Oracle eBusiness connector

Hi,
I have just installed the Oracle e Business user Management connector "Oracle_eBus_UM_9041_6728653". While doing trusted reconciliation the users are created in OIM but the User ID in OIM is equal to the UserID in eBusiness whereas it should be username because the users are getting created as 4213, 5212 instead of the user name.
So from where can i change this.
Thanks & Regards,
Arfhan

You can store whatever you want as User Login in OIM.
If you want the Name instead of the Id, just change the reconciliation field mapping for the xellerate User process.

Similar Messages

Oracle EBusiness suite professions tasks and duties

Hello everybody
I inquire about something regarding Oracle EBusiness suite professions tasks and duties. I've tasked by my manager with writing a report lists the main tasks and key responsibilities for each of the following technical professions within Oracle E Business Environment:
1)-Apps DBA.
2)-Apps Technical Consultant (Apps Developer)
3)-Apps Business Consultant.
I've contacted Oracle Support recently via opening SR .But, They informed me that they don’t provide such information and therefore, they suggest me weather to contact Oracle Consulting to post here.
I would appreciate your help.
Sami

I don't see how you'd be able to integrate OAM with EBS unless you have the oSSO (assuming of course that you're not on the bleeding edge, per 975182.1).
We are running the same configuration and have setup the redirects in OAM policy. We setup specific context roots for each application, then use OAM policy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)
Unique authorization rule for each redirect, then a unique "policy" on the "Policies" tab for each redirect. Each Policy maps to the respective Authorization Rule.

Unable to pass parameters from APEX to Oracle EBusiness suite R12 forms

Hi
We are trying to access a standard Oracle EBusiness form i.e. service request and are invoking this Form through a link from APEX.
We are trying to pass parameters via this URL
http://abc.oneapps.com:8010/OA_HTML/RF.jsp?function_id=2037&resp_id=50952&resp_appl_id=170&security_group_id=0&lang_code=US&otherparams=INCIDENT_ATTRIBUTE_15=5206
The EBusiness suite form is launched correctly but we are not able to read the parameter value through custom.pll code.
if (event_name = 'WHEN-NEW-BLOCK-INSTANCE') then
     IF form_name='CSXSRISR' and block_name='SR_BSC_QUERY' then
          FND_MESSAGE.DEBUG('PARAMETER.INCIDENT_ATTRIBUTE_15');
          FND_MESSAGE.DEBUG(' ');
          --FND_MESSAGE.DEBUG(:PARAMETER.INCIDENT_ATTRIBUTE_15);
          lC_incident_number :=name_in('PARAMETER.INCIDENT_ATTRIBUTE_15');
          FND_MESSAGE.DEBUG('Incident Number'||lC_incident_number);
          IF lC_incident_number IS NOT NULL THEN
               copy(lc_incident_number,'SR_BSC_QUERY.INCIDENT_NUMBER');
          END IF;
          FND_MESSAGE.DEBUG(' ');
     END IF;
END IF;
Is this the right way of passing the parameters?
all technical inputs are welcome.
Regards
Sam

Hi
We are trying to access a standard Oracle EBusiness form i.e. service request and are invoking this Form through a link from APEX.
We are trying to pass parameters via this URL
http://abc.oneapps.com:8010/OA_HTML/RF.jsp?function_id=2037&resp_id=50952&resp_appl_id=170&security_group_id=0&lang_code=US&otherparams=INCIDENT_ATTRIBUTE_15=5206
The EBusiness suite form is launched correctly but we are not able to read the parameter value through custom.pll code.
if (event_name = 'WHEN-NEW-BLOCK-INSTANCE') then
     IF form_name='CSXSRISR' and block_name='SR_BSC_QUERY' then
          FND_MESSAGE.DEBUG('PARAMETER.INCIDENT_ATTRIBUTE_15');
          FND_MESSAGE.DEBUG(' ');
          --FND_MESSAGE.DEBUG(:PARAMETER.INCIDENT_ATTRIBUTE_15);
          lC_incident_number :=name_in('PARAMETER.INCIDENT_ATTRIBUTE_15');
          FND_MESSAGE.DEBUG('Incident Number'||lC_incident_number);
          IF lC_incident_number IS NOT NULL THEN
               copy(lc_incident_number,'SR_BSC_QUERY.INCIDENT_NUMBER');
          END IF;
          FND_MESSAGE.DEBUG(' ');
     END IF;
END IF;
Is this the right way of passing the parameters?
all technical inputs are welcome.
Regards
Sam

Error while configuring oracle documaker connector.

