below when doing rman duplicate database, anyone can assist?
database mounted
released channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=87 device type=DISK
released channel: ORA_AUX_DISK_1
restarting auxiliary database without server parameter file
Errors restarting database
RMAN-00600: internal error, arguments [6007] [] [] [] []
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
RMAN-10035: exception raised in RPC:
ORA-19624: operation failed, retry possible
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device type
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 235
RMAN-10031: RPC Error: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2013 15:51:21
RMAN-05501: aborting duplication of target database
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device typeHi.
Tried but kenot...
This command will not work if if I execute in duplicate database?
I am now trying duplicate the database from a server to remote server.
using command below
DUPLICATE DATABASE TO NEW_DB_NAME
PFILE = PFILE_LOCATION
BACKUP LOCATION '/DUMP';
NOFILENAMECHECK; -
RMAN Delete Obsolete job fails due to Error Allocating Device
Experts, I need help, please.
This is 10.2.0.1 on Windows
RMAN> DELETE NOPROMPT OBSOLETE;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 3 days
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=130 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 05/15/2012 14:10:17
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
I ran RMAN> configure device type 'SBT_TAPE' clear;
but I still get the same error.
I backup to Disk, not tape
Notice the reference to SBT_TAPE:
RMAN configuration parameters are:
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
What do I need to do to be able to run DELETE OBSOLETE; ?
Thanks, Johnas anand mention ,you've to reset this parameter to default value.
and clear cmd with configure will remove it from configuration parameter
see below
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
*CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;*
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 05/16/2012 12:04:34
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
RMAN configuration parameters are successfully reset to default value
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
RMAN> delete obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=1591 instance=GG1 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=1627 instance=GG1 devtype=DISK
no obsolete backups found -
ORA-01704 error form spatial data type (SDO_UTIL.FROM_WKTGEOMETRY)
I am trying to make a program (C# & ODP.NET)to do the task , get geometry data From sqlserver2008 database and INSERT INTO Oracle11 Spatial Database.
Because of using the Well-Known text (WKT) syntax , so I need to use "SDO_UTIL.FROM_WKTGEOMETRY('POLYGON ((56678400..." to insert geometry data to oracle. When the polygon text is longest than 4000 chr, I got the exception
[ORA-01704: string literal too long]
How can we solve this problem? It's urgent!
Hope to hear from you.
FanTry with bind variables:
oerr ora 1704
01704, 00000, "string literal too long"
// *Cause: The string literal is longer than 4000 characters.
// *Action: Use a string literal of at most 4000 characters.
// Longer values may only be entered using bind variables.Please read http://www.oracle.com/technetwork/issue-archive/2005/05-sep/o55odpnet-101704.html. -
Getting the error ORA-27001: unsupported device type
Hi ,
While I am starting to backup via RMAN I am getting the following error. I kept my backup files on my disk and configured the channel as
RMAN> SHOW DEFAULT DEVICE TYPE;
RMAN configuration parameters are:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN> restore tablespace user_undo;
Starting restore at 19-DEC-06
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/19/2006 17:00:36
ORA-19554: error allocating device, device type: DISC, device name:
ORA-27001: unsupported device type
When I checked in the v$backup_device its giving my the following result
SQL> SELECT * FROM V$BACKUP_DEVICE;
DEVICE_TYPE
DEVICE_NAME
SBT_TAPE
Could anyone please help me out.
ThanksRMAN> SHOW DEFAULT DEVICE TYPE;
RMAN configuration parameters are:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN-03002: failure of restore command at 12/19/2006
17:00:36
ORA-19554: error allocating device, device type:
DISC, device name:> ORA-27001: unsupported device type
Is it possible that you have line similar to the following when you enter
show all;
CONFIGURE CHANNEL DEVICE TYPE DISC FORMAT <path> -
I testing backup and recovery using RMAN and have run into this error -
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=27 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of crosscheck command at 03/01/2005 20:36:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Backup runs fine, the error occures during restore and maintenance (tried crosscheck). Same problem in two databases, 9.2.0.1 and 10.1.0.3.
I'm using automatic allocating and I guess the problem is there. Here's a list of configured parameters -
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 31 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:\Backup\Oracl
e\TEST10\%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
ult
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'F:\Backup\Oracle\TEST10\%U' MAXPIEC
ESIZE 1024 M;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 1024 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\ORACLE\PRODUCT\10.1.0\DB_1\DATABASE\S
NCFTEST10.ORA'; # default
RMAN>
I'm NOT using tape, so that no MML is not configured. Why does RMAN try to allocate a cannel 'SBT_TAPE'??
MorganFYI, according to Metalink Note:284210.1,
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;
should work. However, I had to run both of these commands:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;
According to the note, "RMAN tries to allocate sbt type channels for maintenance command if any of the sbt_tape parameters are set to a non-default value.", so type "show all" and get rid of any lines that contain 'SBT_TAPE'.
