Oracle Driver 10.2.0.3 will not run under Java 1.4

While using Oracle Database 10g Release 2 (10.2.0.3) JDBC Drivers my application will not run with Java 1.4
I keep getting an ArrayIndexOutOfBoundsException, followed by a number. Running 10.2.0.3 with Java 1.5 does not give this error. If using Oracle Database 10g 10.1.0.2 JDBC Drivers that error does not occour either.
I am running other applications with 10.2.0.3 with Java 1.4 that does not have this error.
Anyone know about this problem?
Stacktrace:
java.lang.ArrayIndexOutOfBoundsException: 103205256
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:810)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:850)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3384)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:92)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1787)
at org.hibernate.loader.Loader.doQuery(Loader.java:674)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
at org.hibernate.loader.Loader.doList(Loader.java:2220)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2104)
at org.hibernate.loader.Loader.list(Loader.java:2099)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:94)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1569)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:283)
at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:362)
at org.springframework.orm.hibernate3.HibernateTemplate.executeFind(HibernateTemplate.java:332)

Use ojdbc14.jar with JDK 1.4.
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html

Similar Messages

  • JDBC Driver 10.2.0.3 will not run under Java 1.4

    While using Oracle Database 10g Release 2 (10.2.0.3) JDBC Drivers my application will not run with Java 1.4
    I keep getting an ArrayIndexOutOfBoundsException, followed by a number. Running 10.2.0.3 with Java 1.5 does not give this error. If using Oracle Database 10g 10.1.0.2 JDBC Drivers that error does not occour either.
    I am running other applications with 10.2.0.3 with Java 1.4 that does not have this error.
    Anyone know about this problem?
    Stacktrace:
    java.lang.ArrayIndexOutOfBoundsException: 103205256
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java(Compiled Code))
    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:810)
    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
    at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:850)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
    at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3384)
    at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:92)
    at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
    at org.hibernate.loader.Loader.getResultSet(Loader.java:1787)
    at org.hibernate.loader.Loader.doQuery(Loader.java:674)
    at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
    at org.hibernate.loader.Loader.doList(Loader.java:2220)
    at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2104)
    at org.hibernate.loader.Loader.list(Loader.java:2099)
    at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:94)
    at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1569)
    at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:283)
    at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:362)
    at org.springframework.orm.hibernate3.HibernateTemplate.executeFind(HibernateTemplate.java:332)

    I did not know where to put it. I did a search and saw others who had postet here regarding Oracle driver.
    I do not know why it ended up here. I ment to post it at Java » SQLJ/JDBC
    Message was edited by:
    user619696

  • SQL script runs under SQL Devoper, will not run under UNIX, SQLPlus

    I have a sql program I developed under the SQL Developer tool and it runs fine. I have ftp'd the sql to the Unix server and I am trying to run the same program under SQL Plus in unix. The program echo's back the line number that is the last line number in the code before the 'Exception' code in the program and it goes out into never never land.
    I can't figure out why this runs under SQL Developer but will not run under SQLPlus in Unix. Any ideas would be appreciated!!!!

    Assuming that the ftp process did not append any invisible characters(which it usually does) at the end of each line,
    did you put the '/' symbol at the end of your program before running in sql*plus
    something like
    begin
    end;
    /

  • InDesign CS4 will not run under Lion

    I have InDesign CS4 and Design Suite CS3. All my other CS3 apps run under Lion. The Upgrade to Lion failed leaving my internal unbootable, so I installed and migrated to an external drive. But after the upgrade to Lion all of the other CS 3 aps run, IDCS4 will not run. I get the following message:
    Adobe InDesign is missing required system fonts or CMap files. Please reinstall InDesign.
    I used the uninstaller and reinstalled. No affect. I made the Library folder visible. No effect. I cant

    There is a very long list of incompatibilities with Lion:
    http://kb2.adobe.com/cps/905/cpsid_90508.html
    I'm sure there are many more that are unknown.
    FWIW, I highly recommend sticking with Snow Leopard for now and when you do upgrade, do so as a clean install.
    John will be along soon to tell you to ignore the man behind the curtain.
    Bob

  • Time machine will not run under lion

    I read somewhere that one needs a different version of time machine for lion. Where do I get it?