We have configured the setting in as per the oracle documaker connector installation document.
the following actions can be performed after the configuration.
1. GENTNW32 is working fine.
2. PDF is generating.
But we are getting the following error while running the GENDAW32.
GenData
Transaction Error Report - System timestamp: Fri Mar 09 19:29:45 2012
DM17115: Warning : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
DM20401: Warning In RULNoGenTrnTransactionProc(): RunDate provided <01-OCT-2008 04:12:5820120309> is not a valid date in YYYYMMDD format. RunDate will be set to current date <20120309>.
FormMaker Data Generation (Base)
Company Name (after ini conversion): abcd-NOT FOUND
Line of Business (after ini conversion): asd-NOT FOUND
DM1002: Warning: BATCHINGBYRECIPINI
Cannot locate INI group <BatchingByRecip> with option <DefaultBatch>.
DM12041: Error : FAP library error: Transaction:<NB>, area:<..\C\genbannr.c,Dec 11 2010 08:50:55,12,0,0,10703>
code1:<0>, code2:<0>
msg:<Script: DEFLIB\AOR_PRET.DAL
Line: 6 Col: 4 Err: 6 Token: #AOR_Debug Msg: Invalid or unknown symbol>.
DM12041: Error : FAP library error: Transaction:<NB>, area:<..\C\genbannr.c,Dec 11 2010 08:50:55,12,0,0,10703>
code1:<0>, code2:<0>
msg:<Script: DEFLIB\AOR_PRET.DAL
Line: 6 Col: 4 Err: 6 Token: #AOR_Debug Msg: Invalid or unknown symbol>.
==> Warning count: 3
==> Error count: 2
End of Transaction Error Report - System timestamp: Fri Mar 09 19:29:46 2012
Elapsed Time: 1 seconds
Please check the INI file configurations:
< BATCH1 >
Printer = Printer1
EnableBatchBanner = True
EnableTransBanner = TRUE
BatchBannerBeginScript = AOR_PREB
BatchBannerEndScript = AOR_POSTB
TransBannerBeginScript = AOR_PRET
TransBannerEndScript = AOR_POSTT
< BATCH6 >
Printer = Printer2
< BatchingByRecip >
Batch_Recip_Def = true;"BATCH2";Office
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = TRUE;"BATCH6";FILE
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< Key1Table >
DOCCDEMO = Key1
< Key2Table >
LIFE = Key2
< PRINT_BATCHES >
BATCH1 = DATA\BRDPDF.BCH
BATCH6 = DATA\BSTPDF.BCH
BATCH2 = DATA\file.bch
< Printer >
EnableBatchBanner = YES
EnableTransBanner = Yes
PrtType = PDF
< Printer1 >
Port = C:\FAP\dll\testwork\DATA\BRDPDF.PDF
EnableBatchBanner = True
     EnableTransBanner = True
     AORDebug = No
     AORExt = .pdf
     AORFilesPerBatch = 1000
     AORPath = c:\AOR\
; Enable a DAL library of scripts to be pre-loaded
PrtType = PDF
< Printer2 >
Port = C:\FAP\dll\testwork\DATA\BSTPDF.PDF
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
Printer = Printer6
the error occued while running the AOR_PREB file. it does not write anything on the database.
Please lhelp us to proceed further on this issue.
thanks,
Ilayaraja

