Oracle xe (windows) and netca

Hi,
I need to create a service. Where did the netca, but in xe is not?
What should I do?
Thanks.

Hi,
You can use ORADIM to create a new service.
Example :-
oradim -new -sid %ORACLE_SID% -intpwd MYSECRETPASSWORD -startmode MRefer : http://download.oracle.com/docs/cd/B19306_01/win.102/b14304/create.htm
- Pavan Kumar N

Similar Messages

Trade-Off Oracle on Windows and UNIX

Hi All,
We are in process to decide whether Oracle database should reside on Windows OR UNIX,
Hence would thankful if anyone can help me with some technical points for favouring UNIX compared to Windows.
-Yasser

OracleNewbie828 wrote:
Does anyone ever have problems / concerns with Windows Server Security Updates? Which to apply, should I apply the Security Updates, etc?When you install an Oracle database, you will need to decide which is more important - your data or your operating system.
If your data, then you will investigate every operating system change individually using such resources as a Test system and My Oracle Support to determine whether you can
- use that operating system
- upgrade the operating system
- patch the operating system
However, most people these days seem to assume that Oracle will be resilient against any changes at the OS. It is a moderately fair assumption, but can (and will) bite at the most inconvenient time.
So to answer your questions
1) Does anyone ever have problems / concerns with Windows Server Security Updates?
I always have concerns with these updates until they have been tested on the test system.
2) Which to apply, should I apply the Security Updates, etc?
Those that have passed regression testing on the test system.
If you do not have a test system, all you need to do is a standard risk analysis: Is it acceptable to you and your organization if an OS patch changes the API in such a way that the database stops working for a period of time? If yes, how long is an acceptable period of time?
As for which (between Linux/Unix/Windows is better - this "Security Updates" question is equally valid in every operating system, so all you need to do is consider your skill set.

Running Oracle on Windows 2008 R2 64-bits and WCF

I'm trying to deploy to a Windows 2008 R2 64-Bits server running AppFabric a WCF 4.0 service that connects to an Oracle 10gR2 database. On my Windows 7 64-Bits, inside Visual Studio 2010, everything goes well. I first started using Oracle ODP.NET and, on deploy, I started getting the:
System.IO.FileNotFoundException: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
File name: 'Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342'
I tried so many things, and nothing seemed to work, and since I'm kinna desperate to get this working, and went to OracleClient, despite the fact that it's marked as deprecated, just to get this working, and buy me time. I removed everything I had installed, but installed just the win64_11gR2_client.zip, with the runtime option. However, than I started getting:
System.DllNotFoundException: Unable to load DLL 'oramts.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
So I reinstalled the win64_11gR2_client.zip, adding the Oracle Services for Microsoft Transaction Server component. But then, whenever I made a call to my WCF service, IIS would crash with the error below:
Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7afa2
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0xb28
Faulting application start time: 0x01cc0b141a857fac
Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 7630c4b0-7707-11e0-8419-00155d010609
If I tried to change the AppPool to enable 32-bits application, the WSDL doesn't even get generated, and I get the:
A process serving application pool 'MyAppPool' suffered a fatal communication error with the Windows Process Activation Service. The process id was '2856'. The data field contains the error number.
I'm lost, and I don't know what to do. How can it be this hard to do a "simple" and typical Oracle set up? What problem would I try to solve? Does anyone know of a blog post that would show how to correctly set this up? I tried looking, but coudln't find anything, and I'm sure I'm not the only one with this problem
Well, any help would be really appreciated. Tks so much

Supported on Win 2008 R2 64bit is only 10gR2( with patchset level 10.2.0.5) and 11gR2. Oracle support will refuse any assistance for earlier versions, that should you keep in mind. Although some people say client is not so critical as the database server.
Werner

How to find the Date and time of Installation of Oracle in Windows?