    Good monring all
    Have upgraded a brand new i7 27" imac to the latest OSX 10.7.1.  This is the SSD + 2TB HD iMac.
    When I have been run Time Machine to backup on an external 2TB SATA drive (where the 2TB backup disk is mounted in a NexStar docking station)  Time Machine will make a clean copy of tyhe whole backup structure the first time.  However, subsequent invcrement backups are failing with the error:
    Time Machine could not complete the backup. 
    Unable to complete backup. An error occurred while creating the backup folder.
    Does anyone know what might be causing this please.
    Raymond Haynes
    [email protected]

  • Reposcan x64 will not run under Windows 2008 Server R2....

    Hello,
    When i run from the command line
    reposcan.exe -dbdriver sqlserverdatabasesubsytem -connect u201CUID=xx;PWD=xxxxxxx;DSN=xxxxxxxxu201D -dbkey xxxxxxx -inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D -outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D -outputdir "c:\reposcan logs" -repair true
    reposcan pops up for 1 second and closes, no log outputed
    I have also tried...
    A text file called Reposcan.txt
    -dbdriver sqlserverdatabasesubsytem
    -connect u201CUID=xx;PWD=xxxxxx;DSN=xxxxxxxxxu201D
    -dbkey Linfxxxxxxx
    -inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D
    -outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D
    -repair false
    "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
    none of the above work, any ideas?
    I am running with admin privliage
    Edited by: davitali on Dec 28, 2011 3:58 PM

    Problem solved.
    Solution:
    1. Create two files, Reposcan.bat and Reposcan.txt
    2. In windows 2008 x64, right click on reposcan.bat and select "Run as Administrator"
    3. When running the first time, remove the "-repair" option from reposcan.txt. Check the results in the ouput diectory
    4. Before inserting the repair option, backup CMS, CMS_Audit tables and also the entire Business Objects Directory
    Reposcan.bat
    "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
    Reposcan.txt
    -dbdriver sqlserverdatabasesubsystem
    -connect "UID=xx;PWD=xxxxxx;DSN=xxxxxxxxx"
    -dbkey xxxx
    -repair
    -inputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Input"
    -outputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Output"
    -outputdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\reposcan"

  • Boot Camp Update 2.1 will not run

    I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
    The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
    Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
    I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
    I've searched online but can't seem to find any solution to this particular problem.

    djrichards wrote:
    Thanks for the response, Stefan.
    But that's not what the Apple download page says. Specifically it says the following.
    "Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
    Hi,
    I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
    Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
    Do you have the needed Admin rights when running the update.exe ?
    Stefan

  • CS4 32 bit will not open under Win 7 64 bit.

    Upgraded from Win 32 bit XP to Win 7 64 bit. While in the process of rebuilding my system downloaded and installed Beta versions of CS6 and Bridge for CS6, before trying to install my current CS4 version. I do not know whether this is causing any of the following problems that I am experiencing.　　　　　　　　A short time later I installed CS4, ending up with both the 32 and 64 bit versions of CS4. Interestingly, this install did not install a CS4 version of Bridge in either 32 bit or 64 bit, possibly because the Beta CS6 version of Bridge was installed? 　　　　　
    However, from a previous system backup I was able to retrieve a copy of the CS4 version (presumably 32 bit version) of Bridge, which I simply copied to the new system and found that it works fine. Interestingly now the CS6 version of Bridge loads one of the two CS4 versions and not the Beta CS6, but I cannot tell which one of the CS4 versions. Question: how does one determine whether the loaded version is the 32 or 64 bit version? If I click on System Info it does say X64 which I assume means the 64 bit version is loaded. Is this the way to tell?　　　　　　　　
    The CS4 version of Bridge now apparently defaults to the 64 bit version of CS4 on opens.　　　　　
    I have now read that most if not all my previous plugins will not run under CS4 64 bit, so I really need to be able to run CS4 32 bit. Unfortunately, when I try to open CS4-32, it fails with the following msgs: "Adobe Photoshop CS4 Has Stopped Working." Then,　　　　　
    "Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Photoshop.exe
    Application Version: 11.0.0.0
    Application Timestamp: 48d3882e
    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.6195
    Fault Module Timestamp: 4dcddbf3
    Exception Code: c0000005
    Exception Offset: 0002880f
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt"　　　　　　　　
    The CS4-64 version continues to run as it should.
    Assuming that CS6 will come with a 32 bit version when it hits the market I will be upgrading, but for now I really need a working 32 bit version of CS4.
    Please help.
     