One other option, according to Note:271330.1, is to allocate a maintenance channel prior to running the crosscheck (I didn't try this):
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE disk;
crosscheck backup; -
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
Unable to allocate channel device type sbt
Hi,
This is my first post on this forum so please advice me if I do something stupid.
This oracle instance is version: 11.2.0.1
Running on RHEL 5.6
So, my problem is that I can't allocate sbt channel/device to crosscheck archivelogs.
We are using Symantec's Backup Exec to manage your backups, and by looking it's log's (attached below) this should work. What I'am missing?
Command I'm trying to run:
RMAN> allocate channel for maintenance device type stb;
ORA-27211: Failed to load Media Management Library
I have check't the libobk.so is link'd from $ORACLE_HOME/lib/libobk.so -> VRTSralus/bin/libobk.so.
BE's log:
RUN {
ALLOCATE CHANNEL ch0
TYPE 'SBT_TAPE';
SEND '**************';
BACKUP
INCREMENTAL LEVEL=0
FORMAT 'BE_U'
DATABASE FORCE PLUS ARCHIVELOG FORCE NOT BACKED UP DELETE INPUT;
BACKUP CURRENT CONTROLFILE
FORMAT 'BE_U';
RELEASE CHANNEL ch0;
connected to target database: PROD
using target database control file instead of recovery catalog
allocated channel: ch0
channel ch0: SID=3987 device type=SBT_TAPE
channel ch0: Symantec/BackupExec/1.1.0
sent command to channel: ch0
Thanks for your help
Kalle
P.S. Moved from General questions to RMANim not familiar with Symantec's Backup Exec, but i think you are missing the SEND part in your manual allocation (which is present in the backup log)
You can specify media management parameters in RMAN backup and restore jobs by the following means:
Environment variables, which are specified with the ENV parameter of the PARMS option on the CONFIGURE or ALLOCATE CHANNEL commands
The RMAN SEND command -
Spool - device type or format type without page breaks
Hi SAP experts,
We have users in our production system running report S_ALR_87012284 on background and then it generates a spool with page breaks in it.
Users were using output device LOCL (device type: SAPWIN) with format X_65_255.
Is there a SAP-standard device type or maybe format type where page breaks are eliminated?
And if none, how should I create a device type or format type that would not have any page breaks at all?
Thanks in advance for your help.
Regards,
Kris CaldozaHi,
The RDI Output Mode is blank in all of our System i.e. pre-procuction, dev and Production.
In transaction EA60, there is a button as Print Parameter.
In production system if we select any of the following it gives the same error.
"Device type PLAIN does not support page format DINA4"
Options are:
1. Sap Script Form Settings are Decisive.
2. Raw Data Interface (Output Mode Spool).
3. Raw Data Interface (Output Mode IDOC).
4. Raw Data Interface (Output Mode: Spool (Simple RDI))
5. SAPscript Preparation (OTF).
But, in our Pre-production or dev if we select the First Otion i.e 1
it is giving the same error. but, when selecting the second one it is working.
But, in Production if selecting the option 1 and 2, it is giving the error.
Since the SPAD settings, SapScript Form Settings, Code are exactly the same in all the system.
So, is there any configuration related to it?
Thanks for your valuable advice,
Parthow.. -
RMAN-06466: error parsing configuration string (CONFIGURE DEVICE TYPE DISK
Hi All
Windows 2003 and 10.2.0.4
I get the following message when executing show all; connected to rman
(I have used grid control 11g for the first configuration of rman. Not sure if it has an impact.)
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of show command at 09/22/2011 16:04:11
RMAN-12010: automatic channel allocation initialization failed
RMAN-06466: error parsing configuration string (CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO BACKUPSET PARALLELISM 1;)
RMAN-01005: syntax error: found "backup": expecting one of: "clear, parallelism"
RMAN-01007: at line 1 column 28 file: Configuration Row
RMAN>
Reading the manual Database Backup and Recovery Basics
I should be able to configure it like this
RMAN> CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "backup": expecting one of: ";"
RMAN-01007: at line 1 column 42 file: standard input
Anyone that can help me with this ?
Appreciate your feedback.
Thanks
MagnusWhat happens if you type "CONFIGURE DEVICE TYPE DISK CLEAR;" ?
-
Textbook download error message: "Document is not licensed for this device type"
Hi everyone,
I bought a textbook that came with a free digital edition. I downloaded it, then tried to load it into Digital Editions (which I registered to my account). The texbook almost finished importing, then at the very end gave me an error message that said "[The name of the book]: Document is not licensed for this device type." The textbook is published by Aspen Law. I'm running Mac OS X 10.7.1 (Lion). Has anyone else had a similar issue or know of a resolution?
I've looked at other forum posts, and my situation seems remarkable like this one:
http://forums.adobe.com/message/3098928#3098928
I called the publishing company and tried to explain this to them, but they just said it was a problem with Adobe and Mac.