Hi ,
Is there any way to find the installation Date and time of Oracle in Windows?
Regards
Rajesh

If you have never recreated/restored/reincarnated the database, then CREATED column from v$database should tell you when you created the database.
If you are looking for the date/time of installation of Oracle home, check the logs under OraInventory.
Reply by Satish sir at following link:
installation date/time of a database !!
Hth
Girish Sharma

Dial Up between Oracle on HP-Unix and Oracle on Windows 95

Hello Everybody
I have Oracle Enterprise edition 8.0.4 on HP-Unix and Personal
Oracle 8.0.3 on Windows 95. I want to establish connection
between these two databases through dial-up. I have already
established connectivity through lease line.
I can dial up through Windows machine but I am not able to dial
up through HP-9000 server. Please can anybody guide me. I will be
highly obliged.
Thanks in advance.
Noble.
null

Noble,
This is not the best forum for this question.
Maybe the public news forums would be better,
or Oracle support if it is available to you.
My comments would be:
Oracle has the async v1 and v2 protocol for doing this,
but your best bet is to set up a tcp/ip ppp connection, as used
by 200 million internet users..
This may raise some security concerns, but dialling back to the
server trying to make the connection, as well as the normal
password protection gives some security comfort.
Information on how to do this should be widely available as it is
not Oracle or windows or hp specific.
You can then use a normal tcp/ip connection database link etc..
Turloch
Oracle Migration Workbench Team
Noble (guest) wrote:
: Hello Everybody
: I have Oracle Enterprise edition 8.0.4 on HP-Unix and Personal
: Oracle 8.0.3 on Windows 95. I want to establish connection
: between these two databases through dial-up. I have already
: established connectivity through lease line.
: I can dial up through Windows machine but I am not able to dial
: up through HP-9000 server. Please can anybody guide me. I will
be
: highly obliged.
: Thanks in advance.
: Noble.
Oracle Technology Network
http://technet.oracle.com
null

Doubt with Windows and Oracle Forms 10G and 11g

Hi
I have some doubts in installing Oracle Client on Windows.
a)Can we install Oracle Forms 10g and Reports 10g client on Windows 7?
b)Can we install Oracle Forms 11g and Reports 11g client on Windows XP?
c)If we have an Oracle Forms 11g and Reports 11g, can it connect to a 10g Server?
d)If we have an Oracle Forms 10g and Reports 10g Client, can it connect to an 11g Server?
Please, Can any one help me in this????

a)yes it can be installed on win7, may have some issues on 64bit systems but they're solvable
b)11g had some problems with windows 2000, but didn't see mention of any problems on XP
c)if you mean a database server then yes - i managed to connect 11g to an 8i database, so v10 should not be a problem. If you mean a forms/reports server..well newer forms/reports builder might not want to run old forms/reports and vice versa, but I don't see the point of operating on the same files from different versions. You can still load old form/report source files with a newer builder and recompile them to run on the new server.
d) the "client" is effectively your web browser with a java plugin, unless I misunderstood your question. What version was a form/report compiled with should not be an issue.

Oracle 8i Windows Client and 9i Unix Database server

Is it recommended to use Oracle Windows 8i client against Oracle 9i Database server?
Does anyone have an official Oracle link about this?
Thanks
Dipak

Only by putting an Oracle 8 database between them... You can set up an Oracle 8 database with a dblink to the Oracle 7 database and connect to that via an Oracle 9 client. Not pretty and not particularly efficient, but it'll work in a pinch.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to hide Windows and Oracle Logo?

I'd like to hide Windows and Oracle Logo in Oracle window
https://sites.google.com/site/myoracleproblems/home/screen
or move application higher. Does someone know what to do, if anything?
thanks
m.

Abdetu wrote:
Thanks JeanYves
i found that parameter but didn't know what to set to it i even has no forms in my pc thanks again
Regards,
Abdetu...Hi Abdetu,
There is 3 parameters in the <DevSuiteHome>\forms\server.formsweb.cfg having the same behavior.
Logo
Background
SplashScreen
By default (if you don't have specified them in you [section] they values are inherited from the [default] section) the values are
Logo=
Background=
SplashScreen=
This means you will have the oracle logo, the Forms Services background image in your applet and the oracle splash screen at startup.
*To have nothing shown then just put the value no in front of these 3 parameters*
Logo=no
Background=no
SplashScreen=noYou can also customize that with you own gif files.
For this you have to put your images in a icons.jar file
place it in your <DevSuiteHome>\forms\java where frmall.jar and others are located.
then in your formsweb.cfg :
Archive=frmall.jar, icons.jar
ImageBase=CodeBase
Logo=yourlogo.gif
Background=yourbackground.gif
SplashScreen=yourbeautifullsplachscreen.gifAnd at least if you have a small gif in your icons.jar for the window you can also defining the Icon Filename property in Forms builder. This wile replace the default forms runtime icon.
Hope this helps
JeanYves

