Oracle 9ias 1.0.2.2 problems

Hi friends,
I've just installed a 9ias (1.0.2.2) on Linux (Mandrake 8). The installation seemed OK but when I try the Jserv demo link (on the Apache initial page) it gives me an error saying that ".. /servlet/IsItWorking not found".
The Installation Guide only says to start Apache after installation. But it seems to me that there's something else missing.
Can you help me???

if jserv error_log keeps increasing its size every 10 sec or 30 sec while apache is running, something must go wrong. For example, if the servlet engine need to build a database connection but the database is not up, the whole servelt engine can not be started.
You need to investigate the reasons in all configure files, they are
mod_ose.conf
oracle_apache.conf
jserv.conf
jserv.properties
zone.properties
You can comment out some directories in the above files, stop/start apache to narrow the reason.
Best Regards,
--Tao

Similar Messages

Oracle 9iAS MapViewer 9.0.4 image problem

I've just installed Oracle 9iAS MapViewer 9.0.4 preview version.
I am using:
Oracle 9iAS MapViewer 9.0.4 Preview Version
Oracle9iAS (1.0.2.2.1) Containers for J2EE
When i receive picture of map there is no objects on it. On J2ee console i can see following error:
Image is not in 8.1 format
Copy of console report is:
D:\Oracle\iSuites\j2ee\home>java.exe -jar orion.jar -config config\server.xml
A nonfatal internal JIT (3.10.107(x)) error 'Relocation error: NULL relocation target' has occurred
in :
'org/apache/crimson/parser/Parser2.maybeComment (Z)Z': Interpreting method.
Please report this error in detail to http://java.sun.com/cgi-bin/bugreport.cgi
Warning: Error reading transaction-log file (/D:/Oracle/iSuites/j2ee/home/persistence/transaction.st
ate) for recovery: premature end of file
Forced or abrubt (crash etc) server shutdown detected, starting recovery process...
Recovery completed, 0 connections committed and 0 rolled back...
[oracle.lbs.mapserver.oms, INFO] oms servlet document-root path: D:\Oracle\iSuites\lbs\mapviewer\we
b\
[oracle.lbs.mapserver.oms, INFO] No init parameter "oms_config". Will use default.
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
[oracle.lbs.mapserver.core.MapperConfig, INFO] using default config file: D:\Oracle\iSuites\lbs\mapv
iewer\conf\mapViewerConfig.xml
[oracle.lbs.mapserver.core.MapperPool, WARN] destroying ALL mapmaker instances.
[oracle.lbs.mapserver.core.MapperConfig, INFO] Map Recycling thread started.
[oracle.lbs.mapserver.oms, INFO] *** Oracle Map Viewer is successfully started. ***
[oracle.lbs.mapserver.MapServerImpl, INFO] adding a map data src [name=mvdemo]
[oracle.sdovis.CacheMgr, INFO] Setting disk path for cache to: C:\WINNT\TEMP\1\
[oracle.sdovis.CacheMgr, INFO] Java Object Cache opened. Region=Oracle SDOVIS Cache.
[oracle.sdovis.CacheMgr, INFO] max_cache_size=64 M, max_disk_cache_size=512 M.
[oracle.sdovis.ImageCacheMgr, INFO] Setting disk path for image cache to: C:\WINNT\TEMP\1\
[oracle.sdovis.ImageCacheMgr, INFO] MapViewer Image Cache opened. Region=Oracle SDOVIS IMG Cache.
[oracle.sdovis.ImageCacheMgr, INFO] max_cache_size=64 M, max_disk_cache_size=1024 M.
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.CacheMgr, WARN] oracle.ias.cache.CacheException:
null CacheAccess.get
null exception loading geometry from database: errCount = 1
null
Image is not in 8.1 format
at oracle.ias.cache.CacheInternal.exceptionHandler(Unknown Source)
at oracle.ias.cache.CacheLoader.exceptionHandler(Unknown Source)
at oracle.sdovis.CacheGeometryLoader.load(CacheGeometryLoader.java:79)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.sdovis.CacheMgr.get(CacheMgr.java:182)
at oracle.sdovis.JDBCDataSource4PT.loadFeaturesInWindow(JDBCDataSource4PT.java, Compiled Code)
at oracle.sdovis.JDBCDataSource4PT.prepareFeatures(JDBCDataSource4PT.java:184)
at oracle.sdovis.PredefinedTheme.prepareData(PredefinedTheme.java:79)
at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1143)
[oracle.sdovis.CacheMgr, WARN] oracle.ias.cache.CacheException:
null CacheAccess.get
null exception loading geometry from database: errCount = 8
null
Image is not in 8.1 format
at oracle.ias.cache.CacheInternal.exceptionHandler(Unknown Source)
at oracle.ias.cache.CacheLoader.exceptionHandler(Unknown Source)
at oracle.sdovis.CacheGeometryLoader.load(CacheGeometryLoader.java:79)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.sdovis.CacheMgr.get(CacheMgr.java:182)
at oracle.sdovis.JDBCDataSource4PT.loadFeaturesInWindow(JDBCDataSource4PT.java, Compiled Code)
at oracle.sdovis.JDBCDataSource4PT.prepareFeatures(JDBCDataSource4PT.java:184)
at oracle.sdovis.PredefinedTheme.prepareData(PredefinedTheme.java:79)
at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1143)
[oracle.sdovis.DBMapMaker, INFO] **** time spent on loading features: 10047ms.
[oracle.sdovis.DBMapMaker, INFO] **** time spent on rendering: 343ms
Is anybody acquainted with sollution to this problem?
regards
Joze Miklavcic