    Help - System Info will tell you whether you're running the 64 bit or 32 bit version (look at the end of the first line).  EDIT:  Note that originally said Help - About and have corrected this.
    Yes, Photoshop CS6 provides both a 32 and 64 bit version.  In fact, it should have installed both on your system.
    Normally the two versions don't get into eachothers' hair, EXCEPT for file associations, which may explain the mixup you're having where Bridge runs the last version installed.  I doubt it has to do with your crash though.
    Have you copied any plug-ins or set an Extra plug-ins folder so that there could be a mixup between the two versions?
    Have you checked to see if your display driver has been updated?  Go to the web site of the maker of your video card and download the version that matches your hardware and OS.  Display driver updates solve many problems.
    -Noel

  • Resman will not run

    I installed NI-VXI 3.3.1 on my Windows 2000 Advanced Server box. My MXI card is recognized by the operating system and finds its driver ok. However, Resman will not run, even when I am logged in as administrator (I already tried allowing all users full control of the VXI for Win32 registry key as recommended on the support site). Running resman simply switches my cursor to the hourglass for about 1 second and then nothing happens. It doesn't even give me an error message of any kind.

    Does the PCI-MXI-2 show up in Measurement & Automation Explorer (MAX), under Devices & Interfaces? If so, can you run Resman from within MAX on that system by clicking the system in Devices & Interfaces and then clicking the Resman button in the right-hand pane toolbar?
    This behavior sounds like what would happen if the driver thought you didn't have any VXI interfaces, so I'm expecting the interface NOT to appear in MAX, or to appear with a black X over the icon. If that's the case I'd be interested in the contents of the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VXI which should help me track down why the interface is not being detected.

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    Try issuing this command in the Terminal application followed by the Return or Enter key:
    drutil eject
    Might take several attempts
    OT

  • Toshiba Satellite L305-S5909 - DVD ROM / CD Drive will not Run CDs

    I have a Toshiba Satellite Model Name: L305-S5909 Part Number: PSLB8U-05302F running Windows Vista 64 with Service Pack 2. The Drive in my computer is, Mat**bleep**a DVD-RAM UJ88OES
    I really don't know when this started but we just discovered that our DVD / CD Drive will not run any CDs or DVDs inserted. When I check My Computer or Windows Explorer the Drive shows up. Also I checked the Device Manager and it's there also. I have tried uninstalling the drive and letting Windows Reinstall it and that did not help. I have also upgraded the computer bios also no results.  And I have tried different disks, cleaning the optical eye, etc. The eject command from the computer works but will not run anything inserted. 
    Any Ideas?

    i had the same problem with my L505D-S5965. you are going to most likely have to replace the dvd drive. the optical eye burned out in mine and from what you have already tried to do to fix it. that is probably what happened with yours. if it is under warranty you can send it to the depot or take it to a toshiba service center near you. if not you can change it yourself.it not to hard.
    hope that helps
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    I can't say personally since I never used AW, but see if these articles help:
    http://www.macworld.com/article/1166370/open_old_docs.html
    http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
    I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
    Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html

  • I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • G5 iMac will not run programs

    Hello again Guys, I'm back......  Just a quick note, Thanks to all who have offered me advice over my past issues.  I have a new one for you.  I recently picked up a G5 20 inch iMac  1.8 PPC  1.5 ram (gonna go pick up another gig today.  Nothing out of the ordinary.  I actually really like this thing.  Anyways, when I picked it up, it was supposed to have 10.5.8 on it and it only has 10.4.11  No real biggie just need to get a hold of a 10.5 disc.  Anyways, here is the issue.  Programs will not open.  If it is a preinstalled program, it runs fine.  If it is a program that I have downloaded, it will not run.  Case in point, I use FILEZILLA ALOT.  I downloaded the PPC version, go to open it, and the icon pops up in the dock, then closes with nothing else.  No crash report, no bug no nothing.  Pops up in the dock then disappears.  Does this with any program that I download.  I already repaired permissions to no avail.....  any ideas?
    Thanks far in advance

    You can first try running Disk Utility and using Repair Disk Permissions (on the First Aid tab).
    Since that iMac came with the system already installed and an existing user account, I would create a new admin user account (in System Preferences Accounts pane).  Make sure it is administrator, not standard.  Log out and log in to the new account.  Try the same thing in that account to see if the problem recurs.
    When you get your Leopard installation disc, I would erase the internal drive and install a clean system.  Whether the above helps or not (with the current system), a brand new system should resolve the problem.

Maybe you are looking for