Oracle 11 under Windows 2008 installation problems

I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
The procedure has been as follows...
- Windows 2008 was installed
- Oracle 11.2.0.1.0 was installed
- listener.ora, sqlnet.ora, tnsnames.ora were modified
- no other Oracle configuration file was touched
At this point it worked. I could connect with SQL Plus and with SQL Developer.
Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
--- LISTENER.ORA ---
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
--- SQLNET.ORA ---
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (NTS)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ORA ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
--- LSNRCTL status ---
C:\Users\admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 25-SEP-2010 11:24:54
Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
Der Listener unterstützt keine Services
Der Befehl wurde erfolgreich ausgeführt.
Michael G. Schneider

Deleting the three configuration files and recreating them with "Net Manager" gives...
--- LISTENER.ora ---
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- SQLNET.ora ---
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ora ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
Michael G. Schneider

Similar Messages

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

    Dear all,
    while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
    we are getting error as not support.
    please confirm wether this version of OS is uspported or not.
    thanking you in all,
    by
    Animesh

    actualy we tried to change Oraparam.ini file in the installation folder...
    edited ...  windows= 5.0, 5.1, 6.0
    we had entered 6.0
    Yes - that is necessary.
    and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
    Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
    if you suggest us to use 2003 64 bit for temporaray .... purpose.
    and is there any specified procedure to UPgrade OS.
    like... DB should be updated before OS upgradation.
    You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
    The question you have to ask is:
    Why do you need Windows 2008? Is there any technical implication?
    Markus

  • Acrobat reader X with thunderbird under windows 2008 server

    Hi,
    i use acrobat reader X under windows 2008 R2 . My Mailclient is thunderbird.
    I get an error when trying to send an E-Mail. "Acrobat could not get a connection to your e-mail programm".
    I defined thunderbrid as the standard mailprogramm under START->CONTROLPANEL->STANDARD-PROGRAMMS
    I already tried to google the solution, but the only one i found was for Windows VISTA and Windows 7. There, you have not only to define the STANDARDPROGRAMM, you either need to make a change on "default programms and computerstandards" which is missing in windows 2008 R2
    Can anyone please tell me how to use acrobat with thunderbrid in a windows 2008 environment????
    Thank you

    Hi Michael,
    sorry for using the wrong forum. I'll post my question to the Reader board ...
    To answer your question. That was my idea too, but it is not possible to copy a whole profile. They are a lot of other problems if you do that. I didn't find the settings only. may it would be enough to copy the settings for the reader.
    Best Regards,
    Markus

  • Oracle Failsafe + 11G + Windows 2008 Enterprise r2 64bits

    Dear Friends,
    I need to install a Oracle Fail Safe system on Windows 2008 Enterprise r2 using Oracle 11g, I have some question about this:
    1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.
    2-There is a version for 64bits system of the Oracle FailSafe?
    2-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?
    Thanks for all the answer.

    1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.Oracle Fail Safe environment recommends installing database software on a two-node cluster, so it is possible with 11G
    2-There is a version for 64bits system of the Oracle FailSafe? 3-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?Other two answers are given in the pdf at http://download.oracle.com/docs/cd/E10736_01/doc/relnotes.341/e10719.pdf. you must go through it thoroughly.

  • Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

    Hi,
    I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
    Thanks in advance.
    Sujith

    Hi Sujith;
    I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
    All doc avaliable at:
    http://www.oracle.com/pls/db112/homepage
    Regard
    Helios

  • Install Oracle 10g on windows 2008 Server 64bit

    Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
    windows server 2008 Oracle 10G 64 bit
    before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
    "OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    O/S-Error: (OS 1) Incorrect function. ! "
    if it is possible which version I want to download is best ..
    and what is the recommendation whether it is 10g or 11g

    You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
    Furthermore like Aman told you, It's more recommended install 11gR2 version
    Edited by: Fran on 29-may-2012 4:20

  • Can't install oracle 10g on windows 2008 R2

    Please help me
    I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
    and oracle 11g i not license
    Where can download file oracle install 10.2.0.4
    thank you

    user9357585 wrote:
    same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
    Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

  • How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

    How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
    How many database will play in this role.
    Best,

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • Oracle 11GR2 on windows 2008 Geo-Dispersed cluster

    Hi all,
    anyone can guide me about the installing oracle 11GR2 on windows 2008 Geo-dispersed cluster environment? Please guide and provide documentation if possible,
    thanks

    By "geo-dispersed", do you mean a cluster with servers is physically remote locations ? If so, the install process does not care about how far apart the servers are physically. Follow the standard install doc at http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/toc.htm
    Srini

  • Performance problems on a Oracle 11G with Windows 2008 64bits.

    Hi everyone,
    I have noticed that our db is going low and low every week. My server has 16GB RAM and 10GB are dedicated to the Oracle database, this is a 11.2.0.1 with Windows 2008 R2 SP1 64bits. I like to know acording to the nexts values what you guys recommend to adjust in the init.ora:
    orcl.__db_cache_size=5402263552
    orcl.__java_pool_size=33554432
    orcl.__large_pool_size=33554432
    orcl.__pga_aggregate_target=3657433088
    orcl.__sga_target=6878658560
    orcl.__shared_io_pool_size=0
    orcl.__shared_pool_size=1308622848
    orcl.__streams_pool_size=33554432
    *.memory_target=10511974400
    *.open_cursors=5000
    *.optimizer_mode='RULE'
    *.processes=300
    Acording to the memory target on how values can be increased the processes, pga_agregate_target, etc.
    Also we have problems related to the bug Bug 9593134 that “Connections to Oracle 11g are slow and can take anywhere from 10 seconds to 2 minutes.” there is a fix on linux by removing the dns names on it but anyone have experience on windows platforms?
    Thanks for all and sorry for my english.
    Regards.
    Arturo.