Are you using an old database, like 8.1.5 or 8.1.6? If you cannot upgrade to 9i, here is the workaround.
In the mapViewerConfig.xml, add the following line to
the <global_map_config> section:
<performance no_unpickler="true" />
So that it looks like:
<global_map_config>
<performance no_unpickler="true" />
</global_map_config>
Then restart oc4j. By the way, you seem to be using oc4j
1.0.2.2, which is too old for mapviewer to work properly (but it is not the cause for the above issue). Please
upgrade to at lease oc4j 9.0.2.
thanks,
lj

I'm having problems installing disk 2 of oracle 9iAS linux edition

I'm having problems installing disk 2 of oracle 9ias linux edition is thier anyone else having this same problem

Is it original media? The first installation disk set i received from oracle had a bad disk 2. Once I received the new set, everything was fine. You may have bad media as well.

Installation problems with oracle 9iAS v1.0.2.2.2a

Dear all, i had been having a problem to install oracle 9iAS v1.0.2.2.2a on Windows 2000 Service Pack 2 edition for the past 5 days.
I had read through the installation guide and follow steps by steps instructions. but the installer would just stop at 100% "Copying welcome.html or Copying demo.gif". It only leave with a step that it would reach the configuration setup. I am wondering anyone encounter this problem.
I had tried to install on notebook and desktop with the same platform. On the notebook, i have oracle 9i database release 2 installed on it. Thinking it might be a compatibility problem, i tried installing oracle 9iAS on a desktop with a oracle 9i database client. But i would want the application server and database to run on the same machine. Should I wait for the oracle 9iAS release 2 for NT or anyone have any advise on my problem.
i would appreicate if anyone can help. thank you.

Maybe this is a bit of a simple question. But, do you remember how long you waited, when the progress bar indicated 100%? The installation progress status does indicate "100%" for a while, doing some "last minute" stuff, before moving on to the "Configuration Tools" phase.
Yes, as Ashesh stated, Oracle9iAS 10222a and Oracle9i Database can co-exist on the same machine, as long as they are in separate ORACLE_HOMEs. And, yes, the structure you described (\oracle\database and \oracle\iASHome) does qualify as "separate ORACLE_HOMEs".
Cheers!