Window oracle job scheduler and Oracle server scheduler relationship

Hi Experts,
We use oracle 10G R4 in window 2003 server.
From window server panel,we can see OracleJobSchedulerORCAID server is disable. However, I check oracle Jobs from EM.
I can saw schedule jobs are running in there.
What relationship is between window scheduler server and Oracle Schdeler?
As I know we can stop/start window Oracle database serve,r DBconsle EM server and Listener server in window server to control oracle
.Why window oracle schedule does not affect Oracle schdule job?
Thanks Experts to explaining?
JIm

10g R4 is not an existing Oracle version. 10.2.0.4 is.
Oracle EM has three different schedulers:
- dbms_job
- dbms_scheduler
- EM's own scheduler. Jobs submitted in the EM scheduler are spawned by the Management Agent.
Sybrand Bakker
Senior Oracle DBA

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

Multiple oracle homes on Windows and the "Path" environment variable

Hi There,
We have a windows 2003 database server that has few databases running oracle 10.2.0.3. We are installing oracle 11.2.0.1 on the box as well, and we were wondering, which binaries should come 1st in the path environment variable? and how does this effect the working oracle environment?
Going to the oracle home selector and swapping the 2 oracle homes around will have the same effect on the windows path variable - which will treat the 1st oracle home to be the default home - are there any general rules reg. multiple oracle homes on a server and the default home?
Should the earlier version of oracle always proceed the newer one (i.e. c:\oracle\product\10.2.0.3\bin;c:\oracle\product\11.2.0.1\bin) or should the newer oracle version comes 1st as newer oracle versions are usually backward compatible?
Your thoughts are highly appreciated.
Thanks

That isn't going to happen.
If you install 11.2 last it will appear in the PATH variable first
If you don't want that you need to Oracle Home Selector utility in the Installer to change it.
Obviously, as usual, all of this is documented.
Sybrand Bakker
Senior Oracle DBA

Nagios windows and Oracle environment

Hi Gurus,
I'm planning to implement Nagios tool for SAP monitoring on windows and Oracle environment. Can any one help me on thisu2026u2026..??
Regards
Soumitra

Dear Soumitra,
The only requirement of running Nagios is a machine running Linux (or UNIX variant) and a C compiler. You will probably also want to have TCP/IP configured, as most service checks will be performed over the network.
You can download that suggested plug-in. Extract it and read the Documentation available within that bundle.
The Following links may provide more details.
[http://nagios.sourceforge.net/docs/3_0/quickstart.html|http://nagios.sourceforge.net/docs/3_0/quickstart.html]
[http://wiki.nagios.org/index.php/Main_Page|http://wiki.nagios.org/index.php/Main_Page]
Also check this"Nagios Toolbox for Windows hosts"
[Nagios Toolbox for Windows hosts|http://sourceforge.net/projects/ngtbx/] . Nagios Toolbox for Windows host is still in development.
Regards,
Bhavik G. Shroff

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

I have the new Oracle 8i installer and here is why

I have been trying to get Oracle 8i on Linux and I feel that I
must share
my thoughts on the new Oracle installer with everybody.
I hate the new installer. I used to run the installer from
home over my
128Kbps connection while I was connected to the office machines,
because it
was simple text based. And Oracle 8i has changed all that!
I have nothing against GUI based installers, only when they have
a little too
many animated images that eat up bandwidth. I had to drive all
the way to
the office because I did not have sufficient bandwidth to display
the darn
ringing bell animated image. This is strictly the mentality of
Windows users
who like to work on the console of servers.
And check this out:
line 118 in my install log file at :
/usr/local/oracle/u01/app/oracle/oraInventory/logs/installActions.log
says :
platGroup = WINDOWS
And this is on Linux!!! Maybe the Oracle folks are forgetting
that Linux
users are a little too sensitive to these kind of mistakes. :)
This also supports my theory that the new installer is a gift
from Windows
programmers. Who are not too familiar with the idea of being
able to send
their video display to any computer around the world and work
from there.
A feature every Linux user takes for granted
There are numerous other bugs in the installer and other routines
of Oracle
8i for Linux. Some of them I will list here:
2. The installation types screen list 3 options:
Typical, Minimal and Custom.
Somehow Minimal takes more disk space (642 MB) compared to
Typical (585 MB).
Well that is what the installation screen says. I have not tried
to install
using the minimal install.
3. The installation cant figure out how much free space is
available on the /
partition. Is it that hard? Its gives warnings about how I may
not have
enough space.
4. dbassist cant find the cdrom if you try to install the default
database
from CDROM. It says cannot find CDROM even if you have all your
stuff under
/mnt/cdrom
5. The docs talk about software mount points and data mount
points /u01 /u02
/u03 and /u04 that I created, but I could not find anywhere to
specify them
like I was able to, with the last release.
6. "Oracle Protocol Support" section during the install shows no
options at
all. What happened to good ole Net8?
And many others. This product is a joke.
Atif.
[email protected]
null