    Regarding the long connection times, have you tried using network packet capture software (such as Wireshark) to determine what the client computer is doing when a connection attempt is initiated?
    The Oracle Database time model statistics, along with the system wide wait events may help you diagnose the non-connection related performance issues (you should not just look at the statistics, but instead capture the current values, wait a period of time, capture the statistics again, and compare the changes in the statistic values). A statspack report might also help you - but a 10046 trace at level 8 or 12 is more appropriate if you are able to identify a couple of sessions that experience performance problems.
    I do not suggest just blindly modifying parameters, although I am curious to know:
    * Why the session level parameter OPEN_CURSORS is set to 5000 - do you expect a single session to hold open 5,000 cursors?
    * Why are you using the deprecated RULE based optimizer?
    * Why is the MEMORY_TARGET parameter used when the SGA_TARGET and PGA_AGGREGATE target are specified?
    Charles Hooper
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Grid Infrastructure installation on Windows 2008 R2 problem

    Hello there,
    I tried to install Grid Infra 11gr2 on windows 2008 R2. I followed all the documentation, but i'm unable to install it. It always end with an error at the grid configuration step (OracleOHService ends unexpectedly, ohasd log says "caught exception"). I've got an SR opened, no answer for the moment ...
    Did someone a least managed to install grid infra on 2008 R2 ?
    It is certified, 2008 R2 is mentioned in the documentation, this is not my first RAC installation on windows (10g, 11gr1 on 2003, 2008 R1). But this time I'm totally stuck.
    PS : I love Linux.

    Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
    If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
    Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
    Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

  • Dataguard installation oracle 11gr2 on windows 2008 server

    Hi,
    I have oracle 11gr2 database on windows 2008 server. I have been given a primary and secondary server with the same setup.
    Now i want to install dataguard. AFter installing i need to test it for disaster recovery.
    Can anyone please suggest me a document for this? I searched in this forum but i couldnt get any.
    Please help.

    An obvious place to look at is our Online Documentation about Data Guard Installation:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/toc.htm
    See
    3 Creating a Physical Standby Database
    there.
    There is not much special-Windows for Data Guard - of course you need to create Windows Services for both Databases etc. as described here:
    http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • Oracle 10g on Windows 2008 Server Std. edition

    Hi all
    We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
    We try to install Oracle 10g 32 Bit - We get the following problems
    a) By default it should take the highest partion i.e d:\oracle\product etc.
    but it takes c:\users\administrator\documnets\oracle\product which is wrong
    However we correct it by typing the correct path. Brows does not take to D partition
    b) On proceeding further - >Installation aborts and and we get messages
    unknowkn , unknown etc. for 3-4 aspects.
    Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
    User connected was administrator while installation of Oracle 10g 32 Windows.
    We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
    Kindly suggest some remedy
    Suresh Bansal

    With due respect i wish to request you to please see below thread:
    Re: Oracle 10g
    Which is making me confused.
    Regards
    Girish Sharma
    There's a specific version for Windows 2008 (10.2.0.4), ready to download:
    http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

  • Install Oracle 11 On Windows 2008 Cluster

    Hi,
    I am planning to go for the installation of Oracle 11g R2 on Microsoft Windows 2008 cluster.
    Can any one suggest me how can i go with the installation.
    I have done Oracle 11g R2 RAC implementation and Oracle 11g R2 on dedicated microsoft Servers.
    Can anyone help me out to sort out this problem.It would be helpful for me.
    Is there any documentation on this.
    Regards
    Bobs

    Hi all,
    I have just got a link which might help me and others.
    http://download.oracle.com/docs/cd/E16161_01/doc.342/e14976/toc.htm
    Regards
    Bobs

Maybe you are looking for

  • HOW TO  SET A DEAFULT  VALUE  FOR A FIELD?

    hi friends   i have doubt..how to  set a default  value for a field..say  like in  local printer field i always want  lp01 to  be displayed defaultly..when i  click  F1  in that  field i  get the parameter id ..i  know there is something  dealt with

  • Compatible external displays for Mac Mini

    I just purchased the Mac Mini (Mid 2010 Build) and would like to use an external display aside from the displays sold at the Apple Store. What are the compatible displays (monitors) for the Mac Mini (Mid 2010 Build)? With these compatible displays, w

  • Finding Playlist files

    Hi, I recently had to buy a new hard drive. Before I did I backed up my entire hard drive - I also have my itunes library backed up on a seperate drive. I imported my old library files to restore my playlists but they are incomplete (I think they are

  • HT4623 Phone went dark, no buttons work at all.

    Let the phone sit, went back to it, found it stopped, no power, no buttons work

  • Trial Version of Cp7

    I get the message saying my project will expire because of the trial which is awesome...I think you put that in there with Cp6 and it's great that people know that it will expire and when. My question is...as long as I get the full (or upgrade) versi