Hi Gaétan/Experts,
Thanks for the post, we are now able to successfully perform the following :-
1. Configure Documaker Connector - After changing lot of values that was provided in the Installation Guide, which seems to be outdated. For E.g. While using SQL Server Driver, the document says we need to configure the Connection as jdbc:microsoft:sqlserver, where as the code looks for the string jdbc:sqlserver.
2. Successfully insert the values to AOR table in SQL Server.
3. Sucessfully run the connector with mock-file-conn-properties, which creates the documents generated thru Oracle Documaker to the specified destination directory.
Issue:_
1. While using the UCM Destination, we are encountering an error which is pasted below.
2. In UCM we are able to create a new document and sucessfully check in using the credentials. The same used thru Connector throws an error.
3. We are using Oracle UCM - 11.1.1.5.
Error_
1828 [Thread-2] ERROR oracle.documaker.ezridc.ImportRequest processResponse - Error importing document
oracle.stellent.ridc.protocol.ServiceException: The content item was not successfully checked in. The authorization token is invalid. It has either expired or is not appropriate for the current request.
You may need to reload an earlier page in order to proceed.
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116)
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92)
     at oracle.documaker.ezridc.ImportRequest.processResponse(ImportRequest.java:200)
     at oracle.documaker.ezridc.Request.executeRequest(Request.java:68)
     at oracle.documaker.ecmconnector.ucmdestination.UCMDestination.importDocument(UCMDestination.java:141)
     at oracle.documaker.ecmconnector.connectorapi.Destination.internalImportDocument(Destination.java:156)
     at oracle.documaker.ecmconnector.connectorapi.Destination.importSingleDocument(Destination.java:138)
     at oracle.documaker.ecmconnector.connectorapi.Source.importDocuments(Source.java:169)
     at oracle.documaker.ecmconnector.engine.ImportChannel.run(ImportChannel.java:72)
     at java.lang.Thread.run(Unknown Source)
Destination Properties_
destination.administration.name=oracle.documaker.connector.destination.UCMDestinationAdministration
destination.name=oracle.documaker.ecmconnector.ucmdestination.UCMDestination
destination.ucm.connectionstring_2000=http\://10.242.196.93/idc/idcplg
destination.ucm.connectionstring_1=http\://10.242.196.93/idc/idcplg
destination.ucm.importmethod=1
destination.ucm.column.map.dRevLabel=1
destination.ucm.password=XXXXX
destination.ucm.username=XXXXX
destination.active.wait=15
destination.ucm.column.map.EXPDATE=dInDate
destination.ucm.column.map.PFILE=primaryFile
destination.ucm.column.map.TYPE=dDocType
destination.ucm.column.map.TITLE=dDocTitle
destination.ucm.column.map.AUTHOR=dDocAuthor
destination.ucm.column.map.NAME=dDocName
Any thoughts?
Thanks
Arumugam

Bug in Oracle Outlook Connector 10,1,1,0,2 (1431) and Oracle Forms 6i Rel 2

Hello,
I installed Oracle Outlook Connector. 10,1,1,0,2 (1431)
We are using Oracle Collaboration Suite on a 10g database.
On the Desktop.
I am using.
a) MS/OFFICE Outlook 2003.
b) Oracle Forms and Reports 6i Release 2.
c) Oracle instance client 10.1
d) Windows XP HOME SP2.
What happens?
1) Oracle Run Time Forms 6i and Oracle/MS Outlook 2003 run fine(Work) when I run them ONE AT A TIME!
2) When I run them together(At the same time) I receive this error message. FRM-40735 ORA-06508.
I have narrowed it down to an Oracle Connector 10g problem.
How did I do that?
In XP Home you can create multi-user accounts.
I created a new user account this time I connected to Microsoft Exchange Server 2000.
Results. Oracle runtime 6i works at the same time as MS Outlook 2003.
I am able to use both Programs at the same time. Without any error messages.
Next Step.
I created a new user account and this time I used an Oracle Connector 10.1g for MS Outlook 2003.
Results: Same error message as before. Ran the application(s) at the same time. FRM-40735 and ORA-06508
Please help with any ideas.
Thank you
Dennis

The product managers look through the forum threads periodically. Some more regularly than others. Since I only look at the forum about once a week, I'm probably the least regular of the PMs. Development also scans the forum, but less regularly.
If you have urgent issues that requires action/response from Oracle, it is better to open an SR with Oracle Support.
Hope that helps,
--Marc

Standard Manager is not working in Oracle Ebusiness Suite 11i

Hi,
Can anyone help me ...
Standard Manager is not picking up any requests in Oracle Ebusiness Suite 11i while other managers are picking up their requests and running it fine.
Regards
Ketan.