Thanks in advance,
ChrisOK - here's the issue.
When I downloaded Adobe Digital Editions I authorized my computer with my Adobe Account - apparently I wasn't supposed to do that. McGraw-Hill said that their file would ONLY work if the computer was not authorized with an Adobe Account (they should have said so after the order).
So after de-authorizing the account (ctrl+shift+d) I tried to open up the .acsm file again and I got a new error: e_lic_already_fulfilled_by_another_user. I'm afraid that the license was used up by Adobe Account, never mind that it actually never downloaded.
I guess the next step is to try and get another license issued? -
Error: Device type SWIN does not support page..
Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-DharmeshHi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick -
Hi as anyone come across the following or a similar error and found a solution?
SPICE Netlist error, element 'that4301:':Not enough terminals for device type 'Tranline'
The element that4301 is a vca I imported a model for.Here's the model for the VCA:-
*THAT4301 VCA MACROMODEL
*CONNECTIONS:
* Iin - Current Input
* | Ec+ - Positive Control Port
* | | Ec- - Negative Control Port
* | | | Sym - Symmetry Adjust Terminal
* | | | | Vcc - Positive Supply Voltage
* | | | | | Vee - Negative Supply Voltage
* | | | | | | Iout - Current Output
* | | | | | | | GND
* | | | | | | | |
.SUBCKT 4301VCA_THAT P17 P15 P16 P14 P11 P10 P13 P9
J1 3 P17 1 FET 4
J2 4 P9 2 FET 4
CIN P17 P10 50pF
RS1 1 7 2.4K
RS2 2 7 2.4K
I1 P11 7 120uA
C2 3 4 20pF
RD1 3 P10 1K
RD2 4 P10 1K
GA P11 8 4 3 .001
RC1 8 0 12.6MEG
CC 8 5 55pF
RC2 5 P10 3K
EA P11 9 8 0 1
RA 9 10 820
CZ 9 10 300pF
Q1 10 10 11 QNPN
Q2 10 10 12 QNPN
RE1 11 13 1
RE2 12 14 0.9
Q3 P17 P15 13 QPNP
Q4 P13 P16 14 QPNP
Q5 P17 P16 15 QNPN
Q6 P13 P14 16 QNPN
RE3 15 17 1
RE4 16 18 0.9
Q7 19 19 17 QPNP
Q8 19 19 18 QPNP
COUT P13 0 35pF
I2 19 P10 6mA
IBIAS 0 6 30uA
Q9 6 6 20 QNPN
Q10 0 0 20 QPNP
EBIAS 10 19 6 0 2
.MODEL FET PJF(VTO=-1.46 BETA=1.67E-4 IS=10E-14)
.MODEL QNPN NPN(IS=6E-15 BF=250 VAF=95 CJE=7.5pF CJC=2.7pF)
.MODEL QPNP PNP(IS=4.7E-14 BF=125 VAF=50 CJE=20pF CJC=33pF)
.ENDS -
Error - Device type unsuitable for ADS documents
Hi,
I have created a print form using transaction SFP and i am doing test from transaction SFP
(Test function module )
/1BCDWB/DOCPARAMS
YCTC 0000000000
YCTCUSAGE 0000000000
Once i press f8 system asking for printer, then i have given printer name as LOCL and select print preview. then system giving error as
Cannot find PDL type for output device locl and Device type unsuitable for ADS documents
Can i anybody give info what i am doing wrong.
I have tested with FP_TEST_03 that also giving the same error
a®Hi,
I have tried with LP01 and with some other printers in the network its giving error that "Call contained error (02)"
I tried with all FP_TEST*
but no results
a®
Maybe you are looking for
-
Hi I have a table like this 12933 Contracting Process 12958 Owner Scope Process 12934 Licensing and Permissions Process 13036 Construction Licence Process 12935 Technical Process
-
Only 0 serial numbers entered instead of 30
Hi Experts, I am facing one problem during Usage decision in QA32 TRANSACTION, After saving the Usage decision , the system saying that +'Only 0 serial numbers entered instead of 30'+, due to that i am unable to save the usage decision so that goods
-
Post Author: Camille CA Forum: General Can you please tell me the difference in Crystal ActiveX Report Viewer Control 11.5 COM component and Crystal Report Viewer 11.5 .Net component? My application is a Windows application using VS2005. Thanks!
-
Passing a generic rowtype, convert to XML
We're currently storing some data in a XMLType column. For the originally intended purpose, we had access to a dynamic SQL statement, via a refcursor and so we've been able to use DBMS_SQL to retrieve column names from those SQL statements. Then we c
-
Icloud photo library on windows pc not syncing
I have an iPhone 6 and activated iCloud Photo Library. I downloaded and installed iCloud for Windows on two different PCs. Neither of those PCs have all of the photos in their iCloud Photo Library that are on my phone. There are 316 pictures on