Installing Oracle 9iAS on Windows problem

I've installed 9iAS server using standard Windows installer. Later on, I unistalled it using Oracle installer.
Now I have problem installing it again: i get message: "All Oracle9iAS installations on a host mustbe installed by the same operating system user...". But I AM shure, that previos installation was made whit the same OS user (no other users on my machine:).
How can I reinstall 9iAS?

Alexi -- I'd post that question to the general 9iAS forum. This one in particular is mostly focussed on J2EE/OC4J questions and the standalone distribution.
Someone else in that forum will be able to help you I'm sure.
cheers
-steve-

Problems with url-bindings when redeploying on Oracle 9iAS

Hello!
I'm working on a project where we're having a development server that runs Oracle 9iAS (9.03). This server is used both for system-testing and for continuous integration using Cruisecontrol. The application that we deploy is an ear-application with several web-applications and ejb-components. We have in order to make these two deployments work together defined two different application servers on the console and deployed on both of them. We have also specified prefixes, like /cc/ on the url-bindings so that we can access all the web-applications.
Our problems usually arise when Cruisecontrol does a redeploy of what it has built before it's going to test it. It uses dcmctl for this and it usually runs successfully, but sometimes the application server resets the url-bindings so that all the web-applications go to the root. Other times it removes the whole application and I've even seen it show out-of-memory errors even though it still has about a gigabyte of memory available. I don't think this is related to that single server because I've seen the same thing happening on our production-server the first time I was going to redeploy through the console-application.
Have anyone else had the same problem? (...and hopefully found a solution to it?)
It's quite annoying for us because this screws up Cruisecontrol for us at least once a day and I'm not sure how good this is for a production environment.
Regards,
Bjorn Vidar Boe

Does anybody know if Financial Brokerage Service(FBS) can be deployed on Oracle 9iAS using OEM. I got the following error when I tried to deploy the ear file:
Deployment failed: Nested exception Root Cause: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>. Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>
Thanks ! Hi -
Can you check and see what version of 9iAS are you using?
The ejb-local-ref tag is a new tag introduced in the J2EE 1.3 specification - so you will need to be using the Oracle9iAS v9.0.3 release which is J2EE 1.3 compatible.
If you are using the v9.0.2 release then you will need to upgrade to v9.0.3
cheers
-steve-

Problem installing Oracle 9iAS on Win2000

Hi everybody,
I have problem installing Oracle 9iAS 1.0.2.2.2.a on Win2000.
The process instalation stops when the instalation bar shows 100% complete and copying welcome.html . After that, other processes should start, but it does not happen.
I have installed in an other machine an Oracle 8.1.7 release 3 and I set up parameters as described into documentation. I didn4t applied any patch because I was using release 3 already.
I have 1GB RAM , 1.5 Gb of virtual memory , 2 processors 1,3 Ghz,
and 10 Gb on HD target on both servers(Database and Application Server).
Does anybody have a sugestion ?
Thanks.

Kevin, I don't which version of 9iAS you are trying to install, but as far as I can tell no 9i versions of the application server are certified against Windows 2003, only 10g is certified against Windows 2003. So what's probably happening is the installer doesn't recognize Windows 2003 and thinks it's a non-patched version of Windows 2000. You should either install Windows 2000 SP1 (minimum) or install Oracle 10gAS.

URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

ERROR :
1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
3. Oracle9iASHttpService automatically stops after starting the service
Environment :
Windows 2000 Server
Oracle 9i 9.0.1.1.1
Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
and
Select count(object_name) from user_objects where object_type='JAVA CLASS';
which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

CLOSE_WAIT problems with Oracle 9iAS on Solaris

All,
We have some simple JSP + Sevlets running on Oracle 9iAS on a Solaris server. After the App Server has been running for a couple of minutes we start to get several TCP connections with a CLOSE_WAIT status - as shown by a netstat output.
These seem to be a result of a FIN_WAIT_2 and CLOSE_WAIT pairing eg
Local Remote Swind Send-Q Rwind Recv-Q Status
SERVER.43009 SERVER.80 49152 0 49152 0 CLOSE_WAIT
SERVER.80 SERVER.43009 49152 0 49152 0 FIN_WAIT_2
Over time the FIN_WAIT_2 is removed, leaving the CLOSE_WAITs.
Has anyone else had this problem?
Keith

We're having similar problem. We have lot's of close_wait between Apache and OC4J.
Swetal

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

Setup problem in Oracle 9iAS

I like to install my machine in Oracle 9ias. My machine has the Windows 2000 OS and Oracle 9i DB. When i clicked the Isetup.exe from the cd getting the error
"Setup has detected that your isuite Product Install has not been setup correctly, probably because the installation was aborted Please restart setup"
Please give me some suggestion for installing Oracle 9iAS

Do you have SP 2 or higher ?
Do you want to install only J2EE and Web Cache or another kind of installation ?
Joel Pérez

Problems with Oracle 9iAS in Windows NT version spanish

Hello:
We want to know if anybody has successfully installed Oracle 9iAS in a Windows NT Server (service pack 6) version spanish (not english).
We suspect that the the language of the NT machine (spanish) is the cause of the following error message when we try to configurate the Database Cache of the 9iAS:
"UNABLE TO VALIDATE NT CREDENTIALS"
when we give the password of the administrator user who is logged in NT.
Any help will be very appreciated by us.
Maria Consuelo Franky

Try placing this file in the \WINNT\system32 directory. The builder does not automatically include this file or install in on the new machine.

XML parser Problem in Oracle 9iAS

Dear All,
I am trying to parse a xml file by using a SAX Parser.
I am getting error "oracle.xml.parser.v2.XMLParseException: Invalid InputSource.'. I have already included 'xerces.jar' in the classpath.
But it is always taking oracle xml parser.
How to change the default XML parser in Oracle 9ias.
This is my report.jsp File
<%@ page import="java.io.*,java.util.*,java.sql.*,javax.sql.*,javax.naming.*,javax.jms.*,iims.util.*,javax.xml.parsers.*,org.xml.sax.*,org.xml.sax.helpers.*, org.w3c.dom.*"%>
<%
generateTree();
%>
<%!
     //This method is to be called during startup. It will generate the template and rule nodes.
     public static void generateTree() throws Exception
          //Proceed with this method if the template and rule trees are not built already.
          //if (nodeTemplate != null && nodeRule != null) return;
          // Validate
          Node nodeRule = parseXml("d:\\ora9ias\\j2ee\\home\\Reports\\IIMSReportsTemplate1.xml");
     }//generateTree
%>
<%!
     //parse the input file and return a node.
     private static Node parseXml(String fileName) throws Exception
          //Parse the input file
          Document objDocument = null;
          DocumentBuilder objDocumentBuilder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
          objDocument = objDocumentBuilder.parse(fileName);
          Node nodeRet = objDocument;
          return nodeRet;
     }//parseXml
%>
Report template:
<ROOT>
     <HEADINGS>
          <HEADING1>H1</HEADING1>
          <HEADING2>H2</HEADING2>
          <HEADING3>H3</HEADING3>
          <HEADING4>H4</HEADING4>
          <HEADING5>H5</HEADING5>
          <HEADING6>H6</HEADING6>
     </HEADINGS>
     <ROWSETS>
          <ROWSET>
               <COLHDRS>
               </COLHDRS>
               <ROWS>
               </ROWS>
          </ROWSET>
     </ROWSETS>
     <Footer>
          <PageNo>Generate</PageNo>
          <Date>SystemDate</Date>
     </Footer>
</ROOT>
Stack Trace:
strRuleFileD:\ora9ias\j2ee\home\Reports\IIMSReportsRules.xml
oracle.xml.parser.v2.XMLParseException: Invalid InputSource.
at oracle.xml.parser.v2.XMLError.flushErrors(XMLError.java:145)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:208)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:140)
at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:96)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:165)
at iims.REPORTS.IIMSGenerateReport.parseXml(IIMSGenerateReport.java:115)
at iims.REPORTS.IIMSGenerateReport.generateTree(IIMSGenerateReport.java:
100)
at iims.REPORTS.IIMSGenerateReport.buildXML(IIMSGenerateReport.java:147)
at PCREPORT_PROCESS.processBody(PCREPORT_PROCESS.java:3248)
at PCREPORT_PROCESS.doPost(PCREPORT_PROCESS.java:100)
at PCREPORT_PROCESS.doGet(PCREPORT_PROCESS.java:92)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java
:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Please advise.
Thanks
Siva Kishor Rao U