My sentiments exactly. There are so many bugs in the
installation of this release that I have just about given up.
And I haven't even started testing the new features yet!
I've tried the install on RedHat 6.0 straight out of the box (no
patches or updates applied) and followed the OIG and release
notes to the letter. Clearly, no one at Oracle did the same,
because there are many problems during install. I finally got a
simple database running, but there are some real gotcha's along
the way.
Here are just a few of the bugs I've encountered:
1. Zero length library file $ORACLE_HOME/lib/libnjni8.so.
Netasst doesn't work without it. Someone said they posted the
source code to the comp.databases.oracle.server newsgroup, but I
can't find it.
2. Database Creation Assistant thinks dbmssql.sql is called
dbmssml.sql.
3. Building the Intelligent Agent with TCL 7.5 causes a cascade
of undefined references when running gmake -f ins_oemagent.mk
agent
4. Database Creation Assistant doesn't understand OFA. It wants
to put all of the database files /u01/app/oracle/oradata/<sid> !
5. Database Creation Assistant will sometimes prevent editing
the data file names to put them in OFA compliant directories.
I am appreciative of the free developer licenses for so many
Oracle products, but this is the worst Oracle install I've had
in 12 years.
Atif (guest) wrote:
: I have been trying to get Oracle 8i on Linux and I feel that I
: must share
: my thoughts on the new Oracle installer with everybody.
: I hate the new installer. I used to run the installer from
: home over my
: 128Kbps connection while I was connected to the office
machines,
: because it
: was simple text based. And Oracle 8i has changed all that!
: I have nothing against GUI based installers, only when they
have
: a little too
: many animated images that eat up bandwidth. I had to drive all
: the way to
: the office because I did not have sufficient bandwidth to
display
: the darn
: ringing bell animated image. This is strictly the mentality of
: Windows users
: who like to work on the console of servers.
: And check this out:
: line 118 in my install log file at :
: /usr/local/oracle/u01/app/oracle/oraInventory/logs/installActio
ns.log
: says :
: platGroup = WINDOWS
: And this is on Linux!!! Maybe the Oracle folks are forgetting
: that Linux
: users are a little too sensitive to these kind of mistakes. :)
: This also supports my theory that the new installer is a gift
: from Windows
: programmers. Who are not too familiar with the idea of being
: able to send
: their video display to any computer around the world and work
: from there.
: A feature every Linux user takes for granted
: There are numerous other bugs in the installer and other
routines
: of Oracle
: 8i for Linux. Some of them I will list here:
: 2. The installation types screen list 3 options:
: Typical, Minimal and Custom.
: Somehow Minimal takes more disk space (642 MB) compared to
: Typical (585 MB).
: Well that is what the installation screen says. I have not
tried
: to install
: using the minimal install.
: 3. The installation cant figure out how much free space is
: available on the /
: partition. Is it that hard? Its gives warnings about how I
may
: not have
: enough space.
: 4. dbassist cant find the cdrom if you try to install the
default
: database
: from CDROM. It says cannot find CDROM even if you have all
your
: stuff under
: /mnt/cdrom
: 5. The docs talk about software mount points and data mount
: points /u01 /u02
: /u03 and /u04 that I created, but I could not find anywhere to
: specify them
: like I was able to, with the last release.
: 6. "Oracle Protocol Support" section during the install shows
no
: options at
: all. What happened to good ole Net8?
: And many others. This product is a joke.
: Atif.
: [email protected]
null

Oracle xe (windows) and netca

Similar Messages

Maybe you are looking for