Hi Hussein,
I have tried bouncing CM, Cmclean was also executed, but still the same issue exists.
One more thing which i have identified is when i include some concurrent request to Standard Manager , then that request is picked up by standard manager and it is running fine.
But this can be a workaround to the issue. We cannot simply keep on including concurrent request to Standard Manager.
So we are looking for a solution where Standard Manager should automatically pick up the request and run it fine. Which it was doing it earlier.
Regards

How to integrating APEX with the Oracle eBusiness suite release 11i

I need to integrate Apex with Oracle eBusiness Suite Release11. APEX need to use ERP authentication (user name/password) and oracle APEX pages will be called from oracle eBusiness Relese 11i menu.
I have followed metalink doc. 373604.1 and also looked into http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have setup DAD on Apache server, oracle Apps functions/menu and created apex_authorise function and added to my APEX application. I have followed the all the steps from above pdf file.
Here is my issues:
1. When I try to launch a APEX page again it asking me for the user name password
2. If I remove login page from APEX application then I can launch my APEX application but I cannot see any images
3. I need to pass oracle ERP 11i user and responsibility information to APEX. How should I do this?
Any help will be really appreciated
Thanks in advance

Many customers want this and would have hoped that Oracle would have included this as an option. Unfortunately, the left hand(Oracle Apps product managers) don't talk to the right hand(Apex product managers). They totally missed this great opportunity to make life much easier for Oracle Apps customers who have been waiting for this capability that Apex provides. At the present time this is somewhat a black hole. There are people who have figured it out but no one has provided the recipe for everyone else. It's very unfortunate and a complete oversight by Oracle in my opinion. They've got thousands of people developing code but no one had any foresight to see who would use Apex and how they would use it.

What are the tables Oracle EBS connector can connect to?

Hello,
Requirement
As part of the project requirement for Oracle EBS application, we have the concept of BUYER account (PO_AGENTS) and Supplier account (PO_VENDORS). When the account has to be disabled from FND_USER and HR foundation table, the account has to be disabled (or removed based on the requirement) from all linked tables "PO_VENDORS" and "PO_AGENTS".
Questions
1) Does the out of the box Oracle EBS connector handles removing users from the tables "PO_AGENTS" and "PO_VENDORS" apart from "FND_Users" and "HR foundation" table?
2) If no, what are the recommendations for achieving the above requirement?
Thank You!

No, OOTB the connector will not revoke the user entry from tables like PO_AGENTS etc .. You can customize the connector to do that .
Explore the stored procedure which can revoke entries from the mentioned tables and wire it via a adapter .
Regards
Suren

VERY Basic Questions about Oracle eBusiness - what "languages" are used?

Please forgive the very basic nature of this post- (I have been in systems (IT) for over 20 years, so I do have lots of systems experience, but no exposure to this particular software.)
So here are the basic questions - I assume that much of the data base logic is written in PL/SQL, but what other tools / languages are the applications written in?
(Oracle Forms, Oracle Reports, Java, C, something else?)
With over 20 years and experience with a number of other packages, I can learn a great deal about an application by 1. Looking at the DB structures (charts), 2. looking into DB code (Packages, triggers, procedure, functions) and 3. Seeing the screen shots.
None of my customers have had Oracle eBusiness - that have had home grown applications or other COTS/packages.
can anyone suggest a place where an independent person can inexpensively get some exposure?
My sincere thanks for any answers/suggestions.

Hi,
Please refer to the following links for details about the different database releases and Oracle tools.
Oracle Timeline
http://www.oracle.com/timeline/index.html
http://www.oracle.com/oramag/profit/07-may/p27anniv_timeline.pdf
Oracle Corporation - Oracle FAQ
http://www.orafaq.com/wiki/Oracle_Corporation
Oracle E-Business Suite consists of Application/Database/Client tiers, you can find more details in [Oracle Applications Concepts|http://www.oracle.com/technology/documentation/applications.html] manual.
Oracle Forms
http://en.wikipedia.org/wiki/Oracle_Forms
Regards,
Hussein

Integrating Oracle eBusiness Suite with banking services using Oracle SOA

Hi ,
I am working on a project for integrating Oracle eBusiness Suite with banking services using Oracle SOA. We have implemented Oracle SOA and trying to call bank's services using SOA.
The bank has provided its web services over http which accepts XML data as string through HTTPS post invocation and provides response accordingly in string XML Data.
For each service, specific format of request and response message has been provided.
I am trying to call their web services using HTTP binding adapter.
I would like to know whether my approach of calling bank's web service using HTTP binding adapter is correct or not.
Looking ahead for your valuable insight and advice.
Thanks

Hi,
Thank you for your reply.
Is the usage of B2B not applicable for this project ?
Thanks

Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux

Hello there,
It would be great if someone can help me with these questions
1. Which version of Red Hat Linux is suitable for installation of Oracle EBusiness Suite 11i Release 10.2.
2. I am downloading the EBS files from eDelivery site on my machine (Windows based). These are Zip files. How would these be usable on Linux machine?
3. Do I need stuff like MKS Toolkit on Linux? We tried installing on Windows 2003 server but had to abandon because we don't have MKS Toolkit. Is there some such pre-requisite on Linux?
Thank you.
Rahul

Copy all zip files to say /data/stage11i then unzip all files (as root) the process will create the correct file structure, you do not need to run adautostge.pl then in a terminal screen go to /data/stage11i/Disk1/rapidwiz and then type ./rapidwiz the installation wizard then guides you through the rest of the way. Run raoidwiz as root if you need multi user or for the demo single user run rapidwiz as oracle. Make sure you have created user and group for oracle and applmgr, also make those changes in the wizard it often defaults to say user oravis group dba. In linux you should have created localhost.localdomain sometimes the eth0 does not start, stop it in the device manager and then reactivate. Hope that helps.

Installing Enterprise Linux Release 5 x86 (32 bit) for Oracle eBusiness

Hi:
Where do I get installation instruction to install Oracle eBusiness Suite on Linux?
Please help
Ali

Hi Ali,
Refer the below link for Installation guide of 11i E-Busines suite:
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/r115102ins.pdf
For all E-business Suite documents refer the below link:
http://www.oracle.com/technology/documentation/applications.html
Regards,
Xaheer

Oracle Outlook Connector Deployment Problem

I am trying to deploy Outlook 2003 with the Oracle Outlook connector. I am using the Custom installation Wizard provided by the Microsoft Office 2003 Support Tools.
I have set the Oracle connector to piggy-back on the install, however, it will not setup each user automatically. Even using the ini file. You have to manually setup each current user and new users as they come to a new pc.
I want Outlook the CIW to setup the Oracle connector automatically using a .PRF file (Outlook profile file). Unfortunately, with 3rd party connectors, you have to setup the .prf manually. But, other than the white paper provided by Microsoft, there isn't any info on how to manually setup the .PRF file that will setup the connector?
Do I need to call Microsoft (and spend the $250), Oracle, or is there anyone out there that has this info?
Any help would be beneficial to everyone trying to deploy the oracle connector to a large amount of machines without ever having to visit each pc.
Michael Scott
PC/Network Analyst
City of High Point, NC

Not yet. I have issued a TAR with Oracle and have talked to a technician about this problem. He is now meeting with engineers to see if it is possible. I have also been on the phone with a software company called AutoProf and testing their software Profile Maker 8. The tech that I spoke with there is also working with the engineers to come up with a solution. Right now it looks as though some scripting is going to have to occur to get it to work right. I'll keep you posted.

Autonomy Oracle UCM connector to access Oracle UCM 11g

Hi,
How do I setup Oracle UCM 11g instance so that we can test the Autonomy Oracle UCM connector? Are there any specific configurations or do we need to install anything to make Autonomy Oracle UCM connector to access Oracle UCM 11g. Any help is appreciated.
Thanks

Autonomy sells a connector that will index items in Oracle UCM into the IDOL Server. You'll have to check with Autonomy on the versions supported and the cost. With this, you could get UCM information into IDOL just the same as you are doing with HTTPFetch and FileSystemFetch.
As for connecting UCM into the WLP Virtual Content Repository, there is not yet anything provided out of the box. However, you can implement your own CM SPI to provide this or you can wait for the product to provide it. It is my understanding that there will be a VCR integration via the CM SPI coming soon.
Finally, BEACMRepoFetch is basically a pre-configured and privately used instance of FileSystemFetch. This is used by the BEA Content Repository to populate the IDOL Server index for full text searches coming through the VCR full text search API.

Is it possible to download Oracle Ebusiness Suite 11i?

Dear Sirs,
I checked the e-delivery and there is only ebusiness suite 12 for download. Am I missing something? or there is no way I could get Oracle EBusiness 11i?
thanks you
regards

Hi,
I checked the e-delivery and there is only ebusiness suite 12 for download. Am I missing something? or there is no way I could get Oracle EBusiness 11i?Log a SR and ask Oracle Support to send you the Media Pack as 11i software is not longer available for download from Oracle e-Delivery website.
oracle e-business suite release 11.5.10 for windows
oracle e-business suite release 11.5.10 for windows
Regards,
Hussein

Oracle eBusiness connector

Similar Messages

Maybe you are looking for