Adding Xerces XML parser is not enough to make it work. Since some version of JDK (I think 1.4.X) XML parser is included and for older version it can be setup like a runtime option. And this is probably how ORACLE is using its XML parser. If you want to use different parser, you have to pass runtime option to JVM - for Xalan it looks like this:
-Djavax.xml.transform.TransformerFactory=org.apache.xalan.processor.TransformerFactoryImpl
...this way it becomes default parser factory used by javax interface functions. Look for documentation on xml.apache.org
Myrra

Problem Installing oracle 9iAS in Mandrake Linux 8.1

1.When iam trying to install Oracle 9iAS in Mandrake linux 8.1 iam getting the
below error. Pls help me out.
A Initializing Java Virtual Machine from /tmp/OraInstall0/jre/bin/jre.
Please wait...
SIGSEGV received at bffff190
in /tmp/OraInstall0/jre/lib/linux/native_threads/libjava.so.
Processing terminated Writing stack trace to javacore1520.txt ... OK
2.Does Orale 9iAS have Orace Database Server

I don't really understand why you are using almost 6 years old distribution (release date 2002/09/30).
What's the sense? Time has changed and of course SW included in this distro has changed (significantly) and especially glibc.
10g R1 is certified for RH EL 2.1. When I compare version of packages (RH 8 vs RHEL 2.1) it could be possible (easily) to install on RH 8. For 10g R2 you need defintely upgrade at least glibc* packages.

Problems : Oracle 9iAS Installation Windows XP Home Edition

Hi All,
I just installed Oracle 9iAS on Windows XP Home Edition.
Can anyone give me some idea how to resove the issues with the installation.
Infrastructure Database Registration Assistance - Canceled
Please provide either oidpassword or obfuscated password
Usage: java oracle.ias.ldaporacfg.LdaporaCfg Parameters
Parameters are -o OracleHome -h oidHost -p oidPort -u oidUser -w oidPassword -d obfPassword
Infrastructure Schema Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
1) Infrastructure Instance Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
2) Oracle 9i Application Server randomize password - Failed
java.lang.NumberFormatException: %OIDport%
3) Single Sign-on Configuration Assistant - Failed
Parameters passed to ssoca : param0:C:\oracle\as param1:orasso param2:***** param3:aurigadatamart.pacbell.net param4:389 param5:cn=orcladmin param6:***** param7:aurigadatamart.pacbell.net param8:1521 param9:mat param10:AMERICAN_AMERICA.WE8MSWIN1252
Failed to obtain OiD password. Exception is :java.lang.Exception: Version mismatch!
Thanks in advance for your kind help!!
Ramesh

XP is not a supported platform. Please try Win2K or NT.
See certification matrix:
http://otn.oracle.com/software/products/ias/files/20_certification.html
Hope this helps,
Ashesh Parekh
Oracle9iAS Product Management

Oracle 9ias 1.0.2.2 problems

Similar Messages

Maybe you are looking for